SENSORS AND ACTUATORS B-CHEMICAL
·
2026
·
IF 8.3
Ying Wang,Wanxiao Wang
Cobalamin (CBL) occurs in several structurally similar forms, among which only hydroxocobalamin, adenosylcobalamin, and methylcobalamin are metabolically active. Due to their subtle structural differences, conventional analytical techniques often struggle to rapidly distinguish active CBL species in complex matrices. To address this challenge, we developed a rapid detection strategy that integrates glutathione (GSH) derivatization with an engineered α-hemolysin nanopore (NNA-αHL). By selectively neutralizing charged residues around the trans opening, the NNA-αHL pore exhibits enhanced resolution, enabling the generation of distinguishable blockade signatures for CBL species. Leveraging the ligand-exchange reactivity unique to biologically active CBL, GSH rapidly converts hydroxocobalamin, adenosylcobalamin, and methylcobalamin into a unified GS-CBL derivative, whereas cyanocobalamin remains unreactive. The reaction between glutathione and active CBLs was first monitored in real time inside the nanopore through continuous ionic current recordings. In a separate workflow, glutathione derivatization was performed prior to nanopore analysis, enabling quantitative determination of bioactive CBLs. The proposed method was successfully applied to milk samples, achieving satisfactory recoveries and demonstrating robust reproducibility. This work establishes an effective nanopore–chemical-derivatization hybrid approach for the rapid and selective analysis of bioactive cobalamin, offering promising potential for applications in food quality control and nutritional assessment.
✓ 已验证
DOI
高影响因子
iScience
·
2026
·
IF 4.5
Zhiyou Wang,Zepeng Huang,Keyu Lv,Linan Lin,Yinping Hu,Yang Zhou,Cai Yuan,Chao Fang,Mingdong Huang
Hirudin is a potent thrombin inhibitor limited by short circulation half-life and bleeding complications. We engineered an FXa-activatable hirudin thrombus-targeted prodrug, yet the N-terminal IEGR peptide introduced unwanted basal activity. After further screening, we found this residual function was fully silenced by a P-selectin-binding peptide upstream of IEGR, with no compromise to FXa-mediated cleavage. Our final construct PXHV2 incorporates both peptides, C-terminal human serum albumin to extend half-life, and an albumin-embedded cyclic RGD sequence for constitutive platelet recruitment. PXHV2 remains catalytically inert until FXa proteolysis restores thrombin-suppressive capacity. In murine electrical and laser-induced thrombosis models, PXHV2 delayed arterial and microvascular occlusion and maintained 120 min pre-injury antithrombotic protection, unlike rapidly ineffective free hirudin. PXHV2 elicited no increase in tail bleeding relative to saline controls. Our data identify PXHV2 as a long-lived, thrombus-selective prodrug with durable efficacy and minimal bleeding risk.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF RARE EARTHS
·
2026
·
IF 9.6
Yizhang Wang,Yu Yao,Ge Qi,Yuwei Ma,Jinxiao Bao,Shuang Li,Qingchun Wang
Developing high-efficiency, low-cost, and stable bifunctional electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is essential for the large-scale industrialization of green hydrogen production. In this work, a novel Ce and Fe co-doped ZIF-8 electrocatalyst (Ce,Fe-ZIF-8) was successfully synthesized through a facile room-temperature ion-exchange strategy. The as-prepared catalyst retains the characteristic rhombic dodecahedral morphology of the ZIF-8 framework with a refined particle size of ∼86 nm and highly dispersed active sites. Benefiting from the synergistic electronic modulation between the rare-earth Ce and the transition metal Fe, Ce,Fe-ZIF-8 demonstrates outstanding bifunctional activity in 1.0 mol/L KOH electrolyte. Specifically, it requires overpotentials of only 242 mV (OER) and 96 mV (HER) at 10 mA/cm 2 . When utilized as both the anode and cathode for overall water splitting, the Ce,Fe-ZIF-8||Ce,Fe-ZIF-8 system achieves a current density of 10 mA/cm 2 at a remarkably low cell voltage of 1.58 V, surpassing the performance of commercial Pt/C||RuO 2 . Furthermore, the catalyst exhibits robust electrochemical stability for over 200 h of continuous operation. This work provides a facile and effective strategy for designing high-performance metal-organic framework (MOF)-based bimetallic electrocatalysts for sustainable energy conversion applications.
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Xinyi Ji,Dongzhi Zhang,Jieshuo Zhai,Zekang Zhang,Xiaomin Niu,Shunjie Ran,Xingyan Shao,Yong Zhang
● A SnO 2 /CuO sensor was fabricated, achieving an ultrafast 3 s response to CO. ● First-principles confirm heterojunctions greatly boost stability and moisture resistance. ● The proposed device is highly promising for lithium-ion battery safety monitoring. Carbon monoxide (CO) is a major harmful gas emitted by industry and a typical gas causing air pollution, which damages the natural environment and threatens human health. Therefore, it is of great practical significance to design a CO sensor with fast response speed and high sensitivity. In this paper, a composite sensor material of SnO 2 and CuO was prepared by a hydrothermal method, and the SnO 2 /CuO sensor was constructed. The morphology and phase structure of the SnO 2 /CuO composite were analyzed by XRD, SEM, and XPS, and the sensing properties of the SnO 2 /CuO sensor toward CO were studied experimentally. The optimal doping ratio of the SnO 2 /CuO sensor is 10%, and the optimal working temperature for detecting CO is 280 °C. The SnO 2 /CuO (10%) sensor has a response value of 3.5 for 200 ppm CO, short response, and recovery times (3 s/27 s), and a detection range of 5–1000 ppm for CO. The SnO 2 /CuO (10%) sensor exhibits excellent long-term baseline resistance stability, and its moisture resistance has been significantly improved compared to pure SnO 2 sensors, demonstrating outstanding sensing performance. Supported by first-principles calculations and sensing mechanism modeling, it was revealed that the enhancement in gas-sensing performance primarily originates from the formation of heterojunctions between SnO 2 and CuO. In this study, the proposed sensor demonstrates tremendous potential for early gas warning in lithium-ion battery thermal runaway. Download: Download high-res image (161KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2026
·
IF 8.3
Long Bai,Beibei Lv,Xiuxiu Wu,Haohao Chen,Jinsong Yu,Ziqing Ye,Min Yuan,Hui Cao,Liling Hao,Fengqin Yin,Bing Bai,Tai Ye,Fei Xu
Excessive multi-site confinement impairs induced-fit Cd 2+ aptamer binding. • Ag-MOF/Pen co-regulation balances structural rigidity and binding flexibility. • Interfacial anchoring and H-bond regulation enhance apparent affinity 16.1-fold. • Label-free fluorescence enables accurate Cd 2+ analysis in pea seedling tissues. Aptamer immobilization can improve structural stability, but excessive confinement may restrict the conformational rearrangements required for induced-fit target recognition. A key challenge is therefore to stabilize recognition-competent conformations while preserving the structural adaptability required for binding. Using a Cd 2+ aptamer as a model, we first demonstrated that conventional multi-site immobilization increased the apparent dissociation constant by approximately eightfold relative to the free aptamer. To address this issue, we developed a surface-imprinting strategy that confines the aptamer within hydrogel through single-point tethering of the aptamer while modulating its local microenvironment. The Cd 2+ -bound aptamer was first assembled on Ag-MOF, followed by hydrogel polymerization in the presence of penicillamine. During imprinting, Ag-MOF promoted localized aptamer anchoring, while penicillamine regulated the hydrogen-bonding network surrounding the Cd 2+ -aptamer complex. Subsequent Cd 2+ removal generated an imprinted microenvironment that partially preserved the preorganized recognition conformation without over-constraining flexible regions required for rebinding. The optimized hybrid exhibited an apparent dissociation constant of 0.19 μM, corresponding to a 16.1-fold decrease relative to the free aptamer, and reached binding equilibrium within 10 min. Integration with label-free Tb 3+ -sensitized fluorescence enabled Cd 2+ detection with a limit of detection of 0.7 nM, approximately 1.1–1114-fold lower than nine representative reported methods, while maintaining satisfactory selectivity and reproducibility. The method was further validated by quantifying Cd²⁺ in different tissues of hydroponically grown pea seedlings and food matrices, with results consistent with ICP-MS. These results establish moderate, microenvironment-assisted confinement as a general design principle for balancing conformational stabilization and induced-fit adaptability at aptamer recognition interfaces. Download: Download high-res image (212KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Sustainable Materials and Technologies
·
2026
·
IF 9.7
Chengzhi Liu,Zhiran Xu,Xianhua Wu,Nan Jiang,Yueyue Li,Chuang Xu,Lei Xu,Yifei Xiang,Zhengmin Liang,Jiakang He
Bacterial infection, oxidative stress, and persistent inflammation impede wound repair, and antibiotic-dependent treatment may promote the emergence of bacterial resistance. We developed an infection-adaptive, near infrared (NIR) regulated self-healing hydrogel dressing (PACH) comprising polydopamine anchored silver nanostructures (PDA@Ag) within a dynamic Schiff base network of carboxymethyl chitosan and oxidized hyaluronic acid. Because Methicillin-resistant Staphylococcus aureus (MRSA) secretes hyaluronidase during infection, the oxidized hyaluronic acid network was designed to undergo infection-adaptive degradation; NIR-induced photothermal heating further loosened and disassembled the network, thereby increasing the accessibility of PDA@Ag-related antibacterial components. PDA@Ag exhibited enhanced NIR absorption and photothermal performance (ΔT _max = 35.7 °C at 0.75 W/cm 2 ). PACH protected fibroblasts against H₂O₂ induced oxidative injury, promoted fibroblast migration, and attenuated inflammatory responses in lipopolysaccharide stimulated macrophages. In vitro, PACH exhibited potent antibacterial and antibiofilm activity against MRSA, with 808 nm irradiation reducing relative bacterial viability to 0.001%. In an MRSA infected full-thickness wound model, PACH with NIR reduced relative bacterial viability to 1.42 ± 0.59% on Day 3 and residual wound area to 2.518 ± 0.97% on Day 14, and enhanced re-epithelialization, collagen deposition, angiogenesis, and macrophage polarization toward a reparative phenotype without evident systemic toxicity. PACH is therefore a bio based hydrogel that forms in water at room temperature without organic solvents and provides antibacterial treatment without conventional antibiotics. These findings support an integrated dressing strategy for bacterial control and wound repair. Download: Download high-res image (148KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
RARE METALS
·
2026
·Vol. 45
·期 9
·e70545
·
IF 12.1
Hao Yao,Lin Fu,Jingqian Wang,Yishuo Hui,Chunliang Yang,Yuanjian Li,Shuo Geng
en This link goes to a English section zh This link goes to a Chinese section Ultrathin sodium (Na) metal anodes (< 40 μm) with superior electrochemical performance are essential in developing high-energy-density sodium metal batteries (SMBs). Nonetheless, Metallic Na's poor processability hinders its practical application. Hence, a dual-phase interpenetrating reinforcement strategy is proposed to fabricate sodium/sodium phosphide–carbon nanotube (Na/Na 3 P5-CNT10, NNP5C10) composite foils with controllable thickness (40−15 μm) by mechanical kneading operation. Sodium phosphide (Na 3 P) is in situ formed through a pressure-induced reaction between red phosphorus (RP) and metallic Na. The resulting Na 3 P and carbon nanotube (CNT) are uniformly embedded within the Na matrix to form an interpenetrating Na 3 P-CNT framework. Na 3 P impedes dislocation motion, whereas CNT provides interfacial lubrication and crack-bridging, enabling smooth separation and reliable thinning of the composite foil. This mixed-conductive framework accelerates ionic/electronic transport, lowers the Na nucleation barrier, and homogenizes Na deposition. As a result, a symmetric cell employing 30 μm-thick NNP5C10 composite foils achieves a long-term cycling stability of 2500 h at 0.5 mA cm −2 and 0.5 mAh cm −2 . When paired with a Na 3 V 2 (PO 4 ) 3 (NVP) cathode, the full cell with a 20 μm-thick NNP5C10 anode achieves a high energy density of ∼276 Wh kg −1 at 0.2C with a low negative-to-positive (N/P) capacity ratio of ∼1.9. This study demonstrates a viable pathway in fabricating ultrathin Na metal anodes with high capacity, thereby promoting the development of high-energy-density SMBs. 摘要 en This link goes to a English section zh This link goes to a Chinese section 电化学性能优异的超薄钠(Sodium,Na)金属负极(< 40 μm)是实现高比能钠金属电池(Sodium metal batteries,SMB)的关键。然而,金属钠较差的加工性严重限制了它的实际应用。因此,本研究提出一种双相互穿增强策略,通过机械捏合工艺制备出厚度在15~40 μm范围内可控的钠/磷化钠-碳纳米管(Na/Na 3 P5-CNT10,NNP5C10)复合箔。红磷(Red phosphorus,RP)与金属钠应压反应原位生成Na 3 P,并与碳纳米管(Carbon nano tube,CNT)均匀分散于钠基体中,共同构筑出Na 3 P-CNT互穿增强的结构。Na 3 P通过抑制位错运动提高复合材料的强度,碳纳米管则通过界面润滑和裂纹桥接作用改善复合材料的塑性变形行为,从而实现复合箔的可控减薄。此外,构建的Na 3 P-CNT结构能够促进离子和电子传输,降低钠沉积成核势垒,进而实现均匀钠沉积。因此,采用30 μm厚的NNP5C10复合电极组装的对称电池在0.5 mA cm −2 电流密度和0.5 mAh cm −2 面积容量条件下稳定循环超过2500小时。20 μm厚NNP5C10复合负极与Na 3 V 2 (PO 4 ) 3 (NVP)正极匹配组装的全电池在0.2C倍率下实现约276 Wh kg −1 的能量密度,负极/正极容量比(Negative-to-positive capacity ratio,N/P)低至约1.9。本研究为高容量超薄钠金属负极的构筑提供了一种有效的策略,从而推动了高比能钠金属电池的发展。
✓ 已验证
DOI
高影响因子
Journal of Environmental Sciences
·
2026
·
IF 6.5
Haiju Feng,Yafei Huang,Yao Guo,Jianqiang Gan,Yang Ou,Longhua Xu,Jia Tian,Zhoujie Wang,Kaiqian Shu,Yi Luo
Removal of toxic Be 2+ from multiple competing ions systems was achieved using a calcium-crosslinked sodium alginate hydrogel. • The SA/Ca 2+ hydrogel exhibited a maximum theoretical adsorption capacity of 80.37 mg/g for Be 2+ at 25 °C. • The pronounced selectivity of the SA/Ca 2+ hydrogel toward Be 2+ was verified in competitive multi-ion systems. • Sustainable recovery of Be 2+ was realized using citric acid as a green desorbent. Efficient removal of beryllium from industrial wastewater is of great importance for environmental protection and water security. However, existing adsorbents often exhibit limited adsorption capacity and insufficient selectivity, posing challenges for the efficient separation of Be 2+ from complex wastewater systems. In this study, a Ca 2+ -crosslinked sodium alginate hydrogel (SA/Ca 2+ ) was developed for high-capacity adsorption and selective separation of Be 2+ . At pH 6.0 and 25 °C, the SA/Ca 2+ hydrogel achieved a maximum Be 2+ adsorption capacity of 80.37 mg/g. Notably, in the presence of multiple competing ions (Li + , Mg 2+ , Mn 2+ , Zn 2+ and Cd 2+ ), the SA/Ca 2+ hydrogel exhibited a high distribution coefficient for Be 2+ (K d = 1.60 × 10 4 mL/g), demonstrating its excellent selective adsorption toward Be 2+ . Moreover, the adsorbent could be effectively regenerated using citric acid through repeated adsorption-desorption cycles while maintaining stable performance, demonstrating favorable sustainability and application potential. Mechanistic analysis revealed that Be 2+ immobilization was mainly driven by coordination interactions with oxygen-containing groups, including carboxylate and hydroxyl groups, together with ion exchange with Ca 2+ in the crosslinked network. The density functional theory (DFT) calculations further confirmed the higher binding stability of the SA - -Be complex, revealing the molecular origin of the hydrogel’s selective capture of Be 2+ . This fruitful research demonstrated that the SA/Ca 2+ hydrogel can achieve high-capacity and selective Be 2+ removal, offering a green and effective strategy for the advanced treatment of beryllium-containing wastewater. Download: Download high-res image (517KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Materials Today Bio
·
2026
·
IF 11
Xuehai Chen,Yibo Ying,Yuchao Zhang,Jiali Lv,Minghao Jiang,Yujun Mo,Zhiyi Wu,Huixin Lin,Zhiyang Huang,Dawei Jiang,Yanming Zuo,Xiaokun Li,Zhouguang Wang
Mitochondrial dysfunction and defective repair are central drivers of secondary injury following spinal cord injury (SCI), yet effective strategies to restore mitochondrial quality control remain limited. Here, we develop an engineered long-acting fibroblast growth factor 21 fusion protein (SFGF21) by incorporating a linker peptide to enhance molecular targeting and oxidative stability. In a mouse model of SCI, sustained delivery of SFGF21 specifically potentiated dynamic crosstalk between mitochondria and lysosomes, thereby activating the BNIP3/BNIP3L pathway-mediated mitophagic flux and clearing dysfunctional mitochondria in injured neurons. This process restored mitochondrial homeostasis, suppressed lipid peroxidation, and alleviated oxidative stress in injured neurons. Loss-of-function experiments confirmed that both FGFR1 and BNIP3 are required for SFGF21-induced mitophagy and neuroprotection. Together, our findings establish engineered modulation of organelle crosstalk as a therapeutic strategy to activate mitophagy and support neural repair after SCI, highlighting mitochondria-targeted protein engineering as a potential therapeutic path for spinal cord repair. Download: Download high-res image (349KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2026
·
IF 3.6
Xinquan Zhao,Shisheng Li,Xinshu Zhang,Zhi Gao,Yi Du,Wanying Lei
Exploring efficient, stable, and earth-abundant electrocatalysts toward the oxygen evolution reaction (OER) is a central theme for realizing industrial application of water splitting. In this study, a 1D@2D heterostructure of Co 9 S 8 -Ni 3 S 2 @CoFe LDH/NF is constructed via hydrothermal and electrodeposition approaches, where ultrathin CoFe LDH nanosheets are interconnected and deposited onto Co 9 S 8 -Ni 3 S 2 nanorod arrays. This 1D@2D microstructure benefits from the exposure of a large number of accessible reactive sites. The strong interaction between the sulfide hybrid and LDH material could modulate the electronic structure of Co 9 S 8 -Ni 3 S 2 @CoFe LDH and generate a high concentration of high-valence metal sites. As a result, the optimal catalyst exhibits superior OER performance with a low overpotential of 189 mV at 10 mA cm −2 , a small Tafel slope of 30.22 mV dec −1 , and good stability in alkaline solution. This work opens up a possibility for obtaining efficient and cost-effective electrocatalysts for clean energy production through water splitting. Graphical Exploring efficient, stable, and earth-abundant electrocatalysts toward the oxygen evolution reaction (OER) is a central theme for realizing industrial applications of water splitting. In this study, a 1D@2D heterostructure of Co 9 S 8 -Ni 3 S 2 @CoFe LDH/NF is constructed via hydrothermal and electrodeposition approaches, where ultrathin CoFe LDH nanosheets are interconnected and deposited onto Co 9 S 8 -Ni 3 S 2 nanorod arrays. This 1D@2D microstructure benefits from the exposure of a large number of accessible reactive sites. The strong interaction between the sulfide hybrid and LDH material could modulate the electronic structure of Co 9 S 8 -Ni 3 S 2 @CoFe LDH and generate a high concentration of high-valence metal sites. As a result, the optimal catalyst exhibits superior OER performance with a low overpotential of 189 mV at 10 mA cm −2 , a small Tafel slope of 30.22 mV dec −1 , and good stability in alkaline solution. This work opens up a possibility for obtaining efficient and cost-effective electrocatalysts for clean energy production through water splitting.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Foods
·
2026
·Vol. 15
·期 17
·3118
·
IF 6
Binchen Wang,Naihui Dong,Siyu Xue,Yuxuanwen Zhao,Chaofan Ji,Beiwei Zhu,Sufang Zhang
Ethyl carbamate (EC) is a widely recognized carcinogen present in fermented foods, and enzymatic degradation is a safe and effective strategy for its reduction. An EC-degrading esterase derived fromAcinetobacter calcoaceticus(AcECH) was previously identified. However, volatile ester compounds in Chinese Baijiu compete with EC for enzyme binding, thereby affecting degradation efficiency and flavor quality. In this study, molecular docking, molecular dynamics (MD) simulations, enzyme kinetics, bio-layer interferometry (BLI), and gas chromatography–ion mobility spectrometry (GC-IMS) were employed to investigate the substrate specificity of AcECH. Based on computational prediction and experimental validation, F157G has been identified as the most suitable mutant for improving substrate recognition. Compared with the wild-type enzyme, the degradation rates of ethyl acetate, ethyl valerate, and ethyl hexanoate decreased to 64.23%, 49.28%, and 34.08%, respectively. Meanwhile, F157G showed enhanced apparent binding affinity toward EC while largely maintaining EC hydrolytic activity, and reduced the degradation of desirable volatile esters, indicating an altered substrate preference of AcECH.
✓ 已验证
DOI
高影响因子
JOURNAL OF CONTROLLED RELEASE
·
2026
·
IF 12.4
Pan Long,Fei Han,Yan Wu,Zaiyuan Zhang,Tingrui Zhang,Yuancheng Zhao,Mengshan He,Yonghe Hu,Xilin Li
Clinical management of acute corneal alkali burns is limited by tear washout and the failure of monotherapies to break the inflammation-neovascularization cycle. To address this, we developed a thermosensitive hydrogel (PRP/QR@gel) co-loaded with platelet-rich plasma (PRP) and quercetin (QR). The low-viscosity precursor adaptively fills irregular defects and solidifies around ocular surface temperature, establishing a tear-resistant drug depot. Mechanistically, the rapid release of hydrophilic PRP drives ordered corneal remodeling via the PI3K/Akt/mTOR pathway. Concurrently, the sustained release of hydrophobic QR scavenges ROS, suppresses NF-κB-mediated inflammation, and blocks HIF-1α/VEGF-driven pathological neovascularization. In a rabbit alkali burn model, PRP/QR@gel accelerated complete epithelialization within 7 days and reduced clinical opacity scores by 50%. This in situ-forming hydrogel offers a translatable solution for severe ocular chemical injuries.
✓ 已验证
DOI
高影响因子