CARBOHYDRATE POLYMERS
·
2022
·
IF 10.723
Yan Li,Yun Liu,Ziqian Liu,Xin Wan,Hui Chen,Jinrong Zhong,Yue-Fei Zhang
Here we report an efficient strategy to separate and recycle acid blue 93 (AB93) from mixed anionic dyes selectively within sodium hydroxide activated A/CS adsorbent (N-A/CS). This work broke the common sense that the larger the specific surface area, the better the adsorption property is, which provided an alternative strategy to separate dyes. The adsorption equilibrium of AB93 could be achieved approximately within 1–2 min, and the maximum adsorption capacity was up to 2500 mg/g. Besides, it can be activated continuously and reused at least 15 times. In mixed anionic dyes, the adsorption selectivity of N-A/CS on AB93 in the mixture of AB93 and acid fuschin (AF) reached up to 99.7 %. Molecular dynamics simulation revealed that the trend of adsorption energy for dyes qualifies well with the experimental order of adsorption capacities and molecular sizes among five anionic dyes based on molecular matching effect. Thus, N-A/CS is a low-cost, easily-preparable, significantly-effective-and-reusable adsorbent, providing a promising “size-matching” strategy to adsorb multi-component dye systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Pharmaceutics
·
2022
·Vol. 14
·期 10
·2147
·
IF 6.525
Zhijun Guo,Dan Sun,Xian Zhou,Huan Xu,Yizhou Huang,Chenglin Chu,Baolong Shen
In this work, a facile direct current atmospheric pressure micro-plasma (APM) technology was deployed for the synthesis of functional gold nanoparticle/chitosan (AuNP/CS) nanocomposites for the first time. Different experimental parameters, such as metal salt precursor concentration and chitosan viscosity, have been investigated to understand their effects on the resulting nanocomposite structures and properties. The nanocomposites were fully characterized using a wide range of material characterization techniques such as UV–vis, transmission electron microscope (TEM), Fourier transform infrared (FTIR) spectra and X-ray photoelectron spectroscopy (XPS) analyses. Potential reaction pathways have been proposed for the nanocomposite synthesis process. Finally, potential of the synthesized nanocomposites towards photothermal conversion and bacteria eradiation applications has been demonstrated. The results show that APM is a facile, rapid and versatile technique for the synthesis of AuNP/CS functional nanocomposites. Through this work, a more in-depth understanding of the multi-phase system (consisting of gas, plasma, liquid and solid) has been established and such understanding could shine a light on the future design and fabrication of new functional nanocomposites deploying the APM technique.Keywords:atmospheric pressure micro-plasma;plasma induced liquid chemistry;gold nanoparticles;chitosan;nanocomposites;photothermal conversion;antibacterial
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MACROMOLECULAR CHEMISTRY AND PHYSICS
·
2022
·Vol. 224
·期 2
·2200272
·
IF 2.996
Feiyue Hao,Xieraili Maimaitiyiming,Shuang Sun
3D printing of hydrogels with improved mechanical properties will play an important role in many fields in the future. Polyacrylamide with controllable reaction conditions and chitosan with increased mechanical strength are chosen to prepare hybrid hydrogels with high mechanical properties (elongation >2000%). The addition of sodium carboxymethyl cellulose enables this hydrogel system to have excellent rheological properties for 3D printing. The samples prepared by 3D printing technology have larger elongation (>1000%) and higher elastic modulus (141.99 kPa). Carbon nanotube-added composite hydrogels can be used to fabricate flexible electronic devices with diverse functions and structures. The prepared sensor can detect the signals of human movement (joint movement, breathing, drinking water), and has a sensitive signal response in the range of 12–67 °C. In addition, this sensor can also be extended to the application of NH 3 gas signal sensing. Due to the stable performance and long service life of conductive multifunctional hydrogels, the application potential of hydrogel sensors will be further increased. In conclusion, this simple-prepared 3D-printable high-mechanical-performance hydrogel with multiple network crosslinks has a favorable competitive advantage in future flexible material applications.
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Taotao Qiang,Boqiang Qiu,Lu Chen,Longfang Ren
In this work, a novel adsorbent for the removal of hexavalent chromium (Cr(VI)) in aqueous solution was successfully prepared by altering the 2D Ti 3 C 2 /chitosan composite with disodium ethylenediaminetetraacetate (EDTA·2Na) agent. The successful surface loading of chitosan on Ti 3 C 2 was demonstrated by various characterization methods, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). The adsorption of Cr(VI) by Ti 3 C 2 -based composite under various circumstances was evaluated using batch adsorption experiments. The adsorption performance of the optimal sample for Cr(VI) was investigated in detail through different influencing factors, and the adsorption process was analyzed by adsorption kinetics and isotherm model. In addition, XPS analysis of adsorbents before and after adsorption showed that some Cr(VI) was reduced to Cr(III) during the whole process, which was conducive to reducing the biological toxicity of Cr(VI). The mechanism analysis showed that the adsorption was mainly electrostatic physical adsorption, supplemented by chemical reduction adsorption. Finally, through the regeneration cycle experiment, it was found that the adsorption rate of Cr(VI) remained above 80% after six repeated adsorptions, indicating that the composite material had good stability and might have certain practical application value in the treatment of Cr(VI)-containing wastewater.
✓ 已验证
产品关联
DOI
高影响因子
SCIENTIA HORTICULTURAE
·
2022
·
IF 4.342
Jiahua Ma,Yahya Faqir,Yunlong Chai,Sanmei Wu,Tong Luo,Shiyu Liao,Abdul Rasheed Kaleri,Chengjia Tan,Yuxin Qing,Mohammad Talib Kalhoro,Niaz Umer,Wazir Hadir
Agriculture lands have low fertilizer retention owing to porosity and irrigation, whereas a significant portion of fertilizer is lost through denitrification, volatilization, surface run-off, and leaching, causing losses of nutrients to air and ground/surface water. Urea fertilizer readily enhances the agricultural yield but also deteriorates the quality of fertile soils. To combat such problems, researchers are seeking to formulate controlled-release or slow-release fertilizers. We used chitosan microspheres as a carrier to encapsulate urea through emulsification and cross-linking techniques to reduce the wastage of urea fertilizer due to evaporation and water flow. Scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy were used to characterize chitosan microspheres and urea-loaded microspheres. Chitosan microspheres and urea-loaded microspheres were authenticated by FT-IR, showing 89% of urea successfully incorporated with chitosan microspheres. Then an experiment was run to compare the effects on plant growth, antioxidant and metabolite contents with and without added nitrogen fertilizer. Various amounts of urea per pot were applied to Chinese cabbage, including T1 0.5433 g, T2 0.6033 g, T3 0.8033 g, CK 0.00, while the same content of urea in chitosan microspheres as T4, T5, T6, and T0 (no urea), respectively. The results indicated that chitosan microspheres-based controlled release nitrogen fertilizers (Cm-CRNFs) had higher seed germination (96%), plant height (17.04 cm), number of leaves (11.00), and leaf length (110.19 mm) as compared to urea and control treatments. In addition, Cm-CRNFs treatment enhanced net photosynthetic rate, stomatal conductance, transpiration rate, fluorescence, dark respiration rate, total sugar, proteins, flavonoids, and polyphenols. Overall, Cm-CRNFs showed promising results in all treatments for all tested physiochemical and growth parameters. It is concluded that controlled release urea fertilizers based on chitosan microspheres can be developed with a simple process. The fertilizers are biocompatible, economically viable, and environment-friendly, and have the potential to prolong the release of macronutrients and micronutrients for plant growth.
✓ 已验证
产品关联
DOI
高影响因子
Regenerative Biomaterials
·
2022
·
IF 5.763
Xu Pei-Yao,Kankala Ranjith Kumar,Li Yue-Wei,Wang Shi-Bin,Chen Ai-Zheng
Despite the success, it is highly challenging to battle against pathogenic biofilms-based chronic bacterial infections by conventional antibiotic therapy. Herein, we report a near-infrared (NIR)/acid-induced nanoplatform based on chitosan (CS)-coated indocyanine green (ICG, photosensitizer)/luteolin (LUT, a natural quorum sensing inhibitor) nanocomposites (ICG/LUT-CS) as antibacterial and antibiofilm agents for skin wound healing. Initially, the ICG/LUT nanoplatforms are prepared by the supercritical antisolvent technology and coated with the CS layer. The obtained ICG/LUT-CS with ultra-high encapsulation efficiency exhibited more favorable photothermal conversion effects and improved NIR laser/acid dual-induced drug release behavior than individual modalities, achieving exceptional bacteria-killing and biofilm elimination effects. Moreover, the ICG/LUT-CS realized the synergetic effects of chemotherapy and photothermal therapy outcomes for wound healing. Together, our findings provided an appealing strategy for the rapid preparation and future translational application of ICG/LUT-CS as an ideal agent for fighting against biofilm infections.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Today Bio
·
2022
·
IF 10.761
Yu-Wei Ge,Min Chu,Zi-Yang Zhu,Qin-Fei Ke,Ya-Ping Guo,Chang-Qing Zhang,Wei-Tao Jia
In situ regeneration of large-segment bone defects is a difficult clinical problem. Here, we innovatively developed magnetically oriented micro-cellulose fibres using nano-hydroxyapatite/chitosan (CEF/Fe 3 O 4 /HA/CS) and loaded an NFκB pathway inhibitor on the surface of magnetically oriented cellulose fibres (CEF/Fe 3 O 4 /HA/CS/PQQ) prepared as a layered bioscaffold. CEF/Fe 3 O 4 /HA/CS/PQQ was constructed by layering HA/CS sheets. Nano-hydroxyapatite was deposited on the surface of cellulose fibres, then the magnetic nanoparticles on the cellulose fibres were aligned on the surface of chitosan under a magnetic field. Oriented cellulose fibres enhanced the compressive properties of the scaffold, with an average maximum compressive strength of 1.63 MPa. The CEF/Fe 3 O 4 /HA/CS/PQQ layered scaffold was filled into the body, and the acute inflammatory response (IL-1β and TNF-α) was suppressed through the early sustained release of PQQ. The CEF/Fe 3 O 4 /HA/CS/PQQ-layered scaffold further inhibited the osteoclasts differentiation. It was further found that the nano-hydroxyapatite on the surface of oriented cellulose fibres promoted the formation and migration of new blood vessels, accelerated the processing of collagen-I fibres to cartilage, and endochondral ossification. Hence, the development of the CEF/Fe 3 O 4 /HA/CS/PQQ layered scaffold with oriented fibres guides bone growth direction and pro-osteogenesis activity and provides a novel strategy for the in situ regeneration of large segmental bone defects.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2022
·
IF 10.723
Shuping Wu,Kanghui Li,Weijian Shi,Jiawei Cai
Nanofibrous membrane have great potential in the field of water purification due to the high porosity and large specific surface area. Herein, a dual layers nanofibrous membrane was prepared by combining an active layer containing carbon nanotubes (CNTs) with a porous chitosan (CS)/polyvinylpyrrolidone (PVP)/polyvinyl alcohol (PVA) nanofibrous support layer via electrospinning-electrospray technique for highly efficient heavy metal and organic pollutants removal. Incorporating CNTs into the active layer offered additional nanochannels which significantly enhanced pure water permeate flux (1533.26 L·m −2 ·h −1 ) and heavy metal ions/dyes rejection (Cu 2+ 95.68 %, Ni 2+ 93.86 %, Cd 2+ 88.52 %, Pb 2+ 80.41 %, malachite green 87.20 %, methylene blue 76.33 %, and crystal violet 63.39 %). The optimal membranes were formed with a thickness of 20 μm and a roughness of 142 nm while still showing good perm-selectivity compared with commercial PVDF membrane. Moreover, the constructed membrane exhibited good antifouling property and long-term stability during filtration process. This work provides a new strategy to fabricate advanced separation membranes for water treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER DEGRADATION AND STABILITY
·
2022
·
IF 5.204
Xinyu Cui,Quan Wu,Jun Sun,Xiaoyu Gu,Hongfei Li,Sheng Zhang
A boron-based biological flame retardant phenylboronic acid functionalized chitosan (B-CH) was prepared by reacting chitosan (CH) with 4-formylphenylboronic acids. The structure characterization was carried out by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis. B-CH was added into polylactic acid (PLA) by the melt blending method to improve the fire performance of the composite. The results showed that the peak heat release rate (PHRR) of PLA-7% B-CH decreased to 432 kW·m −2 from 564 kW·m −2 of control PLA. The limiting oxygen index (LOI) was increased from 19.1% to 26.2%, and the vertical burning test (UL-94) could reach a V-0 rating. The B-CH participated in the char formation process, which could generate a continuous compact char layer during the combustion to effectively protect the PLA matrix. This work provided an effective strategy to develop environmental friendly flame retardant PLA composites.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Shiyuan Fan,Yi Wan,Zihe Zhao,Hongwei Wang,Zhenbing Ji
A current, gradually growing trend is to use bioactive ceramics to develop new bone scaffolds to replace traditional bone implants. Biphasic calcium phosphate (BCP), a mixed material of hydroxyapatite and tricalcium phosphate, has limited osseointegration ability. Therefore, improving the bioactivity and osteoinductive ability of BCP scaffolds through various surface modification methods is an important issue. Polydopamine (PDA) coating, chitosan (CS) coating, and their composite coatings have been previously reported to individually possess a good ability to improve scaffold bioactivity, but few comparisons between them and the optimal coating sequence of PDA and CS have been reported. Herein, we fabricated a BCP scaffold by using a self-made 3D printer, sintered the scaffold, and then prepared PDA, CS, PDA/CS and CS/PDA coatings by solution immersion. Afterwards, the surface morphology , element composition and proportion, compressive strength and surface contact angle of the five groups of scaffolds were characterized. Finally, the adhesion, proliferation and osteogenesis-related gene expression levels of MC3T3-E1 on the five groups in vitro were evaluated in detail. The results showed that the five types of scaffolds were fabricated successfully and that the PDA/CS and CS/PDA coatings had different surface morphologies. The compressive strengths of the composite-coating groups were higher than those of the single-coating groups and the BCP group. The CCK-8 experiment revealed that the composite coatings can promote the initial adhesion and proliferation of cells. The detection results of three osteogenesis-related genes (OCN, COL-1 and Runx-2) proved that the composite coatings had a synergistic effect in promoting osteodifferentiation and that the CS/PDA coating had the greatest effect in improving cell viability and promoting osteogenic differentiation.
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2022
·
IF 5.876
Qiao Deng,Xiaocong Wang,Meiqi Shao,Lin Fang,Xiaojing Zhao,Jingjing Xu,Xu Wang
Although various nano-adsorbent have been developed for sewage treatment, only a few adsorbents possess antibacterial activities. We aimed to synthesis a double-purpose nano-adsorbent with adsorption and antibacterial activity. Magnetic composite materials (Fe 3 O 4 @ZIF-8@SiO 2 ) with a porous crystalline state and large specific surface area were synthesized. Chitosan (CS) with broad-spectrum antimicrobial activity was used to functionalize the magnetic metal-organic framework nanocomposites . Fe 3 O 4 @ZIF-8@SiO 2 @CS were produced of low cost, mild conditions without any calcination step. Fourier transform infrared spectroscopy , scanning electron microscopy, the Brunauer-Emmett-Teller method, transmission electron microscopy , vibrating sample magnetometry , thermogravimetric analysis , X-ray diffractometry and X-ray energy dispersive spectrometry presented evidence that a new porous adsorbent Fe 3 O 4 @ZIF-8@SiO 2 @CS is rich in –NH 2 and C S and have specific surface area of 420.58 m 2 /g. Fe 3 O 4 @ZIF-8@SiO 2 @CS has loose crystals, thermodynamically stable and well-defined structures, which are used for Congo red (CR) adsorption and bacterial cell killing. We determined optimal adsorption conditions by adjusting adsorption time, pH and ionic strength . Fe 3 O 4 @ZIF-8@SiO 2 @CS shows a good adsorption capacity of CR, reaching 310.4 mg/g at 298 K. The adsorption kinetics and adsorption isotherm obeyed the General-order kinetic (GO model) and Liu model, respectively. The Fe 3 O 4 @ZIF-8@SiO 2 @CS can remove dyes from simulated dye effluent, and it can be reproduced easily without centrifugation or filtration, with the adsorption efficiency exceeded 70% even after five cycles. Fe 3 O 4 @ZIF-8@SiO 2 @CS exhibited antibacterial activity against Staphylococcus aureus and Bacillus subtilis . Double-purpose Fe 3 O 4 @ZIF-8@SiO 2 @CS can be a potential material for wastewater treatment .
✓ 已验证
产品关联
DOI
高影响因子
DRUG DELIVERY
·
2022
·
IF 6.819
Peng Sun,Haoliang Wu,Hao He,Liwei Zhang,Yuanfeng Liu,Cong Zhang,Chunyang Lou,Jingan Li,Hualong Bai
Neointimal hyperplasia is a complex process after vascular interventions, acute platelet deposition and smooth muscle cell proliferation both contributed to this process. There are still no perfect solutions to solve this problem. Rivaroxaban is a novel anticoagulant that has been widely used in clinic, it has a good pharmacological effects both in vivo and in vitro. Chitosan microparticle rapamycin (MP-rapa) was fabricated, interspaces of polyglycolic acid (PGA) scaffold were used as a reservoir of MP-rapa, and the scaffold was coated with hyaluronic acid rivaroxaban (MP-rapa-riva). Scanning electronic microscopy (SEM) photographs were taken and water contact angles were measured, rat inferior vena cava (IVC) patch venoplasty model was used; patches were harvested at day 14 and examined by immunohistochemistry and immunofluorescence. SEM photographs showed the microparticles rapamycin were inside the interspace of the scaffold, hyaluronic acid rivaroxaban was also successfully coated onto the surface of the scaffold. There was a thinner neointima, fewer proliferating cell nuclear antigen (PCNA) positive cells, fewer macrophages in the MP-rapa and MP-rapa-riva grafts compared to the control PGA graft. The result showed that this scaffold with dual anticoagulation and antiproliferation functions can effectively inhibit venous neointimal hyperplasia, although this is an animal experiment, it showed promising potential clinical application in the future.
✓ 已验证
产品关联
DOI
PubMed
高影响因子