RSC Advances
·
2020
·Vol. 10
·期 4
·1956-1965
·
IF 3.119
Weiqi Xie,Shiwen Huang,Donglin Tang,Shumei Liu,Jianqing Zhao
A furfural-based DOPO-containing flame retardant, 6,6′-(((methylenebis(4,1-phenylene))bis(azanediyl))bis(furan-2-ylmethylene))bis(dibenzo[c,e][1,2]oxaphosphinine 6-oxide) (MBF-DOPO), was synthesized and utilized as a co-curing agent of 4,4′-diaminodiphenyl methane (DDM) for fire-safe epoxy thermosets. For the cured epoxy resin containing 4.0% MBF-DOPO, the limiting oxygen index (LOI) reached 32.9% (with the V-0 rating in UL-94 test), and the peak heat release rate and total smoke production values were respectively decreased by 29.3% and 33.6%, compared to pure epoxy resin. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) results confirmed that the furfural-based flame retardant MBF-DOPO promoted the charring formation of the epoxy matrix, which effectively isolated the gas and heat transfer during combustion and thus enhanced the fire-safety performance of the epoxy thermosets. This work provides an effective route for synthesizing a furfural-based flame retardant, which possesses great potential for application in fire-safe epoxy thermosets.
✓ 已验证
DOI
高影响因子
Materials Research Express
·
2020
·Vol. 7
·期 3
·036201
·
IF 1.929
Hui Yu,Xinan Shi,Lijian Huang,Xiaojiao Kang,Daocheng Pan
A series of Eu3+ and Tb3+ co-doped CaMoO4/SrMoO4 luminescent thin films were prepared by a facile solution method, and they were annealed at 550 °C for 2 h. The luminescent properties of the thin films were studied, which involve the energy transfer from Tb3+ to Eu3+. The emission color can be changed from green to red, with increasing Eu3+ doping concentration in Tb3+-doped CaMoO4/SrMoO4 thin films. In addition, it was observed that the PL intensity of Eu3+ will enhance when Tb3+ ions are incorporated into Eu3+-doped CaMoO4/SrMoO4 thin films. The optical band gaps of the luminescent thin films are found to be in the range of 4.49 to 4.72 eV. These results revealed that Eu3+ and Tb3+ co-doped CaMoO4/SrMoO4 luminescent thin films have a significantly potential application in electroluminescent devices.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2019
·Vol. 166
·期 12
·A2654
·
IF 3.12
Lei Zhang,Dandan Zhu,Hongyu Wang
Solvent dramatically affects the behavior of anion intercalation into graphite electrode in dual-ion batteries (DIBs). Our previous studies have confirmed that the intercalation of ethylene carbonate (EC) solvated PF6− is considerably suppressed. However, in this letter, we show that EC can apparently co-intercalate with PF6− into graphite electrode once ethyl methyl carbonate (EMC) is involved inside. In situ X-ray diffraction (in situ XRD), ex situ XRD, fourier transform infrared (FTIR) spectroscopy and electrochemical impedance spectroscopy (EIS) have been carried out to clarify the underlying reason.
✓ 已验证
DOI
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2022
·
IF 3.428
Yao Tian,Chunmei Zeng,Shiyu Yang,Yang Luo,Lunhong Ai,Jing Jiang
Development of efficient and economical non-precious metal catalysts for dehydrogenation of ammonia borane is an important way to store and release hydrogen. Vacancy-engineered defective catalysts with modulated electronic structure allow ideal adsorption and dissociation of reactant molecules for the optimized catalytic activity. In this study, we report a facile synthesis of cobalt-defective Co 3 O 4 (V Co -Co 3 O 4 ) nanocatalyst by the calcination of layered cobalt glycerate as a key precursor. The stacked cobalt-oxygen sheets and interlayer bound glycerate anions in a layered structure are favorable for introducing cation vacancy during calcination process. The obtained V co -Co 3 O 4 exhibits outstanding catalytic activity for the hydrolysis of ammonia borane, along with a high hydrogen production rate of 934 mL min −1 g Cat -1 and a low activation energy of 32.65 kJ mol −1 . The catalytic performance of the V Co -Co 3 O 4 catalyst can be well maintained for consecutive five cycles. The current study establishes a new example of cation vacancy strategy to facilitate the hydrolysis of ammonia borane for hydrogen generation.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Penghua Qin,Zhen Wu,Pengyu Li,Dian Niu,Minghua Liu,Meizhen Yin
The construction of chiroptical materials with controllable chirality is of special importance in biology and chemistry. Although tunable chirality can be realized in various systems, it remains a fundamental challenge to realize multimodulated chiral inversion. Herein, we report that chiral alanine derivative and fluorescent cyanostilbene derivative co-assemble to prepare supramolecular chiral systems, where twist nanofibers with totally inverted supramolecular chirality and circularly polarized luminescence are obtained through stoichiometric modulation. The supramolecular handedness can be inverted by means of altering the cooling rate and incorporating metal ions. The mechanism study reveals that the synergistic effect among hydrogen bonds, coordination interactions, and π–π stacking interactions contributes to the chirality inversion. This work establishes an effective strategy to precisely modulate supramolecular chirality in multiple ways, which shows great potential in developing smart chiroptical materials capable of achieving complex functionalities.
✓ 已验证
DOI
高影响因子
Small
·
2024
·
IF 13
Songzhu Xing,Xujiao Ma,Qingqing Gu,Nana Ma,Zhong Zhang,Guoying Han,Rui Huang,Xiao Feng,Bing Yang,Chunying Duan,Yiwei Liu
The construction of defective sites is one of the effective strategies to create high-activity Metal–Organic frameworks (MOFs) catalysts. However, traditional synthesis methods usually suffer from cumbersome synthesis steps and disordered defect structures. Herein, a cluster–cluster co-nucleation (CCCN) strategy is presented that involves the in situ introduction of size-matched functional polyoxometalates (H 6 P 2 W 18 O 62 , {P 2 W 18 }) to intervene the nucleation process of cluster-based MOFs (UiO-66), achieving one-step inducement of exposed defective sites without redundant post-processing. POM-induced UiO-66 ({P 2 W 18 }-0.1@UiO-66) exhibits a classical reo topology for well-defined cluster defects. Moreover, the defective sites and the interaction between POM and skeletal cluster nodes are directly observed by Integrated Differential Phase Contrast in Scanning Transmission Electron Microscopy (iDPC-STEM). Owing to the molecular-level proximity between defective sites and POM in the same nano-reaction space, {P 2 W 18 }-0.1@UiO-66 exhibits efficient tandem catalysis in the preparation of γ-valerolactone (γ-GVL) from laevulinic acid (LA) by the combination of Lewis and Brønsted acids with 11 times higher performance than defective UiO-66 formed by conventional coordination modulation strategy. The CCCN strategy is applicable to different POM and has the potential to be extended to other cluster-based MOFs, which will pave a new way for the construction of functional MOFs with multi-centered synergistic catalysis.
✓ 已验证
DOI
PubMed
高影响因子
Nano Research
·
2024
·Vol. 17
·期 6
·4834-4843
·
IF 9.5
Guo Zhiren,Zhang Xiao,Li Xinyuan,Cui Chang,Zhang Zilei,Li Hansheng,Zhang Dongxiang,Li Jinying,Xu Xiyan,Zhang Jiatao
Photocatalytic oxidation techniques are promising for degradation of the highly ecotoxic and refractory isothiazolinone bactericides in relevant industrial wastewaters. However, low charge separation and directional transport efficiency under solar light radiation restrain their practical application. Here, we report a nanostructured photocatalyst doped with Gd and B in TiO 2 with carbon incorporation and defect formation through incomplete calcination. The specific surface area, grain size, and hydrophilicity of TiO 2 are improved, which is beneficial for the interfacial reaction between the photocatalyst and pollutants. The reduction of the bandgap, the broadening of the photo-absorption range, and the retarded electron-hole recombination promote the photocatalytic performance due to the improved oxygen vacancies based on the electron distribution modification. The difference in partial density of states (ΔPDOS) between the current catalyst and raw TiO 2 indicates that the co-doping of Gd and B with incomplete calcination changes the electronic hybridization of conduction band and valence band near the Fermi level, and affects the band gap energy. It improved charge separation and directional transport efficiency and benefited the formation of main active species, including OH and O 2 − , for the pollutant decomposition. The rate of photocatalytic removal of benzisothiazolinone (BIT) by the current photocatalyst reaches 1.25 h −1 , being 4.31 times that of TiO 2 . The current work offers a constructive approach to the design and synthesis of nanostructured photocatalysts for the photocatalytic degradation of refractory organic pollutants.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
·
2022
·Vol. 46
·期 14
·19686-19696
·
IF 4.672
Feng Wang,Yinrong Lv,Xueli Bai,Shengjian Zhang,Huifang Wang,Baoyi Li,Aifang Liu,Xiaoping Zhang
Summary Polyhydride electrocatalysts integrated directly into metal substrates have attracted attention because they can provide high electrochemical specific surface area and excellent mechanical properties. In this work, through the classical hydrothermal method and subsequent phosphating procedure, we synthesized for the first time an electrocatalyst with a pyramid-shaped MnCO 3 as the main structure, P and Co as co-doping elements, named Co, P-MnCO 3 , and used it as hydrogen evolution reaction (HER). The experimental results show that the excellent catalytic activity in alkaline media, with current densities of 10 and 200 mA∙cm −2 at 61 mV and 158 mV and low overpotentials, which are better than P-Co (108/234 mV) and P-MnCO 3 (175 mV/340 mV), etc. it has more electrochemically active sites, faster charge transfer rate and lower resistance. The excellent electrochemical properties benefit from the unique highly active binary Co, P-MnCO 3 pyramid brick sites shortened the ion transfer distance and optimized synergistic effect between the doped metal elements (Co,P between MnCO 3 ), the porous connection between Co, P-MnCO 3 and the high conductivity substrate, increased the electron-transfer efficiency between the substrate and material, accelerating the conversion of H + to H 2 ; facilitated the release of bubbles and provided excellent mechanical properties for improved catalyst stability. This work provides a new idea for the synthesis of multi-element electrocatalysts.
✓ 已验证
DOI
高影响因子
ChemistrySelect
·
2024
·Vol. 9
·期 17
·e202401101
·
IF 1.9
Xiangming Hu,Zhenyu Yang,Mingyue Wu,Yuntao Liang,Wei Wang,Fusheng Wang,Qian Zhang,Jingran Mao,Ning Yang,Xuwei Wang
Graphical This paper selectes MBioFs with copper ions as the metal center to design an MBioFs/PANI composite suitable for CO gas sensors. The morphology and nanostructure of the prepared materials were thoroughly analyzed, followed by testing their gas-sensing properties. Subsequently, the gas sensing mechanism of composite materials was proposed and discussed in detail. In addressing the issue of poor gas sensitivity in semiconductor CO sensor materials used in mining, such as pure PANI. This study utilized an ice-water bath in combination with an in-situ polymerization method to synthesize a new composite material consisting of Cu(II)-racemic glutamate nanofibers and PANI. The morphology, structure, and chemical bonds of the composite material were analyzed using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and spectral analysis. The material's ability to detect CO (100–500 ppm) at room temperature was investigated, revealing a response value of up to 6.8 % for 400 ppm CO detection when the composite material was deposited on a ceramic interdigital electrode. The material exhibited good selectivity and responsiveness to CO detection at room temperature, attributed to the heterojunction formed between Cu(II)-racemic glutamate nanofibers and PANI, which enhanced carrier migration. Consequently, the Cu(II)-racemic glutamate nanofiber/PANI composite(Cu(II)-RGlu/PANI) material shows promise as a high-performance sensing material for CO detection at room temperature and as a low-power, integrable sensor material for underground coal mines. This research contributes to the development of a theoretical framework for such applications.
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2019
·Vol. 186
·期 5
·1-9
·
IF 5.479
Walekar Laxman S.,Zheng Mingda,Zheng Longhui,Long Mingce
Highly fluorescent carbon quantum dots co-doped with selenium and nitrogen (SeN-CQDs) were fabricated via a one-pot hydrothermal route using selenomethionine as the sole precursor. The SeN-CQDs aggregates have sizes between 30 and 45 nm and display blue fluorescence with a quantum yield of 8% at excitation/emission wavelengths of 350/445 nm. The fluorescence is pH dependent and decreases under acidic conditions. The doping of the CQDs with selenium and nitrogen was proven by X-ray photoelectron spectroscopy (XPS). Fluorescence is selectively quenched by perfluorooctanoic acid (PFOA), and this is accompanied by a decreased fluorescence lifetime. Quenching is not due to aggregation in view of the unaltered sizes of nanoparticles as revealed by TEM and DLS analyses. UV-vis absorption titration suggested the formation of an excited state complex between SeN-CQDs and PFOA, and quenching originates from the internal electron transfer in the excited state complex. The method was used to detect PFOA quantitatively in the linear range of 10–70 μM with a 1.8 μM detection limit. The nanoprobe has a high selectivity for PFOA over potentially interfering molecules. The practicability of the method was ascertained by accurate detection of PFOA in real samples by the standard addition method. The method may be further improved by tuning the interaction between PFOA and SeN-CQDs through optimizing the doping and the surface composition of the SeN-CQDs.
Schematic presentation of a fluorometric method for perfluorooctanoic acid detection by using a selenium and nitrogen co-doped carbon quantum dots as the fluorescent probe.
✓ 已验证
DOI
高影响因子
MACROMOLECULES
·
2023
·
IF 5.5
Fengbo Zhu,Shanhao Feng,Zequn Wang,Zhichao Zuo,Shilei Zhu,Wenwen Yu,Ya Nan Ye,Meng An,Jin Qian,Zi Liang Wu,Qiang Zheng
Polyelectrolyte (PE) hydrogels are ubiquitous in nature. Tailoring the interactions between PE gels and salt provides versatile implements to overcome their critical drawbacks such as weak and brittle nature. Adding salts to PE gels introduces both counterions and co-ions, and the variations of PE chain conformations and their macroscopic properties have been mainly attributed to the interplay between PE charged groups and their counterions, yet the role of co-ions is generally ignored. This work demonstrates that by changing co-ion species with larger atomic sizes, monovalent haloids are capable of triggering the phase separation of common poly(acrylic acid) single network (PAAc-SN) hydrogels into polymer-sparse and polymer-rich regions, accompanied by remarkable enhancement in strength and toughness. The capabilities of co-ions inducing phase separation of PAAc-SN gels follow a reverse Hofmeister series: Cl– < Br– < I–. Due to the enhanced polymer–polymer interactions and viscoelastic energy dissipation, the phase-separated PAAc-SN gels exhibit exceptional mechanical properties, with fracture stress and tearing energy of 96.7-folds and 1636-folds larger than those of the as-prepared gels, respectively. The largest fracture stress and tearing energy reach 8.8 ± 1.3 MPa and 29.8 ± 2.4 kJ/m2, exceeding most state-of-the-art PE hydrogels. A combination of FTIR, 1H NMR, and all-atom molecular dynamics simulations reveals that the reverse Hofmeister series-aided phase separation originates from changes of network chain conformation through the following influences rooted in the larger size of co-ions: (i) enhancing hydrophobic polymer–polymer interactions; (ii) accelerating the ion pair formation between carboxyl groups and their sodium counterions. These results not only provide a new method for hydrogel strengthening and toughening but also emphasize the significant role of co-ions in tuning the properties of PE gels.
✓ 已验证
DOI
高影响因子
JOURNAL OF FORESTRY RESEARCH
·
2013
·Vol. 24
·期 4
·741-746
·
IF 0
Zhang Ming,Xu Yang,Wang Shu-liang,Shi Jun-you,Liu Chang-yu,Wang Cheng-yu
We improved the overall performance of fast-growing poplar by utilizing a low-cost, effective and simple method. The fast-growing poplar was modified by a vacuum-pressure impregnation method with three types of modification solutions composed of phenol-melamine-formaldehyde (PMF) co-condensed resin, diatomite, and 3-aminopropyl (diethoxy) methylsilane. We measured the weight percent gain (WPG), bulking, leaching, anti-swelling efficiency (ASE), water-repellent effectiveness (WRE), and oxygen index of the modified specimens. All of the wood physical properties, which are beneficial for human uses, were significantly improved by the treatment. We improved various characteristics of wood and the oxygen index of poplar above 48.6% after the modification using diatomite and PMF co-condensed resin.
✓ 已验证
DOI