INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Zheng Wu,Jun Shi,Pingan Song,Jingguo Li,Shaokui Cao
Ti 3 C 2 MXenes, a novel two-dimensional material, have attracted lots of attention in biomedical filed for its large surface area and excellent near-infrared (NIR) responsiveness. In this paper, a pH/near-infrared (NIR) multi-responsive drug delivery platform consisted of hollow hydroxyapatite (HAP), chitosan (CS)/hyaluronic acid (HA) multilayers, gold nanorods (AuNRs) and MXene had been fabricated via a layer-by-layer (LbL) approach. Chitosan/hyaluronic acid multilayers were deposited on the surface of hollow HAP to retard the burst release of DOX in the initial delivery stage. MXenes and AuNRs equipped on the surface of hybrid matrix greatly enhanced the photothermal conversion efficiency of the microcapsules. Due to the collapse of electrostatic force among chitosan/hyaluronic acid multilayers and the dissolution of HAP under acidic condition, as well as the synergistically enhanced photothermal effect between MXene and AuNRs, HAP/CS/HA/MXene/AuNRs microcapsules exhibited outstanding pH-/NIR-responsive drug delivery properties. The present paper provides an attractive method to prepare chitosan/hyaluronic acid based pH/NIR multi-responsive hybrid microcapsules with excellent photothermal conversion efficiency and biocompatibility, which has great potential in the field of remotely controlled drug delivery.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Rui Zhou,Haoran Song,Daoyuan Zu,Shiting Pan,Yuwei Wang,Fangxian Wang,Zhuo Li,Yongming Shen,Changping Li
The self-floating Ti 3 C 2 MXene-coated polyurethane sponge (MXene@PU module) was prepared via the simple coating operation for thermal activation of peroxydisulfate (PDS) and production of clean water. Coating MXene on the surface of PU significantly improved the degradation of model pollutant carbamazepine (CBZ) compared with PU alone under simulated solar radiation. Because of the excellent photothermal conversion performance of Ti 3 C 2 MXene and the unique double-deck structure of MXene@PU module, the interfacial temperature of MXene@PU module reached about 140 °C, far higher than that of PU (about 82 °C). Radical identification experiments demonstrated that both hydroxyl radical and sulfate radical contributed to the degradation of organic pollutant. Addition of Cl − , HPO 4 2− , HCO 3 − and natural organic matter in solution generated inhibitory effect on CBZ degradation. The prepared MXene@PU module exhibited excellent stability after long-time experiment. Importantly, the interfacial evaporation process produced abundant recycled water and no pollutant was detected in recycled water. This study provides a feasible way to utilize the renewable solar energy for removal of organic pollutants and production of clean water.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2021
·
IF 9.078
Jingyi Lu,Pengfei Jia,Can Liao,Zhoumei Xu,Fukai Chu,Mutian Zhou,Bin Yu,Bibo Wang,Lei Song
The progress of super-robust, high ductile polymeric nanocomposite with superior safety have been caught increasing eyesight for the application in electronic products. In this article, strontium hydroxystannate (SSO) nanorods were in-situ fabricated on the surface of titanium carbide (Ti 3 C 2 T x ) MXene nanosheets (MSSO) for improving fire safety and mechanical property of thermoplastic polyurethane (TPU) to further applications of portable devices. With biomimetic method, the tensile robustness and toughness of TPU-2.0MSSO was enhanced by 46% and 126%, respectively. In addition, the TPU-MSSO nanocomposites performed leaf vein-inspired hierarchical structure during the stretching behavior, resulting 55% enhancement of elongation at break . Furthermore, the fire safety was systematically evaluated, and the peak heat release rate (pHRR) decreased by 37.31%. Above all, hazardous pyrolysis products of TPU during the combustion were also efficiently reduced, especially the generation of carbon oxide (CO) and carbon dioxide (CO 2 ) were decreased by 96.04% and 89.85% when the additive of MSSO was only 2 wt%. As a result, ternary catalytic effect and labyrinth structure improved the safety of TPU in modern electronic products. Hence, this leaf vein-inspired TPU-MSSO nanocomposites not only exhibit superior toughness but also reinforce fire safety while facing thermal runaway, which was significant to destroy the formation of thermal disaster chain and maintain further applications of additional products for portable devices, and package materials for flexible electronics.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Xifeng Wang,Zhiwei Lei,Xianda Ma,Guifang He,Tong Xu,Jing Tan,Lili Wang,Xiansheng Zhang,Lijun Qu,Xueji Zhang
Multifunctional wearable heater has attracted great interest in personal thermal management, but its potential safety hazards triggered by overheat remain. Herein, in order to minimize the risk of high-temperature induced ignition, a flame retardant Aramid nonwoven fabric was attempted to combine with the highly conductive MXene, where an intimate interface was constructed through their inherent abundant functional groups and the assisted plasma treatment. Interestingly, a very lightweight wearable heater with electromagnetic interference shielding (EMI efficiency of 35.7 dB for single-layer fabric), electrothermal conversion (up to 263 °C in 76 s at a supply voltage of 5 V) and photothermal conversion (up to 107 °C after irradiation for 175 s at light intensity of 125 mW cm −2 ) properties was achieved. These integrated properties arose from the interlacing conductive network cooperated by nonwoven fabric and stacked MXene nanosheets, which facilitated the multiple reflection and absorption of electromagnetic waves or light, as well as the low thermal conductivity. More importantly, the newly formed physical barrier from carbonization of the MXene further enhanced the flame retardancy of nanocomposite fabrics, guaranteeing the security in use. This research provides a versatile yet efficient path to fabricate the new generation of safe wearable MXene-based heater, which will expand their working temperature range.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2021
·
IF 15.881
Hongchen Wang,Ruicong Zhou,Donghai Li,Linrong Zhang,Guozhang Ren,Li Wang,Jinhua Liu,Deyang Wang,Zhenhua Tang,Gang Lu,Gengzhi Sun,Hai-Dong Yu,Wei Huang
The flexible strain sensor is of significant importance in wearable electronics, since it can help monitor the physical signals from the human body. Among various strain sensors, the foam-shaped ones have received widespread attention owing to their light weight and gas permeability. However, the working range of these sensors is still not large enough, and the sensitivity needs to be further improved. In this work, we develop a high-performance foam-shaped strain sensor composed of Ti3C2Tx MXene, multiwalled carbon nanotubes (MWCNTs), and thermoplastic polyurethane (TPU). MXene sheets are adsorbed on the surface of a composite foam of MWCNTs and TPU (referred to as TPU/MWCNTs foam), which is prefabricated by using a salt-templating method. The obtained TPU/MWCNTs@MXene foam works effectively as a lightweight, easily processable, and sensitive strain sensor. The TPU/MWCNTs@MXene device can deliver a wide working strain range of ∼100% and an outstanding sensitivity as high as 363 simultaneously, superior to the state-of-the-art foam-shaped strain sensors. Moreover, the composite foam shows an excellent gas permeability and suitable elastic modulus close to those of skin, indicating its being highly comfortable as a wearable sensor. Owing to these advantages, the sensor works effectively in detecting both subtle and large human movements, such as joint motion, finger motion, and vocal cord vibration. In addition, the sensor can be used for gesture recognition, demonstrating its perspective in human—machine interaction. Because of the high sensitivity, wide working range, gas permeability, and suitable modulus, our foam-shaped composite strain sensor may have great potential in the field of flexible and wearable electronics in the near future.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RENEWABLE ENERGY
·
2021
·
IF 8.001
Yu Du,Haowei Huang,Xinpeng Hu,Shuang Liu,Xinxin Sheng,Xiaolong Li,Xiang Lu,Jinping Qu
Phase change materials (PCMs) can effectively absorb and release energy from the environment during the phase transition process. However, liquid phase leakage and poor energy storage occur easily at the same stage. Considering the good adhesion of polydopamine (PDA) and the high solar absorption properties of PDA and MXene , a new supporting material was prepared in this work by combining melamine foam (MF) and MXene under the action of PDA, which was used to encapsulate polyethylene glycol (PEG) to prepare a composite PCM (CPCM). Then, we experimentally studied the thermal properties of this new material. The results show that the proposed PEG/MPMF CPCM (PEG@MPMF) exhibits good heat storage properties, and the melting enthalpy reaches 186.2 J/g, which is 99.5% of that of pure PEG. The light absorption of PEG@MPMF is improved by the conjugate action of PDA and MXene. Additionally, this CPCM maintains excellent shape stability and reusability after 100 thermal cycles. Therefore, the PEG@MPMF shows great advantages in terms of heat storage and thermal management.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2021
·
IF 5.268
Wen Luo,Huaxiao Liu,Xuan Liu,Lixiao Liu,Wenbo Zhao
MXene quantum dots have attracted much attention due to their great optical performance and excellent water solubility. Glutathione (GSH) plays a key role in living cells. In this study, a biocompatibility nanoprobe was prepared for detecting intracellular GSH based on MXene N-Ti 3 C 2 quantum dots (N-Ti 3 C 2 QDs). The N-Ti 3 C 2 QDs act as the fluorescence reporters and the ferric iron (Fe 3+ ) as the quenchers based on nonradiative electron-hole annihilation. When Fe 3+ encounters the amino group of N-Ti 3 C 2 QDs, the electrons of N-Ti 3 C 2 QDs in the excited state will transfer to the half-filled 3d orbitals of Fe 3+ , leading to the fluorescence quenching of N-Ti 3 C 2 QDs. When the N-Ti 3 C 2 QDs/Fe 3+ nanoprobe acts on the cancer cell MCF-7, the abundant GSH in the cancer cells can reduce Fe 3+ to Fe 2+ , which will restore the fluorescence of N-Ti 3 C 2 QDs. The N-Ti 3 C 2 QDs/Fe 3+ nanoprobe displays a high sensitivity for GSH with a detection limit of 0.17 μM in range of 0.5−100 μM. It becomes a promising probe for detecting and showing cellular imaging of GSH in MCF-7 cells. The N-Ti 3 C 2 QDs/Fe 3+ nanoprobe might provide a new way for imaging-guided precision cancer diagnosis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2021
·
IF 4.527
Keding Li,Yuqing Lei,Jun Liao,Siqi Huang,Yong Zhang,Wenkun Zhu
A series of MXene/MnCo 2 O 4.5 nanocomposites was successfully prepared by hydrothermal, ice crystal template and physical blend methods, respectively. Various characterizations indicated that hydrothermal method could successfully loaded MnCo 2 O 4.5 nanoparticles on the surface of MXene nanosheets to obtain MMC-W nanocomposites with 3D flower-like structure, which could give MMC-W large specific surface area. The HTD temperature and decomposition heat of AP with adding 2.0 wt% MMC-W could significantly decrease to 304.7 °C and increase to 1310.9 J g -1 , respectively. The lowest decomposition temperature (286.1 °C) and the highest heat release (1427.6 J g -1 ) of AP could be obtained by adding 8.0 wt% and 4.0 wt% of MMC-W, respectively. Moreover, MMC-W (2.0 wt%) could also significantly reduce the E a of pure AP by 118.3 kJ mol -1 and increase the k value for AP by 11.2 times. The excellent catalytic performance of MMC-W was owing to the synergistic effect of nano-sized MnCo 2 O 4.5 and MXene nanosheets. Owing to its high catalytic activity, MMC-W would be used as an excellent catalyst for ameliorating AP decomposition and supply an idea for the preparation of novel metal oxide nanoparticles.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2021
·
IF 15.881
Zehang Zhou,Quancheng Song,Bingxue Huang,Shiyi Feng,Canhui Lu
The development of modern electronics has raised great demand for multifunctional materials to protect electronic instruments against electromagnetic interference (EMI) radiation and ice accretion in cold weather. However, it is still a great challenge to prepare high-performance multifunctional films with excellent flexibilty, mechanical strength, and durability. Here, we propose a layer-by-layer assembly of cellulose nanofiber (CNF)/Ti3C2Tx nanocomposites (TM) on a bacterial cellulose (BC) substrate via repeated spray coating. CNFs are hybridized with Ti3C2Tx nanoflakes to improve the mechanical properties of the functional coating layer and its adhesion with the BC substrate. The densely packed hierarchical structure and strong interfacial interactions endows the TM/BC films with good flexibility, ultrahigh mechanical strength (>250 MPa), and desirable toughness (>20 MJ cm–3). Furthermore, benefiting from the densely packed hierarchical structure, the resultant TM/BC films present outstanding EMI shielding effictiveness of 60 dB and efficient electro-/photothermal heating performance. Silicone encapsulation further imparts high hydrophobicity and exceptional durability against solutions and deformations to the multifunctional films. Impressively, the silicone-coated TM/BC film (Si-TM/BC) exhibits desirable low voltage-driven Joule heating and excellent photoresponsive heating performance, which demonstrates great feasibility for efficient thermal deicing under actual conditions. Therefore, we believe that the Si-TM/BC film with excellent mechanical properties and durability holds great promise for the practical applications of EMI shielding and ice accretion elimination.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TALANTA
·
2021
·
IF 6.057
Qiannan You,Jiahui Peng,Zhimin Chang,Mingfeng Ge,Qian Mei,Wen-Fei Dong
2D materials with attractive optical properties are promising for individualized cancer immunotherapy. Isolation, capture, and release of circulating tumor cells (CTCs) are of great significance for promoting the process of early diagnosis of cancers. MXene nanosheets incorporated gelatin hydrogel offers the possibility of achieving near-infrared (NIR) light response to initiate the photothermal effect. Herein, the design and preparation of Ti 3 C 2 T x MXene nanosheets-embedded thermoresponsive gelatin hydrogel membrane with NIR light-responsive for the specific capture and release of CTCs were reported. The membrane was fabricated by casting Ti 3 C 2 T x -embedded gelatin onto a substrate and then modified with epithelial-cell adhesion-molecule antibody (anti-EpCAM) for the specific recognition and separation of CTCs from whole blood. The captured cells can be released without damage with dual-mode containing temperature-responsive release (gelatin deconstructed at 37 °C) and photothermal site-release (Ti 3 C 2 T x induced by NIR light). Furthermore, we were able to achieve an average efficient release rate of 89 % of captured cells with stable cell viability of 87 % via the NIR light irradiation . This work may provide the promising potential for retrieval of single cells in clinical diagnosis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF SEPARATION SCIENCE
·
2021
·Vol. 44
·期 18
·3398-3406
·
IF 3.645
Tiantian Pang,Xiaohui Chen,Kai Hu,Yongxia Cui,Wenjie Zhao,Huahui Zeng,Zhenqiang Zhang,Shusheng Zhang
In this study, a new Ti 3 C 2 T x -coated fiber was synthesized and utilized as coatings for solid-phase microextraction of seven polychlorinated biphenyls. The as-produced multilayered Ti 3 C 2 T x MXene was characterized by X-ray diffractometer, thermos-gravimetric analysis, scanning electron microscopy, and energy dispersive spectroscopy. It is noteworthy that the Ti 3 C 2 T x showed some attractive features including unique 2D layered structures, large surface area, good hydrophilicity, and rich active recognition sites, endowing it has a high affinity towards the target polychlorinated biphenyls. Subsequently, the affecting parameters on the extraction efficiency of polychlorinated biphenyls were optimized. Under the optimal conditions, a novel method for the analysis of polychlorinated biphenyls in water samples was proposed. The Ti 3 C 2 T x -coated fiber-based solid-phase microextraction method showed good linearity ( r 2 > 0.9928), high enrichment factors (268–442), low limits of detection (0.06–0.15 ng/L), and satisfactory repeatability (RSDs < 7.5%) for the polychlorinated biphenyls. The excellent method recoveries were in the range of 90.0–98.4, 92.0–98.2, and 92.0–98.0% for river water, lake water, and tap water samples, respectively. These results suggested that the proposed Ti 3 C 2 T x -coated fiber-based method represents a promising alternative for the analysis of polychlorinated biphenyls.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Physical Chemistry C
·
2021
·
IF 4.126
Huanhuan Zheng,Yijin Wang,Bingqiang Niu,Rui Ge,Yimin Lei,Lihe Yan,Jinhai Si,Peng Zhong,Xiaohua Ma
The defect control of polycrystalline perovskite films is essential for achieving an efficient and stable perovskite solar cell (PSC). However, existing methods of reducing defects suffer from their complex processes, low durability, and limited effects by using molecular materials in terms of passivation mechanisms. Herein, a hybrid film composed of SnO2 nanoparticles/Ti3C2Tx MXene nanoflakes is used as the electron transport layer (ETL) in a planar regular-structure PSC. The results indicate that by changing the Ti3C2Tx/SnO2 ratios (0–2.2 wt %) in ETLs, the film qualities of top perovskite layers are controllable, including the compactness, crystal size, surface roughness, crystallinity, optical absorption, defect density, and so forth. The defect density in perovskite films is substantially reduced from 5.65 × 1015 to 2.25 × 1015 cm–3 using an optimized hybrid ETL (1.4 wt %) compared with the pristine SnO2, while the electrical conductivity of the hybrid ETL is decreased probably due to the geometric factor of the incorporated MXene. As a result, the power conversion efficiency of PSCs is significantly increased from 16.28 to 20.35%, and the environmental stability of the unencapsulated devices is greatly improved. This work provides a facile, robust, and effective way to reduce defects in perovskite films by using emerging MXene nanomaterials and might also be useful to other perovskite-based (opto)electronic devices such as light-emitting diodes and photodetectors.
✓ 已验证
产品关联
DOI
高影响因子