文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3037至3048个,产品总数8,416个

切换升序
N'
ADVANCED FUNCTIONAL MATERIALS · 2025 · IF 19

High-performance p-n Thermocells by Interface Optimization Based on Liquid Metal for Powering Wearable Devices

Yuqing Tian,Wei Wei,Zhouquan Sun,Yunhao Hu,Kerui Li,Qinghong Zhang,Yaogang Li,Chengyi Hou,Hongzhi Wang

Using body heat as a sustainable energy source through the thermoelectric effect to power wearable electronics is promising. Ionic thermoelectric materials based on the thermogalvanic effect can generate stable voltage under low-temperature differences, but their low thermopower and poor contact interface with electrodes hinder practical use. In this study, strong chaotropic salts are utilized to modify the solvation shells of ions, increasing the thermopower of the p-type redox couple [Fe(CN)₆] 3 ⁻/[Fe(CN)₆]⁴⁻ to 3.98 mV K −1 . Additionally, Arrhenius acid is introduced to inhibit the deprotonation of the n-type redox couple Fe 3 ⁺/Fe 2 ⁺, enhancing the thermopower to −2.29 mV K −1 . Liquid metal electrodes, with excellent deformability and hydrogen bonding with hydrogel surfaces, effectively reduce the resistance of thermocells. Thus, a pair of p-n thermocells achieve a voltage output of 118 mV and a current density of 4.5 A m − 2 , with a maximum power density of 0.11 W m − 2 (Δ T = 5 K). A wearable device integrated with 18 p-n pairs can generate a voltage of 2.2 V from body heat and continuously power portable electronic devices. This work demonstrates the promising potential of wearable self-powered devices for practical daily applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials Today Chemistry · 2025 · IF 6.7

High-performance room temperature N2H4 sensor based on tree pathogen derived self-doped N porous carbon

Weijin Wang,Weiyu Zhang,Qihua Sun,Ning Tian,Jun Sun,Zhaofeng Wu

The development of a green and non-polluting gas-sensitive material for N 2 H 4 detection at room temperature (RT) remains a challenge. Guided by the concept of green and sustainable development, we have prepared a novel porous carbon material (LSC) for high-performance N 2 H 4 detection at RT. This was achieved through a green and environmentally friendly one-step carbonization method, using Laetiporus sulphureus (LS), a tree pathogen abundant in amino acids and proteins, as a precursor for nitrogen self-doping. Through optimization of the carbonization temperature, the LSC-600 sensor achieves highly sensitive and selective detection of N 2 H 4 at RT, with a response of 32.11k%–500 ppm N 2 H 4 and exhibits a faster response (∼20.1 s) and recovery (∼1.5 s). The LSC-600 sensor shows good long-term stability, with a response to N 2 H 4 varying less than 8.4 % after 30 days. Moreover, its gas-sensitive mechanism is discussed in detail. This research not only presents a green and sustainable approach for the valuable utilization of biomass waste but also furnishes a valuable reference for the development of high-performance sensors. In addition, it expands the scope of bio-manufacturing and opens up new avenues for research and development in materials science.

CAS / MDL: 7722-84-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Communications Biology · 2025 ·Vol. 8 ·期 1 ·1-10 · IF 5.1

High hydrostatic pressure stimulates n-C16 mineralization to CO2 by deep-ocean bacterium Alcanivorax xenomutans A28

Lin Huaying,Lv Yongxin,Zhang Yu

Medium-chain alkanes have strong ecological impacts on marine ecosystems due to their persistence, toxicity, and ability to travel long distances. Microbial degradation is the dominant and ultimate removal process for n-alkanes in the deep ocean, where high hydrostatic pressure (HHP) regulates microbial activity. To gain insight into the impact of hydrostatic pressure (HP) on n-alkane degradation, we applied the deep-ocean experimental simulation to culture Alcanivorax xenomutans A28, a novel piezotolerant bacterium strain from trench sediment, with n-C 16 as the sole carbon source under different HPs (0.1, 40, and 80 MPa). Activity analysis demonstrated that HHP stimulated the n-C 16 complete mineralization ratio. Transcriptomic and metabolomic analyses showed that HHP induced the intracellular oxidative stress and accelerated the tricarboxylic acid (TCA) cycle. These results indicate a shift of n-alkanes biodegradation pattern regulated by HP, elucidating the fate and ecological risk of n-alkanes in the deep ocean.

CAS / MDL: 544-76-3
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2024 · IF 8.1

Fe-N-coordinated graphene-like honeycomb porous carbon as an extremely effective catalyst for catalytic oxidation

Meiling Wu,Yang Tao,Yuwei Liu,Sanying Hou,Tiyang Xiao,Qing Fu,Guowen Peng,Lang Shi

In this study, Fe/N co-doped graphene-like honeycomb porous carbon (Fe-NC)was produced and used for the activating PMS to degrade TC. The Fe-NC catalyst has shown high activity in the TC degradation by activated PMS, with an efficiency of up to 94 % in 30 min. while the blank catalyst without N and Fe doping exhibited the lowest performance with 47.3 % TC degradation. Moreover, other operational factors of Fe-NC catalysts were also investigated to evaluate its catalytic activity. The burst experiments and electron paramagnetic resonance (EPR) experiments demonstrated that free radical paths (O 2 ·- ) and non-free radical paths ( 1 O 2 ) coexist inside the Fe-NC/PMS system. The experiment results and degradation mechanism analysis revealed that N species(Pyridine N, Graphite N,Fe-N x ) and iron species (Fe0) were possible to be the active species of catalysts. Furthermore, Fe-NC/PMS system was investigated for possible pathway of TC degradation by liquid mass spectrometry (LC-MS), and the presence of intermediates was analyzed for toxicity magnitude by ECOSAR software.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CARBON · 2024 · IF 10.5

Fabrication of N/P-codoped carbon dots with anti-bacterial activity for enhanced aqueous lubrication performance

Guangkai Jin,Yuhong Cui,Kaige Yan,Shenghua Xue,Shujuan Liu,Qian Ye,Feng Zhou,Weimin Liu

To address energy wastage caused by friction, it is urgently needed to develop multi-functionalized nano-additives based on traditional lubricant additives. Herein, nitrogen/phosphorus co-doped carbon dots (N,P-CDs) are successfully prepared via one step hydrothermal method using benzopyrrole as raw materials and diethylenetriaminepenta as N, P-dopant. The prepared N,P-CDs demonstrate good lubrication effects when used as water-based additives. Compared with pure H 2 O, the coefficient of friction (COF) significantly decreases from 0.448 to 0.144, accompanied by a notable reduction in wear volume from 3.84 × 10 5  μm 3 to 2.31 × 10 5  μm 3 . This is attributed to the formulation of the robust hydration layer on the CDs surface, as well as the tribochemical protective film generated on the friction pair surface. In addition, the introduction of N,P-CDs effectively inhibits bacterial growth during long-term storage of H 2 O as lubricant. With small additions (100 μg/mL), the anti-bacterial rates against Escherichia coli and Staphylococcus aureus could reach 94.9 % and 99.5 %, respectively.

CAS / MDL: 7783-28-0 2378619-75-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Korean Journal of Materials Research · 2024 ·Vol. 34 ·期 9 ·409-421 · IF 0.3

Facile Synthesis of WCu-C/N for Effective Catalyst toward Electrochemical Reduction of CO2 to CO

Kai Chen,Zeda Meng,Yao Liu,Yilei Sun,Yuan Liang,Won-Chun Oh

Among the products of the electrocatalytic reduction of carbon dioxide (CO2RR), CO is currently the most valuable product for industrial applications. However, poor stability is a significant obstacle to CO2RR. Therefore, we synthesized a series of bimetallic organic framework materials containing different ratios of tungsten to copper using a hydrothermal method and used them as precursors. The precursors were then subjected to pyrolysis at 800 ℃ under argon gas, and the M-N bimetallic sites were formed after 2 h. Loose porous structures favorable for electrocatalytic reactions were finally obtained. The material could operate at lower reduction potentials than existing catalysts and obtained higher Faraday efficiencies than comparable catalysts. Of these, the current density of WCu-C/N (W:Cu = 3:1) could be stabilized at 7.9 mA·cm-2 and the FE of CO reached 94 % at a hydrogen electrode potential of -0.6 V (V vs. RHE). The novel materials made with a two-step process helped to improve the stability and selectivity of the electrocatalytic reduction of CO2 to CO, which will help to promote the commercial application of this technology.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2024 · IF 6.3

Iron phosphides nanoparticles strongly coupled to N-doped carbon for high-efficiency oxygen reduction and evolution

Qingsong Luo,Pengfei Zheng,Lina Han,Yidan Fu,Xiaoyuan Zeng,Jing Feng,Yudong Sui,Peng Dong,Yingjie Zhang

Constructing composite structures is an effective strategy for tailoring the electronic configuration and balances the adsorption/desorption capability of oxygen-containing intermediates for obtaining high-performance bifunctional catalysts. Herein, an in-situ pyrolysis strategy was used to construct Fe 2 P nanoparticles supported on N-doped carbon (Fe 2 P/NC) catalyst. The DFT indicated that the catalytic activity of the as-prepared catalyst is significantly increased by the strong electronic interaction between the Fe 2 P nanoparticles and the nitrogen-doped carbon, which endows the catalyst with fast electron transfer capability and optimizes the free energy between the catalyst and the adsorbed intermediate, as well as the d-band center of the material. The as-synthesized Fe 2 P/NC has a low potential gap ΔE (ΔE = E j=10 – E 1/2 ) of ca. 0.75 V, a specific capacity as high as 833 mAh·g Zn − 1 and cycling stability for 1320 cycles at the current density of 10 mA·cm −2 . Such a synthesis strategy provides an effective route to realizing applications for portable electronic Zn-air battery-related devices.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2025 · IF 5.1

Isolated iron atoms anchored on MOF-derived hollow N-doped carbon for the detection of dopamine

Xinyi Wang,Jing Wang,Jian Yang,Houcheng Ding,Yongping Dong

Sensitive and selective determination of neurotransmitter dopamine (DA) holds great significance in clinical disease diagnosis. Constructing highly active electrocatalysts at low costs is a favorable strategy for sensitive electrochemical detection of DA. In this work, taking a template-aided method, single-atom iron supported on hollow N-doped carbon matrix (Fe SA/HNC) was successfully synthesized. After the morphology and component of the prepared catalysts were characterized in details, it was used to construct electrochemical sensor. Given the excellent catalytic activity of Fe SA and the porous spherical structure of HNC, under the optimal conditions, the Fe SA/HNC sensor exhibited superior sensing performance to DA in a wide concentration range from 1.0 to 1000 µM with a low detection limit of 0.32 µM, along with good stability, reproducibility, and repeatability. In addition, the Fe SA/HNC sensor was also adopted to the simultaneous detection of three common small biomolecules including DA, uric acid (UA) and ascorbic acid (AA). Lastly, the applicability of the sensor was also well-demonstrated by detecting DA in real samples of human serum, showing satisfactory recoveries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2024 · IF 9.4

Identification of true active sites in N-doped carbon-supported Fe2P nanoparticles toward oxygen reduction reaction

Hongwei Wang,Tsung-Cheng Yang,Hao Zheng,Zeyi Jiang,Chia-Min Yang,Nien-Chu Lai

Transition metal-based nanoparticles (NPs) are emerging as potential alternatives to platinum for catalyzing the oxygen reduction reaction (ORR) in zinc-air batteries (ZAB). However, the simultaneous coexistence of single-atom moieties in the preparation of NPs is inevitable, and the structural complexity of catalysts poses a great challenge to identifying the true active site. Herein, by employing in situ and ex situ XAS analysis, we demonstrate the coexistence of single-atom moieties and iron phosphide NPs in the N, P co-doped porous carbon (in short, Fe-N 4 -Fe 2 P NPs/NPC), and identify that ORR predominantly proceeds via the atomic-dispersed Fe-N 4 sites, while the presence of Fe 2 P NPs exerts an inhibitory effect by decreasing the site utilization and impeding mass transfer of reactants. The single-atom catalyst Fe-N 4 /NPC displays a half-wave potential of 0.873 V, surpassing both Fe-N 4 -Fe 2 P NPs/NPC (0.858 V) and commercial Pt/C (0.842 V) in alkaline condition. In addition, the ZAB based on Fe-N 4 /NPC achieves a peak power density of 140.3 mW cm −2 , outperforming that of Pt/C-based ZAB (91.8 mW cm −2 ) and exhibits excellent long-term stability. This study provides insight into the identification of true active sites of supported ORR catalysts and offers an approach for developing highly efficient, nonprecious metal-based catalysts for high-energy–density metal-air batteries.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CATALYSIS LETTERS · 2024 · IF 2.3

Improved Electron Distribution in Graphene Quantum Dots Carrier by F, N Co-Doping for Electrocatalytic ORR

Sun Min,Chu Siyu,Guo Dongfang,Jiao Xinyu,Wang Haiyan,Wang Lingli,Li Zijiong,Jiang Liying

Rising energy demand has forced to look for new ways to convert energy. Graphene quantum dots (GQD) has received extensive attention in many fields due to their low toxicity, abundant active sites, sound water solubility and photoluminescence stability. Here, a fluorine-nitrogen co-doped GQD (C-GQD) is synthesized for efficient oxygen reduction reaction (ORR) catalysts. The incorporation of fluorine and nitrogen atoms changed the electronic structure of the carbon atom, resulting into synergistic enhancement of catalytic performance toward ORR. Electrochemical studies of the ORR showed that the initial potentials of C-GQD were positively shifted by 200 mV and 170 mV compared with those of GQD and N-GQD, respectively, and the half-wave potentials were positively shifted by 200 mV and 180 mV, which were comparable to that of 20% Pt/C. The CV curves underwent only slight fluctuations after 10,000 cycle tests. The obtained results provide important insights into the use of metal-free catalysts with GQDs as carriers as promising electrocatalysts for proton exchange membrane fuel cells with low cost and easy preparation procedures. Graphical Abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Separations · 2025 ·Vol. 12 ·期 2 ·42 · IF 2.7

In Situ N-Doped Low-Corrosion Porous Carbon Derived from Biomass for Efficient CH4/N2 Separation

Huihui Wang,Yuqiong Zhao,He Lian,Qi Wang,Zhihong Shang,Guojie Zhang

The separation of CH4and N2is essential for the effective use of low-concentration coalbed methane (CBM). In this study, a series of nitrogen-doped porous carbons were synthesized using an in situ nitrogen doping method combined with K2CO3activation. The study systematically examined how changes in the physical structure and surface properties of the porous carbons affected their CH4/N2separation performance. The results revealed that in situ nitrogen doping not only effectively adjusts the pore structure and alters the reaction of K2CO3on the carbon matrix, but also introduces nitrogen and oxygen functional groups that significantly enhance the adsorption capabilities of the materials. In particular, sample S3Y6−800 demonstrated the highest methane adsorption capacity of 2.23 mmol/g at 273 K and 1 bar, outperforming most other porous carbons. This exceptional performance is attributed to the introduction of N-5, N-6, C-O, and COOH functional groups, as well as a narrower pore-size distribution (0.5–0.7 nm) and the formation of carbon nanotube structures. The introduction of heteroatoms also provides additional adsorption sites for the porous carbon, thus improving its methane adsorption capacity. Furthermore, dynamic breakthrough experiments confirmed that all samples effectively separated methane and nitrogen. The Toth model accurately described the CH4adsorption behavior on S3Y6−800 at 298 K, suggesting that the adsorption process follows a sub-monolayer coverage mechanism within the microporous regions. This study provides a mild and environmentally friendly preparation method of porous carbons for CH4/N2separation.

CAS / MDL: 584-08-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2024 · IF 4.9

Core-shell structure N-doped graphene quantum dots Fe3O4/Co3O4 nanoparticles for colorimetric detection of H2O2

Yujin Li,Mingzhu Qiu,Peiqing Guo,Xuefang Lei,Shaohui Li,Ran Meng,Nali Chen,Dongxia Zhang,Xibin Zhou

Hydrogen peroxide (H 2 O 2 ) is an environmentally friendly intermediate in the environmental field and also plays an important role in human metabolism, but the production and accumulation of excessive H 2 O 2 will cause harm to the human body, resulting in serious damage to cells. Therefore, N-doped graphene quantum dots Fe 3 O 4 /Co 3 O 4 nanoparticles with core-shell structure were prepared by in-situ synthesis and precipitation. The experimental results show that the prepared Co 3 O 4 nanoparticles have more efficient peroxidase activity than Co 3 O 4 nanoparticles alone. It can catalyze the oxidation of 3, 3, 5, 5-tetramethylbenzidine (TMB) to produce a blue product (TMBox) in the presence of H 2 O 2 . In addition, Co 3 O 4 with negative charge in the shell can produce a strong electrostatic driving coordination effect with positively charged TMB, which enhances the affinity between the nanoparticles and the substrate, and selectively catalyzes H 2 O 2 oxidation of colorless TMB to turn it blue. Based on these experimental results, a simple, low-cost, and efficient colorimetric method for H 2 O 2 detection was established, which showed a sensitive response to H 2 O 2 in the range of 0.02–2.5 μM with a detection limit of 2.3 nM. In addition, due to the magnetic properties of the prepared nanoparticles, they could be easily recovered by applying a magnetic field. This research provides a viable approach for magnetic nanomaterials with encouraging prospects for environmental monitoring, biosensing, and more.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。