Nature Communications
·
2026
·
IF 18.1
Zhao Jingwen,Yang Wujie,Fan Yanpeng,Chang Zhi,Zhou Haoshen
Hard carbon negative electrodes, owing to their abundant precursors and low operating potential, are promising candidates for sodium-ion batteries. However, sluggish desolvation kinetics and unstable electrode–electrolyte interfaces hinder their practical deployment. Here we report a melt-coating strategy to encapsulate hard carbon particles with a metal–organic framework glass. The resulting glass coating contains sub-nanometer channels that lower the desolvation activation energy, accelerate sodium-ion transport, and induce a thin, anion-derived solid electrolyte interphase rich in NaF during cycling. The optimized interface promotes the formation of quasi-metallic sodium clusters within the closed pores of hard carbon, activating a high-capacity sodium storage mechanism. Consequently, the glass-coated hard carbon delivers a reversible capacity of 462.2 mAh g −1 , cycling stability of 89.1% capacity retention after 4000 cycles at 1 A g −1 and 95.3% capacity retention after 8000 cycles at 2 A g −1 , and high-rate capability. This work offers insights into interfacial design strategies for durable sodium-ion storage in hard carbon negative electrodes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Sustainability
·
2026
·
IF 32.1
Zhao Chang-Xin,Li Zheng,Zhang Daoning,Zhang Nan,Zhang Qiu,Wang Zeyi,Li Yue,Chen Yawei,Wang Chunsheng
Fast charging and low-temperature operation are essential for next-generation energy storage. However, high-energy batteries struggle to meet these demands as existing electrolytes cannot simultaneously deliver fast interfacial kinetics, high ionic conductivity and favourable interphase formation. Prevailing strategies focus on weakening thermodynamic solvation, yet this approach does not directly address the kinetic bottleneck, that is, the desolvation barrier governing interfacial charge transfer. Here we reveal that the desolvation kinetics are dictated by dynamic solvent exchange rather than thermodynamic solvation energy. Guided by this mechanistic insight, we have formulated an electrolyte in which two anions carry distinct anionic potentials: high-anionic-potential anions form contact ion pairs that accelerate solvation-exchange kinetics, while low-anionic-potential anions form solvent-separated ion pairs that sustain high bulk ionic conductivity. The electrolyte enables fast charging and low-temperature operation in high-loading lithium-ion batteries. The design principle was further validated in aqueous aluminium-ion electrochemical systems, underscoring its broader relevance to sustainable, resource-abundant battery chemistries beyond the lithium ion. Together, our findings establish a new electrolyte design paradigm that decouples interfacial and bulk transport properties and expands the design space of battery electrolyte systems.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
·
2026
·
IF 2.6
Gao Xue,Zhao Feng,Du Zhonghua,Xu Qican
Ceramic/metal composite armor faces limitations in lightweighting, environmental adaptability, and multi-impact resistance. This study proposes a bio-inspired gradient-structured modified polyurethane (PU)/ceramic composite armor. The PU matrix, modified via dynamic covalent disulfide (S-S) bonds, exhibits excellent self-healing (> 95% recovery) and toughness (> 300% elongation). A double-sided PU/ceramic sandwich structure was developed to leverage synergistic energy dissipation through ceramic fragmentation and polymeric tensile delay. Ballistic impact tests and explicit dynamic simulations (deviation < 2%) were performed. Results show the double-sided design achieved a specific energy absorption (SEA) of 20.02 J·m 2 /kg and a ballistic limit (V 50 ) of 493.10 m/s at an areal density of 45.35 kg/m 2 , yielding an 11-18% improvement over conventional systems. Furthermore, the composite maintained structural integrity after 3000-h salt spray and − 50 °C impact evaluations. Energy dissipation analysis quantified that the ceramic layer accounts for 70% of energy absorption via fragmentation, while the PU layer contributes 30% through fibrillation-induced stretching. This research provides a material–structure integration strategy for next-generation intelligent, lightweight, and durable protective systems.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 4.6
Chen Qiang,Cheng Yi-Yan,Sun Yu-Pei,Chen Sen-Bin,Zhang Lian-Bin,Zhu Jin-Tao
Polymer microneedles (MNs) have emerged as promising next-generation transdermal drug delivery platforms owing to their noninvasive nature and high delivery efficiency. Conventional fabrication strategies for polymer MNs mainly rely on mold-assisted vacuum casting or hot pressing. However, these approaches often fail to simultaneously achieve rapid fabrication and mild processing conditions, which are particularly critical for the fabrication of temperature-sensitive drug-loaded MNs. Herein, we report a vacuum-assisted pressing strategy for MN fabrication based on O -carboxymethyl chitosan (CMCA) and natural polyphenol protocatechuic acid (PCA) supramolecular composite slurries. This method enables MN production under significantly reduced processing times (<12 h) and mild thermal conditions (50 °C). Viscoelastic supramolecular composite slurries can be obtained by precisely tuning the polymer-to-polyphenol ratio, which is highly compatible with vacuum-assisted pressing in MNs molding. The resulting polymer-polyphenol supramolecular composites exhibit robust mechanical properties, with a fracture stress of 0.5 MPa and a toughness of 1.31 MJ·m −3 . Notably, supramolecular MNs demonstrated a high fracture force of up to 1.08 N per needle, indicating sufficient mechanical integrity for transdermal insertion. This fabrication strategy offers a viable route for low-cost, scalable, and mild MN fabrication, highlighting its strong potential for practical and commercial applications.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2026
·Vol. 193
·期 7
·503
·
IF 5.4
Xiao Yue,Wen Xuefei,Zhang Xingzhong,Chen Hongrui,Tang Jie,Chi Hai,Li Liman,Thanapop Soteyome
To enable sensitive quantitative detection of zearalenone (ZEN) in cereal matrices, this study develops a molecularly imprinted electrochemical sensor. A three-dimensional flower-shaped carbon composite material (CoNiZn@C), synthesized from a ternary CoNiZn metal–organic framework, was utilized as a highly conductive substrate featuring excellent electrical conductivity and abundant binding sites. Density functional theory calculations were conducted to elucidate the intermolecular interactions and cooperative recognition mechanisms between zearalenone and the selected monomers. Experimentally, the AuNPs-based thioaniline units (PATP@AuNPs) and pyrrole were employed as bifunctional monomers. Specifically, PATP@AuNPs can be stably immobilized on the substrate surface to enhance interfacial electron transfer efficiency, while simultaneous in situ copolymerization of the two monomers generates numerous non-covalent binding cavities capable of specifically recognizing ZEN. Under optimized experimental conditions, the sensor exhibited a linear detection range from 10 nM to 1000 µM and a detection limit as low as 1.6 nM. This detection approach is straightforward, cost-effective, and demonstrates excellent specificity and sensitivity, indicating substantial potential for rapid screening and quantitative analysis of mycotoxins in agricultural products. Graphical
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2026
·Vol. 33
·期 7
·301
·
IF 3.5
Zhao Xin,Qiu Haofeng,Antonov Alexander,Zhang Haiyi,Zhang Mengbo,Wang Yitao,Duan Xueming,Liu Hongzhi,Han Lijing,Zhang Ruoyu
Nanofillers usually suppress the self-healing capability of the matrix, because they restrict polymer-chain mobility. This study aims to develop polyurethane nanocomposites with integrated self-healing and antimicrobial properties by simultaneously introducing non-covalent interactions. Initially, chemical modification was used to introduce quaternary ammonium and amphiphilic ionic groups onto cellulose nanofibers, producing amphiphilic nanocellulose (Am-CNF). Subsequently, Am-CNF was mixed with a self-healing ionic polyurethane (IPU) in different proportions using a solution-mixing method to create a series of self-healing antimicrobial APUs. The results indicate that the incorporation of Am-CNF didn’t deteriorate the self-healing behavior and endowed the composites with attractive antibacterial properties through electrostatic interactions with bacteria. At room temperature, the self-healing of the composites is even faster than that of pure IPU, as observed by optical microscopy and 3D confocal microscopy. The developed APUs demonstrated rapid self-healing capabilities and showed up to 99.9% antimicrobial efficacy against both Gram-positive and Gram-negative bacteria. Cellular and animal tests further validated the biosafety of these samples and indicated their potential as medical or packaging materials.
✓ 已验证
产品关联
DOI
高影响因子
Nature Nanotechnology
·
2026
·
IF 37.5
Zhang Haikuo,Chen Long,Hua Junyi,Li Ruhong,Zhu Haotian,Ma Baochen,Zhang Shuoqing,Zhou Runjie,Ma Yuntong,Hu Shoulei,Zhang Wujun,Zhou Tao,Lv Ling,Wu Linzhe,Yu Yuan,Chen Lixin,Li Yong,Guo Rui,Guo Feng,Le Chao,Shen Yanbin,Deng Tao,Fan Xiulin
Achieving high specific energy in lithium metal batteries requires rational electrolyte design to promote effective interphase formation. State-of-the-art electrolyte design strategies fall short because they lack fundamental guidelines that connect solvent characteristics with electrolyte properties. Here we explain the influence of the medium environment on solvation states and anion reduction, and propose a mediator-enhanced electrolyte design strategy by quantitatively exploring various solvent classes using designed polarity indices. The solvent mediator approach generates, at the nanoscale, intermolecular electrostatic fields through separated solvent surface charges, enhancing interactions to better accommodate solvated lithium ions and decreasing the reduction energy barrier for anions. These tailored mediator-enhanced electrolyte solutions (MEEs) exhibit stable solvation states and adequate interphase formation, enabling robust interfacial chemistries and preventing side reactions. Using the MEE design in a 6-Ah Li ‖ LiNi 0.8 Co 0.1 Mn 0.1 O 2 pouch cell results in an initial specific energy of 508 Wh kg −1 (based on the cell’s total mass) at 21 mA g −1 (based on the cell’s cathode mass), with 93% energy retention after 149 cycles at 42 mA g −1 . In a 16-Ah zero-lithium-excess Cu ‖ LiNi 0.90 Mn 0.05 Co 0.05 O 2 pouch cell, the MEE approach also enables an initial specific energy of about 550 Wh kg −1 (based on the cell’s total mass) at 23 mA g −1 .
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Yang Yuxuan,Krisiune Deimante,Xu Yuliang,Liu Xuehui,Zhao Qiangqiang,Xu Yongde,Tian Hao,Kasparavicius Ernestas,Gao Zhiyu,Fu Xu,Zhang Bao,Xia Jianxing,Xiao Chuanxiao,Pang Shuping,Getautis Vytautas,Zhao Dewei,Rakstys Kasparas,Zhang Yi
Self-assembled monolayers (SAMs) have become indispensable hole-selective contacts for high-efficiency inverted perovskite solar cells (PSCs). However, the intrinsically acidic head groups of conventional SAMs lead to interfacial inhomogeneity, limited charge transfer, and poor operational stability. Here, we introduce a family of alkali metal–based phosphonate salts (2PACz-M) through targeted head-group functionalization of the benchmark [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) SAM, achieving a chemically neutralized and electronically delocalized interface. The ionic phosphonate moiety enhances π-electron conjugation, improves energy-level alignment, and strengthens chemical coordination with metal oxide electrodes, resulting in homogeneous and stable surface coverage. Moreover, when combined with [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz), the mixed-SAM interface exhibits a synergistic effect that facilitates efficient hole extraction, suppresses non-radiative recombination, and reinforces environmental robustness. This interfacial engineering enables 1.55 eV PSCs to achieve a champion power conversion efficiency (PCE) of 26.88% with a fill factor (FF) of 86.57%, alongside a 23.32% PCE for a 29.7 cm 2 module. The SAM synergy proves universal across perovskites of varied bandgaps, yielding two-terminal (2T) all-perovskite tandem solar cells with an enhanced PCE of 29.05%.
✓ 已验证
DOI
PubMed
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2026
·
IF 4.1
Zhao Zhongfu,Zhao Dong,Wang Haoyu,Yu Xingbo,Wu Sitong,Ma Jianan,Guo Xing,Ji Jianlong,Zhou Chuangang,Sang Shengbo
The surface stress–based transduction enabled by antibody functionalization has emerged as a promising paradigm for label-free biosensor development. However, the inherent limitations of conventional detection methods (e.g., high cost, complex modification, insufficient sensitivity) and the challenge of achieving high-throughput analysis hinder their practical clinical application. Herein, a high-throughput label-free biosensor array based on multi-component integration of gold nanoparticles (AuNPs), polydimethylsiloxane (PDMS) membrane, and conductive silver paste is proposed for sensitive and specific detection of alpha-fetoprotein (AFP), a pivotal biomarker for hepatocellular carcinoma (HCC). The specific immunoreaction between immobilized anti-AFP antibodies and target AFP induces compressive surface stress, which triggers PDMS membrane deformation and regulates the electrical resistance of the AuNP conductive layer, realizing the stress-electric coupling transduction. Systematic optimization of antibody surface density (50 μg/mL) and AuNP layer thickness (0.67 μm) maximizes antigen capture efficiency and mechano-electrical transduction performance. The proof-of-concept application for AFP detection demonstrates remarkable analytical performance: a linear detection range of 0–50 ng/mL, a low limit of detection (LOD) of 0.225 ng/mL, high specificity against interfering biomolecules. Furthermore, accurate detection of AFP in clinical serum samples (relative error < 5.05%, RSD < 2.97%) confirms its practical applicability. All these results indicate that the integrated design and parameter optimization of the AuNP-PDMS-based biosensor array enhance the performance of surface stress biosensors, providing a cost-effective platform for the sensitive detection of clinical cancer biomarkers. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF NANOBIOTECHNOLOGY
·
2026
·
IF 15
Yu Xiaoyu,Lu Yan,Tan Zhiren,Gao Shulei,Ye Long,Luo Xiaoyan,Xie Jian,Miao Yuhao,Wang Bing,Liang Chenrui,Liu Ying,Wang Jilong,Ma Yinchu,Luo Yingli
Major depressive disorder (MDD) is a prevalent psychological disorder that has a substantial effect on social and psychological functioning, requiring innovative treatments. Circular RNAs (circRNAs) have been shown to play a role in the pathogenesis of MDD and represent promising therapeutic targets. However, the target delivery strategies of interfering circRNAs against depression have not been extensively researched. Here, CircMBNL1 was identified to be significantly upregulated in plasma samples and showed a positive correlation with 24-Hamilton Depression Scale (HAMD-24) scores in patients with MDD. Moreover, in the microglia of the brains of mice subjected to the chronic unpredictable stress (CUS) model, circMBNL1 was significantly upregulated. To achieve specific knockdown of circMBNL1 in microglia, PEG/PEI-based nanoparticles were modified with MG1 peptide for the targeted delivery of siRNA (TNP-si-circMBNL1) into activated microglia via intranasal administration. In vitro and in vivo studies demonstrated that TNP-si-circMBNL1 efficiently delivered si-circMBNL1 to activated microglia, resulting in a significant reduction in circMBNL1 expression. Notably, intranasal administration of TNP-si-circMBNL1 effectively ameliorated CUS-induced depressive-like behaviors in mice. These results indicate that circMBNL1 is linked to MDD, and the peptide-guided nanoparticle loaded siRNA targeting circMBNL1 (TNP-si-circMBNL1) displays great potential for depression therapy. Graphical
✓ 已验证
DOI
PubMed
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2026
·
IF 3.3
Ai Hengyu,Meng Fanqi,Wang Shanshan,Taran Oxana P.,Sun Fubao,Yan Hong
Mn 0.5 Cd 0.5 S (MCS) is widely used in photocatalytic hydrogen production via water splitting. However, its inherent drawbacks, including low separation efficiency of photogenerated electron–hole pairs, poor stability, and severe photocorrosion, limit hydrogen production efficiency. In this study, carbon quantum dots (CQDs) were synthesized using alkaline lignin as the carbon source and were loaded onto the surface of MCS via ultrasonic-assisted treatment to construct CQDs/MCS composite photocatalyst. Characterization results revealed that the introduction of CQDs did not alter the crystal structure of MCS but effectively broadened its light absorption range, leading to a red shift of the absorption edge and a narrowed band gap, as well as reduced charge transfer resistance and hydrogen evolution overpotential. The CQDs/MCS composite photocatalyst with the addition of 15 mL CQDs solution exhibited the optimal photocatalytic performance, with a hydrogen evolution rate of 13.11 mmol g −1 h −1 , which was 1.33 times higher than that of pure MCS. Moreover, the composite showed excellent recyclability. The enhanced hydrogen evolution performance of CQDs/MCS can be attributed to the fact that CQDs can capture photogenerated electrons and accelerate the separation of electron–hole pairs. In conjunction with the hole consumption by sacrificial agents, the CQDs/MCS composite achieved significantly enhanced photocatalytic hydrogen evolution performance.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 18
·1407
·
IF 3.2
Jiang Zheng,Yang Xiaoliang,Xiao Siguo
Cr 3+ /Bi 3+ co-doped and Cr 3+ /Yb 3+ co-doped La 2 LiSbO 6 phosphors have been synthesized via a high-temperature solid-state method, respectively. La 2 LiSbO 6 : Cr 3+ gives a broadband emission peaking at 855 nm under 671 nm excitation. Partial substitution of La 3 ⁺ ions by Bi 3+ ions induces lattice distortion in the La 2 LiSbO 6 host and weakens the crystal field strength of Cr 3+ , leading to the red shift of Cr 3+ emission. The Cr 3+ emission peak shifts from 855 to 900 nm with Bi 3+ concentration increasing from 0 to 0.07 mol %. The increased lattice distortion also improves the local environment of Cr 3+ , thereby resulting in a threefold increase in luminescence intensity and a 25.8% increase in quantum yield. When the Yb 3+ ions are introduced, the emission peak can be further tuned from 855 to 1000 nm directly, induced by energy transfer from Cr 3+ to Yb 3+ ions. It is proven that quadrupole–quadrupole interaction is responsible for the energy transfer from Cr 3+ to Yb 3+ in the La 2 LiSbO 6 host. Moreover, the introduced Yb 3+ also largely improves the thermal stability of the phosphor. The work might provide meaningful reference for the design and development of highly efficient Cr 3+ -doped luminescent materials.
✓ 已验证
DOI
高影响因子