RSC Advances
·
2018
·Vol. 8
·期 56
·32358-32367
·
IF 2.936
Yong Dong,Liqin Cao,Jing Li,Yongxia Yang,Jide Wang
A novel clean method to synthesis a composite monolith was developed. Given its amphiphilic property, UiO-66 can emulsify water and CO2 to format a high internal phase emulsion (HIPE) under certain conditions. These UiO-66-emulsified Pickering HIPEs can be used as templates to prepare interconnected macroporous MOF/polymer composite monoliths. The effects of UiO-66 amount, cross-linking agent concentration, and CO2–water ratio on UiO-66/PAM structures were investigated. Then, the as-synthesized MOF/PAM composites were characterized by TGA, XRD, SEM, and FT-IR analyses, as well as rheological and DMA measurements. The results indicated that the composites are interconnected with hierarchical pores, and the diameter of the voids is 10–50 μm. The directly prepared monoliths exhibited relatively high stresses at 82% strain and recovered their shape quickly. The adsorption capacity of the composites for methylene blue (MB) is 50 mg g−1 at a faster adsorption rate. The monoliths also exhibit underlying applications in edible oil–water separation.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Zhan Li,PingPing Yang,Shichen Yan,Qianrong Fang,Ming Xue,Shilun Qiu
An upsurge in searching membranes with high selectivity, permeability, and stability, which have been considered to be promising in the membrane-based gas separation process, has received huge attentions in academia and industry. In this work, we demonstrated a new molecular sieving ZIF membrane, which has a unique mixed-ligand ZIF structure constructed by two bulk imidazolate linkers within the zeolite GIS topology, resulting in appropriate aperture size, strong affinity to CO2, exceptional thermal and chemical stabilities, and superhydrophobic properties. Benefited from these features, the resulting JUC-160 membrane indeed exhibited remarkable separation efficiency and stability, with excellent H2/CO2 selectivity of 26.3 and considerable H2 permeance of 9.75 × 10–7 mol m–2 s–1 Pa–1 under high temperature up to 200 °C. Furthermore, owing to its superhydrophobicity, the JUC-160 membrane could maintain its prominent separation performance even with the presence of steam.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2021
·
IF 5.097
Yongdi Zhang,Shaowen Wu,Yuanzhi Li,An Zhang,Qianqian Hu,Jichun Wu,Xin Tan
A unique nanocomposite of Rh quasi-monolayer clusters supported on spinel MgAl2O4 nanosheets with a low Rh loading of 0.15 wt % (Rh/MgAl2O4-MC) was synthesized by a facile method. By the catalyst design, nearly all of Rh atoms are utilized like well-known surface single-atom catalysts. More importantly and surprisingly, Rh/MgAl2O4-MC shows extremely high specific reaction rates of CH4 (rCH4) and CO2 (rCO2) per mole Rh and turnover frequency (TOF) for catalytic CO2 reforming of CH4 (DRM). Its rCH4 and rCO2 are as high as 51.14 and 62.65 mol molRh–1 s–1, which are 4.7 and 4.8 times higher than those of conventional Rh nanoparticles supported on spinel MgAl2O4 nanosheets with a higher Rh loading of 0.96 wt % (Rh/MgAl2O4-NP), respectively. Its TOF values of CH4 and CO2 are as much as 53.9 and 66.1 s–1, which are 3.5 and 3.5 times higher than those of Rh/MgAl2O4-NP, respectively. Meanwhile, Rh/MgAl2O4-MC retains the excellent catalytic durability of supported nanoparticles with negligible side reaction of carbon deposition, which is in striking contrast to the prone deactivation of the single-atom catalysts of precious metals (e.g., Rh and Ru) reported. Experimental evidence and DFT calculations reveal the presence of a strong interaction between Rh quasi-monolayer clusters and MgAl2O4 for Rh/MgAl2O4-MC. The interaction not only makes energetically unstable clusters stable but also alters the reaction pathway of DRM. Compared to DRM on Rh nanoparticles, the oxidations of C* and CH* species as the rate-determining step of DRM are significantly accelerated on Rh quasi-monolayer clusters due to their activation energies being considerably reduced, thus improving intrinsic catalytic activity and inhibiting the side reaction of carbon deposition.
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2024
·
IF 7.1
Linjia Li,Yiran Zhang,Jiaqi Feng,Shu Zhao,Ke Li,Zhen Huang,He Lin
Integrated carbon capture and utilization (ICCU), based on dual-function materials (DFMs), is an emerging technology for carbon dioxide (CO2) emission control. DFMs composed of Ni–Ca–Al systems are favored owing to their affordability. However, their performance needs to be further improved. In this study, Ni/AlCaOx DFMs are prepared by one pot-impregnation method, reaching an adsorbing capacity of 1796 μmol CO2/gDFM and a production of 1790 μmol CH4/gDFM after ten cycles at 450 °C. The Ni–Ca–Al synergistic effect was investigated to understand the good performance of DFMs: during H2 pretreatment, Ca can weaken the strong interaction of Al–Ni and promote the reduction of NiO by facilitating Ni to gain electrons from H2, where Al may act as an intermediate carrier for electron transfer. In the carbonation process, Al modulates the synergistic interaction between Ca and Ni by regulating the spacing and distribution of catalytic and adsorption sites to improve the Ni/AlCaOx cycling performance. Besides, oxygen vacancies can also enhance the DFMs’ carbon capture performance. During the methanation process, Ni reduces the decomposition temperature of the carbonate formed at strongly basic sites, favoring the methanation reaction.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Rui Ding,Yan Dai,Wenji Zheng,Xiangcun Li,Xiaoming Yan,Yi Liu,Xuehua Ruan,Shaojie Li,Xiaochen Yang,Kai Yang,Gaohong He
The trade-off between gas permeability and selectivity represents a huge challenge for membrane separation. In this work, we design unique polystyrene-acrylate (PSA) modified hollow ZIF-8 (PHZ) nanospheres via a facile hard template-incomplete etching strategy as fillers for mixed matrix membranes (MMMs). In the vesicles shaped PHZ, the hollow core builds a low-resistance CO 2 transport freeway, leading to improved CO 2 permeability. Meanwhile, the outside PSA layer intensifies the interface affinity between ZIF-8 and Pebax through molecular chains entanglements and hydrogen bonding, enhancing membrane selectivity. Through controlling the PSA etching process, both the hollow core with tunable size and the outside PSA layer with adjustable thickness are achieved. The 10 wt% PHZ-2/Pebax MMMs present the best performance with a CO 2 permeability of 172.4 Barrer and CO 2 /N 2 selectivity of 87.9. The higher CO 2 /N 2 selectivity proves that the PSA layer on the PHZ has better compatibility with Pebax. The higher CO 2 permeability is attributed to the low-resistance hollow core. The gas separation performance of PHZ-based MMMs not only well exceeded the 2008 Robeson upper-bond line but also was superior to those of other published MOF-based MMMs. The concept of vesicle-shaped PHZ paves a way to concurrently enhance both the gas permeability and selectivity of MMMs.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2021
·
IF 5.097
Zewei Jia,Shangbo Ning,Yuxin Tong,Xin Chen,Huilin Hu,Lequan Liu,Jinhua Ye,Defa Wang
Photothermal reverse water gas shift reaction is one of the promising methods to palliate global energy and environmental issues. Searching for catalysts with high activity and CO selectivity for CO2 conversion has been attracting extensive attention. In this work, Ni nanoparticle-loaded N-doped CeO2 (Ni/N-CeO2) composite catalysts were synthesized using a three-step method. Under light irradiation, the optimal Ni/N5.0-CeO2 exhibited a CO yield rate of 20.9 mmol·gcat–1·h–1 with almost 100% of CO selectivity via photothermal CO2 reduction. As a comparison, Ni/CeO2, without nitrogen doping, showed a high CH4 selectivity. The strong light absorption of Ni/N5.0-CeO2 mainly by loading of Ni nanoparticles and the enhanced adsorption/activation of CO2 molecules due to increased oxygen vacancies in N5.0-CeO2 by N-doping were supposed to account for the excellent catalytic performances. The doping of nitrogen was of particular importance for the formation of N–H bonds, which could modulate the reaction pathway for promoting the reduction of CO2 toward CO while suppressing the undesirable CO2 methanation process.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Yanzhu Ye,Ying Liu,Zhongshui Li,Xiaohuan Zou,Hui Wu,Shen Lin
The Cu-In 2 O 3 /C nanocomposite was prepared by a simple solid-phase reduction method. The introduction of In 2 O 3 into Cu/C to form the Cu-In 2 O 3 /C nanocomposite evidently enhances the electrocatalytic activity for the selective reduction of CO 2 to CO. Specifically, the Cu-In 2 O 3 /C nanocomposite exhibits higher Faraday efficiency ( FE = 86.7%) at −0.48 V vs. the reversible hydrogen electrode (RHE) in the electrocatalytic reduction of CO 2 to CO and larger current densities (55 mA cm −2 ) under a low overpotential (−1.08 V vs. RHE). These indicate its superior performance over many of the reported Cu-based catalysts [1] , [2] , [3] , [4] . It was also found that by rationally adjusting the applied potential, tunable syngas can be formed, which can be used to synthesize formic acid, methyl ether, methanol, synthetic fuels, or other bulk chemicals through appropriate industrial processes. Furthermore, the Cu-In 2 O 3 /C nanocomposite maintains good stability in the electrocatalytic reduction of CO 2 . This work demonstrates a novel strategy to convert CO 2 into desired products with high energy efficiency and large current density under low overpotential by the rational designing of non-precious metal catalysts.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2018
·
IF 3.909
Jiawen Chen,Shuning Chen,Wei Cheng,Jinhuo Lin,Shisheng Hou,Haiqing Liu,Qinhui Chen
Effective control of bleeding is critical to saving lives whether on the battle field or in civilian life. Microporous starch (MS) is a promising hemostat for its extensive sources, huge surface area and good biocompatibility. However, the hemostatic performance of MS is limited because of its complex preparation process and lack of effective component to activate coagulation factors . Herein, porous starch microspheres modified by calcium (Ca-PSM) with dense shell and honeycomb micro-porous core were prepared by electrostatic spray and supercritical CO 2 for the first time. The topological morphology of Ca-PSM changed with the increase of Tween-80 content within 0.5%. Ca-PSM possessed excellent water absorbability due to high specific surface area, and what's more, it showed good hemostatic performance because of the synergistic effects of physical adsorption and chemical activation mechanisms. The results of thrombelastograph (TEG) showed that the initial clotting time (R) and coagulation time (R + K) of Ca-PSM-1 were shortened by 47.1%, 53.3% than that of control group. The maximum blood clot strength (MA) of Ca-PSM-1 was also significantly raised. Furthermore, it was noteworthy that Ca-PSM could activate clotting cascade and induce erythrocyte adsorption. In summary, Ca-PSM as a hemostat will be a promising and alternative candidate for clinical application.
✓ 已验证
DOI
高影响因子
Green Chemical Engineering
·
2020
·
IF 0
Zhong Gao,Yanan Wang,Hong Wu,Yanxiong Ren,Zheyuan Guo,Xu Liang,Yingzhen Wu,Yutao Liu,Zhongyi Jiang
Membrane separation technology offers a green, efficient and energy-saving approach for biogas upgrading. Membranes with high selectivity and high permeability are the key to achieve high performance. Polymers of Intrinsic Microporosity (PIMs) materials have shown excellent gas permeability but low selectivity which limits their practical application. Herein, a polyphenol, tannic acid, was coated on the PIM-1 membrane surface by a facile dipping method to fabricate composite membranes. Tannic acid containing a large number of polar oxygen-containing groups (quinone, phenolic hydroxyl) self-polymerized on the membrane surface to form a CO 2 -philic, defect-free and thin layer. The CO 2 /CH 4 selectivity of the resultant composite membranes was increased after tannic acid coating while the permeability remained comparable to or even higher than pristine PIM-1 membrane, exceeding the reported 2008 upper bound.
✓ 已验证
DOI
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2020
·
IF 16.683
Xianying Wang,Yingshu Wang,Meichao Gao,Jinni Shen,Xipeng Pu,Zizhong Zhang,Huaxiang Lin,Xuxu Wang
Construction of composite semiconductors is an effective solution to elevate the efficiency of photocatalysis by prolonging lifetime of photogenerated hole and electrons. Herein, a heterojunction structure composite BiVO 4 /Bi 4 Ti 3 O 12 was synthesized via a facile in situ hydrothermal condition. The novel composite photocatalyst has excellent photocatalytic ability to reduce CO 2 with H 2 O into CH 3 OH and CO. The BiVO 4 /10 % Bi 4 Ti 3 O 12 sample shows the highest yields of CH 3 OH and CO up to 16.6 and 13.29 μmol g −1 h −1 , which was 12.39 and 5.68 times higher than that of pure BiVO 4 , and 9.88 and 2.80 times higher than that of pure Bi 4 Ti 3 O 12 , respectively. Such a high activity is attributed to the type II heterojunction structure which significantly enhances separation of photogenerated carriers and promotes collaboration between the water oxidation on the Bi 4 Ti 3 O 12 and the CO 2 reduction on BiVO 4 . The photocatalytic reaction mechanism of CO 2 on the composite was proposed according to experiment results.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2017
·
IF 7.504
Yufei Zhang,Jiming Guan,Xianfeng Wang,Jianyong Yu,Bin Ding
Amine-containing sorbents have been extensively studied for postcombustion carbon dioxide (CO2) capture because of their ability to chemisorb CO2 from the flue gas. However, most sorbents are in the form of powders currently, which is not the ideal configuration for the flue gas separation because of the fragile nature and poor mechanical properties, resulting in blocking of the flow pipes and difficult recycling. Herein, we present a novel approach for the facile fabrication of flexible, robust, and polyethyleneimine-grafted (PEI-grafted) hydrolyzed porous PAN nanofibrous membranes (HPPAN-PEI NFMs) through the combination of electrospinning, pore-forming process, hydrolysis reaction, and the subsequent grafting technique. Excitingly, we find that all the resultant porous PAN (PPAN) fibers exhibit a balsam-pear-skin-like porous structure due to the selective removal of poly(vinylpyrrolidone) (PVP) from PAN/PVP fibers by water extraction. Significantly, the HPPAN-PEI NFMs retain their mesoporosity, as well as exhibit good thermal stability and prominent tensile strength (11.1 MPa) after grafting, guaranteeing their application in CO2 trapping from the flue gas. When exposed to CO2 at 40 °C, the HPPAN-PEI NFMs show an enhanced CO2 adsorption capacity of 1.23 mmol g–1 (based on the overall quantity of the sample) or 6.15 mmol g–1 (based on the quantity of grafted PEI). Moreover, the developed HPPAN-PEI NFMs display significantly selective capture for CO2 over N2 and excellent recyclability. The CO2 capacity retains 92% of the initial value after 20 adsorption–desorption cycle tests, indicating that the resultant HPPAN-PEI NFMs have good long-term stability. This work paves the way for fabricating NFM-based solid adsorption materials endowed with a porous structure applied to efficient postcombustion CO2 capture.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2013
·Vol. 21
·期 10
·1098-1105
·
IF 0.92
Yaqun ZHU,Zhi WANG,Chenxin ZHANG,Jixiao WANG,Shichang WANG
The membrane-based CO 2 separation process has an advantage compared to traditional CO 2 separation technologies. The membrane is the key of the membrane separation process. In this paper, preparation, characterization and laboratory testing of the membrane, which was prepared from sodium alginate, hydrogen bond cross-linked with sodium tartrate and used for CO 2 /N 2 separation, were reported. The resistance to SO 2 of the membrane was also investigated. The experimental results demonstrate that the membrane possesses a high resistance to SO 2 . Finally, based on experimental results, the economic feasibility of the membrane used for CO 2 /N 2 separation was evaluated, indicating the two-stage membrane process can compete with the traditional chemical absorption method.
✓ 已验证
DOI
高影响因子