Nanoscale Advances
·
2022
·Vol. 4
·期 20
·4314-4320
·
IF 5.598
Tingting Wang,Qiuxiao Zhu,Qi Zhu,Qifeng Yang,Shuangfei Wang,Lianxin Luo
Triboelectric nanogenerators (TENGs) have garnered considerable attention as an emerging energy harvesting technology. To improve the electrical properties of the triboelectric materials in TENGs, various micro- and nanomaterials with strong charge-trapping capabilities are introduced as filler materials. However, the fillers generally perform a single function and lack long-term operational durability. Hence, further research is required to achieve stable and efficient TENGs. In this study, NH2 metal–organic frameworks (NH2-MOFs) were combined with a cellulose nanofiber (CNF) to prepare a composite film. NH2-MOFs have an aminated bimetallic organic backbone with strong charge-induction and charge-trapping capabilities. Thus, their addition significantly improved the stability, positive triboelectric properties and charge-trapping performance of the composite film. The optimized composite film and a fluorinated ethylene propylene film were used as triboelectric pairs to assemble a TENG. The electrical performance of the TENG was approximately 230% greater than that of a TENG with a pure CNF film and remained very stable for at least 90 days. These results demonstrate that NH2-MOFs are promising fillers for improving the performance of TENGs and expanding the range of materials used in TENG construction.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2022
·Vol. 139
·期 42
·e53031
·
IF 3.057
Shuxian Yu,Changjun Zhao,Jie Wei,Shuai Jia,Pan Chen,Ziqiang Shao,Shaoyi Lyu
In this study, cross-linked cellulose nanocrystals (CNC) were esterified using 1,2,3,4-tricarboxylic acid (BTCA) to decrease the hydroxyl content of the nanocellulose, control its hydrophilic/hydrophobic degree, and improve its compatibility with the polypropylene (PP) matrix. The mechanical and physical properties of nanocellulose-reinforced polypropylene composites were investigated after they were manufactured via melt extrusion using a twin-screw extruder. FTIR and XPS analysis revealed that the nanocellulose chain was successfully esterified utilizing BTCA. The results from SEM and Mapping demonstrated that the nanocellulose was spread equally throughout the matrix. By characterizing the 5 wt% CNC/PP composite material with DMA and tensile testing devices, the elongation at break decreases, the rigidity increases, and the tensile strength increases to 50.5 MPa, a 25.5% increase over pure polypropylene. Simultaneously, DSC data demonstrated that nanocellulose provided a heterogeneous nucleation site, expedited polypropylene crystallization, and was advantageous for polypropylene processing. According to the results of TG/DTG, esterified CNC/PP composites containing 5% CNC had the highest thermal resistance, with T onset and T max increasing by up to 66 and 11.6°C, respectively, when compared to pure PP. Following a thorough investigation and evaluation of the samples' mechanical and thermal properties, it was determined that BTCA esterification cross-linking is an effective method for surface modification of nanocellulose, as it increases the compatibility of nanocellulose with polypropylene, improves the mechanical properties of polypropylene, and thus expands its application range.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2021
·Vol. 139
·期 12
·51821
·
IF 3.125
Jun Wu,Dun Wang,Fanrong Meng,Jihui Li,Chunqing Huo,Xueyu Du,Shuying Xu
In this study, coconut coir was chemically converted to coir-polyols (CP) via atmospheric liquefaction under microwave assistance, during which a combination of polyethylene glycol 400 and glycerol, and 98% sulfuric acid were applied as the liquefaction solvents and catalyst, respectively. The obtained CP was then analyzed in terms of its molecular weight distribution, hydroxyl values, and functional groups. Later, CP/polyvinyl alcohol (PVA) bio-composite films reinforced without and with coir cellulose nanofibrils (CCNF) were prepared. After comprehensive characterization, the CP/PVA films exhibited higher stability in medium-temperature range, while the CCNF/CP/PVA films on the other hand possessed higher properties of tensile strength, elongation at break, and water resistance. The proper dosage of reinforcing agents for preparing PVA-based ternary blend films were proposed at 3% of CCNF and 10% of CP (based on film dry weight), which exhibited the best balance of properties in the critical parameters such as tensile strength and elongation at break.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2021
·Vol. 28
·期 16
·10373-10384
·
IF 5.044
Cao Qinghua,Dai Jinyue,Bao Xin,Zhang Zhenyu,Liu Fei,Feng Yuhong,Na Haining,Zhu Jin
Abstract A series of cellulose-based fluorescent materials are prepared under relative mild conditions by use of the DMSO/1,8-diazabicyclo[5.4.0]undec-7-ene (DBU)/CO 2 system to utilize as coating pigments. Through the observation under 365 nm UV light, the cellulose-based fluorescent materials exhibit good fluorescence response and bright color. Furthermore, due to the limitation of the molecular skeleton of cellulose, the intrinsic aggregation caused quenching phenomenon commonly existed in conventional organic fluorescent pigments can be effectively inhibited, which is very helpful to retain good fluorescence response in epoxy-based coating material and its coating films. Moreover, the addition of cellulose-based fluorescent materials also increases the mechanical properties of the coating film. The increase of tensile strength and tensile modulus respectively reaches ~39% and ~66%. Solvent resistance and thermal property of the coating films generally remain unchanged. The fabrication of cellulose-based fluorescent materials in DMSO/DBU/CO 2 system provides a feasible way to develop the functional application of cellulose. Graphic abstract
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2021
·
IF 9.381
Qingran Guan,Qisan Ma,Yanna Zhao,Xinxin Jiang,Huaizhen Zhang,Min Liu,Zhengping Wang,Jun Han
Amorphous solid dispersions (ASDs) are regarded as one of the most promising techniques for poorly-soluble active pharmaceutical ingredients (API). However, the thermodynamic instability of ASDs at supersaturated state makes them easy to recrystallize in aqueous media. In this study, ritonavir (RTV) was selected as a model drug for evaluating the solubility enhancement and recrystallization inhibition effect of various cellulose derivatives and the combinations of them with typical surfactants. Combination of HPMCAS-HF/SLS was filtrated for preparing ternary RTV solid dispersions (RTV SD) via solvent evaporation method. RTV SD exhibited enhanced dissolution manner, while the oral bioavailability of RTV SD was equivalent with the Reference Standard Norvir® but increased significantly compared to the ternary physical mixture. Thus, the ternary SD system might be promisingly employed as efficient drug delivery system for RTV, while the HPMCAS-HF/SLS combination could be recommended as effective excipient for fabricating steady solid dispersions loading poorly soluble API.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Miao Cheng,Jing Hu,Jianqiang Xia,Qianqian Liu,Tao Wei,Yun Ling,Wanfei Li,Bo Liu
The confinement of phase change material (PCM) within 3D porous structure has been identified as an attractive and efficient strategy to fabricate high performance shape stable PCM (SSPCM). Nevertheless, the conventional fabrication techniques suffer limitations such as cumbersome preparation process, the usage of toxic reagents and high-cost additives. Herein, an ingenious and green one-step in-situ synthesis method was developed to prepare SSPCM, which was constructed by the combination of polyethylene glycol (PEG) within chemically cross-linked cellulose nanocrystal (CNC) aerogel. The as-prepared CNC/PEG phase change aerogel composite exhibited excellent shape stability, even when compressed upon the melting point of PEG , the composite still maintained its original shape without any leakage. Meanwhile, the composite possessed high phase change enthalpy of 145.8 J/g and extraordinary cyclic reversibility after 100 thermal cycles. Specifically, the thermal conductivity and mechanical properties of the novel CNC/PEG phase change aerogel composite were dramatically improved due to the higher thermal conductivity of CNCs and the chemically cross-linked CNC framework. This work established a promising sustainable approach for the exploitation of CNC/PEG phase change aerogel composite with outstanding comprehensive properties, which would offer great opportunities for applications in thermal energy storage systems.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Aiping Zhang,Yucheng Zou,Yuhang Xi,Peng Wang,Yue Zhang,Liangru Wu,Hui Zhang
The feasibility of using unmodified bamboo shoot cellulose (BSC) to produce composite aerogels with sodium alginate (SA) in a fast and green way for sustained release of curcumin was explored for the first time, in which calcium ion-induced SA cross-linking could effectively retain the structural stability of aerogel skeleton. The aerogels were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and differential scanning calorimetry . The encapsulation and release of curcumin from aerogels were studied while the antioxidant activity of encapsulated curcumin was investigated. Curcumin was evenly encapsulated in the composite aerogels and showed a sustained release behavior, followed the first-order rate expression. Interpenetrating network structures were built between BSC and SA mainly through hydrogen bonding, which could be further reinforced by the cross-linking of CaCO 3 on the SA matrix. The original characteristics of BSC in the composite aerogels were well retained. The thermal stability and mechanical properties of the composite aerogels were improved by Ca 2+ -induced cross-linking, while the uncross-linked composite aerogels exhibited better encapsulation efficiency and in vitro antioxidant activity. Overall, this study was the first to use cellulose from bamboo shoot to develop aerogels for drug delivery purposes. The cellulose/alginate composite aerogels were promising to be used as biocompatible carriers for drug and nutraceutical delivery.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2021
·
IF 4.539
Chunxia Pang,Haijun Wang,Xiaoyan Lin
Atmospheric particulate matter (PM) pollution is a serious threat to human health, so the preparation of electret films with high efficiency and low resistance capturing particulate has attracted wide attention. Herein, a strategy for the fabrication of all-polymer hybrid electret fiber membranes by electrospinning is reported based on the ethyl cellulose (EC) and polystyrene (PS). The preparation conditions of electret fiber membrane were optimized by focusing on the effect of the mass ratio of EC/PS and the spinning time on the structure, surface potential and purification performance of fiber membrane. The result showed that the fiber membrane has a low fiber diameter of 572 ± 113 nm and porosity of 82.4%, and a better potential stability when the EC/PS mass ratio was 2.5/1 and the spinning time was 10 min. As a result of the enhanced effect of electrostatic attraction on particle capture, the EC/PS composite electret membrane could make the purification efficiency of PM2.5 reach to100% within 11 min. Moreover, the EC/PS composite electret membrane has the properties of ultra-light base weight of 1.08 g·m −2 , low air resistance of 28 Pa and long service life. Therefore, the all-polymer EC/PS electret nanofiber membranes have broad application prospects in the field of air purification .
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2021
·
IF 9.381
Tingting Zhang,Hualin Wang,Dongxiu Qi,Li Xia,Linlin Li,Xingjiang Li,Shaotong Jiang
A colorimetric cellulose acetate (CA) membrane incorporated with Perilla frutescens (L.) Britt. anthocyanins (PFA) and chamomile essential oil (CO) is developed via electrospinning technique for food freshness monitoring and shelf-life extending. The moieties of PFA and CO are well-dispersed in fiber matrix by hydrogen bonds and their incorporation increases the fiber size but with no obvious influence on the fiber morphology at incorporation levels. The presence of CO enhances membrane hydrophobicity . The target membrane of CA-PFA6-CO15 (PFA6%, CO15%) has a wide color change range of pH 2–12 which is high sensitive and reversible towards external pH-stimuli. The membrane has good antibacterial activity against E. coli and S. aureus besides antioxidant activity . The release of bioactive moieties is predominantly controlled by Fickian diffusion. The target membrane can simultaneously monitor pork freshness in real-time and double the shelf-life at 25 °C, indicating its potential application in active and intelligent food packaging.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Membranes
·
2021
·Vol. 12
·期 1
·9
·
IF 4.106
Jianming Wang,Hongchen Song,Longfei Ren,Md Eman Talukder,Shunquan Chen,Jiahui Shao
As a kind of eco-friendly (biodegradable) material and with a natural anti-fouling ability, cellulose acetate (CA) is more suitable for single-use membrane (especially in bioprocess). In this study, the method for preparing CA membrane by Vapor-assisted Nonsolvent Induced Phase Separation (VNIPS) was studied. The influences of ratio compositions (solid content, acetone/N,N-Dimethylacetamideratio, glycerol/CA ratio) and membrane preparation conditions (evaporation time, evaporation temperature and humidity) on the microstructure and other properties were systematically evaluated. Results indicated that acetone/N,N-Dimethylacetamideratio and glycerol/CA ratio had great influence on the cross-section structure of membranes. Additionally, the membrane with homogeneous sponge-like porous structure could be prepared stably within certain limits of ratios. Under the premise of keeping the content of other components fixed, the separation membrane with a full sponge pore structure can be obtained when the ratio of glycerol/CA is ≥2.5 or the acetone/solvent ratio is between 0.25 and 0.5. Evaporation time and temperature, humidity and other membrane preparation conditions mainly affected the surface morphology and the pore size. This kind of high-performance membrane with homogeneous sponge-like pore and controllable surface morphology could be potentially used for bioseparation processes.Keywords:cellulose acetate membrane;sponge-like porous structure;pore size control;high-performance separation
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Hangzhen Zhang,Kun Wu,Enxiang Jiao,Yingchun Liu,Jun Shi,Mangeng Lu
The fabrication of polymer composites with excellent thermal conductivity typically involves complex matrix or fillers modifications. This study proposed a simple technique based on precursor selection for obtaining highly thermally conductive cellulose nanofiber (CNF)/supramolecule-synthesized carbon nitride (SCN) composites. Fourier-transform infrared tests demonstrated the construction of hydrogen bonds between CNF and SCN; a highly ordered structure and relatively compact in-plane stacking were confirmed via scanning electron microscopy and X-ray diffraction characterizations. Consequently, the resultant CNF/SCN composites exhibited remarkable in-plane thermal conductivity of 11.83 ± 0.41 W m −1 K −1 at 30 wt% SCN content, which was attributed to the significantly reduced interfacial phonon scattering. It also showed evident improvements in electrical insulation and flame retardancy compared with the pure CNF film, where the volume resistivity, peak heat release rate, and total heat release were remarkably enhanced by 1242% and reduced by 59.9% and 15.8%, respectively. Further analysis of char residuals revealed a relatively dense surface, high concentration of carbon materials, and a high degree of graphitization, indicating that the char residual functioned as a robust physical barrier to effectively inhibit combustion. This study provides a facile approach to achieving high-efficiency improvements in thermal conductivity and flame retardancy, and simultaneously facilitating broader applications of carbon nitride in thermal management.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2021
·
IF 8.198
Zheng Zhou,Xin Ju,Yuyang Zhou,Yinghui Mu,Liangzhi Li
Enzyme-loaded microgels (μ-Gelzymes) have gained increasing attention for their facile fabrication, versatile applicability, and fine controllability. Herein, a series of poly(N-isopropylacrylamide) (PNIPAM)-based μ-Gelzymes (P-C) with a tunable surface potential were prepared to improve the cellulase biocatalytic effect. The P-C showed better cellulose affinity than free cellulase, highly reducing its nonproductive binding onto lignin, while the Langmuir adsorption affinity indexes (K) of P-C for cellulose and lignin were 1.19 and 0.34 g/L, whereas those of free cellulase were 0.44 and 3.92 g/L, respectively. Moreover, the biomass synergistic pretreatment with 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc) and choline acetate ([Ch]OAc) resulted in an almost equal ζ-potential on lignin, cellulose, and hemicellulose. Microcrystalline cellulose (MCC) and bagasse (BC) substrate conversions achieved by P-C were 19.8 and 12.1% higher than those with free cellulase under 3% [Ch]OAc + 7% [EMIM]OAc in situ saccharification. The P-C ζ-potential and biomass glucose production demonstrated that the more the electroneutrality on P-C, the higher the glucose generation, suggesting that biomass saccharification can be controlled by adjusting the surface charge on μ-Gelzymes.
✓ 已验证
产品关联
DOI
高影响因子