APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2019
·Vol. 125
·期 11
·765
·
IF 1.784
Xiao Xuling,Li Jun,Wu Jie,Lu Donglin,Tang Chao
In this paper, the negative photoconductivity (NPC) was observed in molybdenum disulfide (MoS 2 ) prepared by chemical vapor deposition. The conductivity drops by 15% in stable light excitation. We speculate that the generation of NPC is due to the electronic transition to the defect state level, which reduces the rate of movement of non-equilibrium carrier. In the low-defect system, free excitons predominate, and the material exhibits positive photoconductivity. It is beneficial to the research on a new single-wavelength photodetector based on NPC.
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2013
·Vol. 180
·期 7
·545-553
·
IF 3.434
Zhu Shanshan,Gan Ning,Pan Daodong,Li Yi,Yang Ting,Hu Futao,Cao Yuting,Wu Dazhen
We have prepared core-shell magnetic molecularly imprinted polymer nanoparticles for recognition and extraction of tributyl tin (TBT). The use of particles strongly improves the imprinting effect and leads to fast adsorption kinetics and high adsorption capacities. The functional monomer acrylamide was grafted to the surface of Fe 3 O 4 nanospheres in two steps, and MIP layers were then formed on the surface by creating a MIP layer on the surface consisting of poly(ethyleneglycol dimethacrylate) with a TBT template. The particles were characterized in terms of morphological, magnetic, adsorption, and recognition properties. We then have developed a method for the extraction of TBT from spiked mussel (Mytilidae), and its determination by liquid chromatography-tandem mass spectrometry. The method has a limit of detection of 1.0 ng g −1 ( n = 5) of TBT, with a linear response between 5.0 and 1,000 ng g −1 . The proposed method was successfully applied to the determination of trace TBT in marine food samples with recoveries in the range of 78.3–95.6 %. The preparation procedures of core-shell magnetic molecularly imprinted polymer nanoparticles for recognition and extraction of tributyl tin (TBT) in seafood
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2020
·Vol. 55
·期 20
·8642-8650
·
IF 3.553
Chen Shaoping,Xu Libin,Li Rong,Fan Wenhao,Chen Yanzuo,An Decheng,Wang Wenxian,Wu Yucheng
Energy filtering effect is helpful to decouple Seebeck coefficient and electric conductivity, and dopant is helpful for improving conductivity; in this work, synergetic function of both is supposed to enhance zT values of tellurium.
In bulk Te and Sb 0.003 Te 0.997 , the Ni/Te heterojunction was built by electroless plating combined with spark plasma sintering. The Ni/Te interface barrier successfully decoupled the relationship between the Seebeck coefficient and the electrical resistivity. The Seebeck coefficient and resistivity of Ni/Te samples increased by 37.9% and decreased by 28.1%, respectively. Meanwhile, the thermal conductivity of the Ni/Te samples decreased by 25.8% (T = 300 K), and the zT value was increased by 36.4% compared to the pure Te sample. Consequently, a peak zT of 0.96 at 550 K is achieved in 18wt %Ni/Sb 0.003 Te 0.997 sample,which is 50% higher than Sb 0.003 Te 0.997 samples. This work indicates that electroless plating combined with spark plasma sintering is an effective method to construct heterojunction in bulk materials. This method should be widely applicable to various materials for achieving better thermoelectric properties.
研究领域:
材料科学
·
凝聚态物理
·
能源材料
·
半导体物理
·
热电转换
✓ 已验证
DOI
高影响因子
IONICS
·
2024
·Vol. 30
·期 6
·3111-3119
·
IF 2.4
Teng Zeyu,Wang Zhilong,Li Zhongcheng,Chen Kanghua
Silicon is a strong competitor for the anode of the next generation of lithium-ion batteries, and ball-milled silicon has broad prospects as a low-cost method for preparing nano silicon. In order to match ball-milled silicon, it is imperative to develop better bonding agents with lower costs. Through adding amino silane coupling agent, the performance of ball-milling silicon anode is enhanced. This study explored the network structure formed by amino silane coupling agent with different chain lengths and polyacrylic acids. Herein, the crosslinked network prepared with 3-[2-(2-aminoethyl amino) ethyl amino] propyl-trimethoxysilane as coupling agent had the best performance, and the initial discharge capacity of the silicon anode prepared by this binder reached 3297.4 mAh·g −1 at a constant current density of 0.5A·g −1 , the initial Coulomb efficiency reached 92.25%. After 100 cycles, the discharge capacity of anode was still maintained at 2229.5 mAh·g −1 with excellent charge/discharge performance.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
高分子化学
·
表面改性
✓ 已验证
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2023
·Vol. 129
·期 11
·794
·
IF 2.7
Wang Xuekai,Cao Yongze,Yan Xianglan,Li Lei,Zhang Xizhen,Zhang Jinsu,Chen Baojiu
17K 2 O–33SnO–50P 2 O 5 –xMnCl 2 glasses with x = 0, 0.6, 1.2, 1.8, 2.4, 3.0 were made using melt quenching at 500 °C low temperature. The structure and photoluminescence properties of these glasses were investigated, and the water resistance was evaluated. The experimental results show that the effectively energy transfer from Sn 2+ to Mn 2+ occurs, and when Mn 2+ doping at 3.0, the energy transfer efficiency reaches 74%. Under 340 nm excitation, the emission wavelength is in the range of 500–800 nm, covering the absorption wavelength of chlorophyll P R and P FR , which indicates that the low temperature glasses can be used for plant cultivation. This glass material was immersed in water for 24 h, and the luminescence intensity decreases 10%. This indicates that the glass material has certain waterproof property.
研究领域:
材料科学
·
农业光学
·
无机非金属材料
·
光生物学
·
功能玻璃
✓ 已验证
DOI
高影响因子
JOM
·
2020
·Vol. 72
·期 9
·3179-3185
·
IF 2.054
Wang Xun,Jiao Fen,Qin Wenqing,Li Zihan,Wang Na,Liu Wei,Yang Congren
Waste printed circuit boards (WPCBs) are an essential component in electronic waste (e-waste), and contain a number of valuable metals (e.g., Cu, Sn) as well as non-metal resources (e.g., brominated epoxy resin). Currently, most of the non-metals are disposed of in landfills, causing environmental problems. In this study, a combination of pyrolysis and physical separation is proposed to recover valuable resources, including both metals and non-metals, from WPCBs. The WPCBs were pyrolyzed at 700°C under a nitrogen atmosphere. Pyrolysis oil and gas can be reused as fuel for the pyrolysis of WPCBs. Metals like copper, tin, and iron in the pyrolysis residues were separated by selective crushing, sieving, gravity separation, and magnetic separation. Finally, rich copper (Cu 82.21%, Sn 1.47%), rich tin (Cu 53.20%, Sn 13.43%), rich iron (Fe > 63%), and non-metal products were obtained, and the total recoveries of copper, tin, and iron were 95%, 86%, and 76%, respectively.
研究领域:
环境科学
·
资源循环利用
·
冶金工程
·
固体废物处理
·
清洁生产技术
✓ 已验证
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2024
·Vol. 130
·期 11
·835
·
IF 2.5
Kou Chen,Duan Bin,Shi Lichun,Yang Hongcai,Ni Heng,Wang Haiyuan,Ye Qing,Hu Junshan,Hu Shigang
The Sc 3+ ions doped NaYF 4 : Yb 3+ , Er 3+ upconversion (UC) nanoparticles are synthesized by thermal decomposition method. We successfully obtained the upconversion luminescence (UCL) nanoparticles from green emission to red emission through doping Sc 3+ ions with different concentrations. Based on the XRD, the phase change process of Sc 3+ ions doped NaYF 4 nanocrystalline phase were demonstrated. More importantly, through the analysis of UC spectrum data, the change in the phase of the NaY/ScF 4 : Yb 3+ , Er 3+ nanocrystalline corresponds to the change in its luminous properties. It determines that the change of crystal field will lead to the change of luminescence, and then modulate the luminescence. NaScF 4 : Yb 3+ , Er 3+ UC nanoparticles exhibit strong red light emission. In addition, the temperature-sensitive properties of the optimal doping concentration of Sc 3+ ion were tested. The sensitivity of NaYF 4 : Yb 3+ , Er 3+ nanoparticles doped with Sc 3+ ion reached the maximum value of 0.024 K − 1 at 498 K. The nanocrystalline has great application value in the fields of optical temperature measurement, biomedicine, bioprobes and colorful display.
研究领域:
材料科学
·
光学工程
·
生物医学工程
·
纳米技术
·
分子影像学
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2023
·Vol. 66
·期 5
·1810-1819
·
IF 8.1
Xiao Hongbin,Qian Qingkai,Zang Zhigang
Recently, all-inorganic cesium lead halide (CsPbX 3 (X = Cl, Br, and I) perovskite nanocrystals (NCs) have been extensively investigated for photocatalytic carbon dioxide (CO 2 ) reduction reaction (CO 2 RR). However, because the pristine CsPbX 3 NCs suffer from severe radiative recombination, it is imperative to elaborately design heterostructures to separate electron-hole pairs for achieving efficient CO 2 RR. Herein, palladium (Pd) nanoparticles (NPs) are anchored on CsPbBr 3 NCs by a photo-assisted approach for the first time. The as-prepared CsPbBr 3 @Pd NCs not only build Schottky junctions at the CsPbBr 3 /Pd interfaces that promote the carrier separation and suppress the radiative recombination, but also exhibit lower energy barriers for photocatalytic CO 2 RR than pristine CsPbBr 3 NCs according to the density functional theory calculations. The electron consumption rate reaches a striking peak of 46.2 µmol g −1 h −1 by using CsPbBr 3 @Pd NCs as photocatalysts for CO 2 RR, which is 4.8-fold of the counterpart of pristine CsPbBr 3 NCs. This work not only presents a photo-assisted strategy for anchoring Pd NPs on CsPbBr 3 NCs, but also demonstrates the great potential of using CsPbBr 3 @Pd NCs for photocatalytic CO 2 RR.
研究领域:
材料化学
·
光催化
·
纳米材料
·
环境化学
·
能源化学
·
半导体物理
·
催化化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2019
·Vol. 30
·期 18
·17440-17446
·
IF 2.195
Wang Tianxiong,Meng Xianquan
We try to synthesize In x Ga 1−x Sb nanowires on silicon (100) substrate using InSb and GaSb as source materials and we succeeded. Au film was used as catalysts. The experiment is simple and repeatable. The diameter of the grown nanowires is 60–200 nm and up to 10 microns in length. The grown nanowires have good crystallinity. Due to the doping of indium, we found that the XRD peaks of nanowires were shifted. We have fabricated fully nanostructured device using ultra-long Ag nanowires as electrodes for the I–V characteristic study, and found that the device has photoresponse characteristics and the I–V characteristic curve was asymmetric, we explain that it was due to the asymmetry of this fully nanostructured devices.
研究领域:
材料科学
·
纳米科技
·
半导体物理
·
固体电子学
·
晶体生长
✓ 已验证
DOI
高影响因子
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
·
2016
·Vol. 31
·期 1
·113-117
·
IF 0.4
Yang Peng,Zhou Shiyu,Lei Jiaheng
Ordered mesoporous ceria and ceria-zirconia with high specific surface area were prepared by nanocasting of a mesoporous silica KIT-6 template and used for soot oxidation. The as-synthesized ordered mesoporous ceria and ceria-zirconia were characterized by XRD, TEM,Nitrogen adsorption-desorption,Raman spectroscopy, and XRF. The results indicate that mesoporous ceria and ceria-zirconia possess highly ordered mesoporous structure, and exhibited excellent catalytic performance in soot oxidation. T
50 of mesoporous ceria and ceria-zirconia are 475 and 470 °C, respectively.The high catalytic activity of mesoporous materials can be attributed to the mesoporous structure and small crystallite size. Moreover, aged mesoporous materials exhibit high catalytic activity.
研究领域:
材料化学
·
催化化学
·
纳米材料科学
·
环境催化
·
能源材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2019
·Vol. 30
·期 21
·19569-19577
·
IF 2.195
Cao Renping,Xu Longxiang,Lv Xinyan,Wang Xuantian,Chen Ting,Liu Pan,Fan Ting
Novel Ca 8 La 2 (PO 4 ) 6 O 2 :Sm 3+ phosphors are successfully synthesized in air by the high temperature solid state reaction method. The X-ray diffraction patterns, morphology, energy spectrum diagram, elemental mapping, luminescence properties, concentration-dependent emission spectra, thermal stability, and decay curves are investigated. The excitation spectrum of Ca 8 La 2 (PO 4 ) 6 O 2 :8%Sm 3+ phosphor monitored at 604 nm extends the region from 220 nm to 520 nm with many excitation spectral bands because of the O 2− –Sm 3+ charge transfer band and the f – f transitions of Sm 3+ ion. Ca 8 La 2 (PO 4 ) 6 O 2 :Sm 3+ phosphor with excitation at 402 nm emits red orange light in the range of 550–770 nm with many emission spectral bands derived from the 4 G 5/2 → 6 H 5/2 (550–570 nm), 4 G 5/2 → 6 H 7/2 (570–630 nm), 4 G 5/2 → 6 H 9/2 (630–690 nm), and 4 G 5/2 → 6 H 11/2 (690–760 nm) transitions of Sm 3+ ion, and the optimal Sm 3+ concentration is ~ 8 mol%. The lifetime of Ca 8 La 2 (PO 4 ) 6 O 2 :Sm 3+ phosphor decreases from 1.39 to 1.11 ms with increasing Sm 3+ concentration from 2 to 12 mol%. Ca 8 La 2 (PO 4 ) 6 O 2 :Sm 3+ phosphor has the good thermal stability and emission color stability. The luminous mechanism, concentration quenching, and thermal quenching are explained, respectively. The experimental results indicate that Ca 8 La 2 (PO 4 ) 6 O 2 :Sm 3+ phosphor as red orange component has a potential application in white LED based on near ultraviolet LED chip.
研究领域:
材料科学
·
无机化学
·
发光材料
·
固体物理
·
光电功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2023
·Vol. 58
·期 48
·18003-18013
·
IF 4.5
Yang Yue,Ma Tianhui,Zhang Zheng
Cubic-phase Li 7 La 3 Zr 2 O 12 (LLZO) garnet is considered as a promising solid electrolyte due to high Li-ion conductivity and good chemical stability against electrode material. However, the desired cubic-phase formation of LLZO relies on the doping elements. To further improve the electrochemical performance and control the retention of lithium, a composite solid electrolyte based on Cu and Ta co-doped LLZO was fabricated by flash sintering (FS) in the present work due to the FS process characterized short sintering times and low furnace temperature, which could effectively restrain “Li-loss”. Based on the optimized Ta-LLZO conducted in our previous study, the effects of Cu 2+ content on the ionic conductivity and sintering behavior of the doped composites were discussed. The results show that Cu 2+ doping effectively stabilized the cubic structure of the co-doped composites and simultaneously promotes sinter-ability in FS process. Moreover, it is demonstrated that the room-temperature total conductivity of the Cu and Ta co-doped LLZO solid electrolyte is improved significantly by decreasing the grain boundary resistances and improving the densifications with the increasing of Cu 2+ content. In addition, the maximum ionic conductivity of 2.83 × 10 –3 S cm −1 and relative density 96.6% of the composite with Cu 2+ doping content 0.35 mol could be reached.
研究领域:
材料科学
·
固态离子学
·
陶瓷材料
·
能源材料
·
电化学
✓ 已验证
DOI
高影响因子