Science China-Technological Sciences
·
2022
·Vol. 65
·期 4
·882-892
·
IF 3.903
Wang XueZi,Yu Wei,Wang LingLing,Xie HuaQing
Latent heat storage of phase change materials (PCMs) is expected to be a suitable method to enhance the absorption and conversion of solar energy because of their high heat storage density and excellent chemical stability. However, pure organic PCMs are limited by their low thermal conductivity, photothermal conversion, and thermal energy storage efficiency in practical applications. Herein, vertically oriented network composite PCMs are synthesized using reduced graphene oxide/MXene hybrid aerogels (rGO/MXene) as carrier materials and encapsulating stearic acid (SA) as the PCM. Because of the vertically aligned MXene and rGO hybridized backbones, the thermal conductivity of the composite reaches 1.21 W/(mK), which increases 317.24%, compared to SA. The melting enthalpy of composites reaches 168.25 J/g, which almost retains the melting enthalpy of pure SA. The addition of rGO and MXene significantly improves the photothermal conversion capability of composite PCMs (≤90.19%). Irradiating the oriented and non-oriented surfaces of the composite sample, it is found that the temperature rise is faster in the orientation direction than in the non-oriented direction, and the equilibrium temperature of the orientation direction is 4.8°C higher than that of the non-orientation direction. This new material has a high potential for use in solar energy storage applications because of its excellent performance.
✓ 已验证
DOI
高影响因子
Biochar
·
2022
·Vol. 4
·期 1
·1-14
·
IF 11.452
Zeng Xue-Yu,Wang Yu,Li Rong-Xin,Cao Hai-Lei,Li Ya-Feng,Lü Jian
The textural properties and surface chemistry of phosphoric acid-modified biochars (PABCs) prepared at different pyrolysis temperatures (500–700 °C) were studied based on the results obtained from XRD, SEM, BET, FT-IR, Raman, XPS and elements analyses. PABCs prepared at higher temperatures tended to possess a bigger proportion of microporous structure. The adsorption capacity and initial rate of PABCs for sulfadiazine (SDZ) were notably improved to 139.2 mg/g and 9.66 mg/(g min) as calculated from the Langmuir model. The adsorption equilibrium time was only one quarter of that without modification. The H 3 PO 4 modification was advantageous to produce phosphate and break functional groups to form disordered carbon structure abundant of micropores. The enhancement in the adsorption of SDZ was due to the confinement effect of hydrophobic cavities from the mircoporous structure and the π–π electron–donor–acceptor interaction. Specially, PABCs exhibited stable adsorption capacities at a wide pH range (3.0–9.0) or relatively high concentrations of coexisting ions.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS LETTERS
·
2022
·Vol. 152
·期 11
·3437-3446
·
IF 2.936
Yue Yihang,Li Yong,Wang Tingting,Wang Shifeng,Han Lin,Du Chun
A Pd/CeO 2 -M with high methanol oxidation performance was prepared from metal–organic framework (MOF). The reaction results indicate that the Pd/CeO 2 -M could achieve 100% methanol oxidation at 200 °C over the traditional Pd/CeO 2 -C at 350 °C. The high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and Raman show that the Pd was uniformly distributed over the CeO 2 that was rich in oxygen vacancies. The methanol temperature program surface reaction (MeOH-TPSR) demonstrates that the Pd/CeO 2 -M could effectively decompose methanol at a lower temperature with the assistance of oxygen vacancies compared with Pd/CeO 2 -C. Methanol oxidation was conducted with in-situ Raman, CO diffuse reflectance infrared Fourier transformed spectroscopy (CO-DRIFTS) and in-situ DRIFTS to elucidate the reaction mechanism and establish the structure–activity relationship. The oxygen vacancies have participated in the assistance of methanol oxidation, which was revealed via in-situ Raman. The CO-DRIFTS indicates that the chemisorbed CO was more in linear form, which demonstrates that the Pd particles were over CeO 2 -M with a smaller size. The in-situ DRIFTS experiments show the methanol could be further effectively oxidized to bidentate formate over Pd/CeO 2 -M with the assistance of oxygen vacancies. The Pd/CeO 2 -M catalysis and its enhancement mechanism studies provided a potential strategy in the VOC removal catalysis development. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2022
·Vol. 33
·期 8
·5886-5898
·
IF 2.779
Tong Xingyu,Li Wei,Li Jiaying,Lu Shaowei,Wang Baichen,Ma Keming,Yang Chun,Li Qiuwen
Multi-component composite can effectively improve the electromagnetic interference shielding effectiveness (EMI SE) due to the synergistic effects. Herein, graphene aerogel (GA) provides a three-dimensional network framework and in situ generation of titanium dioxide (TiO 2 ) on its network layer by the sol–gel method. After microwave irradiation reduction, the titanium dioxide/microwave-reduced GA (TiO 2 /MRGA) was immersed in epoxy resin solution and cured to obtain its composite. The existence of the Ti–O–C bond proves the favorable combination of TiO 2 and MRGA. Under electromagnetic radiation, MRGA and TiO 2 generate a synergistic effect to improve the EMI SE of the composite. When the mass ratio of TiO 2 to MRGA is 1.5:1 (2.1 wt%+1.4 wt%), the composite exhibits a maximum EMI SE of 32.5 dB in the X band. Moreover, when the mass ratio of TiO 2 to MRGA is in the range of 1 to 1.8, the average EMI SE of the composites increases by 37% compared with that of the MRGA/Epoxy composite. The research indicates that this kind of EMI shielding composite has enormous application potential.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2022
·Vol. 29
·期 24
·36337-36350
·
IF 5.19
Wang Bing,Cao Qingtong,Li Guomin,Zhang Jian
Given that the biological treatment of antibiotic wastewater can easily induce resistant bacteria, the photocatalytic degradation of antibiotics is considered as a better method for treating antibiotic wastewater. Therefore, the ability to remove Tylosin (TYL) and Tetracycline (TC) in aqueous solution using rare earth element Tb-doped g-C 3 N 4 under simulated natural solar radiation was investigated. A series of rare earth Tb 3+ doped mesoporous g-C 3 N 4 were successfully prepared by nitric acid treatment and Tb(NO 3 ) 3 ·5H 2 O samples showed significantly higher degradation efficiency for TYL and TC than pure g-C 3 N 4 . Leaching toxicity experiments were carried out on the catalyst using chard seeds and demonstrated negligible toxicity of the leachate from the catalyst. The structure, elemental state, optical properties, morphology, and photogenerated carrier separation of the prepared xTCN catalysts were characterized by XRD, XPS, UV–Vis DRS, TEM, and PL. The results show that Tb doping enhanced the photocatalytic activity of the g-C 3 N 4 catalyst by narrowing the band gap while improving the light-trapping ability; The separation and transport rate of photogenerated carriers were significantly increased after Tb doping. Finally, a simple, efficient, and non-polluting Tb-doped carbon nitride photocatalyst is successfully developed in this paper.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING
·
2022
·Vol. 47
·期 6
·7123-7134
·
IF 2.807
Wang Pengjie,Xiong Liping,He Zhongyi,Xu Xin,Hu Jianqiang,Chen Qi,Zhang Renhui,Pu Jibin,Guo Lei
The corrosion inhibition effect and synergistic mechanism of novel imidazoline derivative (SMIF) and benzimidazole (BMZ) in 3.5 wt% simulated concrete solution were studied experimentally and theoretically. The complex inhibitors have the most outstanding inhibition efficiency when SMIF concentration is 0.1 g/L and BMZ is 0.9 g/L, the corrosion inhibition efficiencies of weight loss, Electrochemical Impedance Spectroscopy and Potentiodynamic polarization curve (Tafel) were 88.81%, 86.27% and 90.22%, respectively. Electrochemistry analysis results proved that the corrosion inhibition mechanism of the inhibitors in the corrosion solution was mainly the formation of a protective film on the surface of carbon steel. FT-IR, Energy Dispersive Spectroscopy and X-ray Photoelectron Spectroscopy all proved the existence of the protective film. Molecular dynamics proved that the composite inhibitor molecules could be stable on the surface of carbon steel and when consist of complex inhibitor was 0.1 g/L SMIF and 0.9 g/L BMZ the stable adsorption morphology were the highest. This work confirmed that SMIF and BMZ inhibitors have a good synergistic effect, greatly improving the inhibition efficiency and reducing the cost of corrosion inhibition, and has a certain guiding significance for synergistic inhibition.
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2022
·Vol. 65
·期 6
·1463-1475
·
IF 8.64
Zheng Xiao,Wang Zhilong,Li Jinjin,Wei Liangming
The rechargeable aluminum-sulfur (Al-S) battery is a promising alternative-energy storage device with high energy density and made of cheap raw materials. However, Al-S batteries face several obstacles, especially the shuttle effect. Herein, a binder-free S@Ti 3 C 2 T x sandwich structure film with uniform sulfur dispersion was designed. The two-dimensional (2D) layered material Ti 3 C 2 T x not only has the function of binder and conductive agent but also is a promising host for sulfur anchoring. As a result, S@Ti 3 C 2 T x film showed an initial capacity of 489 mA h g −1 at 300 mA g −1 and retained the value at 415 mA h g −1 after 280 stable cycles, with an average Coulombic efficiency of ∼95%. The film displayed higher capacity and stability than the S + Ti 3 C 2 T x cathode prepared by the slurry-coating method (the initial capacity was 317 mA h g −1 and then decayed to 222 mA h g −1 after 160 cycles). The main capacity of S@Ti 3 C 2 T x film in the Al-S battery came from the reversible redox reaction of S 2− and S. This new 2D material combined with a controllable electrode structure design paves the way for the development of Al-S batteries.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2022
·Vol. 13
·期 1
·1-10
·
IF 17.694
Zhou Jun,Gao Zhe,Xiang Guolei,Zhai Tianyu,Liu Zikai,Zhao Weixin,Liang Xin,Wang Leyu
Supports can widely affect or even dominate the catalytic activity, selectivity, and stability of metal nanoparticles through various metal-support interactions (MSIs). However, underlying principles have not been fully understood yet, because MSIs are influenced by the composition, size, and facet of both metals and supports. Using Ru/TiO 2 supported on rutile and anatase as model catalysts, we demonstrate that metal-support interfacial compatibility can critically control MSI modes and catalytic performances in CO 2 hydrogenation. Annealing Ru/rutile-TiO 2 in air can enhance CO 2 conversion to methane resulting from enhanced interfacial coupling driven by matched lattices of RuO x with rutile-TiO 2 ; annealing Ru/anatase-TiO 2 in air decreases CO 2 conversion and converts the product into CO owing to strong metal-support interaction (SMSI). Although rutile and anatase share the same chemical composition, we show that interfacial compatibility can basically modify metal-support coupling strength, catalyst morphology, surface atomic configuration, MSI mode, and catalytic performances of Ru/TiO 2 in heterogeneous catalysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY
·
2022
·Vol. 331
·期 2
·921-936
·
IF 1.754
Xia Xue,Dong Faqin,Nie Xiaoqin,Pan Ning,Liu Chang,Ding Congcong,Wang Junling,Cheng Wencai,He Huichao,Sun Shiyong,Zhang Yujing
A kind of amino groups modified polyacrylonitrile fibers (PAN-A) was prepared to extract uranium from organic-containing low-level radioactive wastewater (OC-LLRW). SEM/EDS and FTIR characterization conformed that amino group was triumphant grafed on polyacrylonitrile fibers (PAN) surface. Its adsorption capacity was 492.1 mg g −1 (pH 6.0) and can endure at least five adsorption/desorption cycles under condition of 0.1 mol L −1 HCl solution. This PAN-A can work efficiently in the organic containing waste water (urea, tetrahydrofurfuryl alcohol), while the polyvinylalcohol (PVA) exhibited an apparently suppressive effect. This phenomenon was mainly with respect to the sticky nature of PVA. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
Science China-Materials
·
2022
·Vol. 65
·期 6
·1453-1462
·
IF 8.64
Sun Qiuhong,Zhu Kai,Ji Xiangli,Chen Dandan,Han Cheng,Li Ting-Ting,Hu Yue,Huang Shaoming,Qian Jinjie
The design and preparation of non-noble metal catalysts with high catalytic activity and robust stability are important in the research of metal-air batteries and fuel cells. Here, a three-dimensional (3D) hierarchically ordered porous carbon nanomaterial was conveniently synthesized with zeolite-imidazole framework (ZIF-8) carbonization using the silica-template method and carbon nanotube (CNT) growth. The addition of an iron source endows the porous mFeNC-CNT with Fe-based nanoparticles and abundant atomically dispersive Fe-N x sites from its nitrogen-incorporated graphitic carbon matrix. As a result, the 3D porous structure reduces the charge transport resistance, and the iron and nitrogen codoped carbon exhibits excellent catalytic activity for oxygen reduction reaction (ORR) similar to that of commercial Pt/C. Meanwhile, the interwoven CNTs obtained under urea catalysis further shorten the ion and electron diffusion pathway. Experimental and theoretical analyses revealed that the optimized mFeNC-CNT has a high ORR activity with a half-wave potential of 0.908 V and a large open-circuit voltage (1.556 V) when applied on zinc-air batteries. This work provides a promising strategy for the rational design and facile synthesis of high-performing non-noble metal-based electrocatalysts for energy storage, conversion, and transport applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOBIOTECHNOLOGY
·
2022
·Vol. 20
·期 1
·1-15
·
IF 9.429
Huang Xiuyu,Qiu Miaojuan,Wang Tianqi,Li Binbin,Zhang Shiqiang,Zhang Tianzhi,Liu Peng,Wang Qiang,Qian Zhi Rong,Zhu Chengming,Wu Meiying,Zhao Jing
Background Ovarian cancer is the most lethal gynecological cancer which is characterized by extensive peritoneal implantation metastasis and malignant ascites. Despite advances in diagnosis and treatment in recent years, the five-year survival rate is only 25–30%. Therefore, developing multifunctional nanomedicine with abilities of promoting apoptosis and inhibiting migration on tumor cells would be a promising strategy to improve the antitumor effect.Methods and resultsIn this study, we developed a novel ACaT nanomedicine composed of alendronate, calcium ions and cyclin-dependent kinase 7 (CDK7) inhibitor THZ1. With the average size of 164 nm and zeta potential of 12.4 mV, the spherical ACaT nanoparticles were selectively internalized by tumor cells and effectively accumulated in the tumor site. Results of RNA-sequencing and in vitro experiments showed that ACaT promoted tumor cell apoptosis and inhibited tumor cell migration by arresting the cell cycle, increasing ROS and affecting calcium homeostasis. Weekly intraperitoneally administered of ACaT for 8 cycles significantly inhibited the growth of tumor and prolonged the survival of intraperitoneal xenograft mice.Conclusion In summary, this study presents a new self-assembly nanomedicine with favorable tumor targeting, antitumor activity and good biocompatibility, providing a novel therapeutic strategy for advanced ovarian cancer.Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Biomass Conversion and Biorefinery
·
2022
·
IF 4.05
Shang Xian-chao,Zhang Yu-qin,Zheng Yan-fen,Li Yiqiang
Polyphenols and flavonoids are abundant in spent onion skins (SOSs), being present in amounts are 2–sixfold greater times of than those in the inner bulb. In this study, an eco-friendly and efficient extraction method based on temperature-responsive deep eutectic solvents (TRDESs) was used to obtain natural flavonoids from SOSs. Microwave-assisted extraction yields of quercetin, kaempferol, luteolin, and quercetin-3-O-β-D-glucoside were evaluated to determine the efficiencies of a series of TRDESs. An extraction system composed of ethanolamine and m -cresol at ratio of 1:1 (20% water in TRDES system) was found to possess the highest efficiency. The extraction conditions were screened and optimized for efficiency using a Box-Behnken design. As a result, an extraction power of 554 W, extraction temperature of 76 °C, extraction time of 16 min, and solid–liquid ratio of 14 mg/mL were determined to be the optimal conditions. Under these extraction conditions, the total flavonoid extraction yields reached 47.83 ± 0.21 mg/g. The macroporous resin HPD 600 was selected for the separation and recovery of the TRDESs extraction mixture and the experimental measurements revealed that it allowed recovery rate more than 90%. In vitro activity testing of the flavonoid extract demonstrated excellent FRAP assay, DPPH assay and ABTS assay results for the SOSs extract prepared using a TRDES, and its inhibitory effects on S. aureus , E. carotovora , and B. subtilis were marked.
✓ 已验证
产品关联
DOI
高影响因子