SENSORS
·
2023
·Vol. 23
·期 7
·3508
·
IF 3.9
Linlin Zhuang,Qiannan You,Xue Su,Zhimin Chang,Mingfeng Ge,Qian Mei,Li Yang,Wenfei Dong,Li Li
Exosomes derived from cancer cells have been recognized as a promising biomarker for minimally invasive liquid biopsy. Herein, a novel sandwich-type biosensor was fabricated for highly sensitive detection of exosomes. Amino-functionalized Fe3O4nanoparticles were synthesized as a sensing interface with a large surface area and rapid enrichment capacity, while two-dimensional MXene nanosheets were used as signal amplifiers with excellent electrical properties. Specifically, CD63 aptamer attached Fe3O4nanoprobes capture the target exosomes. MXene nanosheets modified with epithelial cell adhesion molecule (EpCAM) aptamer were tethered on the electrode surface to enhance the quantification of exosomes captured with the detection of remaining protein sites. With such a design, the proposed biosensor showed a wide linear range from 102particles μL−1to 107particles μL−1for sensing 4T1 exosomes, with a low detection limit of 43 particles μL−1. In addition, this sensing platform can determine four different tumor cell types (4T1, Hela, HepG2, and A549) using surface proteins corresponding to aptamers 1 and 2 (CD63 and EpCAM) and showcases good specificity in serum samples. These preliminary results demonstrate the feasibility of establishing a sensitive, accurate, and inexpensive electrochemical sensor for detecting exosome concentrations and species. Moreover, they provide a significant reference for exosome applications in clinical settings, such as liquid biopsy and early cancer diagnosis.Keywords:exosomes;Ti3C2MXene;magnetic nanoparticles;electrochemical biosensor;synergistic amplification
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Energy Storage
·
2023
·
IF 9.4
Zhongtai Lin,Xue Li,Shengnan Li,Bin Li,Jianxu Ding,Yongqin Han,Tingxi Li,Chunping Hou,Yong Ma
Layered double hydroxide (LDH) has become one of the prospective electrode materials due to high specific area, good cycle stability and high power density. However, large internal resistance limits its application in energy storage. The introduction of materials with high electrical conductivity is expected to solve this problem. In here, carbon cloth/MXene/PANI/CoNi-LDH (CC/MXPACN) composites are fabricated by the electrodeposition of PANI and CoNi-LDH on the CC coated with MXene . The effects of electrodeposition time on the electrochemical performances are investigated in detail. The asymmetric supercapacitor is assembled with CC/MXPACN as the positive electrode and activated carbon (AC) as the negative electrode . The device has a 1.6 V voltage window. After 10,000 cycles at a current density of 5 A g −1 , the capacitance retention rate is still 91 %. At the power density of 399.95 W kg −1 , the energy density of 39.33 Wh kg −1 is provided. Even at the high power density of 2400.35 W kg −1 , the energy density can still reach 27.27 Wh kg −1 . The asymmetric device has high specific capacitance, long-term stability and good power density and energy density, which exhibit a huge potential in energy storage applications .
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2023
·
IF 4.5
Xinyue Guo,Ying Zhang,Hongjian Ge,Jia Zhang,Pengqi Yang,Zhengyan Wu
Lead ion (Pb 2+ ) is a significant environmental pollutant and severely harmed human health. Therefore, a direct and real-time detection for trace levels of Pb 2+ appear to be particularly important in environmental waters. In this work, we developed a portable electrochemical Pb 2+ sensor based on 2D MXene loading Co-doped Prussian blue, and CoPB-MXene/GCE exhibited a wide linear range of 1 to 200 nM and an ultralow detection limit of 0.97 nM under the low deposition potential of − 1.3 V (vs. Ag/AgCl). In addition, we investigated the various operating conditions, such as deposition time, buffer solution, and pH. Under the optimal conditions, the CoPB-MXene/GCE showed a high anti-interference, a good repeatability, an excellent reproducibility. Even more, CoPB-MXene/GCE still remains 89.23% of initial response current after four weeks, and exhibited an outstanding accuracy in real samples of bottle water, tap water, and lake water for Pb 2+ detection, which indicated the CoPB-MXene/GCE possessed an enormous potential for Pb 2+ detection in practical applications.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2025
·Vol. 192
·期 4
·1-12
·
IF 5.3
Li Lin,Liu Lanlan,Zhou Jianmei,Gu Chen,Wu Xiongzhi,Lei Chenghong,Yan Liqiang
A simple and rapid electrochemical method based on a composite of cadmium telluride quantum dots (CdTe QDs) and MXene is developed for the simultaneous determination of rutin and quercetin in food samples. The CdTe QD-MXene composite is synthesized via the in situ growth of CdTe QDs on MXene, which serves as a carrier and enhances electrical conductivity. Incorporating CdTe QDs into MXene interlayers effectively prevents agglomeration in MXene and provides more active sites for electrochemical determination. The developed electrochemical method can successfully determine rutin and quercetin, both individually and simultaneously, in aqueous solutions while achieving high stability and selectivity. Notably, the prepared sensor exhibits limits of detection of 3.300 × 10 −8 and 3.268 × 10 −7 M for the simultaneous determination of rutin and quercetin, respectively. Moreover, the sensing platform is used for the determination of rutin in buckwheat, locust rice, and apples, with results well comparable to those obtained using ultraviolet spectroscopy. Finally, the proposed sensor is employed to monitor the hydrolysis of rutin into quercetin in buckwheat using an electrochemical method for the first time. This study provides new ideas for the application of electrochemical sensors in food and drug science. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2024
·Vol. 12
·期 11
·6329-6340
·
IF 10.7
Bingjie Wen,Nizao Kong,Min Huang,Liqin Fu,Yexin Tian,Zhixiao Liu,Zhongchao Wang,Lezhi Yang,Fei Han
A single two-dimensional material often struggles to satisfy all the performance requirements of electrode materials for sodium-ion batteries. However, constructing a hierarchical heterogeneous two-dimensional stacking structure can effectively combine the advantages of multiple materials and make up for the insufficiency of a single element. This work applied a pre-intercalation–sulphuration concept and liquid-phase coating modification by constructing a hierarchical nano-flake/micro-lamellar complex structure. In this composite material, MoS2 nanosheets and V2C MXene layers overlap and interact to prevent nanoparticle agglomeration and micron flakes collapse simultaneously. The MoS2/MXene hierarchical structure is sandwiched between ultrathin and dense carbon layers to form a multifaceted conductive skeleton and a twofold protection mechanism. The coating reduces the electrolyte contact area and prevents the escape of polysulfide byproducts. Accordingly, the designed MSVC@C demonstrates superior Na+ storage capacities (612.4 mA h g−1 at 0.5 A g−1 after 600 cycles) and outstanding rate performance (304.42 mA h g−1 at 10 A g−1). Experimental results and theoretical calculations verify that the MoS2 and V2C heterostructure promotes the electrochemical performance owing to the better electronic conductivity and lower ion diffusion energy barrier. Moreover, this structure optimization strategy applies to various MXene guests (e.g., V2C and Nb2C) to prepare a variety of hierarchical nano–micro structures that are expected to be promising two-dimensional electrode materials for SIBs with application prospects in the future.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Xiaoyu Zhang,Jianming Xu,Zhiwen Chen,Guanyao Zhu,Aixiang Wei,Dihu Chen
Since wearable pressure sensors have promising applications in the fields of human physiological signal detection and bionic robots, there is an urgent need for wearable pressure sensors with comprehensive attributes such as high sensitivity and wide detection range. Here, we introduce a facile electrospinning process to fabricate a film composed of thermoplastic polyurethane/carboxyl multiwalled carbon nanotube/V 2 CT X -MXene (TPU/c-MWCNTs/V 2 C). This film has high sensitivity and great linearity, designed for flexible piezoresistive sensors. To further enhance sensor performance, we applied a spin-coating of polydimethylsiloxane (PDMS) on the sandpaper surface to create a top substrate with intermittent spinosum structures. Additionally, a layer of TPU fibers was electrospun between the conductive film and the interdigitated electrodes. The assembled components form a flexible piezoresistive sensor with a wide detection range of 0–200 kPa, a high sensitivity of 545.2 kPa −1 , a low detection limit of 5 Pa, a short response time of 48 ms, and excellent long-term durability after 7000 loading/unloading cycles, making the piezoresistive sensor highly discriminating for detecting complex human movements. Thanks to the great sensing performance and stable structure, we conducted various demonstrations to capture human physiological signals, including signals of muscle activity and pulse. These findings indicate the potential of the designed flexible pressure sensor for applications in electronic skin and smart devices.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Yanmeng Cai,Guangyuan Zhao,Qing Yuan,Jinsheng Zhao
Layered double hydroxides (LDHs) have been recognized as prospective two-dimensional capacitive deionization (CDI) faradaic materials for Cl - capture, offering tunable interlayer distance, high anion exchange capacity, and reversible ion intercalation/deintercalation ability. However, the self-stacking tendency, poor electrical conductivity, and undesired stability of LDHs nanosheets severely impede ion migration and active sites accessibility, leading to unsatisfactory CDI performance. Herein, we present an elaborately designed three-dimensional sandwich structural composite N-doped porous carbon spheres/NiMn-layered double hydroxide/MXene (NPC/NiMn-LDH/MXene) to efficiently capture Cl - as the CDI anode. In this assembly, MXene not only ensures excellent electrical conductivity for rapid ion transfer but also serves as a robust substrate for the uniform dispersion of NiMn-LDH nanosheets. Moreover, NiMn-LDH effectively inhibits the agglomeration of MXene and provides substantial storage capacity for ion accommodation. The conductive intermedium NPC establishes interconnected conductive channels, enriching accessible charge transport pathways, resulting in an accelerated ion diffusion kinetics. Accordingly, the NPC/NiMn-LDH/MXene electrode demonstrated predominant specific capacitance (265 F g - 1 ), lower ion transfer resistance, and an optimized Cl - diffusion coefficient (7.95 × 10 -17 cm 2 s −1 ). In an asymmetrical CDI cell assembly, the NPC/NiMn-LDH/MXene//NPC cell delivered outstanding Cl - removal capacity (43.5 mg g −1 ), swift salt removal rate (12.5 mg g −1 min −1 ), efficient energy utilization (0.183 kWh kg −1 -NaCl), and remarkable cyclic adsorption/desorption stability (89.6 % retention rate). Additionally, density functional theory (DFT) calculations validated that the sandwich construction of NPC/NiMn-LDH/MXene facilitated interfacial charge transfer from NPC and MXene to NiMn-LDH, accelerated ion transfer rate, and reduced ion migration energy, resulting in accessible ion diffusion kinetics and smooth Cl - shuttle. This unique approach enriches ion transfer pathways by leveraging the distinctive structural characteristics of faradaic materials, providing valuable insights for further developments in CDI technology.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Feihong Wang,Qi Zhao,Hongpeng Li,Qiangshun Wu,Luyan Zhang,Yan Li,Liang Qiao,Ye Yuan,Jun Ma,Panpan Wang,Tianming Chen
Chlorophenolic pollutants pose serious threats to the aquatic ecosystem. Photocatalysis technology has broad prospects for decontamination. In this work, MXene-derived TiO 2 nanocomposites with mixed-crystal characteristics and oxygen vacancies (OVs) (E–TiO 2 @rGO) were successfully synthesized by atmosphere modulation. Compared with commercial TiO 2 and N 2 –TiO 2 @rGO (anatase phase), the rate constants of E–TiO 2 @rGO (0.06874 min −1 ) over 2,4,6-trichlorophenol (2,4,6-TCP) degradation increased 4 and 1.3 times, respectively. The enhanced photocatalytic performance was attributed to the co-existence of anatase and rutile phases. On the one hand, the mixed-crystal phase narrowed the band gap, broadening the light absorption range. On the other hand, it induced the generation of OVs, which has been demonstrated by DFT calculation. The presence of OVs improved the adsorption and activation of O 2 and H 2 O molecules, beneficial for the formation of active free radicals. In addition, the incorporation of rGO promoted the separation of electron-hole pairs. The Gibbs free energy of 2,4,6-TCP degradation revealed that the OVs and mixed-crystal could reduce the energy barrier of the rate-determining step, thereby boosting the dichlorination efficiency of 2,4,6-TCP. The superoxide free radical ( O 2 − ) was determined as the dominant active species. Finally, a possible mechanism of 2,4,6-TCP degradation with E–TiO 2 @rGO was clarified clearly. The proposed mixed-crystal defect engineering represents a novel strategy in the design and synthesis of photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
TRIBOLOGY INTERNATIONAL
·
2024
·
IF 6.1
Xingtao Cheng,Yi He,Siming Yan,Liping Yan,Zhiyuan Li,Shijun Xu,Kaijun Wei,Yi Fan,Quangang Chen,Wanwan Peng
Wear and erosion are common issues encountered when applying metal components in harsh marine environments. In this study, N-MX@ZnO materials were prepared by a synergistic modification of Ti 3 C 2 T x using ethylenediamine and zinc oxide quantum dots. Subsequently, the Ni-Cu/N-MX@ZnO coating was deposited onto J55 steel using pulsed electrodeposition, exhibiting excellent tribological properties. The toughness, wear, and seawater erosion behavior of the coatings were investigated. The results demonstrated that the COF value of the Ni-Cu/N-MX@ZnO coating was reduced by 48.23% and the impedance value was increased by 300% in comparison to the pure sample. The enhancement mechanism can be attributed to the physical barrier effect and uniform dispersion effect of N-MX@ZnO, which caused the Ni-Cu/N-MX@ZnO coatings to form a friction-transferring film during the friction process.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES COMMUNICATIONS
·
2024
·
IF 6.5
Yunzhongze Hu,Jiafei Gu,Yang Zhang,Gongyu Liu,Xiaosu Yi,Xiaoling Liu
Polylactic acid (PLA), a rapidly emerging bio-based plastic, faces challenges in reinforcement due to its weak mechanical properties and poor interface adhesion with carbon fibre surfaces. This study introduces an MXene/recycled carbon fibre (rCF) reinforced PLA 3D printing material, prepared through electrostatic self-assembly of MXene and recycled carbon fibre. MXene addition significantly enhances the fibre-substrate interface bonding in fibre-reinforced PLA filaments. This results in the printed parts displaying enhanced toughness, the flexural strength achieved of 105.45 MPa, modules of 5.98Gpa, and notched impact strength of 7.12 kJ/m 2 , realizing 15.6 %, 112.1 %, and 31.8 % improvements, respectively in comparison to pure PLA. Additionally, the modified PLA demonstrates absorption-dominated superior electromagnetic shielding performance. This research offers a viable approach for enhancing recycled carbon fibre-reinforced thermoplastic PLA and insights into designing sustainable, structurally, and functionally integrated composites.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Chemistry
·
2024
·
IF 6.7
Nana Tang,Yanping Wei,Quanguo He,Shuting Shi,Chuanqin Zhou,Aiting Chen,Jun Liu
A novel and facile electrochemical determination of Sertraline at nanomolar concentration using bimetallic MXene NbTiCT x and MWCNTs hybridized electrodes as sensing platforms is demonstrated. NbTiCT x /MWCNTs composites were produced by etching NbTiAlC to obtain NbTiCT x , and ultrasonically mixing this with MWCNTs. An electrochemical sensor based on NbTiCT x /MWCNTs nanocomposite modified (NbTiCT x /MWCNTs/GCE) was constructed, for use in the sensitive detection of Sertraline (SER). The successful preparation of NbTiCT x /MWCNTs and the electrochemical performance of the electrodes were verified by Scanning electron microscopy, X-ray diffraction, cyclic voltammetry and electrochemical impedance characterization methods. The experimental results show that NbTiCT x /MWCNTs/GCE can increase the SER oxidation peak current, with two good linear relationships (R 2 = 0.9910 and 0.9967) between the current and the concentration of SER (5.0–10.0 μM and 10.0–100.0 μM), with a detection limit of 0.16 μM (S/N = 3). The sensor has good selectivity, repeatability, reproducibility and stability, and enables the sensitive determination of SER in human serum and urine samples of clinical biological fluids. It is believed that this work is significant and is of broad interest for work in innovative material development and biomedical applications.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2024
·
IF 15.8
Qi Fan,Kui Xu,Minghua Chen,Qing Tang,Ke Chen,Xiaofei Hu,Fuli Lan,Yueqi Wang,Hui Shao,Sicong Qiao,Ziwei Yan,Changda Wang,Li Song,Wencheng Hu,Michael Naguib,Patrice Simon,Qing Huang,Yao Xiao,Kun Liang
Multiple van der Waals (vdW) gaps invoke abundant opportunities for contriving artificial architectures and tailoring desired properties via the intercalation route beyond the reach of conventional concepts. Intriguingly, the electrochemical intercalation strategy can precisely and reversibly tune the intercalation stage of charged functional species. This study presents a valid structural editing protocol facilitated by electrochemical intercalation to engineer MXene interlayers, ultimately incorporating in situ constructed carbon nanotube (CNT) electric bridges for enhanced ion storage and transport pathways. The method allows for the precise modulation of electrochemical forces to tailor materials for specific applications. Deep intercalation and in situ growth processes establish robust anchoring sites and connectivity hubs between MXenes and CNTs, ensuring structural homogeneity and stability in advanced electrode materials. The results demonstrate the effectiveness of electrochemistry-mediated interlayer nanoengineering in MXenes, offering a versatile approach to design vdW heterostructures with tailored functionalities for energy storage and conversion applications. This work highlights the potential of electrochemical modulation in advancing materials engineering strategies for next-generation energy storage technologies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子