文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3073至3084个,产品总数8,007个

切换升序
2′
MICROCHIMICA ACTA · 2026 ·Vol. 193 ·期 9 ·631 · IF 5.4

Synergistic “capture-and-catalysis” at a V2O3@NC/NHCS composite interface for the ultrasensitive electrochemical quantification of amaranth in complex matrices

Li Jiejun,Wang Hui,Li Xinyi,Zhao Pengcheng,Fei Junjie,Xie Yixi

Amaranth (AM) is a widely used synthetic azo food colorant that poses severe toxicological risks upon excessive consumption, creating an urgent need for its ultra-sensitive detection. We report a high-performance electrochemical sensor based on the electrostatic co-aggregation of V 2 O 3 @NC and NHCS for the high-fidelity quantification of AM. A unique “capture-and-catalysis” synergistic mechanism governs this composite interface. Specifically, the highly porous NHCS framework provides exceptional capacity to capture and pre-concentrate target molecules while acting as a highly conductive “electronic bridge.” Subsequently, the abundant mixed-valence (V 3+ /V 5+ ) sites of the V 2 O 3 @NC serve as a robust electrocatalytic engine to drive the catalysis, significantly amplifying the AM oxidation signal. Combining electrochemical kinetic analysis with DFT calculations (including HOMO and MEP), we reveal that this electrocatalytic evolution proceeds via a directional 1 H + /2e − transfer mechanism. Under optimal conditions, the V 2 O 3 @NC/NHCS sensor exhibits a broad linear range (0.01–12 µM) and an extremely low LOD of 0.80 nM. Practical analysis of commercial beverages yielded recoveries of 95.0%–104.3%, with results perfectly matching orthogonal UV-Vis cross-validation. This work provides a robust platform for azo dye screening and profound insights into the rational design of “capture-and-catalysis” composite interfaces. Graphical abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2026 · IF 18.1

Synergistic Co–Zn dual atomic sites drive C-lignin hydrogenolysis via vicinal C–O cleavage

Li Xiancheng,Xia Yuangu,Ma Yanchao,Liu Jiaxuan,Ma Yue,Wang Shuizhong,Lu Qiang,Song Guoyong

C-lignin, a natural biopolymer of caffeyl alcohol subunits linked by benzodioxane motifs, is an ideal feedstock for direct catechol production. However, its hydrogenolysis is hindered by the high bond dissociation energies and steric congestion of vicinal C–O bonds in benzodioxane structures. Here, we report a low-loaded Co–Zn dual single-atom catalyst (Co SA –Zn SA @NC) that enables efficient C-lignin hydrogenolysis, achieving 84.6% catechol yield, 82% selectivity toward 4-propylcatechol, and a turnover number five times higher than precious Ru/C, attributing to the synergistic effect of the dual atomic sites. The major product, 4-propylcatechol, can be readily purified and upgraded into diverse value-added molecules. Mechanistic investigations reveal that the Zn and Co species, acting as the directing and active centers, respectively, synergistically drive the quasi-concerted cleavage of the vicinal C–O bonds. This work presents an atomically dispersed non-precious metal catalyst for C-lignin hydrogenolysis, providing a sustainable route to well-defined aromatics.

CAS / MDL: 10026-22-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICAL SCIENCES · 2026 · IF 2

A highly sensitive electrochemical sensor based on poly(alizarin red)/gold nanoflowers/molybdenum disulfide composite for the detection of methotrexate

Wang Anqing,Jiang Xiaorui,Duan Dingding

A sensitive electrochemical sensor for the detection of methotrexate (MTX), a widely used anticancer and anti‑autoimmune drug, was constructed. MTX monitoring is of great significance for reducing toxic side effects and guaranteeing clinical medication safety. The sensor was based on a glassy carbon electrode (GCE) modified with a nanocomposite of molybdenum disulfide (MoS 2 ) nanosheets loaded with gold gold nanoflowers (AuNFs), followed by the electrochemical polymerization of alizarin red (AR) to form a stable polymeric film (PAR) on its surface. The MoS 2 nanosheets were prepared via liquid-phase exfoliation, and the AuNPs were deposited onto them via electrodeposition. The morphology of the modified electrode (PAR/Au@MoS 2 /GCE) was characterized by scanning electron microscopy (SEM), and its electrochemical properties were investigated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The synergistic effect of the nanocomposite and the conductive polymer significantly enhanced the electrocatalytic activity towards MTX oxidation. Under optimized conditions, the oxidation peak current of MTX at the modified electrode was nearly six times higher than that at a bare GCE. The sensor exhibited a linear response to MTX concentrations ranging from 0.4 to 38.6 µM, with a low detection limit of 0.027µM (S/ N  = 3). The sensor demonstrated excellent reproducibility, stability, and selectivity. Its practical applicability was successfully validated by determining MTX content in commercial tablet formulations with satisfactory recoveries. Graphical abstract A PAR/Au@MoS 2 /GCE electrochemical sensor was fabricated via sonication, electrodeposition, and electropolymerization for the sensitive detection of methotrexate.

CAS / MDL: 130-22-3 1317-33-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICAL AND BIOANALYTICAL CHEMISTRY · 2026 · IF 4.1

Engineering BiOBr/L-cysteine interface with enriched active sites for enhanced photoelectrochemical detection of trace Zn2+

Wei Ruxia,Sheng Wei,Chen Shengyu,Zheng Yiwei,Li Xu,Feng Na,Luo Yanni,Tan Xuecai,Huang Ke-Jing

The development of highly sensitive and selective platforms for trace Zn 2+ detection is crucial for environmental monitoring and biomedical diagnostics. Herein, a photoelectrochemical (PEC) sensor was constructed using an L-cysteine (L-Cys)-functionalized BiOBr composite, in which surface-interface engineering was adopted to enrich available recognition sites and modulate the interfacial PEC response. Compared with pristine BiOBr, the incorporation of L-Cys introduces abundant Zn 2+ binding functional groups and modifies the local surface environment of BiOBr, thereby enhancing the photocurrent response and enabling the selective recognition of Zn 2+ . The sensor operates through a signal-off mechanism, in which the coordination of Zn 2+ with surface-bound L-Cys forms an interfacial coordination layer that partially hinders mass transport and interfacial charge transfer, resulting in a decrease in photocurrent. Under optimized conditions, the platform exhibits a wide linear response ranging from 0.5 to 40 nmol/L, with a low detection limit of 2.69 nmol/L ( S / N  = 3). Furthermore, the applicability of the sensor is validated in real-world scenarios, demonstrating excellent recoveries in tap water, lake water, and complex biological matrices such as HepG2 cell lysates (recoveries, 96.3–108.5%). This work provides a robust strategy for engineering bio-semiconductor interfaces for the detection of essential metal ions in complicated samples.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2026 ·Vol. 37 ·期 19 ·1466 · IF 3.2

Synthesis and characterization of mesoporous titanium-based MOFs as advanced n-butanol gas sensor applications

Valabhoju Madhuker,Pothukanuri Nagaraju,Kathirvelu Velavan,Parne Saidi Reddy

Titanium-based metal–organic frameworks (Ti-BDC MOFs) were synthesized via a solvothermal route at different temperatures ranging from 110 to 170 °C using terephthalic acid as the organic linker. The synthesized samples were systematically characterized using X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–Vis), Brunauer–Emmett–Teller (BET) surface area analysis, and thermogravimetric analysis (TGA) to investigate their structural, morphological, optical, and thermal properties. X-ray diffraction (XRD) studies revealed temperature-dependent variations in crystallinity and phase evolution, while FESEM analysis demonstrated significant morphological transformations with increasing synthesis temperature. EDX confirmed the presence of Ti, O, and C elements, validating the successful formation of the Ti-BDC framework. FTIR spectra verified the coordination between Ti metal centers and BDC linkers, whereas TGA indicated good thermal stability with framework integrity maintained up to approximately 280 °C. Ultraviolet–visible studies were employed to determine the optical band gap, and BET analysis revealed the microporous and hierarchical porous nature of the synthesized materials. Gas sensing characteristics toward n-butanol were evaluated under ambient conditions using the static liquid distribution method. Among all samples, the Ti-BDC MOF synthesized at 150 °C exhibited the best sensing performance toward 5 ppm n-butanol, showing superior response–recovery behavior, excellent selectivity, and long-term stability, with a limit of detection (LOD) of 2.66 ppm. The enhanced sensing performance is attributed to the optimized crystallinity, porous architecture, and abundant active adsorption sites that facilitate efficient gas diffusion and charge transfer processes. These findings demonstrate the potential of Ti-BDC MOFs as promising sensing materials for low-concentration n-butanol detection in environmental monitoring and workplace safety applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2026 · IF 4.4

Synergistically robust, superhydrophobic, and stereo-complexed poly(lactic acid)/ZnO porous composite membranes via a hierarchical crystallization strategy

Yang Shengdu,Meng Yuchan,Chen Ding,Sun Xin,Zhao Xiaohai

Stereo-complexed poly(lactic acid) (PLA) membranes are highly attractive for sustainable applications, yet achieving a synergy between mechanical strength and superhydrophobicity remains a significant challenge. Herein, a hierarchical crystallization strategy was developed to fabricate high-performance stereo-complexed PLLA/PDLA/ZnO porous composite membranes by integrating methacryloxypropyltrimethoxysilane (MPS)-modified ZnO nanoparticles (NPs). By optimizing the MPS-ZnO content within a 9:1 PLLA/PDLA blending matrix, a remarkable 182% increase in tensile strength (from 2.14 to 6.05 MPa) was achieved, while simultaneously attaining stable superhydrophobicity with a water contact angle of 155.4°. Both differential scanning calorimetry (DSC) and X-ray diffraction (XRD) results revealed that MPS-ZnO NPs function as efficient heterogeneous nucleating agents, significantly enhancing stereo-complex (SC) crystallization. Crucially, a “dual-directional traction force” was proposed as a possible mechanism at the molecular level, i.e., the concurrent growth of SC and HC (homo-crystallization) phases induces a confined, oriented crystalline state in the intermediate polymer chains. This unique structure assumption effectively establishes potential correlations in the connection between varying crystalline phases. Furthermore, the composite membranes displayed improved thermal insulation, with thermal conductivity decreasing to 0.055.6 W m −1  K −1 due to enhanced phonon scattering at the complex hierarchical interfaces. This work provides a versatile approach for designing biodegradable functional membranes with superior structural integrity and tailored surface properties for advanced filtration and insulation. Graphical

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2026 · IF 4.4

Synergistic temperature and sulfur doping engineering of MOF‑derived Co‑N‑C catalysts for high‑performance zinc‑air batteries

Hu Qing,Wu Haiyi,Shi Ling,Yao Zhenhua,Jin Fang,Hu Maocong

This study investigates the synergistic effects of pyrolysis temperature and sulfur doping on the structure and oxygen reduction reaction (ORR) performance of cobalt-based catalysts derived from metal–organic frameworks. Using thiourea as the sulfur source, a series of Co-NSC catalysts were synthesized at different temperatures (750–1050 °C). The results demonstrate that sulfur doping effectively inhibits metal agglomeration by forming Co–S coordination bonds, while an optimal pyrolysis temperature (850 °C) balances defect density, pore structure, and active-site distribution. Among all samples, Co-NSC-850 exhibits favorable ORR activity in alkaline medium, with a half-wave potential of 0.852 V, an electron transfer number close to 4, and H 2 O 2 selectivity below 5%. When applied in zinc-air batteries, Co-NSC-850 delivers a power density of 254.22 mW cm −2 , a small charge–discharge gap (1.02 V), a specific capacity of 809.18 mAh g −1 , and a cycle life of 220 h, comparable to or better than commercial Pt/C. This work provides valuable insights for designing high-performance non-noble metal ORR catalysts through cooperative regulation of temperature and heteroatom doping. Graphical abstract

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COLLOID AND POLYMER SCIENCE · 2026 · IF 2.9

Superhydrophobic cotton fabric decorated with the coatings of double hydrophobic star-shaped copolymer and PDMS for oil-water separation

Li Xin,Yu Shengming,Zhao Cailing,Song Kun,Jiang Yan,Zhang Hongwen

Owing to the numerous hazards associated with oily wastewater, superhydrophobic materials desirable for oil-water separation have attracted considerable attention. Herein, a double hydrophobic polyhedral oligomeric silsesquioxane-polystyrene (POSS-(PS) 8 ) star-shaped copolymer was synthesized by atom transfer radical polymerization (ATRP). The superhydrophobic coating for oil-water separation was prepared by PDMS anchoring POSS-(PS) 8 on the surface of cotton fabric (CF) through nonsolvent induced assembly. The influence of POSS-(PS) 8 and PDMS solution concentration on the optical properties and durability of result superhydrophobic coating were evaluated. Notably, the optimal PDMS dosage endows the superhydrophobic coating with both high optical transmittance (88.4 ± 0.3%) and high haze (87.6 ± 0.6%). Furthermore, the superhydrophobic cotton fabric (SCF) was investigated revealing it has the ability to efficiently separate various oil-water mixtures due to its superhydrophobicity, and maintain good separation efficiency even after 30 cycles. This work will provide a feasible strategy for potential application of the low cost and environmentally friendly SCF in oil-water separation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Food Measurement and Characterization · 2026 · IF 3.6

Development and optimization of composite deodorization method for shrimp meat using β-cyclodextrin and non-Saccharomyces yeast

Luo Jia-wei,Xiao Shan,Chen Xuan,Zeng Pu-sheng,Gao Ning,Wang Ji-hui

In this study, a composite deodorization method combining β-cyclodextrin (β-CD) and Hanseniaspora opuntiae was developed to eliminate the fishy odor in shrimp meat. The deodorization process was optimized using one-way and response surface methodologies, with optimal conditions of 8.3% β-CD, 7.27% Hanseniaspora opuntiae , 82.75 min of deodorization time, and a temperature of 29.42 °C. Under these conditions, trimethylamine, the primary contributor to the fishy odor, was reduced to 11.22 mg/kg. Comparative analysis of physical deodorization (PT), microbial deodorization (MT), and combined deodorization (MxT) showed that MxT was the most effective. The MxT method reduced the relative signals of several fishy odor-related volatiles, including aldehydes, ketones, and sulfur-containing compounds, while enhancing fruity and floral aroma-related volatiles. Furthermore, sensory analysis revealed improvements in umami, richness, and freshness, along with reductions in bitterness and astringency. Electronic tongue, partial least squares discriminant analysis, and correlation analysis confirmed significant relationships between free amino acids, volatile compounds, and sensory attributes, further validating the effectiveness of MxT. Overall, the β-CD– Hanseniaspora opuntiae method not only reduced fishy odors but also improved the overall quality and sensory characteristics of shrimp meat, offering potential for high-quality shrimp product development and seafood processing. Graphical The alternative text for this image may have been generated using AI.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CATALYSIS LETTERS · 2026 ·Vol. 156 ·期 7 ·191 · IF 2.5

Probing the Synergistic Effects of Au, Pd and CeO2 Facilitating the Au-Pd/CeO2-Catalyzed Selective Oxidation of 1,2-Propanediol to Lactic Acid

Liu Yubing,Tang Jie,Cai Chenyu,Gu Runjing,Yang Xinyu,Yue Liang,Bai Yiqiang,Zhang Fengxiao,Liang Jing,Xu Naizhang,Fan Yining

CeO 2 -supported Au and Pd nanocatalyst (Au-Pd/CeO 2 ) was developed and used in the oxidation of 1,2-propanediol (1,2-PDO). Notably, by tuning catalyst composition and reaction conditions, the product selectivity could be well controlled to produce lactic acid (LA) majorly, which was one of the top twelve bio-based platform molecules with very broad application scopes. The catalyst with Pd/(Au + Pd) molar ratio at 0.25 should be the preferable catalyst was screened out to be preferable, affording LA in 92.0% selectivity, while 88.0% of 1,2-PDO was converted under mild reaction conditions (0.3 MPa of O 2 at 80 °C for 3 h). The superior catalytic activities of Au-Pd/CeO 2 probably attributed to the strong interactions between Au and Pd nano particles (NPs), as being reflected by High resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectra (XPS) characterizations. Moreover, strong interactions between Au and Pd NPs making it easy to generate active oxygen species. Superoxide radicals can oxide the first hydroxyl group of 1,2-PDO to carboxyl group, while H 2 O 2 can easy caused C-C bond breaks and generate unwanted by-products. Graphical The alternative text for this image may have been generated using AI.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF APPLIED ELECTROCHEMISTRY · 2026 ·Vol. 56 ·期 7 ·143 · IF 3.7

The manganese-cadmium sulfide catalyzed silicon composite photocathode for water splitting

Cheng Xiaorong,Ji Tong,Chen Jingtian,Chang Qingran,Yuan Tianyang,Han Yuxuan,Hu Yemin,Cai Huimin,Dawson Graham

This work reported a novel composite photocathode consisting of Mn 0.2 Cd 0.8 S (MCS) deposited on pyramid-textured silicon for efficient solar hydrogen evolution. The MCS layer was synthesized via a hydrothermal route and deposited onto pyramid-textured silicon by a simple drop-coating method. The optimized Si/MCS-3 (3 drop-coating times) photocathode demonstrated a remarkable photocurrent density of −16.20 mA cm −2 at −0.80 V NHE , which was 33 times higher than that of bare silicon, along with a positively shifted onset potential (0.19 V NHE ). Enhanced performance was attributed to improved light harvesting, favorable band alignment, and efficient charge separation at the Si/MCS interface. Furthermore, the MCS coating served as a protective layer, ensuring excellent stability over 60 h of continuous hydrogen evolution reaction (HER). Graphical abstract The alternative text for this image may have been generated using AI. The optimized Si/MCS-3 (3 drop-coating times) photocathode demonstrated a remarkable photocurrent density of -16.20 mA cm-2 at -0.80 VNHE, which was 33 times higher than that of bare silicon, along with a positively shifted onset potential (0.19 VNHE).

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2026 · IF 18.1

Breaking the activity-selectivity trade-off in Fenton-like catalysis by d-orbital modulation of single-atom sites within a nano-island-like structure

Chen Yuxin,Xu Xing,Zeng Jianrong,Yu Yang,Ma Yingshuai,Zhang Peilin,Zeng Tao,Zhang Haiguang,Tang Liang,Liu Runzeng,Zhu Youcai

Direct electron transfer (ETP) during peroxymonosulfate (PMS) activation enables selective, matrix-resistant organic contaminants oxidation, yet its precise control over competing radical pathways remains elusive. Here we report a nano-island-like single-atom catalyst- carbon nitride islands immobilize cobalt single atoms on reduced graphene oxide (CoN 3 C/rGO)- that leverages an island-sea architecture to direct PMS activation toward ETP. Experimental and density functional theory (DFT) analyses show an rGO induced elevation of the Co d -band center and a sharpened d z2 orbital near the Fermi level, promoting directional hybridization with PMS p orbitals and suppressing antibonding occupation. Consequently, CoN 3 C/rGO/PMS degrade bisphenol A (BPA) completely within 5 min, with ~94% contribution from ETP. Furthermore, catalytic membrane coatings enable stable 100 h continuous operation in diverse real water matrices with minimal Co leaching. Our results demonstrate a design principle-orbital-level modulation via island-sea architectures to reconcile activity and selectivity in Fenton-like systems and advance translating practical water treatment technologies based on single-atom electronic control.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。