Inorganic Chemistry Frontiers
·
2026
·
IF 6.2
Meng Wang,Yuyin Mao,Xiangdong Xue,Yucheng Dong,Xinjiao Cao,Qing Dong,Weiqiang Tan,Jian Liu
The electrocatalytic nitrate reduction reaction (NitrRR) to ammonia offers a sustainable approach for wastewater treatment and value-added chemical synthesis. However, its practical application is hindered by sluggish kinetics and low selectivity, stemming from complex proton–electron transfer processes. Herein, we report an in situ electrochemical reconstruction strategy to construct a CuOx–BTA heterojunction catalyst, where CuOx species are controllably derived from a Cu-based metal–organic framework (Cu–BTA) precursor. The engineered interface induces strong interfacial charge transfer from CuOx to BTA, promoting electron localization on Cu active sites and optimizing the adsorption energy of key intermediates. These structural and electronic features establish a dual-functional synergy: Cu0 sites catalyze the critical conversion of NO3− to NO2−, while Cu+ sites facilitate the subsequent reduction of NO2− to NH3. Meanwhile, the BTA ligand enhances NO3− activation and water dissociation, providing abundant *H intermediates for NH3 formation. Benefiting from this cooperative mechanism, the catalyst achieves a remarkable NH3 faradaic efficiency of 99.2% at −0.68 V vs. RHE and maintains stable performance for over 100 hours, significantly outperforming individual components (Cu–BTA, CuNPs and Cu2O). This study demonstrates the potential of electrochemical reconstruction-driven interface engineering for the rational design of high-performance cascade NitrRR catalysts.
✓ 已验证
产品关联
DOI
高影响因子
EUROPEAN POLYMER JOURNAL
·
2026
·
IF 6.8
Haixue Li,Meng Yan,Lisha Yin,Licui Zhang,Dongmei Li,Zhiyong Liu,Fangling Li,Zhongpeng Qiu,Lin Cui
Traditional wound dressings frequently exhibit issues such as inadequate adhesion to irregular wound surfaces, a tendency to induce secondary tissue damage, and limited multifunctionality, posing significant challenges in clinical practice. This study presents a novel injectable hydrogel dressing (CMCS/ODEX/TA/HNTs) that integrates multiple mechanisms, thereby imparting superior hemostatic, antioxidant and antibacterial properties. CMCS and ODEX form a reversible three-dimensional network via a rapid Schiff base reaction. Upon injection, these materials can rapidly gelatinize in situ, adaptively filling the cavities of complex wounds. TA serves as a multifunctional crosslinking agent, significantly enhancing the hydrogel’s mechanical strength, self-healing properties, antioxidant capacity, and broad-spectrum antibacterial activity through robust hydrogen bonds and covalent interactions. A crucial aspect of this enhancement is the incorporation of halloysite nanotubes (HNTs). By leveraging their excellent dispersibility in both the aqueous phase and polymer matrix, along with their unique tubular structure and high specific surface area, HNTs not only improve tissue adhesion and mechanical integrity but also promote platelet aggregation, facilitate the sustained release of bioactive factors, and markedly enhance the hemostatic effect. In vivo experiments on rat tail cut off and liver injury models have revealed that the hemostatic efficacy of CMCS/ODEX/TA/HNTs hydrogel surpasses that of commercial hemostatic sponges, ensuring swift hemostasis. In vitro studies have showcased its substantial antibacterial capabilities, while animal trials have further validated its superior hemostatic performance compared to conventional sponges. The synergistic combination of its multifunctional attributes, encompassing antibacterial, antioxidant, and highly effective hemostatic properties, presents a promising approach for managing wound infections. Particularly suited for challenging emergency scenarios, this hydrogel holds significant promise for clinical translation.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Mengfei Mao,Yaoqi Zhang,Yingying Dong,Wanfeng Wu,Nannan Dong,Yizhou Xiang,Hongfei Zhang,Xingyu Lin,Li Li
Viscous food adhesion to packaging causes severe resource waste, while conventional wax–based hydrophobic coatings are restricted by poor structural stability. Herein, we developed an antiadhesion coating (AC) with both excellent liquid repellency and strong substrate adhesion. The coating’s hierarchical micro–/nanostructure was optimized by incorporating behenic acid (BA) with dual-sized silica nanoparticles (SiO 2 NPs), while zein served as a bio–based adhesive to enhance binding to substrates. At an optimal formulation, the AC achieved a water contact angle of 136.60 ± 1.53° and a sliding angle of 13.51 ± 0.62°. In practical tests with viscous food products—yogurt, oyster sauce, and honey—the AC showed nearly no residue, compared to residual amounts of 11%, 15%, and 27%, respectively, on uncoated surfaces. To further elucidate the antiadhesion mechanism at the molecular level, molecular dynamics (MD) simulations were performed using yogurt as a model system. The results reveal that the AC disrupts the conformational stability of adsorbed proteins such as β–lactoglobulin and significantly enhances interfacial water diffusion, with a vertical diffusion coefficient ten times greater than the control surface. This study presents a sustainable strategy for antiadhesion food packaging and provides new molecular–level insights into the interactions between hydrophobic surfaces and viscous liquid food.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Wang Xihao,Huang Jingting,Kong Chuipin,Li Peiyan,Wang Kaixin,Zhuang Yijia,Li Sijie,Wang Li,Zhang Boqing,Li Zhengyong,Zhou Changchun
Diabetic wound healingAC: remains challenging due to persistent inflammation, oxidative stress, and impaired macrophage polarization. Herein, a multifunctional hydrogel dressing was constructed from carboxymethyl chitosan and oxidized dextran as the dynamic network, incorporating CeO2 nanozymes for early anti-inflammatory and antioxidant effects and PLGA microspheres loaded with astragaloside IV for sustained pro-regeneration. Via Schiff base crosslinking, this hydrogel self-assembled rapidly at room temperature and adhered tightly to tissue. In vitro, the hydrogel exhibited excellent biocompatibility, potent antioxidant and anti-inflammatory activities, and promoted endothelial cell migration and angiogenesis. In a diabetic rat full-thickness wound model, this hydrogel dressing effectively reduced local inflammation, drove macrophage polarization toward the M2 phenotype, and enhanced neovascularization to accelerate wound closure. RNA sequencing further revealed that inflammatory pathways, including TNF and IL-17 signaling, were suppressed while tissue regeneration programs were activated. This stepwise therapeutic strategy offers a promising alternative for diabetic wound repair.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2026
·
IF 7.3
Wang Nan,Su Xiaoyan,Nie Yuan,Dou Huashuo,Wang Jiaxi,Rui Minglang,Liu Yueying
Most studies focus on improving the
activity of nanozymes to build
a nanozyme-based “chemical tongue” for the sensitive
discrimination of multiple analytes. However, the construction of
sensing units with multidimensional signals is often overlooked, which
greatly limits the ultrasensitive identification of antibiotics and
even their subtypes. Herein, we have for the first time designed the
high performance of a “chemical tongue” by integrating
high peroxidase (POD)-like activity Prussian blue analogues (PBAs)
with multidimensional information from multiple oxidation products
of 3,3 ′ ,5,5 ′ -tetramethylbenzidine (TMB) as sensing units.
Initially, the bimetallic PBA with boosted POD-like activity is achieved
via combining FeRu metal doping with an acid-etching morphological
reconstruction strategy. More importantly, the catalytic activity
for this hollow-structure nanozyme with a specific activity of 73.3
U/mg is increased by approximately 10 times compared to the pristine
Prussian blue (PB) through the synergistic reconstruction of redox
couples and exposure of more active sites. And then, the one-electron,
one/two-electron, and two-electron oxidation products of TMB are achieved
by rationally controlling the concentration of the nanozyme, yielding
three chromogenic products as three sensing units with six-wavelength
channels. Therefore, the developed array is successfully applied to
the ultrasensitive detection of seven antibiotics with down to 0.1
μM and even the discrimination of three subtypes including aminoglycosides,
penicillins, and tetracyclines. The sensing mechanism depends on the
variable inhibition efficiency of multiple antibiotics on the nanozyme
catalytic activity. Furthermore, it enables identification of molar
ratios in binary mixtures and also exhibits quantitative analysis
of individual antibiotics over a broad concentration range from 0.1
to 200 μM. Moreover, with the assistance of optimizing various
machine learning, the concentration-independent recognition model
is built against this array, which enormously improves the discrimination
accuracy of seven antibiotics from 73.03% by Decision Tree (DT) to
96.63% by the Gaussian Process Classification (GPC) algorithm. The
outstanding discrimination capability of this array enables accurate
identification of seven antibiotics in three real food samples (honey,
milk, and chicken breast). This study provides a new perspective for
configuring high-feature sensor arrays in the application of food
and environmental samples.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Sustainable Metallurgy
·
2026
·
IF 3.5
Wang Yan,Deng Tengfei
In this study, different concentrations of Fe 3 O 4 were introduced to modify chromium-containing sludge, and conventional solid-phase sintering was employed to concentrate chromium (Cr) element into the chromite spinel phase, thereby immobilizing the chromium in the sludge. A series of synthesized samples were characterized using X-ray diffraction, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, as well as dielectric and magnetic property measurements. The results showed that all samples contained three phases: spinel, phosphate, and amorphous. When the Fe/Cr ratio in the spinel phase exceeded 1.9/1.1, the samples exhibited significant magnetism. Subsequently, the effects of microwave irradiation on the liberation behavior of the spinel phase, as well as on the microstructure and mechanical properties of the ceramic samples, were systematically investigated. Scanning electron microscopy (SEM) analysis revealed that microcracks appeared in the microwave-treated ceramic samples, which was attributed to the selective heating characteristics of microwaves and the differential thermal expansion among different phases. Moreover, as microwave irradiation time increased, the crack density and the degree of sample damage also increased. The product obtained by magnetic separation of the sample irradiated with microwaves for 7 min had a spinel content of 89.19 wt%. The magnetic separation experiments indicated that the separation efficiency was improved due to the intergranular cracks generated by microwave treatment. Graphical
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Xia Shuai,Tan Hao,Zhang Jianfang,Han Miao,Xu Chang,Yu Cuiping,Chen Kui,Zhang Yong,Wu Yucheng,Wang Yan
The electrocatalytic synthesis of amides from abundant small molecules offers a sustainable route for green chemical production, yet faces fundamental challenges due to kinetic competition between C–C and C–N bond formation. Here we show an atomically engineered dual-site catalyst featuring nickel single atoms adjacent to copper nanoclusters (Ni-SA/Cu-NCs) on a nitrogen-doped carbon matrix for efficient CO 2 and NO 3 − co-reduction to acetamide. This architecture enables complementary functions, with Ni sites selectively converting CO 2 to CO and neighboring Cu nanoclusters promoting C–C coupling to form the *CCO intermediate while concurrently reducing NO 3 − to form the *NH 2 intermediate. The resulting synergy facilitates rapid intermediate transfer and C–N coupling, delivering an acetamide yield rate of 257.3 mmol h −1 g cat . −1 at an industrial current density of 215.7 mA cm −2 , with stable operation over 160 h. In situ spectroscopic studies and theoretical calculations suggest that strong Ni–Cu electronic coupling promotes reactant adsorption and reduces the activation barriers for critical steps, including *CO dimerization and *CCO–*NH 2 coupling. This work provides an atomic-level design strategy for multi-site catalysts to steer complex electrocatalytic reactions toward value-added products.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Neuroinflammation
·
2026
·Vol. 23
·期 1
·90
·
IF 11.5
Tang Fenglin,Li Yufeng,Bai Xue,Zhu Zhongmou,Dong Hongwei,Chen Jianhui,Ye Bo,Yuan Meng,Wu Qilong,Fu Weishan,Zhang Yuan,Wang Chao
Alzheimer’s disease (AD) is the most common neurodegenerative disorder, with circadian rhythm disturbances strongly linked to its pathogenesis. The choroid plexus (ChP) is a circadian-regulated structure in the brain ventricles, but the role of the core clock gene brain and muscle ARNT-like protein 1 ( BMAL1 ) in ChP in relation to AD pathology remains unclear. Here, we report that knockdown of Bmal1 in ChP epithelial cells of 5xFAD mice alleviates amyloid-β (Aβ) pathology, primarily by improving the function of astrocytes and border-associated macrophages (BAMs), with the latter potentially mediated by the upregulation of the secreted protein glutathione peroxidase 3 (GPX3), which reduces lipid peroxidation in BAMs. Collectively, our findings establish the ChP-driven BMAL1-GPX3 axis as a new Aβ clearance mechanism, with GPX3 representing a promising therapeutic target. These findings provide new mechanistic insights into AD and suggest innovative treatment approaches.
✓ 已验证
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Huan Yang,Hengtian Zhu,Wenyu Teng,Heyu Huang,Zuoxiu Tie,Zixu Li,Zhenning Qi,Songtao Yuan,Zizhong Hu,Fei Xu
Precise intraocular pressure (IOP) management and rapid intervention preserve glaucoma vision, yet current ocular delivery systems lack in situ dosage verification, causing treatment blind spots. Here, we develop a wireless therapeutic smart contact lens (SCL) containing a rapid voltage-triggered drug delivery system with a real-time dosage monitoring sensor. The e-interwoven design integrates drug delivery and sensing electrodes in an ultra-thin (17.4 µm) tri-interdigital configuration, which enables the electric field to interact with the drug-loaded hydrogel in the same spatial region. A frequency-matching strategy boosts voltage coupling to drive a brimonidine tartrate-loaded hydrogel to achieve high concentrations in the aqueous humor in 20 min, significantly faster than topical eye drops. The built-in drug dose sensor has a high accuracy <2.8 µg, benefiting from the great linear correlation between wireless frequency drift and release dosage. In acute glaucoma rabbit models, this SCL suppresses peak IOP elevation by 85.7% compared to eye drops. This SCL presents a highly integrated therapeutic platform demonstrating potential for rapid and precise glaucoma treatment.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Healthcare Materials
·
2026
·
IF 11
Zihao Zhu,Zuping Xiong,Kexin Chen,Xianchi Zhou,Wenzhong Cao,Yu Yan,Bo Yu,Fan Jia,Haoke Zhang,Youxiang Wang,Jian Ji,Peng Zhang
Zwitterionic hydrogels have attracted considerable attention for protein stabilization, cell encapsulation, and therapeutic delivery owing to their highly hydrated and bioinert nature. Nevertheless, developing injectable zwitterionic hydrogels that can form under mild and cytocompatible conditions remains a major challenge, especially for the delivery of fragile proteins and living cells. This challenge mainly stems from the weak intrinsic intermolecular interactions and limited reactive groups of zwitterionic polymers, which make it difficult to establish stable hydrogel networks without additional molecular modification or external crosslinking. Here, we report an injectable zwitterionic supramacromolecular hydrogel (SSH) formed by the spontaneous assembly of poly(methacryloyloxyethyl sulfobetaine) (PSBMA) and poly(styrenesulfonate) (PSSNa). Molecular dynamics simulations support the involvement of anion-π interactions in gelation, leading to a self-healing physically crosslinked network. SSH exhibits injectability, self-healing behavior, intrinsic antiadhesive properties, and favorable immunocompatibility. The mild gelation process enables efficient cell encapsulation and injection while maintaining high cell viability. In addition, SSH stabilizes and delivers basic fibroblast growth factor (bFGF), resulting in improved therapeutic efficacy in a diabetic wound-healing model. This work establishes a mild gelation strategy for injectable zwitterionic hydrogels and highlights their potential in biomedical delivery and cell-based therapies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Results in Engineering
·
2026
·
IF 9.4
Shun Zhang,Duanyang Geng,Enbin Zhu,Lifang Liu,Sheng Shi,Meiling Zhang
Recycling of waste textiles is technically challenging due to the diverse fiber compositions and coexistence of dye auxiliaries. Polyester/cotton (P/C) blended fabrics are the most widely used textile type, and their efficient recycling is critical to the development of the textile circular economy. In this study, a hydrothermal synergistic degradation strategy was proposed for the full-component and high-value recycling of waste P/C blended fabrics, which breaks through the limitation of traditional selective single-component recovery. In the hydrothermal system, the synchronous conversion of cotton and polyester was realized, and the micro-mechanism of their synergistic degradation was elucidated. Polyester was hydrolyzed to terephthalic acid (TPA) with a yield of 83.97 %, while cotton was degraded into carbon microspheres with a yield of 22.16 %. The generated TPA not only catalyzed the hydrolysis of cotton fibers but also participated in the growth of carbon microspheres, thus preparing carbon microspheres with a particle size of 1–2 μm. This strategy is also applicable to colored P/C blended fabrics without affecting the morphology, particle size and surface functional groups of carbon microspheres, enabling the direct recycling of colored P/C fabrics without pre-decolorization. This study opens up a new technical approach for the efficient resource utilization of waste blended textiles, and provides theoretical basis and practical support for the sustainable recycling of waste textiles.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Wu Jing,Yang Jingying,Liu Qisijing,Zhang Pixian,Zheng Bowen,Liu Linyuan,An Tingtao,Wang Hao,Xu Fupei,Shen Yudi,Wang Shuo
Characterizing exercise-induced fatigue is challenging due to difficulties in monitoring biochemical and electrophysiological signals consistently. While wearable sensors able to monitor both signals are available, they struggle to maintain stable signal acquisition across exercise-rest scenarios because of significant sweat variation. Here we describe the development of a system, FatigueVisual, combining an adaptive sweat-regulating hybrid electronic textile (e-ASRHT) patch with artificial intelligence (AI) analytics to improve fatigue management. The key innovation lies in the precise regulation of the breakthrough pressure of micropores in fabric electrodes and sweat-excreting areas, allowing for accurate sweat management. This design enables efficient enrichment at an ultralow sweat rate (5.0×10 −4 ml cm −2 min −1 ) while rapidly transporting excess sweat at a rate 2533 times the human physiological limit, ensuring stable chemical-electrophysiological sensing from exercise to rest. A cloud-connected AI model, trained on over 200,000 time-resolved observations collected from 10 participants, recognizes six fatigue-related states and provides personalized exercise management via a mobile app. Validation in three participants showed 87.3% agreement with clinical assessments. The system reduced exercise fatigue by 51.8% and accelerated recovery by 48 h compared with the control group. In practice, FatigueVisual may enable intelligent sports health management.
✓ 已验证
产品关联
DOI
高影响因子