文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3073至3084个,产品总数11,257个

切换升序
Co
MOLECULES · 2025 ·Vol. 30 ·期 9 ·1945 · IF 4.6

Structural Investigation and Energy Transfer of Eu3+/Mn4+ Co-Doped Mg3Ga2SnO8 Phosphors for Multifunctional Applications

Zaifa Yang

In recent years, rare earth ion and transition metal ion co-doped fluorescent materials have attracted a lot of attention in the fields of WLEDs and optical temperature sensing. In this study, I successfully prepared the dual-emission Mg3Ga2SnO8:Eu3+,Mn4+red phosphors and the XRD patterns and refinement results show that the prepared phosphors belong to the Fd-3m space group. The energy transfer process between Eu3+and Mn4+was systematically investigated by emission spectra and decay curves of Mg3Ga2SnO8:0.12Eu3+,yMn4+(0.002 ≤ y ≤ 0.012) phosphors and the maximum value of transfer efficiency can reach 71.2%. Due to the weak thermal quenching effect of Eu3+, its emission provides a stable reference for the rapid thermal quenching of the Mn4+emission peak, thereby achieving good temperature measurement performance. The relative thermometric sensitivities of the fluorescence intensity ratio and fluorescence lifetime methods reached a maximum value of 2.53% K−1at 448 K and a maximum value of 3.38% K−1at 473 K. In addition, the prepared WLEDs utilizing Mg3Ga2SnO8:0.12Eu3+phosphor have a high color rendering index of 82.5 and correlated color temperature of 6170 K. The electroluminescence spectrum of the synthesized red LED device by Mg3Ga2SnO8:0.009Mn4+phosphor highly overlaps with the absorption range of the phytochrome PFRand thus can effectively promote plant growth. Therefore, the Mg3Ga2SnO8:Eu3+,Mn4+phosphors have good application prospects in WLEDs, temperature sensing, and plant growth illumination.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2025 · IF 8.3

Fast synthesis of lamellar TiO2 for promoting photocatalytic H2 evolution with low co-catalyst loading

Xiaoyu Wang,Peng Li,Mingyue Yang,Jianwei Zhao,Tao Wang,Dong Hao

Two-dimensional materials have garnered significant attention in recent years due to their remarkable electron-hole transfer capability. However, the advancement of convenient and rapid synthesis techniques remains crucial for further research in this field. In this study, lamellar anatase/rutile-TiO 2 phase heterojunctions with a favorable phase interface was synthesized through a fast annealing route using glucose as the template and titanium tetrachloride. The sample synthesized at 600 °C with a holding time of 20 min exhibited the most significant levels of H 2 evolution activity (53.22 mmol g −1  h −1 ) with a low loading of 0.05 wt% Pt co-catalyst, which is significantly higher than the commercial P25 sample. The characterization reveals that the anatase/rutile-TiO 2 phase heterojunction in the two-dimensional sheet exhibits excellent phase interface contact and possesses a large specific surface area with an appropriate pore size. These characteristics are advantageous for facilitating the separation and migration of carriers, thereby enhancing the efficiency of the H 2 production reaction through hydrolysis. This study presents a novel approach towards the advancement of highly effective two-dimensional photocatalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS · 2025 · IF 4.6

Study on efficient electrolytic Co removal and structural properties of PDC via complexing agent regulation

Houzhen Chen,Fuming Deng,Xiaotian Xing,Miao Gu,Jing Duo,Zhenhai Guo,Zhangjie Ye,Wenli Deng,Ziyi Liu,Qiang Chen,Yefei Zhang,Lei Zhang

In order to minimize the influence of metallic Co on the structural properties of polycrystalline diamond compact (PDC), this study employed an efficient electrolytic Co removal process to investigate the mechanism of complexing agents—Glycine (Gly), Citric Acid (CA), Tartaric Acid (TA), and Ethylene Diamine Tetraacetic Acid (EDTA)—in the electrolytic Co removal from PDC. The results show that Gly performed significantly better than CA, TA, and EDTA in Co removal from PDC. At the Gly concentration of 0.08 mol/L, the Co removal depth and Co removal rate reached 635 μm and 90.77 %, respectively, after 4 h of electrolysis. This significantly improves the efficiency of Co removal and enhances the abrasion ratio of PDC. Furthermore, Gly effectively relieved internal stresses within PDC and formed interconnected pore structures between diamond particles. These changes reduced the risk of delamination and cracking caused by residual stresses, thereby enhancing the service reliability of the material.

CAS / MDL: 162303-59-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CARBON · 2025 · IF 11.6

Cocklebur-inspired 3D Co/CoO/RGO/CNT crosslinked heterostructures for highly efficient electromagnetic wave absorption

Xianghong Li,Yuan Shu,Tingkai Zhao,Jalil abdul,Haoxin Duan,Muyang Ma,Tao Jiang,Yanzong Liu

Electromagnetic functional materials are playing an increasingly vital role in electromagnetic interference shielding, stealth protection, and information security. Carbon nanotubes (CNTs), owing to their unique structure and outstanding electromagnetic properties, have attracted widespread attention. Here, a 3D Co/CoO/RGO/CNT crosslinked heterostructure was fabricated by in-situ growth of CNTs on Co(CO 3 ) 0 · 5 (OH)·0.11H 2 O precursors that were crosslinked with reduced graphene oxide through a combined hydrothermal and chemical vapor deposition strategy. The resulting interconnected conductive heterostructures significantly enhanced electron transport, interfacial polarization, and impedance matching. Notably, the optimized composites achieved a minimum reflection loss of −23.95 dB with an effective absorption bandwidth of 4.2 GHz (at 10 wt% filler loading and 2.17 mm thickness), fully covering the X-band. Furthermore, the study of heterointerfaces between different components and their underlying loss mechanisms provides critical insights into the electromagnetic wave absorption behavior and guides the rational design of advanced structural materials. Density functional theory simulations were also employed to investigate the electronic structure and charge distribution at the Co–CoO and Co–CNT interfaces. The simulation results reveal that charge redistribution and the formation of interface dipoles contribute to enhanced dielectric and magnetic losses, offering a microscopic explanation for the superior microwave absorption performance.

CAS / MDL: 1336-21-6 9002-89-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2025 · IF 5.1

Boron‑nitrogen co-doped worm-like porous carbon for highly sensitive electrochemical detection of acetaminophen

Mingmei Ge,Chenxi Wu,Yingjun Wang,Shiyu Wang,Shuohui Li,Xiangkun Tan,Yang Zhao,Huan Wang

This work presents a pioneering approach to convert agricultural waste rice husk into boron‑nitrogen co-doped hierarchical porous carbon (BNRHBC) through a facile one-step chemical etching/pyrolysis strategy, achieving high-value utilization of biomass resources. By employing zinc chloride as the chemical etchant and urea/boric acid as dual dopants, the synthesized BNRHBC exhibits a unique worm-like three-dimensional interconnected porous structure with a large specific surface area and uniform distribution of heteroatoms. The synergistic effect of boron and nitrogen co-doping not only creates abundant active sites but also optimizes the electronic structure of the carbon matrix, significantly enhancing electron transfer kinetics and electrocatalytic activity. When modified onto a glassy carbon electrode, the BNRHBC-based electrochemical sensor demonstrates exceptional performance for acetaminophen detection, including a wide linear range of 0.2–100 μM, a low detection limit of 0.036 μM, excellent anti-interference capability against common ions and organic compounds, and long-term stability with 64.70 % current retention after 30 days. Practical validation in real water samples (diluted tablet extracts and Songhua River) yields satisfactory recovery rates ranging from 87.20 to 107.28 %, confirming its reliability for environmental monitoring. This study bridges sustainable biomass conversion and advanced analytical sensing, offering a cost-effective and eco-friendly solution for pharmaceutical pollutant detection and health risk assessment.

CAS / MDL: 103-90-2 7646-85-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Small · 2025 ·Vol. 21 ·期 21 ·2500943 · IF 12.1

Simultaneously Enhance Humidity Tolerance and Ionic Conductivity of Halide Electrolytes by Cation–Anion Co-Doping

Weizong Wang,Kexuan Jing,He Ma,Kang Liang,Peng Wei,Jiangchuan Liu,Yurong Ren,Qian Zhao,Zhengping Ding

Halide solid-state electrolytes (SSEs) with high ionic conductivity and oxidation stability show significant potentials for the commercialization of all-solid-state batteries (ASSBs). However, their practical applications are limited by poor humidity tolerance and decreased ionic conductivity. Herein, the Li 3/3- x In 1- x M x Cl 5.6 F 0.4 ( M = Hf, Zr, Fe, and Y; x = 0.015, 0.02, 0.025, 0.075, 0.1, 0.125, and 0.15) are synthesized by co-doping Li 3 InCl 6 with M and F ions for high-performance ASSBs. Li 2.98 In 0.98 Hf 0.02 Cl 5.6 F 0.4 achieves the highest ionic conductivity of 1.04 mS cm −1 at room temperature and good humidity tolerance of 87.96% conductivity retention after 24 h exposure. The analysis of experiments combining BVSE and AIMD simulations indicates that it benefits from the enhanced rigid structure that is thermodynamically stable to water caused by Cl − doping with F − and higher Li + vacancies concentration that facilitates Li + conduction generated by In 3+ doping with Hf 4+ . Moreover, an all-solid-state battery ensembled with Li 2.98 In 0.98 Hf 0.02 Cl 5.6 F 0.4 , LiCoO 2 and Li–In alloy, exhibits a high discharge capacity of 83.6 mAh g −1 and 78.6% capacity retention after 100 cycles under 0.5 C at 25 °C. This work provides a reliable strategy for designing advanced halide SSEs for commercial applications in ASSBs by cation–anion co-doping.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Functional Materials Letters · 2025 · IF 1.1

Enhanced ionic conductivity of Ga/Nb Co-doped LLZO ceramic electrolyte via sintering regime optimization

Jie Zhao,Ming Guan,Can Cui,Saifang Huang

To enhance the room-temperature lithium-ion conductivity and interfacial stability of Li 7 La 3 Zr 2 O 1 2 (LLZO) solid-state electrolytes, a co-doping strategy with Ga 3 + and Nb 5 + was employed. By systematically optimizing the sintering protocol — including heating rate, temperature, and dwell time — highly dense and phase-pure cubic-phase LLZO ceramics were successfully synthesized. The co-doping approach effectively stabilized the cubic garnet structure and regulated the lattice framework to facilitate Li + transport pathways. Under optimized conditions, compared to undoped LLZO (0.31 mS cm − 1 , 0.362 eV), the co-doped ceramic exhibited significantly enhanced total ionic conductivity (0.81 mS cm − 1 ) and reduced activation energy (0.207 eV), confirming the superior transport performance enabled by the co-doping strategy. Furthermore, the electrolyte showed good wettability and interfacial compatibility with metallic lithium, enabling stable cycling performance in symmetric Li∥Ga/Nb-LLZO∥Li cells over short durations. These results confirm the practical potential of the co-doped LLZO electrolyte in all-solid-state lithium batteries. This study provides a viable pathway for the material design and processing of high-performance LLZO-based solid electrolytes.

CAS / MDL: 12024-21-4 1313-96-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
International Journal of Nanomedicine · 2025 · IF 6.5

Co-Targeting Biomimetic Nanoparticles Alleviate Atherosclerosis by Inhibiting the Vicious Circle Between Inflammation and Lipids

Chengxi Wu,Yaoyao Li,Yuting Liu,Xueqin Wang,Ping Yuan,Maochang Xu,Yiping Deng,Zongquan Zhang,Chunhong Li,Xiangyu Zhou

Background In the microenvironment of atherosclerosis (AS), low-density lipoprotein (LDL) accumulates in injured endothelial areas and undergoes oxidation, thereby generating oxidized LDL (ox-LDL). The formation of ox-LDL, in turn, not only amplifies endothelial cell (EC) dysfunction but also triggers macrophage polarization into the pro-inflammatory M1 phenotype. This cascade results in increased inflammatory cytokine secretion and exacerbated lipid accumulation. Therefore, a dual-targeting strategy aimed at both ECs and macrophages to inhibit the vicious circle between inflammation and lipids is a promising avenue for AS treatment.Methods Simvastatin (SIM)-loaded nanomicelles (PLA-PEG/SIM) were prepared using the thin-film hydration method. Then, platelet membrane (PM) was coated the nanomicelles via sonication to obtain PM@PLA-PEG/SIM dual-targeting biomimetic nanoparticles. The morphological features of the nanoparticles were assessed by transmission electron microscopy (TEM). Cytotoxicity was evaluated using the CCK-8 assay and live/dead cell staining. Their targeting ability toward ECs and macrophages was assessed by flow cytometry and confocal laser scanning microscopy (CLSM). The biosafety, targeting ability, and therapeutic efficacy of PM@PLA-PEG/SIM against AS were further validated in ApoE−/− mouse models.Results PM@PLA-PEG/SIM effectively reduced the drug toxicity of SIM, exhibiting good biocompatibility. In vitro, cell experiment results showed that the nanoparticles inhibited foam cell formation, decreased interleukin-6 (IL-6) expression, and increased interleukin-4 (IL-4) and interleukin-10 (IL-10) expression by promoting macrophage repolarization. In vivo, results indicated that the formulation demonstrated excellent plaque-targeting ability. More importantly, the plaque area and lipid levels in the PM@PLA-PEG/SIM group were lowest, and plaques were most stable, showing its best therapeutic efficiency.Conclusion PM@PLA-PEG/SIM alleviated progression of AS by co-targeting ECs and macrophages to inhibit the vicious cycle between inflammation and lipids. Our study provides a new strategy for the treatment of the disease by the co-targeting biomimetic nanoparticle.

CAS / MDL: 79902-63-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2025 · IF 7.3

Isodimorphic Poly(trimethylene adipate-co-terephthalate) Copolyesters with Good Spinnability and Closed-Loop Chemical Recycling

Wangkai Xiang,Xuekuan Ma,Gaoyi Wu,Junfeng Liu,Chengtao Yu,Bao Wang,Tengjiao Hu,Zhixin Guo,Ying Zheng,Pengju Pan

The disposal of postconsumer textiles presents a critical challenge to environmental sustainability, while most existing biodegradable copolyesters exhibit poor spinnability. Therefore, developing sustainable copolyesters that combine robust processability, degradability, and closed-loop recyclability is essential for advancing ecofriendly fiber materials. Herein, we synthesized the high-molecular-weight poly(trimethylene adipate-co-terephthalate) (PTAT) copolyesters with varying compositions through esterification and melt-polycondensation. The relationships between copolyester composition, crystalline structure and properties, spinnability, and chemical recyclability were systematically investigated. The copolyesters exhibit isodimorphic crystallization features, showing the pseudoeutectic region at the trimethylene adipate fraction of 0.79–0.88. The crystalline structure of copolyesters transforms from poly(trimethylene terephthalate)-type to poly(trimethylene adipate)-type crystals at the pseudoeutectic region. The incorporation of adipic acid units reduces the crystallizability and crystallinity of copolyesters while simultaneously enhancing the toughness and degradability. Importantly, these copolyesters show good spinnability, allowing successful fiber fabrication through melt-spinning, and also demonstrate closed-loop chemical recyclability through efficient depolymerization into monomers under mild conditions. This study offers deep insights into the molecular design of sustainable copolyesters with good spinnability, degradability, and recyclability.

CAS / MDL: 29736-75-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

High-efficient separation mechanism of Co/Mo/V system by ethanolamine-induced phosphonic acid extractants

Hongtao Liu,Jiawei Wen,Lei Cao,Junlian Wang,Xin Wang,Guoyong Huang,Shengming Xu

Conventional phosphonic acid extractants such as bis (2-ethylhexyl) phosphate (P204) have only been used for cobalt extraction and perform poor separation efficiency. In this work, we propose a route to synergistically extract and separate Co, Mo, and V from spent hydrogenation catalysts by utilizing the modulating effect of ethanolamine (MEA) on phosphonic acid-based extractants, which eliminates the need for saponification and acidification of the extractants. The extraction mechanism of V, Co and Mo have been explained detailedly. By performing quantum chemical calculations on the surface properties of various amines, their metal extraction effects were predicted and validated using machine learning, laying the foundation for the design of synergistic extractants. The Co/Mo/V selective separation process was finally built with the aim of extracting cobalt first in the form of Co(RNH 2 ) 2 A 2 . At a P204 concentration of 25 %, MEA addition of 5 %, stirring time of 10 min, stirring rate of 400 rpm, the combined recoveries of the three metals Co, V and Mo reached 94.56 %, 85.60 % and 88.81 %, the separation factors β Co/Mo and β Co/V could be increased up to 44748.77 and 1174.04, respectively. It was also demonstrated that the extractant was also suitable for the selective extraction of Ni 2+ . This work provided fundamental research for the development of high-performance extraction systems.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2025 · IF 5.4

Vinyl sulfonamide/PEG co-immobilized on the surface of magnetic beads for the chemiluminescent immunoassay

Shihong Zhu,Daohang Du,Shuli Yu,Ting Tao,Xianfeng Chu,Yunhua Jiang,Jia Yang,Jiefu Li,Zhifei Wang

Chemiluminescent immunoassays utilizing magnetic nanoparticles exhibit critical importance in in vitro diagnostics, attributed to their remarkable superparamagnetic properties, high specificity, and uniform monodispersity. Current surface functionalization strategies for antibody conjugation predominantly rely on carboxyl or amino groups, requiring pre-activation steps for both amino- and carboxyl-modified nanoparticles prior to antibody labeling. However, the complex activation protocols and persistent challenges in developing efficient chemiluminescent detection methods highlight significant technical obstacles. To address these limitations, we developed vinyl sulfone-functionalized magnetic beads (VSF-GMP), enabling rapid antibody conjugation via specific reactions between vinyl sulfone groups and lysine residues exposed on the surface of creatine kinase MB isoenzyme antibodies (CK-MB). This approach facilitates highly efficient chemiluminescent immunoassays. The engineered VSF-GMP magnetic beads demonstrated molecular weight-dependent adsorption profiles, achieving maximal binding capacity (86.32 μg/mg) for mouse IgG (150 kDa) compared to β-lactoglobulin (18.2 kDa) and bovine serum albumin (66.4 kDa). Moreover, compared with the protein coupling method using EDC/NHS-activated carboxylated magnetic beads, our VSF-GMP beads exhibited superior coupling efficiency. Additionally, bis-functionalized poly(ethylene glycol) (NH 2 -PEG-NH 2 ) was employed as a blocking agent to optimize the reactivity and stability of antibody conjugation, reducing non-specific protein labeling on the magnetic beads by 97.8 %. The analytical performance of the proposed chemiluminescent immunoassay (CLIA) was rigorously evaluated. Finally, the practical utility of VSF-GMP magnetic beads for CK-MB determination in plasma samples was investigated. These engineered magnetic beads showcase exceptional analytical sensitivity, specificity, and operational simplicity, establishing a robust platform for advanced chemiluminescent diagnostics with enhanced throughput capabilities.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2025 · IF 3.9

Valence Modulation of CeO2/CuxO Inverse Catalysts via Crystal Plane Engineering for CO Preferential Oxidation

Wenxia Zhou,Guoqiang Song,Jiaxi Zhong,Yumeng Liu,Xiaohua Chen,Muchen Yu,Shaohan Yuan,Qiliang Fan,Xia Gong,Qian Liu,Feiyang Hu,Lei Gong,Sibudjing Kawi

The CO preferential oxidation is vital for proton exchange membrane fuel cell (PEMFC) stability, and the reverse catalyst design shows promise for improving its activity and durability. Herein, cubic and octahedral Cu2O crystals were synthesized via the solid-phase method. Subsequent decoration with CeO2 yielded inverse CeO2/Cu2O catalysts, and oxidative treatment converted Cu2O to CuO, forming the final CeO2/CuO catalysts. The CeO2/Cu2O catalyst exhibits superior activity compared to CeO2/CuO, with CeO2/Cu2O-8 demonstrating the lowest complete CO conversion temperature (168 °C) and the widest operating window (168–200 °C). This enhanced performance originates from unsaturated copper sites, which facilitate faster electron transfer and oxygen vacancy formation while providing high specific surface area and elevated Ce3+ content. This study established fundamental insights for designing inverse catalysts through crystal plane engineering in CO-PROX, potentially extending to other catalytic systems requiring precise surface control.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。