文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3073至3084个,产品总数3,922个

切换升序
MXene
TRIBOLOGY INTERNATIONAL · 2024 · IF 6.1

Exploration of the mechanism of wear and seawater erosion resistance of modified MXene-reinforced Ni-Cu alloy composite coatings

Xingtao Cheng,Yi He,Siming Yan,Liping Yan,Zhiyuan Li,Shijun Xu,Kaijun Wei,Yi Fan,Quangang Chen,Wanwan Peng

Wear and erosion are common issues encountered when applying metal components in harsh marine environments. In this study, N-MX@ZnO materials were prepared by a synergistic modification of Ti 3 C 2 T x using ethylenediamine and zinc oxide quantum dots. Subsequently, the Ni-Cu/N-MX@ZnO coating was deposited onto J55 steel using pulsed electrodeposition, exhibiting excellent tribological properties. The toughness, wear, and seawater erosion behavior of the coatings were investigated. The results demonstrated that the COF value of the Ni-Cu/N-MX@ZnO coating was reduced by 48.23% and the impedance value was increased by 300% in comparison to the pure sample. The enhancement mechanism can be attributed to the physical barrier effect and uniform dispersion effect of N-MX@ZnO, which caused the Ni-Cu/N-MX@ZnO coatings to form a friction-transferring film during the friction process.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2025 · IF 7.9

Functionalized MXene acts as a crosslinking agent to construct new anion exchange membranes for anion exchange membrane water electrolysis

Yu Chen,Zongxue Yu,Junlei Tang,Xiuzhu Zhang,Shijie Guo,Xunwang Tang,Zhiquan Chen,Yingqing Zhan

As one of the core components of anion exchange membrane water electrolyser (AEMWE), the performance of anion exchange membrane (AEM) has a direct impact on the application effect of the water electrolyzer. Chemical cross-linking method is an effective way to solve the problem of balancing membrane dimensional stability and ionic conductivity and improve mechanical properties. However, the crosslinked network brings hindrance to the ionic transport rate and causes the loss of ionic conductivity, having a direct impact on the application effect of water electrolysis. In this paper, a series of Poly(biphenyl-co-m-triphenyl-piperidine) (PBMP) based on composite AEMs are prepared by functionalized modification of MXene with high electrical conductivity as an inorganic cross-linking agent, and the electrical conductivity of MXene overcomes the hindrance of cross-linking on ion transport. Inorganic crosslinkers are classified into hexane hydrocarbon crosslinkers (6-NH 2 -Alk-Ti 3 C 2 T x ) and ethane hydrocarbon crosslinkers (2- NH 2 -Alk-Ti 3 C 2 T x ). The AEMs prepared with 2-NH 2 -Alk-Ti 3 C 2 T x crosslinker exhibit higher ionic conductivity (112.0 mS cm −1 ) due to a sharper microphase separation morphology. The presence of a crosslinked network within the membrane reduces the swelling ratio of the membrane (80 °C, 1.2 %) and improves the mechanical properties (from 29.2 MPa to 55.3 MPa). In addition, the AEMWE prepared by PBMP-0.46-2-NH 2 -Alk-Ti 3 C 2 T x (PBMP-0.46–2M) membrane reaches 760 mA cm −2 at 2.0 V, 70 °C in 1 M KOH solution. Therefore, it is feasible to realize AEMs prepared with functionalized MXene as crosslinker and filler for application in electrolysis cells.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Nano · 2024 · IF 15.8

Facilitating Ion Storage and Transport Pathways by In Situ Constructing 1D Carbon Nanotube Electric Bridges between 2D MXene Interlayers

Qi Fan,Kui Xu,Minghua Chen,Qing Tang,Ke Chen,Xiaofei Hu,Fuli Lan,Yueqi Wang,Hui Shao,Sicong Qiao,Ziwei Yan,Changda Wang,Li Song,Wencheng Hu,Michael Naguib,Patrice Simon,Qing Huang,Yao Xiao,Kun Liang

Multiple van der Waals (vdW) gaps invoke abundant opportunities for contriving artificial architectures and tailoring desired properties via the intercalation route beyond the reach of conventional concepts. Intriguingly, the electrochemical intercalation strategy can precisely and reversibly tune the intercalation stage of charged functional species. This study presents a valid structural editing protocol facilitated by electrochemical intercalation to engineer MXene interlayers, ultimately incorporating in situ constructed carbon nanotube (CNT) electric bridges for enhanced ion storage and transport pathways. The method allows for the precise modulation of electrochemical forces to tailor materials for specific applications. Deep intercalation and in situ growth processes establish robust anchoring sites and connectivity hubs between MXenes and CNTs, ensuring structural homogeneity and stability in advanced electrode materials. The results demonstrate the effectiveness of electrochemistry-mediated interlayer nanoengineering in MXenes, offering a versatile approach to design vdW heterostructures with tailored functionalities for energy storage and conversion applications. This work highlights the potential of electrochemical modulation in advancing materials engineering strategies for next-generation energy storage technologies.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
COMPOSITES COMMUNICATIONS · 2024 · IF 6.5

FDM 3D printed MXene/Recycled carbon fibre reinforced polylactic acid composites: Interface optimization, toughening and enhanced electromagnetic shielding performance

Yunzhongze Hu,Jiafei Gu,Yang Zhang,Gongyu Liu,Xiaosu Yi,Xiaoling Liu

Polylactic acid (PLA), a rapidly emerging bio-based plastic, faces challenges in reinforcement due to its weak mechanical properties and poor interface adhesion with carbon fibre surfaces. This study introduces an MXene/recycled carbon fibre (rCF) reinforced PLA 3D printing material, prepared through electrostatic self-assembly of MXene and recycled carbon fibre. MXene addition significantly enhances the fibre-substrate interface bonding in fibre-reinforced PLA filaments. This results in the printed parts displaying enhanced toughness, the flexural strength achieved of 105.45 MPa, modules of 5.98Gpa, and notched impact strength of 7.12 kJ/m 2 , realizing 15.6 %, 112.1 %, and 31.8 % improvements, respectively in comparison to pure PLA. Additionally, the modified PLA demonstrates absorption-dominated superior electromagnetic shielding performance. This research offers a viable approach for enhancing recycled carbon fibre-reinforced thermoplastic PLA and insights into designing sustainable, structurally, and functionally integrated composites.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

High-entropy TiVNbMoC3Tx MXene hybrid with balanced dielectric-magnetic loss for high-efficient electromagnetic wave absorption with environmental stability

Yongpeng Wu,Chaolong Chen,Fei Pan,Xiang Li,Wei Lu

With the advent of the 5G era, there is a growing demand for electromagnetic wave (EMW) absorbers that offer both efficient absorption and improved environmental stability. Transition metal carbides/carbonitrides (MXene), with their atomic-layered structures and high electrical conductivity, offer substantial potential for crafting efficient electromagnetic functional materials. Yet, enhancing the antioxidant capabilities and addressing the poor loss mechanisms of traditional MXene absorbers remain challenging tasks. In this context, a TiVNbMoC 3 T x high-entropy MXene (HE-MXene) and its magnetic hybrids were synthesized for the first time. The unique multicomponent structure of high-entropy MXene reduces grain boundary formation, thereby slowing the progression of oxidation reactions. The incorporation of magnetic nanoparticles induces interface polarization loss or strong magnetic coupling, thereby enhancing EMW attenuation. These magnetic HE-MXene hybrids demonstrated a minimum reflection loss of −57.59 dB at a matching thickness of 1.46 mm and an effective absorption bandwidth (EAB) of 4.72 GHz at a thickness of 1.53 mm. Furthermore, the magnetic hybrids also exhibited outstanding oxidation and electrochemical corrosion resistance. This research provides valuable theoretical insights for the development of electromagnetic composites within high entropy (HE) systems, showcasing significant potential for long-term applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2025 · IF 8.5

Extraction and incorporation of cellulose microfibers from textile wastes into MXene-enhanced PVA-borax hydrogel for multifunctional wearable sensors

Md. Zahid Hasan,Chuanghua Xu,K.Z.M. Abdul Motaleb,Md Foysal Ahmed,Jie Zhuang,Sirui Tan,Jolanta Janutėnienė,M. Mahbubul Bashar,Hu Tu,Lei Luo,Ruquan Zhang

Conductive hydrogel has drawn great concern in wearable sensors, human-machine interfaces, artificial intelligence (AI), health monitoring, et al. But it still remains challenge to develop hydrogel through facile and sustainable methods. In this work, a conductive, flexible, bendable and self-healing hydrogel (PBCM) composed of polyvinyl alcohol (PVA), borax, cellulose microfibers (CMFs) and MXene nanosheets was fabricated by a simple and efficient strategy. The carboxylated CMFs were extracted from waste ramie fibers via a one-pot ammonium persulfate oxidation method. The crystallinity and tensile strength were increased 70 % and 4 times due to the addition of CMFs and MXene compared to the pristine PVA-borax hydrogel. The incorporation of MXene nanosheets acts as multifunctional cross-linkers and energy transfer platform, promoting the electrical conductivity, stretchability and bendability of hydrogel remarkably. The PBCM-2 hydrogel exhibited the maximum electrical conductivity of 0.81 S/cm. Additionally, the dynamic borate ester linkage imparts self-healing ability to the hydrogel. The resulting PBCM-2 hydrogel demonstrated excellent resistance to fire and pH response properties. Moreover, it showed sensitivity in monitoring various human physiological movements, including finger, wrist, elbow, knee bending and drinking water, indicating its potential for wearable sensing applications like health care and sports training.

CAS / MDL: 9002-89-5 1303-96-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Energy Materials · 2024 · IF 5.4

Immobilizing Ultralow Loading Platinum Nanoparticles onto MXene through Defect Engineering to Enhance the Activity of the Hydrogen Evolution Reaction

Maoda Xu,Jingle Huang,Xin Yue,Shaoming Huang

Developing low-cost, highly active, and durable electrocatalysts for the hydrogen evolution reaction (HER) in acidic medium is essential for achieving the large-scale utilization of proton exchange membrane water electrolyzers. It has been demonstrated that non-precious-metal electrocatalysts are unable to substitute the most efficient platinum in a short period. Consequently, the fabrication of Pt-based heterogeneous electrocatalysts with ultralow loading and ultrahigh Pt utilization efficiency becomes a practical approach. Herein, an approach is reported to immobilize ultralow loading (∼0.26 wt %) Pt NPs to Mo vacancies on the surface of Mo2Ti2C3Tx MXene. Because of the anchoring by Mo vacancies and the vast surface area of MXene, defect enriched Mo2Ti2C3Tx supported Pt nanoparticles (Pt NPs/d-Mo2Ti2C3Tx) possess ultrasmall particle sizes (∼2.1 nm) and increased dispersity of Pt NPs. As a result, the as-prepared Pt NPs/d-Mo2Ti2C3Tx reaches a current density 100 mA cm–2 at an overpotential of 123 mV. When compared to Pt/C (20 wt %), the mass activity of Pt on Pt NPs/d-Mo2Ti2C3Tx is found to be 134 times higher. Meanwhile, it presents a high turnover frequency (8.49 H2 s–1 at overpotential of 50 mV) and fast kinetics (a Tafel slope of 30.1 mV dec–1) as well as high durability (maintaining the current density of 100 mA cm–2 for more than 15 h). Theoretical simulations reveal that transferring electrons from Mo atoms regulated the d-band electronic structure of Pt NPs, resulting in a stronger interaction with adsorbed H species and ultimately boosting the HER activity.

CAS / MDL: 872-50-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2024 · IF 8.1

In-situ thermally induced formation of an ultra-glossy hydrophilic surface for oil fouling prevention in TiO2@MXene membranes

Yuqing Sun,Chenye Dai,Jian Lu,Yapeng Zhu,Yingxuan Deng,Xianyin Cai,Dong Zou,Wenheng Jing

Oil droplets are inevitably deposited on the surface of membranes, resulting in membrane contamination during oily sewage separation. To effectively prevent oil fouling, a TiO 2 @MXene membrane with an ultra-glossy hydrophilic surface was designed via in-situ thermal induction to regulate the membrane surface structure and properties. Through high temperature-induced evolving the Ti valence and the functional groups of Ti 3 C 2 T x , uniform TiO 2 nanoparticles were generated in-situ on the Ti 3 C 2 T x surface while altering the surface structure and properties, which considerably improved the hydrophilicity, underwater oleophobic properties, and surface finish of the membrane. Specifically, the TiO 2 @MXene membrane (MT600) exhibited a low water contact angle of 7.5° and a high underwater oil contact angle of 133.3°. Notably, the oil adhesion force of the membrane was as low as 0.0013 μN, outperforming most oil water separation membranes. Thus, the unique structure and surface properties endowed MT600 membrane with excellent oil retention (TOC removal efficiency of > 95 %) and antipollution ability (permeance decay rates of < 10 %) for oil-in-water emulsion separation. This is because the ultra-glossy hydrophilic and oleophobic surface prompted the formation of a continuous and stable hydration layer on the membrane surface and prevented oil droplets from falling into the membrane grooves. Benefiting from the robust, ultra-glossy surface, the MT600 membrane exhibited excellent long-term durability and reusability (emulsion permeance recovery of > 90 %) in high-salt, highly acidic, and highly alkaline environments. This study opens pathways to realize ultra-glossy membrane surface for the efficient demulsification of small size emulsions and long-lasting, stable oil water separation.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2025 · IF 19

Industrial-Grade Flexible Carbon Fiber Paper/MXene Composite Electromagnetic Shielding Material with Ultra-Large Area and Ultra-High Performance

Meiping Song,Zhi Liu,Yu Wang,Chenhui Liu,Jiancheng Guo,Wei Wang,Xueping Gao,Bo Zhu,Xiaomin Yuan

Paper-based composites are excellent choice for flexible electromagnetic shielding materials. Carbon fiber paper (CFP), with its excellent electrical conductivity and porosity, can be combined with various conductive materials to further improve electromagnetic interference (EMI) shielding capabilities. However, the large-scale industrial application of CFP remains rarely explored and requires further research to optimize its overall performance for commercialization. MXene, a 2D material with metal-like conductivity, can significantly enhance electromagnetic wave (EMW) energy loss. This study investigates the effects of MXene concentration gradients and the number of sprayed layers on EMI shielding effectiveness of carbon fiber paper using a simple spraying process. The electromagnetic shielding composite paper is fabricated through a impregnation blending technique, while the correlation between the number of layers and EMI shielding efficiency is systematically investigated. Results show that a 7-layer composite paper achieves an average EMI SE of 78.23 dB in the X─band. The composite also exhibits excellent hydrophobicity, high tensile strength, flexibility, and ultra-lightweight properties. The surface density of the 7-layer assembly material is only 0.08546 g cm −2 . The straightforward preparation process of this electromagnetic shielding composite paper makes it highly suitable for industrial-scale production, demonstrating significant potential in aerospace, 5G technology, and other related fields.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICA CHIMICA ACTA · 2024 · IF 5.7

In-situ and label-free measurement of cytochrome C concentration with a Ti2C-MXene sensitized fiber-optic MZI sensor

Po Jin,Ya-nan Zhang,Zhong Li,Wanlu Zheng,Liangliang Cheng,Like Li,Xuegang Li,Yong Zhao

Background The concentration of cytochrome C is demonstrated to be an effective indicator of the microbial corrosion strength of metals. Traditional cytochrome C sensor can detect cytochrome C with a low detection limit, but their use is limited by their high cost, cumbersome operation, and susceptibility to malignant environments. In addition, studies on the monitoring of cytochrome C in the field of microbial corrosion has still not been carried out. Therefore, there is a need for a highly sensitive, selective, low-cost, anti-interference, and stable cytochrome C sensor with online monitoring and remote sensing capabilities for in-situ measurement of microbial corrosion strength. Results This paper proposed a highly sensitive label-free fiber-optic sensor based on Mach-Zehnder interferometer (MZI) for in-situ measurement of the microbial corrosion marker cytochrome C. Two-dimensional Ti 2 C-MXene material is uniformly immobilized onto the surface of the sensing area to improve the sensitivity, hydrophilicity , and specific surface area of the sensing area, as well as to facilitate the immobilization of specific sensitive materials. The cytochrome C antibody is modified on the surface of Ti 2 C-MXene to specifically recognize cytochrome C, whose concentration variation can be measured by monitoring the spectral shift of MZI sensor. Results demonstrate a measurement sensitivity of 1.428 nm/μM for cytochrome C concentrations ranging from 0 to 7.04 μM. The detection limit of the sensor is calculated to be 0.392 μM with remarkable performance, including selectivity , stability, and reliability. Besides, the measurement result of the proposed sensor in real microbial corrosive environment is consistent with that of the ideal environment. Significance and novelty This is the first instance of achieving in-situ and label-free measurement of cytochrome C by using a fiber-optic MZI sensor, which undoubtedly provides a feasible solution for the effective monitoring of microbial metal corrosion in the environment.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2025 · IF 7.2

Insight into the mechanism of Bi modified MXene-derived TiO2 for efficient visible-light driven photocatalytic reduction of bromate

Zhihui Hu,Shasha Tang,Yan Jia,Zekun Dong,Yu Tang,Yuan Wu,Yan Zhang

The photocatalytic reduction of bromate (BrO 3 - ) in drinking water shows great promise. However, current photocatalysts mainly depend on UV light for effective bromate transformation. In this study, we introduced a novel visible-light-active catalyst, TBR (a combination of Ti 3 C 2 MXene, Bi, and TiO 2 ), synthesized through a straightforward hydrothermal method. Batch experiments were carried out in the laboratory to evaluate the photocatalytic removal effect of bromate by TBR under visible light. TBR completely eliminated 200   µg/L of bromate within 60   minutes (first-order kinetic constant: 0.0509   min -1 ). By employing photoelectric properties, density functional theory (DFT) and scavenger experiments, an intrinsic mechanism of the photocatalytic breakdown of bromate over the TBR/visible-light system was elucidated. The introduction of Bi induces the surface plasmon resonance (SPR) effect, and reduced the effective mass of electrons, resulting in a narrower band gap (from 2.88   eV to 2.50   eV) of the photocatalyst, and enables it to respond to visible light. Additionally, Ti 3 C 2 acted as an "electron sink," facilitating carrier migration and accumulation on its surface, creating a Schottky barrier that promoted efficient electron transfer and the separation of electron-hole pairs. Generation of ·O 2 - and ·OH radicals fostered mutual conversion of Br - and ·Br, playing a vital role in bromate removal. Moreover, TBR showed excellent stability. This research expands the potential of non-precious-metal photocatalytic co-catalysts for water treatment.

CAS / MDL: 10035-06-0 13463-67-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS ES&T Water · 2024 · IF 4.8

Interfacial Engineering of Bi3O4Br/MXene Schottky Junctions for Enhanced Adsorption Enrichment and Photocatalytic Regeneration Active Sites for Water Decontamination

Ya-Meng Dong,Bin Li,Zi-Hang He,Qin-Chen Li,Tong Li,Chang Liu,Xing Zhang

Photocatalytic technology still faces significant challenges in removing trace concentrations of organic pollutants from wastewater. In this study, we synthesized Bi3O4Br/MXene (BOB/M) with a Schottky junction structure, enhancing the continuous adsorption active site regeneration after visible light irradiation for organic pollutant removal. Notably, the adsorption removal rate of tetracycline by BOB/M under light irradiation increased by 29.2% compared to dark conditions, indicating that light exposure regenerates the adsorption active sites. This improvement is mainly attributed to the introduction of MXene, which promotes the formation of reactive species, thereby accelerating the regeneration of the adsorption sites. The composite exhibits superior adsorption performance for electropositive pollutant molecules compared with neutral and negatively charged ones. Moreover, through a series of experiments and analytical characterizations, we identified superoxide radicals as the primary reactive oxygen species responsible for the degradation of tetracycline, facilitating the regeneration of adsorption sites. Furthermore, the BOB/M material exhibits excellent anti-interference capacities and stability. This study provides a novel approach for designing photocatalysts that are effective at targeting trace levels of contaminants.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。