文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3085至3096个,产品总数6,361个

切换升序
cellulose
Polymers · 2021 ·Vol. 13 ·期 4 ·609 · IF 4.329

Preparation of a Novel Cellulose–Styrene Copolymer Adsorbent and Its Adsorption of Nitrobenzene from Aqueous Solutions

Guifang Yang,Na Lin,Yuan Li,Xiaoxia Ye,Yifan Liu,Yuancai Lv,Chunxiang Lin,Minghua Liu

A novel cellulose–styrene copolymer adsorbent (cellulose-St) was prepared using free radical polymerization. Successful polymerization was confirmed through Fourier Transform Infrared Spectroscopy (FTIR), Carbon 13 Solid Nuclear Magnetic Resonance (13C NMR) Spectroscopy, Scanning Electron Microscopy (SEM), etc. Cellulose-St possessed good hydrophobicity, and the best water contact angle of cellulose-St samples could reach 146°. It had the ability of adsorption for nitrobenzene (NB), and the adsorption process could be well described by the pseudo-second-order (R2> 0.99) and three-stage intraparticle diffusion (R2> 0.99) kinetic models. Furthermore, the dynamic adsorption experiments revealed that cellulose-St had the potential for continuous separation of NB in water, and the breakthrough point for the initial NB concentration of 10 mg/L reached 1.275 L/g. Moreover, cellulose-St exhibited excellent environmental adaptability that it could maintain its hydrophobicity and adsorption ability for NB in strong acids, strong alkalis, or organic solvents. The used cellulose-St could be reused after washing with ethanol and keep almost constant adsorption capacity after ten cycles.Keywords:cellulose;styrene;hydrophobicity;nitrobenzene;polymerization

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
CARBOHYDRATE POLYMERS · 2020 · IF 7.182

Preparation and anti-leakage properties of hydroxyethyl cellulose-g-poly (butyl acrylate-co-vinyl acetate) emulsion

Xiaomei Liu,Wei Zeng,Junji Zhao,Xueyan Qiu,Hongran Xiong,Yan Liang,Xie Ye,Ziqiang Lei,Denglong Chen

A hydroxyethyl cellulose-g-poly (butyl acrylate-co-vinyl acetate)(HEC-g-P (BA-co-VAc)) emulsion was synthesized by free radical emulsion polymerization method from hydroxyethyl cellulose (HEC), butyl acrylate (BA) and vinyl acetate (VAc) in the presence of emulsifier sodium dodecyl benzene sulfonate (SDBS). The structure, thermal stability and morphology of the emulsion were characterized by Fourier-transform infrared (FTIR), thermogravimetric analysis (TGA), transmission electron microscope (TEM) and other analytical techniques. The results proved that BA and VAc monomers had grafted with HEC. Its thermal stability was also significantly improved compared to HEC. Moreover, the prepared emulsion was evaluated to study the performance of preventing water leakage in soil. Compared with the published anti-leakage materials prepared by directly doping hydroxyethyl cellulose, the emulsion interacted with attapulgite to form a dense consolidation layer, which had better anti-leakage performance and water retention. Therefore, the material was more favorable for popularization and application in arid and semi-arid areas.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CELLULOSE · 2020 ·Vol. 27 ·期 16 ·9243-9256 · IF 4.21

Effect of regeneration solvent on the characteristics of regenerated cellulose from lithium bromide trihydrate molten salt

Huang Zhonglei,Liu Chao,Feng Xiaoyan,Wu Meiyan,Tang Yanjun,Li Bin

Abstract Dissolution and regeneration of cellulose is of vital importance for its end use. In the present work, the effect of different regeneration solvents (i.e. water, ethanol, and N, N-dimethylacetamide (DMAc)) on the characteristics of the regenerated cellulose from lithium bromide trihydrate (LBTH) molten salt was comprehensively investigated. It was found that the regenerated celluloses displayed obvious changes in macro- and micro-morphologies compared with the original microcrystalline cellulose (MCC). Furthermore, after the dissolution and regeneration process, the crystalline structure of cellulose was changed from cellulose I to cellulose II or amorphous structure, and the crystallinity of cellulose clearly decreased due to the deconstruction and rearrangement of cellulose chains. Moreover, the regenerated cellulose with ethanol had a relatively higher degree of crystallinity (70.2%) than that with water (42.3%) and DMAc (33.2%). Both X-ray Diffraction (XRD) and Attenuated Total Reflection Flourier transformed Infrared Spectroscopy (ATR-FTIR) analysis results indicated that ethanol as a regeneration solvent could be more beneficial to rearrange cellulose molecular chains and rebuild a more ordered structure compared to water and DMAc. In addition, thermogravimetric analysis showed that regenerated cellulose from LBTH exhibited a lower decomposition onset temperature and a higher char yield (over 17.8%) compared with the raw MCC (2.8%). The obtained results verified that regeneration solvents could substantially affect the reconstitution of cellulose molecule chains during regeneration as well as the multiscale structures and properties of the regenerated cellulose. Graphic abstract

CAS / MDL: 9004-34-6 7550-35-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2020 · IF 3.99

Self-assembling graphene oxide/modified amphipathic hydroxyethyl cellulose hybrid stabilized Pickering emulsion polymerization for functional hydrogel

Xiangdong Wang,Jiaxing He,Lanhua Ma,Bin Yan,Lingying Shi,Rong Ran

Herein, a self-assembled hybrid from bromoacetic acid (BA) modified amphipathic hydroxyethyl cellulose (MAHEC) and graphene oxide (GO) was prepared and used as Pickering emulsifiers to synthesizing functional porous hydrogel by removing the oil phase after emulsion templating polymerization. The MAHEC grafted with the 1-bromododecane was prepared by the phase-transfer method, and the graphene oxide was prepared by Hummers’ method. The interaction between the GO nanosheets and MAHEC molecular chain was investigated by X-Ray Diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The amphipathy of the GO and MAHEC was measured by the water contact angle, which was 74.0° and 103.0°, respectively. A stable, low cost, and biocompatible Pickering emulsion was fabricated by a low concentration of GO and MAHEC hybrid. Stabilization of Pickering emulsion prepared by the nanohybrid emulsifier GO and MAHEC at different conditions was investigated, such as different electrolyte concentration, pH, and oil/water ratio. The polyacrylamide (PAM) organo-hydrogel was polymerized by the stable Pickering emulsion template. After removing the olive oil, the inner wall of the porous hydrogel was coated by the MAHEC and GO for the pH-sensitive release. The strategy of Pickering emulsion templating polymerization by utilizing functional emulsifiers could be applied for the preparation of various smart materials.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2020 · IF 5.162

Growing Pd NPs on cellulose microspheres via in-situ reduction for catalytic decolorization of methylene blue

Yuqing Yu,Shilin Liu,Ying Pei,Xiaogang Luo

Dyeing industry highly contributes to environmental pollution and this needs to be addressed on priority. Pd NPs/CMs, a highly efficient and reusable catalyst for methylene blue (MB) decolorization , were fabricated by in-situ reduction method based on the cellulose microspheres (CMs). Pd NPs/CMs were characterized for the structure and catalytic performance by spectroscopic techniques such as SEM, EDS, XRD, IR, XPS, porosity, zeta potential , MS, and UV–visible spectroscopy, which all demonstrated that Pd NPs were distributed on the cellulose microspheres uniformly and exhibited excellent catalytic performances to decolorize a model organic dye MB in the presence of NaBH 4 with catalytic efficiency higher than 99.8%. More importantly, Pd NPs/CMs were proven to show excellent reusability for at least five cycles. Decolorization mechanism of MB, via the destruction of the chromophores (C N and S ) of MB, was established with the help of MS combined with IR and XPS. Blank experiments using pure cellulose microspheres were carried out simultaneously to estimate the level of catalytic capacity achieved to Pd NPs/CMs. These materials proved themselves having great potential in large scale applications to treat dye-containing wastewater.

CAS / MDL: 7647-10-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2020 · IF 5.162

Preparation and catalytic performance of biomass-based solid acid catalyst from Pennisetum sinense for cellulose hydrolysis

Yanqiao Jin,Chunmei Lai,Yunlong Li,Xiansu Cheng

As a kind of lignocellulosic biomass, Pennisetum sinense ( P. sinense ) is commonly used as animal feed, fertilizer or papermaking raw materials. Based on the high carbon content and renewability of P. sinense , we explored the possibility and feasibility of using it as catalyst matrix. The catalyst was produced by sulfonation of char obtained from the carbonization of P. sinense at 550 °C. The structure of the catalyst was characterized by SEM, BET, XRD, FT-IR, XPS and TGA , and its catalytic performance for the hydrolysis of cellulose was investigated in detail. The highest acidity of the catalyst was 3.79 mmol/g and the maximum glucose yield of 59.92% was achieved under optimized conditions. The catalyst also showed a promising reusability. The glucose yield was 53.01% after 5 cycles and as high as 55.92% when using the regenerated catalyst.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2020 · IF 5.162

EDTA-functionalized magnetic chitosan oligosaccharide and carboxymethyl cellulose nanocomposite: Synthesis, characterization, and Pb(II) adsorption performance

Zhenwei Lian,Yanfeng Li,Hongyi Xian,Xiao-kun Ouyang,Yuqing Lu,Xiaowu Peng,Dalin Hu

A novel ethylenediaminetetraacetic acid (EDTA)-functionalized magnetic chitosan oligosaccharide and carboxymethyl cellulose (Fe 3 O 4 @CMCCOS-EDTA) nanocomposite adsorbent was successfully fabricated for Pb(II) adsorption. The adsorbent was characterized by Fourier transform infrared, and X-ray photoelectron spectroscopy was used to confirm successful EDTA modification and Pb(II) adsorption. Scanning electron microscopy, transmission electron microscopy , vibrating sample magnetometer, and thermogravimetric analysis were used to study the morphology and properties of magnetic particles. EDTA modification considerably improved the capacity of the adsorbent. The batch adsorption experiment results indicated that the pseudo-second-order (PSO) model and the Langmuir isotherm model reliably described the adsorption behavior. The maximum adsorption capacity ( q m ) for monolayer chemical adsorption was calculated to be 432.34 mg/g at the pH of 5 and temperature of 308 K. Notably, Fe 3 O 4 @CMCCOS-EDTA exhibited a high Pb(II) removal rate of ~100% using an initial metal ion solution of 100 mg/L and 200 mg/L.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CARBOHYDRATE POLYMERS · 2020 · IF 7.182

Improved mechanical and ultraviolet shielding performances of hydroxyethyl cellulose film by using aramid nanofibers as additives

Jizhen Huang,Zhaoqing Lu,Jiaoyang Li,Doudou Ning,Zhanfan Jin,Qin Ma,Li Hua,Songfeng E,Meiyun Zhang

Recently, aramid nanofibers (ANFs) have drawn the attention of scientist due to the high mechanical strength, high-temperature resistance, and high electrical and thermal insulation properties. In this work, we aimed at improving the mechanical and ultraviolet shielding properties of hydroxyethyl cellulose (HEC) film by using ANFs as additives. Mechanical results show that the 1.0 % ANFs could improve the tensile strength of pure HEC film by 176.6 %. Meanwhile, the ANFs additives can also enable the HEC film excellent ultraviolet (UV) shielding and visible light transmittance, as well as high UV radiation resistance ability. It is believed that the high mechanical strength of the HEC/ANFs composites is derived from the rearrangement of HEC chains along the tensile direction after the addition of hard ANFs and the enhanced hydrogen bonds between HEC and ANFs.

CAS / MDL: 9004-62-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Nano Energy · 2020 · IF 16.602

High-performance nanogenerators based on flexible cellulose nanofibril/MoS2 nanosheet composite piezoelectric films for energy harvesting

Tao Wu,Yiheng Song,Zhuqun Shi,Dongning Liu,Siling Chen,Chuanxi Xiong,Quanling Yang

High-performance and environment-friendly biomass-based piezoelectric films have drawn much attention recently. Here, 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibril (TOCN)/molybdenum disulfide (MoS 2 ) nanosheet bionanocomposite piezoelectric films were prepared through an environmentally benign pathway by aqueous dispersion. The TOCN/MoS 2 nanocomposite films exhibited good mechanical properties with the highest Young’s modulus of 8.2 GPa and tensile strength of 307 MPa. When the MoS 2 content was 4 wt%, the longitudinal piezoelectric constant ( d 33 ) of the composite film reached a maximum value of 31 pC/N, much higher than 12 pC/N of the neat TOCN film and other reported cellulose-based piezoelectric films. Moreover, nanogenerators fabricated from TOCN/MoS 2 composite films exhibited a maximum output voltage of 4.1 V and a short-circuit current of 0.21   μA. Furthermore, the current generated by the nanogenerator was rectified and converted to direct current. A 10   μF commercial capacitor was charged to 1.6 V at 120 s, indicating the ability to collect mechanical energy generated in the natural environment. Therefore, the TOCN/MoS 2 composite films are promising in the field of piezoelectric materials and nanogenerators.

CAS / MDL: 7681-52-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2020 · IF 10.652

Mxene (Ti3C2Tx)/cellulose nanofiber/porous carbon film as free-standing electrode for ultrathin and flexible supercapacitors

Weimin Chen,Daotong Zhang,Kai Yang,Min Luo,Pei Yang,Xiaoyan Zhou

Traditional porous carbon (PC)-based supercapacitors (SCs) are generally stiff and heavy owing to their rigid components and bulky additives, such as binders, conducting materials, and current collectors. Herein, a porous (574.5 m 2 g −1 ), conductive (83.1 S cm −1 ), and flexible MXene (Ti 3 C 2 T x )/cellulose nanofiber (CNF)/PC hybrid film is prepared by strong interfacial interactions among its components via a facile vacuum-filtration method. Three-dimensional PC provides abundant micropores for charge storage and considerable amount of meso/macropores for fast diffusion of ions. Two-dimensional Ti 3 C 2 T x offers a significantly high conductivity of 2.6 × 10 3 S cm −1 and a good film-forming ability. A one-dimensional CNF ensures high mechanical properties with a tensile strength of 38.6 MPa for the hybrid film by binding the adjacent Ti 3 C 2 T x flakes and PC. Additionally, the presence of CNF and PC increases the interlayer distance between Ti 3 C 2 T x flakes, thereby providing more ion-accessible surface areas on Ti 3 C 2 T x and creating open gaps for fast ion transport. Benefiting from these electrochemically attractive properties, this film is further employed as a free-standing electrode to fabricate a high-performance quasi-solid-state SC, which demonstrates an ultrathin thickness of 0.2 mm, a high flexibility, a significantly high areal capacitance of 143 mF cm −2 at 0.1 mA cm −2 , and a large areal energy density of 2.4 μWh cm −2 at 17.5 μW cm −2 , with a high retention of ~50% even after increasing the power density by ~100 fold. This work will pave the way for developing free-standing MXene-based hybrid films that simultaneously possess excellent conductivity, good mechanical properties, and large charge storage capacity for flexible and high-performance SCs.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CARBOHYDRATE POLYMERS · 2021 · IF 9.381

Superhydrophobic cellulose acetate/multiwalled carbon nanotube monolith with fiber cluster network for selective oil/water separation

Xin Zhang,Bingzhong Wang,Bo Wang,Yuezhan Feng,Wenjuan Han,Chuntai Liu,Changyu Shen

Porous cellulose acetate/carboxylated multiwalled carbon nanotubes (CA/OMWNTs) monolith with superhydrophobicity (155°) and superoleophilicity (∼0°) was first prepared using a facile and green phase separation method. Benefiting from the unique three-dimensional (3D) fiber cluster network structure, the as-prepared CA/OMWNTs monolith reveals a high porosity (93.7 %) and a large specific surface area (85.36 m 2 /g). As an oil adsorption material, the superhydrophobic porous monolith is able to adsorb the different kinds of organic solvents and oils from water efficiently and selectively with saturated adsorption capacities from 7.39 to 19.84 g g −1 . Moreover, the porous monolith exhibits an excellent durability with the highly stable wettability and oil/water separation no matter at different pH (1–14) conditions or extreme temperatures (−20−160 °C). Besides, the CA/OMWNTs monolith also could continuously and rapidly separate oils/organic solvents from oil/water mixtures via a simple and home-made pump-assisted adsorption device, showing potential application in large-area remediation of oily wastewater.

CAS / MDL: 7440-70-2
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2020 · IF 16.683

One-step efficient non-hydrogen conversion of cellulose into γ-valerolactone over AgPW/CoNi@NG composite

Shanhui Zhu,Huan Liu,Sen Wang,Xiaoqing Gao,Pengfei Wang,Jianguo Wang,Weibin Fan

One-step efficient conversion of cellulose into value-added γ-valerolactone (GVL) is of great interest because it not only integrates complex tandem reactions in one-step, but also does not need additional hydrogen sources. To achieve this goal, it is crucial to fabricate high-performance catalyst that can accelerate both hydrolysis of cellulose and further transformation of generated stoichiometric levulinic acid (LA) and formic acid (FA) into GVL. CoNi nanoparticles encapsulated in N-doped thin graphene shell gave GVL yield as high as 55.9 % at 200 °C combined with Ag + -exchanged heteropolyacid (AgPW). This composite catalyst is highly resistant to the corrosion of LA and FA, and hence shows high catalytic stability. LA-adsorption FTIR spectra and DFT calculations indicate that LA and FA can penetrate through shell graphene layers into core CoNi sites via cracks. Compared to H 2 , FA can much more rapidly reduce LA because of its low dissociation energy barrier and high dissociation rate.

CAS / MDL: 25249-54-1 9003-39-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。