FUEL PROCESSING TECHNOLOGY
·
2025
·
IF 7.7
Yi Lin,Yulong Wang,Hongxiang Huang,Feng Wang,Zaixing Wang,Shi Jiang,Xiaoqin Liu,Yu Guo
This study focuses on a Pt-promoted Ni/NiAl (Ni/NiO-Al 2 O 3 ) catalyst for butane steam reforming, designed to overcome hydrothermal oxidation and sulfur poisoning in Ni-based systems. A series of Ni/Al (Ni/Al 2 O 3 ) and Ni/NiO-Al 2 O 3 catalysts, with and without Pt modification, were synthesized and systematically evaluated under severe reforming conditions. Compared with conventional Ni/Al, Ni/NiAl exhibited stronger metal-support interaction through NiAl 2 O 4 formation but suffered rapid deactivation in steam-rich and sulfur-containing atmospheres. Incorporating 0.5 wt% Pt markedly improved stability, maintaining high activity and hydrogen selectivity during both steam and H 2 S exposure. Characterization by XRD, TEM, H 2 -TPR, and XPS revealed that Pt induces a synergistic protection mechanism, in which hydrogen spillover dynamically regenerates oxidized Ni species and weakens Ni S interactions. This effect reduces sulfur coverage on active Ni sites, preserving highly dispersed metallic Ni 0 . Time-resolved outlet gas analysis further indicated that sulfur preferentially deactivates reforming sites, followed by progressive inhibition of the water-gas shift reaction via a COS-mediated pathway. The catalyst demonstrated excellent stability under 5 ppm H 2 S at 850 °C, confirming the dual protective role of Pt against oxidation and sulfur poisoning. These findings provide mechanistic insights and design principles for robust, regenerable Ni-based catalysts tailored for distributed hydrogen production from LPG.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2024
·
IF 6.7
Youbin Zheng,Ze Li,Hao Guo,Cunyin Liu,Yuefeng Chen,Xiumei Han,Liang Dong,Jianbing Zang
Hydrogen evolution reaction (HER) is considered as an effective pathway for hydrogen production. Herein, to obtain efficient HER catalyst, density functional theory is employed to figure out the optimal candidate for nickel sulfide. Guided by the mechanistic screening, the highly active HER electrocatalyst, Co-substituted Ni 3 S 4 , is synthesized by one-step hydrothermal method, resembling a vesicle composed of a broken spherical membrane and encapsulated clusters of nanospheres. Cracks on membrane provide a rational entry for reactant molecules to be enclosed in the vesicle. Additionally, the enhanced intrinsic activity also attributes to the upward shift of the d-band center. From the reaction energy diagrams, the decomposition of H 2 O* is confirmed as the rate-determining step (RDS) and the energy required for the RDS is efficiently lowered by the elevated d-band center, which made the catalyst achieves 185 mV overpotential at 100 mA·cm −2 and 38 mV at 20 mA·cm −2 lower than utmost Co-Ni-S relative electrocatalyst.
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Qi Chai,Bo Yang,XiuMin Li,Fengfeng Gao,Xiaogang Hao
A nickel hydroxide/carbon black/polyvinylidene fluoride (Ni(OH) 2 /CB/PVDF) film was coated on a graphite plate substrate and used for the selective and efficient extraction of W(VI) using self-driven film adsorption. The excellent self-driven adsorption performance of Ni(OH) 2 /CB/PVDF film for W(VI) was demonstrated by the comparison of the experimental performance of film adsorption and electrochemically switched ion exchange (ESIX) process. In the Ni(OH) 2 /CB/PVDF film, the adsorption of W(VI) by Ni(OH) 2 was achieved through the ligand exchange reaction with W(VI) and abundant hydroxyl groups, which ensured the self-driven performance. The adsorption capacity of the self-driven Ni(OH) 2 /CB/PVDF film for W(VI) under neutral conditions could reach up to 37.53 mg·g −1 after 12 h. Moreover, the adsorption kinetics and adsorption thermodynamics showed that the adsorption of W(VI) on Ni(OH) 2 /CB/PVDF films was more in line with the pseudo-second-order kinetic model, and the adsorption was heat-absorbing and spontaneous. After seven cycles of adsorption/desorption, the adsorption capacity of W(VI) by Ni(OH) 2 /CB/PVDF film could reach 79.37 % of its initial value, which showed good adsorption/desorption cycle performance. Moreover, Ni(OH) 2 /CB/PVDF films showed high selectivity for W(VI) when WO 4 2− coexisted with Cl − , NO 3 – , and SO 4 2− , respectively. This study confirmed that the self-driven Ni(OH) 2 /CB/PVDF film had efficient and stable adsorption performance for W(VI), which can be regarded as a promising method for the selective adsorption of W(VI) from aqueous solution.
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Feng Ye,Yakun Yang,Shijie An,Peng Liu,Yanpeng Cao,Yuancheng Feng,La Ta,Chao Xu,Xin Xia
Ni-based phosphides are a kind of promising electrocatalyst for the hydrogen evolution reaction (HER). However, the catalytic activity of phosphides still needs further improvement. Herein, with the incorporation of Co, highly dispersed spherical NiCoP supported on graphene nanosheets (NiCoP/GR) as HER catalyst was successfully prepared by the simple impregnation and phosphorization method. The highly-dispersed morphology and the synergetic interaction between NiCo bimetal endow the as-prepared NiCoP/GR with high catalytic performance for HER. When the current density is 10 mA cm −2 in 0.5 M H 2 SO 4 , the as-prepared NiCoP/GR exhibited a low overpotential of 195 mV, and the Tafel slope was only 66.4 mV dec −1 . Furthermore, the density functional theory (DFT) calculations reveal that the low activation barrier of NiCoP/GR can be ascribed to the adjustment of electronic structure. As a result, the HER catalytic performance of NiCoP/GR is significantly enhanced by electronic structure adjustment. This work provides a new approach for introducing multiple metal elements and graphene support material with unique properties to boost the catalytic performance of transition metal phosphide catalysts.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Mohan Huang,Kun Zhao,Zhiying Bai,Dawei He,Jiaqi He,Yongsheng Wang
To design and construct high-performance asymmetric supercapacitors (ASC), we use the same Fe-based metal-organic framework (MIL-88A) as the precursor for the first time to prepare iron-cobalt-nickel ternary metal hydroxides (Fe-Co-Ni-OH) and Fe 2 O 3 compounded with reduced graphene oxide (Fe 2 O 3 /RGO-1). As a positive electrode, Fe-Co-Ni-OH has a specific capacitance of 1065 F g −1 at 1 A g −1 and exhibits excellent rate performance and cycle stability due to its unique spindle-like structure of the surface growth nanosheets and the synergistic effect between the three metals. The introduction of RGO effectively connects the independent spindle-like Fe 2 O 3 and enhances the conductivity and structural stability of the material. So that the Fe 2 O 3 /RGO-1 negative electrode has a specific capacitance of 734 F g −1 at 1 A g −1 , and its cycle stability is significantly improved compared with the single Fe 2 O 3 (increasing from 64 % to 85 %). The constructed Fe-Co-Ni-OH//Fe 2 O 3 /RGO-1 ASC possesses a satisfactory energy density of 43.11 Wh kg −1 at a power density of 800 W kg −1 , which is superior to parts constructed with similar material compositions in the same period. This research provides a new perspective for developing high-performance, low-cost, and environmentally friendly green energy storage devices.
✓ 已验证
DOI
高影响因子
CURRENT MEDICINAL CHEMISTRY
·
2024
·
IF 3.5
Cheng Xiaomei,Liu Chang,Cai Yuanyuan,Li Xiangzi,Zhao Ruirui,Feng Yan,Wang Meifang
Background: Nickel nanomaterials play an important role in biological applications,
but they have high toxicity and poor biocompatibility. To overcome these defects,
we coated the surface of Ni nanotubes with different thicknesses of SiO2 to reduce
cytotoxicity, improve biocompatibility, and broaden their biological application value.
Objective: This study aimed to construct Ni nanotubes with different thicknesses of SiO2
nanoshells; investigate the effects of silicon layer thickness, incubation time, and cell
line category on the cytotoxicity of the as-synthesized materials, and evaluate the biocompatibility
of the materials by biological enzymes. The Ni@SiO2-NH2 was selected
for use as an adsorbent for the adsorption and purification of histidine-rich proteins,
such as Bovine Hemoglobin (BHb).
Methods: Magnetic Ni nanotubes were prepared by the template-chemical deposition
method. A modified version of the Stöber process was used for the SiO2 coating of
Ni@SiO2 nanotubes, and adjusted by changing the volume of TEOS for different thicknesses
of SiO2 nanoshells.
Results: Different cell lines containing tumor cells and normal cells were used in the
toxicity experiment, which confirmed the low cytotoxicity and good biocompatibility of
Ni@SiO2. To achieve high efficiency of immobilization and purification of histidine-
rich proteins, Ni@SiO2-NH2 was obtained by introducing the amino functional
group. The Ni@SiO2-NH2 was found to possess lower cytotoxicity and higher adsorption
capacity compared to other synthesized materials. Besides, the Ni@SiO2-NH2 also
exhibited good selectivity of histidine-rich proteins.
Conclusion: This work has not only provided ideas for reducing the cytotoxicity and improving
the biocompatibility of biological nanomaterials, but also laid a foundation for
subsequent biological applications.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2020
·
IF 4.65
Hongtao Zou,Shiliang Zhang,Xiaoling Hong,Qilu Yao,Yan Luo,Zhang-Hui Lu
As an ideal hydrogen supplier in liquid phase, hydrous hydrazine has gained a lot of attention for safe and efficient storage as well as transportation of hydrogen. Herein, a low Pt-containing Ni–Pt bimetallic catalyst immobilized on novel MIL-101/rGO composite has been prepared by a facile impregnation-reduction approach. Unexpectedly, the resultant Ni 0.9 Pt 0.1 /MIL-101/rGO catalyst exhibits optimal catalytic performance and 100% H 2 selectivity for hydrogen evolution from hydrous hydrazine under alkaline conditions at 323 K, giving a turnover frequency (TOF) value of 960.0 h −1 , which is a relatively higher value ever reported heterogeneous catalysts. Even at room temperature, Ni 0.9 Pt 0.1 /MIL-101/rGO catalyst shows excellent catalytic activity for dehydrogenation of hydrazine as well as hydrazine borane. In addition, the Ni 0.9 Pt 0.1 /MIL-101/rGO catalyst also exhibits excellent durability. Even after eight recycles, the catalytic activity is no significant decrease, and the H 2 selectivity still remains 100%.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Zhimin Lv,Yifeng Zhang,Ming Fang,Xiaoli Tan
Exploring high-efficiency and low-cost catalysts for reducing Cr(VI) is one of the key problems in solving Cr(VI)-containing wastewater. In this paper, bimetallic Ni- and Co-based carbon sphere (Ni x Co y @NCS) was prepared by a simple hydrothermal-pyrolysis route, in which Ni-Co nanoalloys were uniformly dispersed on N -doped carbon sphere with average nanoparticles of 37.5 nm. The catalytic reduction performance of the hybrid catalyst Ni x Co y @NCS for Cr(VI) can be optimized by manipulation stoichiometry, and the catalytic ability of the Ni 1 Co 1 @NCS was much higher than that of other samples. This is because the synergy between Co and Ni NPs promotes the dehydrogenation efficiency of formic acid and the N doping improves the electron transport efficiency of the catalyst, and the strong protection of N -doped carbon for NPs ensured its excellent recycling ability and durability. In the existence of coexisting ions, the catalytic efficiency of the Ni 1 Co 1 @NCS is not affected at all. The reduction mechanism is mainly because of the active hydrogen during the dehydrogenation pathway of formic acid. This paper demonstrates that bimetallic Ni-Co-based materials have higher catalytic capacity than monometallic Ni or co-based materials.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2013
·
IF 3.41
Qiying Liu,Hualiang Zuo,Tiejun Wang,Longlong Ma,Qi Zhang
Nano-sized SAPO-11s were hydrothermally synthesized with using di-n-propylamine (DPA) as structure-directing agent in mixed n-tetradecanoamine–n-propanol–H 2 O medium and the Ni/SAPO-11 catalysts were prepared by incipient wetness impregnation. The catalysts was characterized by XRD, SEM, BET, H 2 -TPR, NH 3 -TPD and TG techniques and their catalytic performance was tested in hydrodeoxygenation (HDO) of palm oil to hydrocarbon fuels. Surfactant n-tetradecanoamine could mediate the minimum SAPO-11 sizes into 20–50 nm. As comparing to the commercial SAPO-11, the nano-sized SAPO-11s presented significantly enlarged surfaces and mesoporous volumes, which offered sufficient space and strong interactions for dispersing Ni. One-step HDO of palm oil demonstrated that the nano-sized SAPO-1 supported Ni catalysts showed the high yield (80%) of liquid hydrocarbons, high isomerization selectivity (80%) and excellent stability due to that the catalyst presented appropriate acidity, higher Ni dispersity, balance of metal (Ni) and acid (SAPO-11) functionalities and fast diffusion for bulky palm oil and products. These promotion effects observed over the nano-sized SAPO-11 supported Ni catalysts indicated the potential application in biorefinery of vegetable oils to hydrocarbon fuels.
✓ 已验证
DOI
高影响因子
NANOTECHNOLOGY
·
2021
·Vol. 32
·期 33
·335603
·
IF 3.874
Baige Yuan,Jun Li,Manman Xia,Ying Zhang,Ruyan Lei,Peng Zhao,Xiao Li
Hollow-structured NiO + Ni nanofibers wrapped by graphene were designed and successfully fabricated via a simple method. First, solid NiO + Ni nanofibers were prepared by electrospinning followed by calcination. Here, a portion of the metallic Ni was retained to improve the electrochemical performance of NiO by adjusting the calcination temperature. Next, the nanofibers were thoroughly mixed with different amounts of graphene and calcinated once more to form hollow-structured NiO + Ni nanofibers with an extremely high specific surface via the reaction between graphene and NiO on the nanofiber surface and subsequent migration of NiO into the nanofibers. Results showed that the obtained hollow-structured NiO + Ni electrode demonstrates optimal electrochemical performance when the graphene content is controlled to 3 wt%. The first cycle discharge/charge specific capacity of the electrode peaked (1596/1181 mAh · g−1 ) at 100 mA · g−1, with a coulombic efficiency of approximately 74% (60% for 0 wt% graphene, 65% for 1 wt% graphene, and 51% for 4 wt% graphene). It also presented excellent cycling stability after 100 cycles at 100 mA · g−1 on account of its high retained discharge specific capacity (251 mAh · g−1 for 0 wt% graphene, 385 mAh · g−1 for 1 wt% graphene, 741 mAh · g−1 for 3 wt% graphene, and 367 mAh · g−1 for 4 wt% graphene). Moreover, the synthesized electrode possessed outstanding rate capability owing to its large average discharge specific capacity of approximately 546 mAh · g−1 (45 mAh · g−1 for 0 wt% graphene, 256 mAh · g−1 for 1 wt% graphene, and 174 mAh · g−1 for 4 wt% graphene) from 100 mA · g−1 to 2000 mA · g−1. The observed improvement in electrochemical performance could be attributed to the increase in active sites and decrease in charge transport distance in the hollow-structured NiO + Ni nanofibers. Excessive introduction of graphene caused a sharp loss in electrochemical performance due to the agglomeration of graphene sheets on the nanofiber surfaces.
✓ 已验证
DOI
高影响因子
ENERGY & FUELS
·
2020
·
IF 3.421
Fanghui Wang,Yimeng Luo,Yajun Zhang,Yanan Wang,Hong Zhu
A NiO–Ni foam composite carrier was prepared by the hydrothermal method. Ruthenium metal was supported on the NiO–Ni foam by electroplating, obtaining a highly active bush-like Ru/NiO–Ni foam catalyst. To investigate the effect of NiO on the structure and performance of the catalyst, a Ru/Ni foam catalyst was prepared as a reference. The structures of the carrier and both catalysts were characterized by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy, and the performances of both catalysts were evaluated in alcoholytic hydrogen production from sodium borohydride. On the carrier with the NiO-treated surface, the active component Ru developed a three-dimensional bush-like structure that enhanced the catalytic activity. Indeed, the hydrogen production from alcoholysis of sodium borohydride was three times higher on the Ru/NiO–Ni foam catalyst than on the Ru/Ni foam catalyst, and the highest rate exceeded 6 L/g/min. The repeated-use stability of the Ru/NiO–Ni catalyst (10 times) also exceeded that of Ru/Ni foam (8 times). However, as both catalysts used the same active component (i.e., Ru), their activation energies were almost identical.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2018
·
IF 4.229
Jiqiong Lian,Yihui Wu,Houan Zhang,Siyong Gu,Zhiwei Zeng,Xiaoyun Ye
Design of inexpensive and highly efficient bifunctional electrocatalyst is paramount for overall water splitting . In this study, amorphous Ni–Fe–P alloy was successfully synthesized by one-step direct-current electrodeposition method. The performance of Ni–Fe–P alloy as a bifunctional electrocatalyst toward both hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) was evaluated in 30 wt% KOH solution. It was found that Ni–Fe–P alloy exhibits excellent HER and OER performances, which delivers a current density of 10 mA cm −2 at overpotential of ∼335 mV for HER and ∼309 mV for OER with Tafel slopes of 63.7 and 79.4 mV dec −1 , respectively. Moreover, the electrolyzer only needs a cell voltage of ∼1.62 V to achieve 10 mA cm −2 for overall water splitting. The excellent electrocatalytic performance of Ni–Fe–P alloy is attributed to its electrochemically active constituents, amorphous structure, and the conductive Cu Foil.
✓ 已验证
DOI
高影响因子