ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2026
·
IF 4.1
Wei Ruxia,Sheng Wei,Chen Shengyu,Zheng Yiwei,Li Xu,Feng Na,Luo Yanni,Tan Xuecai,Huang Ke-Jing
The development of highly sensitive and selective platforms for trace Zn 2+ detection is crucial for environmental monitoring and biomedical diagnostics. Herein, a photoelectrochemical (PEC) sensor was constructed using an L-cysteine (L-Cys)-functionalized BiOBr composite, in which surface-interface engineering was adopted to enrich available recognition sites and modulate the interfacial PEC response. Compared with pristine BiOBr, the incorporation of L-Cys introduces abundant Zn 2+ binding functional groups and modifies the local surface environment of BiOBr, thereby enhancing the photocurrent response and enabling the selective recognition of Zn 2+ . The sensor operates through a signal-off mechanism, in which the coordination of Zn 2+ with surface-bound L-Cys forms an interfacial coordination layer that partially hinders mass transport and interfacial charge transfer, resulting in a decrease in photocurrent. Under optimized conditions, the platform exhibits a wide linear response ranging from 0.5 to 40 nmol/L, with a low detection limit of 2.69 nmol/L ( S / N = 3). Furthermore, the applicability of the sensor is validated in real-world scenarios, demonstrating excellent recoveries in tap water, lake water, and complex biological matrices such as HepG2 cell lysates (recoveries, 96.3–108.5%). This work provides a robust strategy for engineering bio-semiconductor interfaces for the detection of essential metal ions in complicated samples.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 19
·1466
·
IF 3.2
Valabhoju Madhuker,Pothukanuri Nagaraju,Kathirvelu Velavan,Parne Saidi Reddy
Titanium-based metal–organic frameworks (Ti-BDC MOFs) were synthesized via a solvothermal route at different temperatures ranging from 110 to 170 °C using terephthalic acid as the organic linker. The synthesized samples were systematically characterized using X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible spectroscopy (UV–Vis), Brunauer–Emmett–Teller (BET) surface area analysis, and thermogravimetric analysis (TGA) to investigate their structural, morphological, optical, and thermal properties. X-ray diffraction (XRD) studies revealed temperature-dependent variations in crystallinity and phase evolution, while FESEM analysis demonstrated significant morphological transformations with increasing synthesis temperature. EDX confirmed the presence of Ti, O, and C elements, validating the successful formation of the Ti-BDC framework. FTIR spectra verified the coordination between Ti metal centers and BDC linkers, whereas TGA indicated good thermal stability with framework integrity maintained up to approximately 280 °C. Ultraviolet–visible studies were employed to determine the optical band gap, and BET analysis revealed the microporous and hierarchical porous nature of the synthesized materials. Gas sensing characteristics toward n-butanol were evaluated under ambient conditions using the static liquid distribution method. Among all samples, the Ti-BDC MOF synthesized at 150 °C exhibited the best sensing performance toward 5 ppm n-butanol, showing superior response–recovery behavior, excellent selectivity, and long-term stability, with a limit of detection (LOD) of 2.66 ppm. The enhanced sensing performance is attributed to the optimized crystallinity, porous architecture, and abundant active adsorption sites that facilitate efficient gas diffusion and charge transfer processes. These findings demonstrate the potential of Ti-BDC MOFs as promising sensing materials for low-concentration n-butanol detection in environmental monitoring and workplace safety applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 4.4
Yang Shengdu,Meng Yuchan,Chen Ding,Sun Xin,Zhao Xiaohai
Stereo-complexed poly(lactic acid) (PLA) membranes are highly attractive for sustainable applications, yet achieving a synergy between mechanical strength and superhydrophobicity remains a significant challenge. Herein, a hierarchical crystallization strategy was developed to fabricate high-performance stereo-complexed PLLA/PDLA/ZnO porous composite membranes by integrating methacryloxypropyltrimethoxysilane (MPS)-modified ZnO nanoparticles (NPs). By optimizing the MPS-ZnO content within a 9:1 PLLA/PDLA blending matrix, a remarkable 182% increase in tensile strength (from 2.14 to 6.05 MPa) was achieved, while simultaneously attaining stable superhydrophobicity with a water contact angle of 155.4°. Both differential scanning calorimetry (DSC) and X-ray diffraction (XRD) results revealed that MPS-ZnO NPs function as efficient heterogeneous nucleating agents, significantly enhancing stereo-complex (SC) crystallization. Crucially, a “dual-directional traction force” was proposed as a possible mechanism at the molecular level, i.e., the concurrent growth of SC and HC (homo-crystallization) phases induces a confined, oriented crystalline state in the intermediate polymer chains. This unique structure assumption effectively establishes potential correlations in the connection between varying crystalline phases. Furthermore, the composite membranes displayed improved thermal insulation, with thermal conductivity decreasing to 0.055.6 W m −1 K −1 due to enhanced phonon scattering at the complex hierarchical interfaces. This work provides a versatile approach for designing biodegradable functional membranes with superior structural integrity and tailored surface properties for advanced filtration and insulation. Graphical
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 4.4
Hu Qing,Wu Haiyi,Shi Ling,Yao Zhenhua,Jin Fang,Hu Maocong
This study investigates the synergistic effects of pyrolysis temperature and sulfur doping on the structure and oxygen reduction reaction (ORR) performance of cobalt-based catalysts derived from metal–organic frameworks. Using thiourea as the sulfur source, a series of Co-NSC catalysts were synthesized at different temperatures (750–1050 °C). The results demonstrate that sulfur doping effectively inhibits metal agglomeration by forming Co–S coordination bonds, while an optimal pyrolysis temperature (850 °C) balances defect density, pore structure, and active-site distribution. Among all samples, Co-NSC-850 exhibits favorable ORR activity in alkaline medium, with a half-wave potential of 0.852 V, an electron transfer number close to 4, and H 2 O 2 selectivity below 5%. When applied in zinc-air batteries, Co-NSC-850 delivers a power density of 254.22 mW cm −2 , a small charge–discharge gap (1.02 V), a specific capacity of 809.18 mAh g −1 , and a cycle life of 220 h, comparable to or better than commercial Pt/C. This work provides valuable insights for designing high-performance non-noble metal ORR catalysts through cooperative regulation of temperature and heteroatom doping. Graphical abstract
✓ 已验证
DOI
高影响因子
COLLOID AND POLYMER SCIENCE
·
2026
·
IF 2.9
Li Xin,Yu Shengming,Zhao Cailing,Song Kun,Jiang Yan,Zhang Hongwen
Owing to the numerous hazards associated with oily wastewater, superhydrophobic materials desirable for oil-water separation have attracted considerable attention. Herein, a double hydrophobic polyhedral oligomeric silsesquioxane-polystyrene (POSS-(PS) 8 ) star-shaped copolymer was synthesized by atom transfer radical polymerization (ATRP). The superhydrophobic coating for oil-water separation was prepared by PDMS anchoring POSS-(PS) 8 on the surface of cotton fabric (CF) through nonsolvent induced assembly. The influence of POSS-(PS) 8 and PDMS solution concentration on the optical properties and durability of result superhydrophobic coating were evaluated. Notably, the optimal PDMS dosage endows the superhydrophobic coating with both high optical transmittance (88.4 ± 0.3%) and high haze (87.6 ± 0.6%). Furthermore, the superhydrophobic cotton fabric (SCF) was investigated revealing it has the ability to efficiently separate various oil-water mixtures due to its superhydrophobicity, and maintain good separation efficiency even after 30 cycles. This work will provide a feasible strategy for potential application of the low cost and environmentally friendly SCF in oil-water separation.
✓ 已验证
DOI
高影响因子
Journal of Food Measurement and Characterization
·
2026
·
IF 3.6
Luo Jia-wei,Xiao Shan,Chen Xuan,Zeng Pu-sheng,Gao Ning,Wang Ji-hui
In this study, a composite deodorization method combining β-cyclodextrin (β-CD) and Hanseniaspora opuntiae was developed to eliminate the fishy odor in shrimp meat. The deodorization process was optimized using one-way and response surface methodologies, with optimal conditions of 8.3% β-CD, 7.27% Hanseniaspora opuntiae , 82.75 min of deodorization time, and a temperature of 29.42 °C. Under these conditions, trimethylamine, the primary contributor to the fishy odor, was reduced to 11.22 mg/kg. Comparative analysis of physical deodorization (PT), microbial deodorization (MT), and combined deodorization (MxT) showed that MxT was the most effective. The MxT method reduced the relative signals of several fishy odor-related volatiles, including aldehydes, ketones, and sulfur-containing compounds, while enhancing fruity and floral aroma-related volatiles. Furthermore, sensory analysis revealed improvements in umami, richness, and freshness, along with reductions in bitterness and astringency. Electronic tongue, partial least squares discriminant analysis, and correlation analysis confirmed significant relationships between free amino acids, volatile compounds, and sensory attributes, further validating the effectiveness of MxT. Overall, the β-CD– Hanseniaspora opuntiae method not only reduced fishy odors but also improved the overall quality and sensory characteristics of shrimp meat, offering potential for high-quality shrimp product development and seafood processing. Graphical The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2026
·Vol. 156
·期 7
·191
·
IF 2.5
Liu Yubing,Tang Jie,Cai Chenyu,Gu Runjing,Yang Xinyu,Yue Liang,Bai Yiqiang,Zhang Fengxiao,Liang Jing,Xu Naizhang,Fan Yining
CeO 2 -supported Au and Pd nanocatalyst (Au-Pd/CeO 2 ) was developed and used in the oxidation of 1,2-propanediol (1,2-PDO). Notably, by tuning catalyst composition and reaction conditions, the product selectivity could be well controlled to produce lactic acid (LA) majorly, which was one of the top twelve bio-based platform molecules with very broad application scopes. The catalyst with Pd/(Au + Pd) molar ratio at 0.25 should be the preferable catalyst was screened out to be preferable, affording LA in 92.0% selectivity, while 88.0% of 1,2-PDO was converted under mild reaction conditions (0.3 MPa of O 2 at 80 °C for 3 h). The superior catalytic activities of Au-Pd/CeO 2 probably attributed to the strong interactions between Au and Pd nano particles (NPs), as being reflected by High resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectra (XPS) characterizations. Moreover, strong interactions between Au and Pd NPs making it easy to generate active oxygen species. Superoxide radicals can oxide the first hydroxyl group of 1,2-PDO to carboxyl group, while H 2 O 2 can easy caused C-C bond breaks and generate unwanted by-products. Graphical The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED ELECTROCHEMISTRY
·
2026
·Vol. 56
·期 7
·143
·
IF 3.7
Cheng Xiaorong,Ji Tong,Chen Jingtian,Chang Qingran,Yuan Tianyang,Han Yuxuan,Hu Yemin,Cai Huimin,Dawson Graham
This work reported a novel composite photocathode consisting of Mn 0.2 Cd 0.8 S (MCS) deposited on pyramid-textured silicon for efficient solar hydrogen evolution. The MCS layer was synthesized via a hydrothermal route and deposited onto pyramid-textured silicon by a simple drop-coating method. The optimized Si/MCS-3 (3 drop-coating times) photocathode demonstrated a remarkable photocurrent density of −16.20 mA cm −2 at −0.80 V NHE , which was 33 times higher than that of bare silicon, along with a positively shifted onset potential (0.19 V NHE ). Enhanced performance was attributed to improved light harvesting, favorable band alignment, and efficient charge separation at the Si/MCS interface. Furthermore, the MCS coating served as a protective layer, ensuring excellent stability over 60 h of continuous hydrogen evolution reaction (HER). Graphical abstract The alternative text for this image may have been generated using AI. The optimized Si/MCS-3 (3 drop-coating times) photocathode demonstrated a remarkable photocurrent density of -16.20 mA cm-2 at -0.80 VNHE, which was 33 times higher than that of bare silicon, along with a positively shifted onset potential (0.19 VNHE).
✓ 已验证
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Chen Yuxin,Xu Xing,Zeng Jianrong,Yu Yang,Ma Yingshuai,Zhang Peilin,Zeng Tao,Zhang Haiguang,Tang Liang,Liu Runzeng,Zhu Youcai
Direct electron transfer (ETP) during peroxymonosulfate (PMS) activation enables selective, matrix-resistant organic contaminants oxidation, yet its precise control over competing radical pathways remains elusive. Here we report a nano-island-like single-atom catalyst- carbon nitride islands immobilize cobalt single atoms on reduced graphene oxide (CoN 3 C/rGO)- that leverages an island-sea architecture to direct PMS activation toward ETP. Experimental and density functional theory (DFT) analyses show an rGO induced elevation of the Co d -band center and a sharpened d z2 orbital near the Fermi level, promoting directional hybridization with PMS p orbitals and suppressing antibonding occupation. Consequently, CoN 3 C/rGO/PMS degrade bisphenol A (BPA) completely within 5 min, with ~94% contribution from ETP. Furthermore, catalytic membrane coatings enable stable 100 h continuous operation in diverse real water matrices with minimal Co leaching. Our results demonstrate a design principle-orbital-level modulation via island-sea architectures to reconcile activity and selectivity in Fenton-like systems and advance translating practical water treatment technologies based on single-atom electronic control.
✓ 已验证
DOI
PubMed
高影响因子
Nano-Micro Letters
·
2026
·Vol. 18
·期 1
·384
·
IF 38.5
Qiu Shuilai,Xu Jingyao,Shi Congling,Zhang Laibin
A gradient laminated architecture is engineered to resolve the intrinsic trade
off between thermal insulation and impact toughness via synergistic
ceramization.
The composite exhibits exceptional fatigue resistance with 93% stress
retention and stable elasticity across a wid e temperature range ( from 40 to 300 °C).
The formed dense ceramic barrier effectively intercepts high pressure gas
jets, confining thermal runaway to a single cell in battery modules.
✓ 已验证
DOI
PubMed
高影响因子
COLLOID AND POLYMER SCIENCE
·
2026
·
IF 2.9
Li Wen,Zhang Menghan,Zhang Yi,Tan Yu,Mao Xinyue,Zhang Yaping,Liu Bo,Ma Hanbing
The volume of discarded thermosetting epoxy composites is increasing. Traditional landfill disposal not only pollutes the environment, but also generates significant resource waste. Promoting their degradation and recycling has emerged as a critical problem for industry sustainability. This work uses ester-based epoxy resins as monomers to rapidly degrade thermosetting ester-epoxy/amine cures in mild circumstances. After concentration and filtration, components such ethylene glycol, sodium carboxylate salts, and nitrogen-containing polyols can be easily extracted from the degradation solution. Specifically, sodium carboxylate salts can be re-synthesized into epoxy resins with identical molecular structures to the original epoxy resin via acidification and epoxidization. Purified regenerated nitrogen-containing polyols combine with diphenyl phosphonyl chloride to form a new flame retardant. When incorporated into standard bisphenol A epoxy/anhydride curing systems at a 25 wt% concentration, this flame retardant elevates the flame retardancy rating from non-rated to V-0 compared to untreated epoxy/anhydride cures, the limiting oxygen index reaches 28.7%, while total smoke release decreases by 12.3%. Concurrently, the mechanical properties of the cured material improved, with tensile strength increasing by 32.8% and elongation at break rising by 50.8%, demonstrating excellent overall performance. Building on previous research that demonstrated the rapid deterioration of ester-based epoxy/amine cured materials and the efficient recovery of sodium carboxylate from degradation solutions, this study enhanced the degradation rate of ester-based epoxy/amine cured materials. Simultaneously, nitrogen-containing polyols found in breakdown products were recovered and reused, resulting in complete recovery and usage of all components from ester-based epoxy/amine cured composites.
✓ 已验证
DOI
高影响因子
POLYMER BULLETIN
·
2026
·Vol. 83
·期 8
·423
·
IF 4.2
Zhu Xiaoji,Hou Haohao,Wang Jie,Ma Hui,Zhou Hongfu,Zang Xiaoling,Xiang Aimin
The urgent necessity to create affordable adsorbents for the effective elimination of leftover contaminants from wastewater arises from the significant water pollution resulting from the excessive use of dyes. A novel chitosan (CS) /pullulan (PL) hydrogel, chemically cross-linked using polyethylene glycol diglycidyl ether (PEGDE), exhibited high swelling capacity, excellent mechanical stability, and superior adsorption performance. Adsorption tests indicated that CS/PL-2 hydrogel attained a 93.23% removal efficiency for congo red (CR) dye at the concentration of 1000 mg/L. The adsorption capacity of CS/PL-2 hydrogel was investigated in relation to various factors, such as temperature, initial concentration, pH, contact time, and the quantity of adsorbent used. Adsorption kinetics for CS/PL-2 hydrogel were examined utilizing both pseudo-first-order and pseudo-second-order models, with the findings demonstrating that physical adsorption primarily governed the process. The maximum adsorption capacity identified for CS/PL-2 hydrogel, as the Langmuir model, was observed to be 953.60 mg/g, and the thermodynamic analysis of adsorption suggested that the process occurs spontaneously. After five cycles of adsorption, the removal rate of CS/PL-2 hydrogel remained at 70%. In conclusion, this hydrogel adsorbent offers a practical solution for treating CR contaminated wastewater.
✓ 已验证
DOI
高影响因子