文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3097至3108个,产品总数6,361个

切换升序
cellulose
ACS Omega · 2021 · IF 3.512

Construction of Nanocrystalline Cellulose-Based Composite Fiber Films with Excellent Porosity Performances via an Electrospinning Strategy

Lei Ge,Juanjuan Yin,Dawei Yan,Wei Hong,Tifeng Jiao

Cellulose nanocrystals (CNCs) not only have environmental protection characteristics of being lightweight, degradable, green, and renewable but also have some nanocharacteristics of high strength, large specific surface area, and obvious small size effect, so they are often used as a reinforcing agent in various polymers. However, the hydrogen bonding between CNC molecules is relatively strong, and they can easily aggregate and get entangled with each other. In this work, several large-porosity composite nanofiber films, KH550-CNC/waterborne polyurethane (WPU)/poly(vinyl alcohol) (PVAL) with KH550-modified CNCs, are prepared using poly(vinyl alcohol) (PVAL) solution and electrospinning technology. A variety of characterization methods are used to discuss and analyze the nanofiber materials, and the effects of the added amount of CNCs modified with KH550, spinning voltage, curing distance, and advancing speed on the morphology and performance of composite fibers are discussed separately. The results show that when the content of KH550-CNC is 1%, the composite fiber film obtained has the most regular morphology and the best spinnability, which is convenient for the specific application of fiber materials in a later period. In addition, the porosity of the obtained composite fiber film is 62.61%. Therefore, this work provides a theoretical basis and research strategy for the preparation of higher-porosity composite films as well as the development of new textile materials.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FUEL PROCESSING TECHNOLOGY · 2020 · IF 4.982

Al-modified heteropolyacid facilitates alkyl levulinate production from cellulose and lignocellulosic biomass: Kinetics and mechanism studies

Chaonan Tao,Lincai Peng,Junhua Zhang,Liang He

Efficient production of fuels and chemicals from lignocellulosic biomass is the main goal of biorefinery processes. Herein, the metal-modified heteropolyacids with tunable Lewis and Brønsted acid sites were designed as the monolithic multifunctional catalyst for valorizing cellulose and lignocellulosic biomass to alkyl levulinate, a versatile platform molecule. Among them, Al-exchanged two protons of H 4 SiW 12 O 40 (Al 2/3 H 2 SiW 12 O 40 ) was found to be uniquely effective. The kinetic behavior describing the conversion of cellulose to ethyl levulinate was investigated to monitor the process, and compared between parent H 4 SiW 12 O 40 and Al 2/3 H 2 SiW 12 O 40 to understand the mechanistic role of Al 3+ . The introduction of Al 3+ substantially facilitated cellulose depolymerization and glucose-to-fructose isomerization , leading to a high rate and product selectivity. The estimated activation energies for cellulose degradation and glucopyraoside alcoholysis decreased by 50.6 kJ/mol and 40.9 kJ/mol, respectively. 50–72% yields of ethyl levulinate were accomplished from cellulosic biomasses such as pine wood, eucalyptus, bamboo, bagasse and Napier grass. Al 2/3 H 2 SiW 12 O 40 allowed cellulose conversion in various linear alcohols producing high-yield alkyl levulinate, and could be reused multiple times with a good stability. This study opens a reliable and promising avenue for one-pot transformation of cellulose and raw lignocellulosic biomass to ester compounds.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Omega · 2020 · IF 2.87

Preparation and Properties of Cellulose-Based Films Regenerated from Waste Corrugated Cardboards Using [Amim]Cl/CaCl2

Hao Xu,Lijie Huang,Mingzi Xu,Minghui Qi,Tan Yi,Qi Mo,Hanyu Zhao,Chongxing Huang,Shuangfei Wang,Yang Liu

1-Ally-3-methylimidazolium chloride ([Amim]Cl), dimethyl sulfoxide (DMSO), and CaCl2 were selected to construct dissolution systems to produce value-added products from pretreatment of waste corrugated cardboards (P-WCCs). The dissolution behaviors of P-WCCs before and after ball milling were studied in different dissolution systems. The regenerated cellulose films were quickly and efficiently prepared via dissolving, regenerating, and pressurized drying. When 4 wt % waste corrugated cardboard was dissolved in [Amim]Cl for 4 h at 90 °C, the regenerated cellulose films featured tensile strengths as high as 59.00 MPa. Adding 40% DMSO and 2 wt % CaCl2 increased the tensile strength of the film to a maximum value of 85.86 MPa. This demonstrates that DMSO improves the ability of WCC to dissolve in ionic liquids; Ca2+ improves the tensile strength and thermal stability of the regenerated cellulose film but reduces its transparency. This work provides a new, simple, and highly efficient way to use WCCs for packaging and wrapping.

CAS / MDL: 12501-23-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2020 · IF 8.758

Cellulose-Based Superhydrophobic Surface Decorated with Functional Groups Showing Distinct Wetting Abilities to Manipulate Water Harvesting

Wei Huang,Xiangyu Tang,Zhe Qiu,Wenxin Zhu,Yonggui Wang,You-Liang Zhu,Zefang Xiao,Haigang Wang,Daxin Liang,Jian Li,Yanjun Xie

Inspired by the distinct functions of desert beetles with efficient droplet nucleation and lotus leaves with excellent droplet removal, an integrated method is presented for the design of a superhydrophobic surface decorated with hydrophilic groups that can efficiently nucleate and remove water droplets. We constructed a cellulose-based superhydrophobic surface containing numerous olefin terminal groups by solvent exchange and spray coating. This surface is different from most of the reported biomimicking water harvesting surfaces that rely on complicated lithography and micropatterning techniques requiring special instruments. The obtained superhydrophobic surface was further modified using various thiol compounds via a thiol–ene reaction to manipulate the water harvesting property. The modified surfaces containing hydrophobic groups (e.g., 1-octadecanethiol and 1H,1H,2H,2H-perfluorodecanethiol) or a strong hydrophilic group (e.g., 3-mercaptopropionic acid and 6-mercapto-1-hexanol) exhibited insufficient fog collecting abilities due to poor water droplet nucleation or strong water adhesion. By contrast, the modified surface decorated with moderately hydrophilic amino groups combines the advantages of biological surfaces with distinct wetting features (such as fog-harvesting beetles and water-repellent lotus leaves), resulting in accelerated water nucleation and less compromise of the water removal efficiency. Molecular dynamic simulations revealed that the efficient droplet nucleation is attributed to the hydrophilic amino groups whereas the rapid droplet removal is due to the maintained superhydrophobicity of the amino group-modified surface. This strategy of decorating a superhydrophobic surface with moderately hydrophilic functional groups provides insight into the manipulation of droplet nucleation and removal for water collection efficiency.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2020 · IF 6.182

Enhanced sodium storage kinetics of nitrogen rich cellulose-derived hierarchical porous carbon via subsequent boron doping

Kui Cui,Chao Wang,Yun Luo,Lin Li,Jing Gao,Wenyan Chen,Wenfan Xu,Yinhua Liu,Zhiyuan Ma,Xianfen Wang

Doping engineering is of great importance in adjusting the electronic conductivity, structural defects and energy storage performance of carbonaceous materials. Herein, a stepwise heteroatoms doping engineering is designed to modify cellulose-derived hierarchical porous carbons (HPC) with rich nitrogen (N@HPC) and subsequent boron (B@N@HPC). The effect of boron doping on nitrogen rich HPC is investigated to reveal the evolution of microstructures, porosity, surface area, and chemical groups. It is found that boron doping cannot further change the interlayer distance of nitrogen-rich HPC, but B@N@HPC exhibits excellent electrochemical performance as an anode in sodium ion batteries (SIBs). Compared with N@HPC, B@N@HPC anodes show a larger capacity of 308 mAh g −1 at 0.02 A g −1 , which is 137% larger than that of nitrogen doped HPC. Electrochemical Kinetics analysis through galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS) suggests a capacitive-dominated process combined with a higher Na + diffusion coefficient and lower charge transfer resistance for the B@N@HPC than that of N@HPC. The effect of boron doping on the carbon anodes can be taken to explore an enhanced performance for SIBs.

CAS / MDL: 10043-35-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING · 2020 · IF 6.444

Ultra-thin and highly flexible cellulose nanofiber/silver nanowire conductive paper for effective electromagnetic interference shielding

Yiming Chen,Liang Pang,Yang Li,Heng Luo,Gaigai Duan,Changtong Mei,Wenhui Xu,Wei Zhou,Kunming Liu,Shaohua Jiang

Exploring an electromagnetic interference (EMI) shielding material with lightweight, flexible and easy fabricating process to deal with the increasingly serious electromagnetic environment pollution has become a current developing trend. Here, we reported a novel cellulose nanofiber (CNF)/silver nanowire (AgNW) conductive paper with a distinctive hierarchical structure by a facile “blending-filtration-peeling” process. Results showed that the obtained paper with a thickness of ~40 μm exhibited excellent tensile strength of ~49.1 MPa, a low percolation threshold of 1.4 vol% AgNWs, no significant changes in electrical conductivity after 2000 bending. The outstanding synergy between green CNFs and AgNWs endowed the paper with high EMI shielding effectiveness of up to 39.3 dB in X band and effective shielding effects on electromagnetic signals for realistic mobile phone communication. The special CNF/AgNW papers are expected to broaden new application fields as electronic devices e.g. flexible electronic components or effective ultra-thin EMI shielding materials for daily demands.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Scientific Reports · 2020 ·Vol. 10 ·期 1 ·1-9 · IF 3.998

Improving emulsion stability based on ovalbumin-carboxymethyl cellulose complexes with thermal treatment near ovalbumin isoelectric point

Li Zhenshun,Kuang Hairui,Yang Jinchu,Hu Jie,Ding Baomiao,Sun Weiqing,Luo Yangchao

Ovalbumin (OVA) is an important protein emulsifier. However, it is unstable near the isoelectric point pH, which limits its applications in the food industry. Polysaccharides may be explored to tackle this challenge by improving its pH-dependent instability. In this work, carboxymethyl cellulose (CMC) was used as a model polysaccharide to mix with OVA near its isoelectric point (pH 4.7) with subsequent mild heating at 60 °C for 30 min. The molecular interactions between OVA and CMC were comprehensively studied via a series of characterizations, including turbidity, zeta potential, intrinsic fluorescence, surface hydrophobicity, circular dichroism (CD) spectra and Fourier transform infrared spectroscopy (FTIR). The droplet sizes of the emulsions prepared by OVA-CMC were measured to analyze emulsifying property and stability. The results indicated that free OVA was easily aggregated due to loss of surface charges, while complexing with CMC significantly inhibited OVA aggregation before and after heating owing to the strong electrostatic repulsion. In addition, OVA exposed more hydrophobic clusters after heating, which resulted in the growth of surface hydrophobicity. Altogether, the heated OVA-CMC complexes presented the best emulsifying property and stability. Our study demonstrated that complexing OVA with CMC not only greatly improved its physicochemical properties but also significantly enhanced its functionality as a food-grade emulsifying agent, expanding its applications in the food industry, as development of emulsion-based acidic food products.

CAS / MDL: 9004-32-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
POLYMER SCIENCE SERIES A · 2020 ·Vol. 61 ·期 6 ·832-846 · IF 0.968

The Consequence of Epoxidized Soybean Oil in the Toughening of Polylactide and Micro-Fibrillated Cellulose Blend

Sakil Mahmud,Long Yu,Yang Yong,Huang Juncheng,Zhang Ruoyu,Zhu Jin

Abstract Utilization of modest to good strength and stiffness of polylactide (PLA) as well as overcoming its brittle phenomenon is the primary concern of this study. Therefore, melt-blending with a lab-scale two-screw extruder was conducted on PLA and micro-fibrillated cellulose (MFC) with and without epoxidized soybean oil (ESO) as a reactive plasticiser. Introducing ESO has a major effect on the blends’ toughness. A low span scanning electron microscope (SEM) was used to observe PLAs transition from brittle to ductile behavior. PLA/MFC/ESO ternary blends’ elongation-at-break, bending strain and notch impact strength were improved to 105, 9.7% and 7.20 kJ/m 2 respectively. This assembly also helps in the increase of the plasticisation effect which leads to reduced glass transition T g and crystallization T c temperatures, observable using differential scanning calorimetry (DSC). Thermogravimetric analysis (TGA) shows an increase in ternary blends’ decomposition temperature compared with neat PLA which suggests the blends are thermally stable. Fourier transform infrared (FTIR) spectroscopy allowed significant changes in peak positions to explain the interactions among blended components. The entire process rests on a simple, effective methodology whereby improved PLA/MFC blend toughness by ESO is achieved.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES SCIENCE AND TECHNOLOGY · 2020 · IF 7.094

Fabricating robust soft-hard network of self-healable polyvinyl alcohol composite films with functionalized cellulose nanocrystals

Yuxiang Chen,Jiaying Zhu,Hou-Yong Yu,Yingzhan Li

In this study, conductive cellulose nanocrystals (CNCs) were coated with polypyrrole (PPy) using in situ chemical polymerization to form CNC-PPy conductive nano-network. The one-pot polymerization of “hard” segment methyl methacrylate (MMA) was continued onto above functionalized CNCs, then blended with “soft” molecular segment polyvinyl alcohol (PVA) to contain self-healing and conductive composite film (CPMV) fabricated by soft-hard network. In addition, the tensile strength of CPMV films with 2 wt% CNC-PPy was enhanced by 47.1%. Also, CPMV films exhibited self-healing properties due to the presence of hydrogen bonding dynamic network and showed sensitive resistance changes under external stimuli, which could be used to monitor various actions of the human body. Thus, the CPMV films present potential applications in electronic devices such as flexible electrodes , biosensors, and implantable devices .

CAS / MDL: 80-62-6 109-97-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CATALYSIS LETTERS · 2020 ·Vol. 150 ·期 8 ·2294-2303 · IF 2.482

Effective Conversion of Cellulose to Sorbitol Catalyzed by Mesoporous Carbon Supported Ruthenium Combined with Zirconium Phosphate

Zhang Gang,Chen Tong,Zhang Yi,Liu Tao,Wang Gongying

Abstract The selective conversion of cellulose to sorbitol is a promising route to valorize biomass. A binary catalyst ZrP-Ru/MC was constructed by mesoporous carbon supported ruthenium (Ru/MC) combined with zirconium phosphate (ZrP). It was found that ZrP-Ru/MC was an excellent catalyst for the conversion of cellulose with high sorbitol yield. Under the optimal reaction condition, a high sorbitol yield of 66.4% was obtained in just 1.5 h if cellulose was mix-milled together with ZrP. The characterizations results indicated that the high dispersion of Ru and macroporous–mesoporous structure were the key factor to determine the excellent catalytic activity of Ru/MC. In addition, the Ru TOF of 220 h −1 in the Ru/MC was much higher than that of commercial ruthenium carbon, indicating the high Ru utilization in Ru/MC. Graphic Abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CARBOHYDRATE POLYMERS · 2020 · IF 7.182

Characterization of bacterial cellulose composite films incorporated with bulk chitosan and chitosan nanoparticles: A comparative study

Siyi Ju,Fenglun Zhang,Jiufang Duan,Jianxin Jiang

Ternary composite films containing bulk chitosan (CS) and chitosan nanoparticles (CSNPs) with different concentrations were prepared using bacterial cellulose/poly(vinyl alcohol) as the base film and the composites films were compared. The micromorphology and mechanical, physical, chemical, antibacterial, and optical barrier properties of the composite films were compared. CS incorporation improved the mechanical properties, as the maximum tensile strength was increased to 130.55 ± 9.42 MPa. The dense structure of CSNPs prevented water diffusion and lessened the water content of the composite membranes. The inclusion of CS and CSNPs both reduced the water solubility and water vapor permeability. CS-doped films possessed good transparency, while CSNPs had better ultraviolet-barrier properties (3.84 % of transmittance at 200–280 nm). In addition, CSNPs-embedded membranes exhibited prominent antibacterial properties against Escherichia coli and Staphylococcus aureus , which were much greater than those of CS composite membranes with a maximum bacteriostatic diameter of 10.33 ± 1.55 mm.

CAS / MDL: 9002-89-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Materials · 2020 ·Vol. 13 ·期 2 ·437 · IF 3.057

A New Environmentally-Friendly System for Extracting Cellulose from Corn Straw: The Low Temperature Laccase System

Heming Song,Hongge Jia,Qingji Wang,Xinyi Zhao,Guoxing Yang,Mingyu Zhang,Hailiang Zhou,Shuangping Xu,Yu Zang,Yazhen Wang,Liqun Ma

Corn straw is an agricultural waste. The system for extracting cellulose from corn straw at a high temperature has been widely reported by researchers. However, the system for extracting cellulose from corn straw at a low temperature has been rarely reported. In this paper, a new system for extracting cellulose from corn straw at a low temperature was reported for the first time. This new system is designated as the low temperature laccase system (LTLS). Cellulose was successfully extracted from corn straw by the LTLS, and the used solution could be recycled. Therefore, the low temperature laccase system is an environmentally-friendly system. The cellulose content in corn straw is 30–40%. The yield of cellulose extracted by LTLS was 33%. The obtained cellulose product was creamy white. The extracted cellulose samples were characterized by using infrared spectroscopy (IR), thermogravimetry (TG), and X-ray diffraction (XRD). The results were consistent with that of standard cellulose. We confirmed that the LTLS extracted cellulose from corn straw with high purity.Keywords:cellulose;corn straw;low temperature;laccase

CAS / MDL: 9004-34-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。