Drug Delivery and Translational Research
·
2023
·
IF 5.4
Fang Ruiyue,Zhao Ying,Lin Shiyuan,Wei Yue,Chen Hui
This study aimed to enhance the oral absorption of Panax notoginseng saponins (PNS) via nanoparticles modified with thiolated trimethyl chitosan (TMC-Cys) and wheat germ agglutinin (WGA), termed PP-WT NPs. In vitro investigations revealed that PP-WT NPs exhibited delayed release of PNS and a strong tolerance to the gastric acids and digestive enzymes. Moreover, PP-WT NPs exhibited efficient cellular uptake and transport capabilities in the Caco-2/HT29-co-cultured cell model. In vivo animal experiments demonstrated that PP-WT NPs effectively overcame the mucus layer barrier, with the effective permeability coefficients of R1, Rg1, and Rb1 in the small intestine being 1.68, 1.64, and 1.63 times higher than those of free PNS, respectively. Taken together, thiolated trimethyl chitosan and wheat germ agglutinin–modified nanoparticles hold significant potential for improving the oral absorption of PNS, representing an attractive strategy for enhanced therapeutic efficacy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD HYDROCOLLOIDS
·
2023
·
IF 10.7
Yajuan Sun,Chenglei Wang,Hang Jiang,Bingtian Zhao,Cheng Yang,Yunxing Li
Herein we reported highly biocompatible and stable oil-in-water-in-oil (o/w/o) Pickering double emulsions (PDEs) using a one-step emulsification procedure. Natural phytosterol (PS) particles and chitosan (CS) self-assembled into PS/CS complex paritlces to serve as particulate stabilizers while gelatin was used as viscosity modifier for aqueous phase. By varying the viscosity of aqueous phase, water/oil volume ratio, and homogenization time, the formation and stabilization mechanism of o/w/o PDEs were explored. The viscosity of aqueous phase and occurrence of phase inversion are essential for the formation of PDEs. Additionally, the adsoprtion of PS/CS complex particles on the oil/water interface and high viscosity of aqueous phase both aid in the stabilization of PDEs. Furthermore, the o/w/o PDEs showed good storage stability at 4 °C and 25 °C (at least 2 months), with essentially little change in emulsion structure . And a variety of oils can be used to prepare the PDEs. What's more, the o/w/o PDEs can co-encapsulate hydrophilic and hydrophobic bioactive compounds , shielding them against UV exposure and long-term storage. In summary, these findings will not only aid in the development of biocompatible o/w/o PDEs, but also provide a guidance for co-encapsulating and protecting bioactive compounds that are both hydrophilic and hydrophobic.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2023
·Vol. 28
·期 20
·7034
·
IF 4.6
Ali M. Ali,Abdelrahman M. Hamed,Mahmoud A. Taher,Mohamed H. Abdallah,Mohamed Abdel-Motaleb,Zyta M. Ziora,Ahmed M. Omer
Developing a variety of safe and effective functioning wound dressings is a never-ending objective. Due to their exceptional antibacterial activity, biocompatibility, biodegradability, and healing-promoting properties, functionalized chitosan nanocomposites have attracted considerable attention in wound dressing applications. Herein, a novel bio-nanocomposite membrane with a variety of bio-characteristics was created through the incorporation of zinc oxide nanoparticles (ZnONPs) into amine-functionalized chitosan membrane (Am-CS). The developed ZnO@Am-CS bio-nanocomposite membrane was characterized by various analysis tools. Compared to pristine Am-CS, the developed ZnO@Am-CS membrane revealed higher water uptake and adequate mechanical properties. Moreover, increasing the ZnONP content from 0.025 to 0.1% had a positive impact on antibacterial activity against Gram-positive and Gram-negative bacteria. A maximum inhibition of 89.4% was recorded againstEscherichia coli, with a maximum inhibition zone of 38 ± 0.17 mm, and was achieved by the ZnO (0.1%)@Am-CS membrane compared to 72.5% and 28 ± 0.23 mm achieved by the native Am-CS membrane. Furthermore, the bio-nanocomposite membrane demonstrated acceptable antioxidant activity, with a maximum radical scavenging value of 46%. In addition, the bio-nanocomposite membrane showed better biocompatibility and reliable biodegradability, while the cytotoxicity assessment emphasized its safety towards normal cells, with the cell viability reaching 95.7%, suggesting its potential use for advanced wound dressing applications.Keywords:aminated chitosan;ZnO nanoparticles;antibacterial activity;antioxidant activity;biodegradable membrane
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2023
·
IF 5
Jingchen Gao,Xiyuran Wang,Xiangyi Kong,Xujin Yao,Jinyang Ren,Shujun Chen,Na Shen,Zhuo Li,Yitian Wang,Ye Wei,Oleg Glebov,Fengyuan Che,Qi Wan
Proline, a nonessential amino acid, has been demonstrated to possess neuroprotective capabilities in the central nervous system (CNS). However, the mechanisms through which it impacts cerebral ischemia–reperfusion (I/R) injuries remain unclear. Our study observed a decrease in proline concentrations within the ischemic brain tissues of I/R mice. Supplementing proline protected against ischemic neuronal death, both in vivo and in vitro, suggesting its potential as a neuroprotectant. However, our data indicated that proline has a low permeability to the blood–brain barrier (BBB) in mice. Therefore, it is clinically infeasible to develop proline as a stroke therapy. To develop an approach to deliver proline into the injured brain, we engineered a method to transport proline to the injured brain. We prepared chitosan nanoparticles (NPs) loaded with proline utilizing the ion cross-linking method. Our findings demonstrated that the proline-loaded chitosan NPs efficiently passed through the BBB and delivered proline into the injured brain, thereby conferring neuroprotection. Further exploration revealed that proline upregulated the level of annexin A6 (ANX6)/β1 integrin, which, in turn, increased the phosphorylation of cell-survival-promoting kinase Akt. This sequence of events consequently promotes neuronal survival following I/R. In conclusion, our study has developed a neuroprotection approach by which low-BBB-permeable proline is delivered by chitosan NPs into the brain. Furthermore, this study suggests that the neuroprotective role of proline in I/R is mediated by the ANX6/β1 integrin/Akt signaling pathway.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2023
·
IF 4.1
Kaixing Luo,Yaya Gao,Yuefei Zhang,Wei Chen,Sheng Tang
In this study, chitosan (CS) and polyacrylic acid (PAA) were used to construct a double-crosslinked network hydrogel, which was employed as the functional material for silica microspheres to prepare a CS/PAA hydrogel modified liquid chromatographic stationary phase. During preparation, octadecene (ODE) was introduced into the CS/PAA hydrogel to improve its hydrophobicity and separation ability. The electrostatic interaction between the amino group of CS and the carboxyl group of PAA effectively prevented the swelling of the CS/PAA hydrogel, which ensured the successful application of the obtained CS/PAA hydrogel@SiO 2 in chromatographic analysis. Polar nucleosides/bases and B-vitamins were selectively separated using hydrophilic interaction liquid chromatography. Hydrophobic polycyclic aromatic hydrocarbons and alkylphenols were effectively separated through reversed-phase liquid chromatography. Moreover, the effective separation of aromatic positional isomers and chiral enantiomers was achieved. This study confirms the potential application of the CS/PAA hydrogel in chromatographic separation. What is noteworthy is that the method developed in this study also provides a feasible strategy to solve the swelling issue associated with the hydrogel-based liquid chromatographic stationary phase.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2023
·
IF 6
Chaoyi Shen,Jiahao Zhong,Fengjun Guo,Changfeng Zhang,Changqing Zhu,Di Wu,Kunsong Chen
The purpose of the present study was to utilize solution blow spinning to fabricate curcumin (CUR)-loaded polycaprolactone (PCL)/carboxymethyl chitosan (CMCH) nanofibers with photodynamic inactivation activity for inactivation of S. aureus . The results of ATR-FTIR and XRD spectra demonstrated the successful encapsulation of CUR without disrupting the structure of the nanofibers and increasing the crystallinity of the nanofibers. After the encapsulation of CUR, the thermal stability, tensile strength, and hydrophobicity of the PCL/CMCH nanofibers were improved. Besides, the CUR-loaded PCL/CMCH nanofibers possessed good biocompatibility and low toxicity, and could release CUR sustainably over 120 h. Moreover, the obtained nanofibers showed better inhibition of S. aureus under blue light irradiation at a wavelength of 450 nm compared to the no-light condition. The above results suggested that the developed nanofibers with photodynamic inactivation can be applied as food packaging materials to reduce the impact of S. aureus on human wellness.
✓ 已验证
产品关联
DOI
高影响因子
Scientific Reports
·
2023
·Vol. 13
·期 1
·1-14
·
IF 4.6
Alishiri Mahsa,Gonbadi Maryam,Narimani Mehdi,Abdollahi Seyyed Amirreza,Shahsavaripour Negin
The contamination of the aquatic environment with antibiotics is among the major and developing problems worldwide. The present study investigates the potential of adsorbent magnetite-chitosan nanoparticles (Fe 3 O 4 /CS NPs) for removing trimethoprim (TMP) and sulfamethoxazole (SMX). For this purpose, Fe 3 O 4 /CS NPs were synthesized by the co-precipitation method, and the adsorbent characteristics were investigated using XRD, SEM, TEM, pH zpc , FTIR, and VSM. The effect of independent variables (pH, sonication time, adsorbent amount, and analyte concentration) on removal performance was modeled and evaluated by Box–Behnken design (BBD). The SEM image of the Fe 3 O 4 /CS adsorbent showed that the adsorbent had a rough and irregular surface. The size of Fe 3 O 4 /CS crystals was about 70 nm. XRD analysis confirmed the purity and absence of impurities in the adsorbent. TEM image analysis showed that the adsorbent had a porous structure, and the particle size was in the range of nanometers. In VSM, the saturation magnetization of Fe 3 O 4 /CS adsorbent was 25 emu g −1 and the magnet could easily separate the adsorbent from the solution. The results revealed that the optimum condition was achieved at a concentration of 22 mg L −1 , a sonication time of 15 min, an adsorbent amount of 0.13 g/100 mL, and a pH of 6. Among different solvents (i.e., ethanol, acetone, nitric acid, and acetonitrile), significant desorption of TMP and SMX was achieved using ethanol. Also, results confirmed that Fe 3 O 4 /CS NPs can be used for up to six adsorption/desorption cycles. In addition, applying the Fe 3 O 4 /CS NPs on real water samples revealed that Fe 3 O 4 /CS NPs could remove TMP and SMX in the 91.23–95.95% range with RSD (n = 3) < 4. Overall, the Fe 3 O 4 /CS NPs exhibit great potential for removing TMP and SMX antibiotics from real water samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Ling Ding,Chaoyou Tao,Shuai Zhang,Bowen Zheng,Zhenhua Dang,Lin Zhang
In this study, an amorphous silica reinforced, phosphoric-crosslinked chitosan foam (P-CTS@Si x O y ) was prepared. The introduction of amorphous silica not only increased the affinity of the adsorbent for uranium, but also improved the stability of the material. The number of active sites of P-CTS@Si x O y was increased by the introduction of phosphate groups. The material exhibited excellent uranium adsorption performance with the removal capacity and efficiency of 850.5 mg g −1 and 98.1 %, respectively. After regenerations, the morphology of P-CTS@Si x O y still maintained, and the uranium adsorption efficiency remained above 90 %, manifesting the excellent cycle performance of P-CTS@Si x O y . In the dynamic adsorption experiment, P-CTS@Si x O y successfully concentrated the volume of uranium-containing solution, and exhibited excellent uranium adsorption performance. The analysis of kinetics, isotherms, and thermodynamics manifested that the uranium adsorption behavior of P-CTS@Si x O y was a spontaneous, endothermic, monolayer chemical adsorption process. X-ray photoelectron spectroscopy, Scanning Electron Microscope, and Fourier Transform Infrared Spectrometer were used to characterized the P-CTS@Si x O y before and after adsorption, which demonstrated that the main interaction mechanism between uranium and P-CTS@Si x O y was the complexation. These studies indicated the huge application prospect of P-CTS@Si x O y in the treatment of large-scale uranium-containing wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanoscale
·
2021
·Vol. 13
·期 10
·5333-5343
·
IF 7.79
Xuemei Gao,Dajing Guo,Xiang Mao,Xuefeng Shan,Xuemei He,Chaoqun Yu
Reducing the size of ultrasound contrast agents (UCAs) will decrease the intensity of the ultrasound echogenic signals and reduce the stability of the bubbles. Therefore, it is a challenge to design nanobubbles that are less than 200 nm in size and that have both good imaging abilities and high stability for long-term imaging in vivo. In this work, we successfully prepared perfluoropentane-filled chitosan poly-acrylic acid (PFP-CS-PAA) nanobubbles with a size of about 100 nm via a direct simple core-template-free strategy. In vitro tests demonstrated that the nanobubbles showed satisfactory imaging capabilities in non-linear harmonic imaging mode and had significantly better stability than commercial Sonovue® lipid microbubbles. It was valuable to discover that the prepared PFP-CS-PAA nanobubbles could exhibit good imaging quality in rat livers for 10 min after intravenous injection. Also, the PFP-CS-PAA nanobubbles could maintain imaging capabilities in nude mouse tumors for 7 days after intratumoral injection, which indicated that these nanobubbles could keep their stability for a long time in vivo. To the best of our knowledge, the ultrasound imaging persistence time in vivo was the longest of currently reported polymer nanobubbles that are smaller than 200 nm. This new nanosized UCA with high stability has great potential for long-term ultrasound imaging in vivo. Tumor cellular uptake and histological analysis revealed that PFP-CS-PAA nanobubbles could be taken up into tumor cells, but no intracellular uptake was observed in the case of Sonovue®. Animal fluorescence imaging in vivo demonstrated that PFP-CS-PAA nanobubbles could be effectively cleared after intravenous injection within 168 h. MTT assays indicated that PFP-CS-PAA nanobubbles had appropriate biocompatibility. Abnormal levels of blood urea nitrogen were detected after the intravenous administration of PFP-CS-PAA nanobubbles to rats, and body-weight gain was inhibited for up to 6 d, but, after that, body weights recovered their tendency to increase.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Today Communications
·
2021
·
IF 3.383
Xuping Wang,Pengfei Zhou,Xiaojing Lv,Yongjia Liang
Recently, the development of solution processing of chitin/chitosan in natural deep eutectic solvents (NADESs) is one of the most promising strategies for handling insoluble biopolymers. A facile and efficient approach including choline chloride-based and betaine-based NADESs, were designed as solvents for chitin/chitosan with various degree of deacetylation (DD). The maximum solubility of chitin/chitosan (10.2 g/100 g) was obtained in NADESs composed of choline chloride-lactic acid (ChLa). The relationships between the solubility, crystallinity index (CrI), and DD of the dissolved chitin/chitosan with different pH values of NADESs were discussed, and the results indicated that DD of chitin/chitosan dominated its solubility. Furthermore, mechanistic analysis showed that the hydrogen-bonding interactions contained NH⋯OH or OH⋯OH between chitin and NADESs was the possible reason for better solubility of chitin in ChLa. The NADESs-chitin processing platform in this text reveals the potential of NADESs for the environmentally-aware research and developing chitin-based industrial processes and products.
✓ 已验证
产品关联
DOI
高影响因子
Microfluidics and Nanofluidics
·
2021
·Vol. 25
·期 2
·1-13
·
IF 2.529
Ge Xue-hui,Du Yu-han,Huang Xiaolian,Mo Liangji,Wang Hongxing,Qiu Ting
In this paper, the peppermint oil/HP-β-CD (2-hydroxypropyl-β-cyclodextrin)/chitosan composite microcapsules were prepared. The release ability of these microcapsules was improved for peppermint oil through the combination of molecular encapsulation by HP-β-CD and physical encapsulation by chitosan shell. First, stable peppermint oil/HP-β-CD pre-emulsion was prepared by stirring, based on which the optimal conditions were determined for producing the pre-emulsions with the highest encapsulation efficiency. Then, the pre-emulsion was moved into the flow-focusing microfluidic device as the inner phase and was cut into droplets by chitosan aqueous solution as the middle phase and the octanol as the outer phase to obtain templated emulsions. They were collected using a Petri dish with n-octane coagulation bath containing glutaraldehyde and 2 wt% span80 to be cured into microcapsules. The crosslinking time and the ratio of HP-β-CD in the templated emulsions were adjusted to investigate their impact on the microcapsule structures and correspondingly the capability of the microcapsules to retain peppermint. It was found out that the extended crosslinking time and the addition of HP-β-CD can improve the capability of the composite microcapsules to retain peppermint oil. It provides a straightforward method to produce composite microcapsules. Besides, the microcapsules with improved retaining ability were obtained by combing molecular and physical encapsulation, thus laying a foundation for the exquisite, efficient and polylaminate protection of the volatile perfume or other physically or chemically active components.
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2021
·
IF 9.381
Xin Li,Danlin Zeng,Zhiyong He,Ping Ke,Yongsheng Tian,Guanghui Wang
The efficient and recyclable magnetic chitosan microspheres (MCMs) were successfully synthesized to remove iodide from nuclear wastewater and characterized through XRD, FTIR , SEM, EDS , VSM, TGA and XPS . The characterization results indicated that the MCMs exhibited smooth spherical morphology and good magnetic properties. The removal potential of MCMs was investigated for iodide (I − ) anions at different conditions. From pH 3 to pH 9, MCMs performed the high I − removal efficiency (>90%). The maximum I − removal capacity of MCMs was up to 0.8087 mmol g −1 at 298 K, well-fitting with the pseudo-second-order and Sips models. Furthermore, the I − removal efficiency of MCMs still maintained more than 91% after five adsorption-desorption cycles, performing good regeneration and reusability. This study is expected to prompt the MCMs to become an efficient and recyclable biosorbent for iodide removal from nuclear wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子