IONICS
·
2022
·Vol. 29
·期 2
·505-518
·
IF 2.961
Yang Dongping,Xiong Deping,Feng Zuyong,Wen Kunhua,Wu Kaidan,He Miao,Feng Yefeng
Sn-based materials receive a lot of attention because of their high theoretical specific capacity, acceptable price, and good electrical conductivity. However, Sn-based materials have a large volume expansion in the circulation process, leading to the rapid decay of capacity. According to the ion diffusion time formula: t = L2/2D, where L is the diffusion length or the particle size, and D is the diffusion constant of the ions and the electrons. It can be seen that reducing the particle size can significantly improve the multiplier performance of the material. At present, the main methods for preparing nano-sized metal/carbon composites are the high-energy ball grinding method, hydrothermal method, calcined metal, and organic matter precursor. In this paper, sodium alginate was used as a precursor system for the Fe-doped Sn @3D carbon composite material, which was applied to the lithium-ion battery anode to obtain excellent electrochemical performance (1133.5 mAhg −1 after 200 cycles at 0.2 Ag −1 ). The increase in the specific surface area of Fe-doped Sn @3D carbon also increases the charge transfer efficiency and further improves the multiplier performance of the electrode. Meanwhile, the nano-size and structure can better buffer the volume expansion and protect the structure of the electrode.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
复合材料
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2021
·Vol. 64
·期 8
·2008-2016
·
IF 8.273
Wen Xin,Lin Chensheng,Luo Min,Fan Huixin,Chen Kaichuang,Ye Ning
[PO 4 ] 3− possesses small microscopic second-order susceptibility and polarizability anisotropy, which inherently result in weak second-harmonic generation (SHG) and small birefringence. Herein, a new noncentrosymmetric phosphate, [C(NH 2 ) 3 ] 3 PO 4 ·2H 2 O, was successfully designed and synthesized by a solution evaporation method. [C(NH 2 ) 3 ] 3 PO 4 ·2H 2 O without metal ions is composed of planar conjugated guanidine cations and PO 4 tetrahedrons, which are connected by hydrogen bonds, forming a three-dimensional network. Physical property measurements indicate that the title compound displays an SHG response of 1.5 × KH 2 PO 4 (KDP) and a larger birefringence (0.055@546.1 nm) compared with most reported ultraviolet nonlinear optical phosphates. Furthermore, first-principles calculations reveal that the π-conjugated planar [C(NH 2 ) 3 ] + cations and [PO 4 ] 3− groups are responsible for its excellent linear and NLO properties.
研究领域:
材料科学
·
光学工程
·
无机化学
·
晶体工程
·
非线性光学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2018
·
IF 4.439
Deshan Cheng,Mantang He,Wenbin Li,Jihong Wu,Jianhua Ran,Guangming Cai,Xin Wang
Growing of ZnO nanoparticles on PET films without crystal seeding has been achieved by employing polydopamine as the anchor. The PDA layer was formed on the surface of PET film by the polymerization of dopamine. The PDA-PET was dipped into zinc precursors for hydrothermal growth of ZnO nanoparticles. Cluster-like ZnO nanoparticles were obtained and the special structure was affected by the growing time and zinc ion concentration. The surface morphology, structure and properties were characterized, and the functions including antimicrobial activity and UV protection of the ZnO-coated PET film were investigated. The developed facile hydrothermal approach without seeding will benefit the development of UV resistant and antimicrobial PET films.
研究领域:
材料科学
·
纳米技术
·
表面功能化
·
生物医用材料
·
高分子材料
✓ 已验证
DOI
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2011
·Vol. 22
·期 12
·2237-2243
·
IF 1.776
Chenhao Ke,Juan Li,Keyi Fang,Qiliang Zhu,Jin Zhu,Qing Yan
A hyperbranched polyamine was prepared using an A 2 + B 3 approach. It acted as a hyperbranched charring and foaming agent (HCFA) in combination with ammonium polyphosphate (APP) to form a new intumescent flame retardant (IFR) system for polyamide 6 (PA6). Effect of HCFA on flame retardant and thermal degradation properties of IFR-PA6 was investigated by limiting oxygen index (LOI), UL-94 vertical burning, cone calorimeter, and thermogravimetric analysis (TGA) tests. The IFR system presented the most effective flame retardancy in PA6 when the weight ratio of APP to HCFA was 2:1. The LOI value of IFR-PA6 could reach 36.5 with V-0 rating when the IFR loading was 30 wt%. Even if the loading decreased to 25 wt%, IFR-PA6 could still maintain V-0 rating with an LOI value of 31. TGA curves indicated that APP would interact with both PA6 and HCFA in PA6/APP/HCFA composite under heating. The interaction between APP and HCFA improved the char formation ability of IFR system and then much more char was formed for PA6/APP/HCFA composite than for PA6/APP. Therefore, better flame retardancy was achieved. Moreover, the structure and morphology of char residue were studied by Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The results indicated that compact and foaming char layer containing P-O-C structure was formed for PA6/APP/HCFA system during combustion. Copyright © 2010 John Wiley & Sons, Ltd.
研究领域:
高分子化学
·
材料科学
·
阻燃材料
·
热稳定性
·
聚合物复合材料
✓ 已验证
DOI
高影响因子
POLYMER
·
2019
·
IF 3.771
Feng Chen,Ziqing Tang,Shaoping Lu,Lin Zhu,Qilin Wang,Qin Gang,Jia Yang,Qiang Chen
Double network hydrogels (DN gels) are one of most extensively investigated high strength hydrogels. However, most of DN gels are concern to macromolecules , low-molecular-weight gelators (LMWG)-based supramolecular hydrogels are rarely reported to fabricate recoverable DN gels. Owing to the low mechanical properties, LMWG-based supramolecular hydrogels are hardly fabricated as conductive materials for human motion monitoring. Herein, we report a general strategy to fabricate strong, tough and conductive cholate-based supramolecular gels with double network (DN) structure (i.e. La-cholate/PAAm DN gels), consisting of La-cholate supramolecular gel as first network and covalent polyacrylamide gel (PAAm gel) as second network, in which La-cholate supramolecular gel was self-assembled by La 3+ ions and sodium cholate under sonication via the synergistic effect of hydrogen bonds , hydrophobic interactions and metal-coordination. At optimal condition, La-cholate/PAAm DN gel exhibited high tensile properties (fracture stress of 0.314 MPa, fracture strain of 29.85 mm/mm, elastic modulus of 90 kPa, and work of extension of 5.678 MJ/m 3 ) and high toughness (tearing energy of 1098 J/m 2 ), which are comparable to conventional chemical or hybrid DN gels. Meanwhile, La-cholate/PAAm DN gel also showed rapid self-recovery property (stiffness recovery of 84% and toughness recovery of 46% after resting for 3 min) at room temperature and λ-dependent luminescent property under UV-light. More importantly, cholate-based supramolecular gels with DN structure could be prepared with various metal ions and monomers . Interestingly, our cholate-based DN gels were ionically conductive, which could be used as strain sensor to finely detect the human motions. We hope our design principles, along with the simple method and cholate-based DN gels, can be generally applied to develop a new generation of strong and tough LMWG-based supramolecular hydrogels with various functionalities.
研究领域:
高分子科学
·
生物材料
·
软物质物理
·
纳米医学
·
组织工程
·
智能响应材料
·
生物传感
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Chao Yang,Jun Yang,Ge Song,Limin Zang,Qifan Liu,Jianhui Qiu,Xue Yang,Chun Wang
Oil/water separation has recently attracted a great deal of attention for research due to the frequent occurrence of an oil spill as well as the increase of industrial and household oily wastewater. Therefore, the purpose of this study is to demonstrate underwater superoleophobic crosslinked phosphorylated poly(vinyl alcohol) hydrogel coated stainless steel mesh (CL-PPVA@SSM), which was fabricated using a simple dip-coating method and aldol reaction on the mesh substrate. The as-prepared CL-PPVA@SSM is capable of separating oil from a variety of different oil/water mixtures with high separation efficiency up to 99.2%, excellent recyclability and fast water permeate flux of 467.7 L m –2 h –1 , which makes it suitable for the separation of oil-water mixtures from oil-water emulsions. Also, in the oil-water separation process, the CL-PPVA@SSM is capable to remove organic dye from the water. The CL-PPVA@SSM exhibits stability under various harsh conditions such as mechanical abrasion. Importantly, the CL-PPVA@SSM shows a massive potential to separate kitchen waste oil/water mixtures due to the underwater superoleophobic property as required for the recycling of kitchen waste oil. Therefore, this method has been met with a promising application prospect of practical application.
研究领域:
材料科学
·
环境工程
·
高分子化学
·
表面工程
·
化学工程
·
纳米技术
·
水处理技术
✓ 已验证
DOI
高影响因子
Nano Energy
·
2020
·
IF 16.602
Jingyi Wu,Xiongwei Li,Zhixiang Rao,Xiaoning Xu,Zexiao Cheng,Yaqi Liao,Lixia Yuan,Xiaolin Xie,Zhen Li,Yunhui Huang
Lithium metal is a promising anode material for rechargeable batteries with high energy density . However, the uncontrollable dendrite growth severely hinders the commercialization of Li metal anode . Inspired by the “leveling” mechanism in traditional electroplating, we demonstrate that boron nitride nanosheets (BNNSs) as a liquid electrolyte additive can level out Li protrusions and enable dendrite-free Li metal anodes. 2D BNNSs can automatically and continuously flatten Li deposits and accommodate volume changes during Li plating/stripping. B atoms in BNNS as Lewis acid sites interact with Lewis basic anions in electrolyte, reducing Li + concentration gradient and unifying Li deposition. The collect effects of BNNS additive give rise to dendrite-free Li anodes over 400 h and deep plating/stripping up to 35 mAh cm −2 , as well as potential application in sub-zero temperature batteries (−20 °C). Li–S full cells using BNNS electrolyte also exhibit improved performance. This simple and effective strategy is applicable to develop dendrite-free Li or other metal anodes in high-performance energy storage devices.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
电池技术
✓ 已验证
DOI
高影响因子
Advanced Optical Materials
·
2022
·Vol. 11
·期 3
·2202195
·
IF 10.05
Xiaojing Li,Zilong Chen,Fuming Li,Fangfang Zhang,Zhihua Yang,Shilie Pan
A long-lasting challenge in ultraviolet (UV) nonlinear optical (NLO) materials design is to combine conflicting and harsh properties into one structure, including wide UV transparency, strong NLO efficiency, and moderate birefringence to realize phase-matching at short wavelength. A fluorine-directed material design strategy is adopted to accelerate the process of finding NLO materials with optimal performances. In this work, taking LiB 3 O 5 (LBO) as a maternal structure, one O atom with two F atoms is substituted and LiNaB 6 O 9 F 2 which possesses novel double interpenetrating 3 [B 6 O 9 F 2 ] ∞ networks and fluorine-directed optimal performances including enhanced birefringence and phase-matching capacity is successfully obtained. The perfect balance among deep-UV cutoff edge, large second-harmonic generation (SHG) response (1.1 × KDP), and moderate birefringence (0.067 at 1064 nm) of LiNaB 6 O 9 F 2 makes it a promising UV NLO crystal.
研究领域:
材料科学
·
晶体化学
·
非线性光学
·
功能材料
·
固体化学
✓ 已验证
DOI
高影响因子
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
·
2016
·Vol. 105
·期 6
·1369-1378
·
IF 2.881
Bing Wang,Jun Dong,Lijing Niu,Wenyan Chen,Dongliang Chen,Chengyi Shen,Jiang Zhu,Xiaoming Zhang
Electrospun membranes of poly(p-dioxanone-co- l -phenylalanine) (PDPA) hold potential as an anti-adhesion material. Since adjustable degradation properties are important for anti-adhesion materials, in this study, the in vitro and in vivo degradation processes of PDPA electrospun membranes were investigated in detail. The morphological analysis of these membranes revealed the main degradation conditions of PDPA membranes. The weight remaining and molecular weight variation showed that the overall degradation rate of the membranes could be adjusted by modulating the molecular structure of the PDPAs. Especially, α-chymotrypsin could catalyze the degradation process of PDPAs. Based on these results, the in vitro degradation mechanism was demonstrated, and confirmed by 1 H NMR of the hydrolysis products. Finally, the in vivo degradation and biocompatibility of different PDPAs were investigated. The kinetic study showed that the in vitro and in vivo molecular weight loss of PDPAs have the first-order characteristics. The in vivo degradation rate of the most Phe-containing PDPA-3 is the slowest, and this result relates to the biocompatibilities of PDPAs. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 1369–1378, 2017.
研究领域:
生物材料学
·
组织工程
·
高分子科学
·
生物医学工程
·
药物递送
·
再生医学
·
生物降解
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2017
·
IF 3.012
Haojie Zhu,Ke Yang,Hua Lan,Shangshu Qian,Haoxiang Yu,Lei Yan,Nengbing Long,Miao Shui,Jie Shu
In this work, Na 2 Ti 3 O 7 is fabricated as lithium storage material via one-step solid state reaction. Worked as anode material , Na 2 Ti 3 O 7 delivers a stable electrochemical performance with good lithium storage capability. Structural analyses show that Na 2 Ti 3 O 7 anode experiences slight volume change during electrochemical lithiation/delithiation process. Moreover, the reversibility of structural evolution is further demonstrated by in-situ X-ray diffraction technique . All these evidences prove the cycling stability of Na 2 Ti 3 O 7 as lithium storage material. Besides, the kinetic properties of the Li + ion storage in Na 2 Ti 3 O 7 are systematically investigated. The observed results reveal that Na 2 Ti 3 O 7 delivers the lithium ions diffusion coefficient in the range of 10 − 14 –10 − 12 cm 2 s − 1 during the discharge process and 10 − 15 –10 − 12 cm 2 s − 1 during the recharge process. It suggests that Na 2 Ti 3 O 7 has good lithiation/delithiation kinetics in rechargeable batteries.
研究领域:
电化学
·
材料科学
·
能源存储
·
无机化学
·
固体化学
✓ 已验证
DOI
高影响因子
POLYMER
·
2023
·
IF 4.6
Peng Wei,Dong Huang,Chen Luo,Yang Sui,Xi Li,Qingkun Liu,Bensheng Zhu,Chuanbo Cong,Qiong Zhou,Xiaoyu Meng
Due to its uncomplicated manufacturing procedure for large-scale industrialization and adaptable conductivity, the competitive proton exchange membrane (PEM) matrix employed is sulfonated poly (ether ether ketone). However, the conflict between the strong proton conductivity and high stability of SPEEK-based PEM constantly upsets the equilibrium; the primary chain of SPEEK will conduct more protons if additional sulfonic acid is introduced, but it also causes a high swelling ratio and lowers stability. To tackle this challenging issue, we coupled the high intrinsic proton conductivity of phosphotungstic acid (HPW) and the excellent stability of polyimide (PI) nanofibers in a single PEM. In particular, sandwich-structure hybrid membranes (PI/SPEEK + HPW) were created to reduce HPW loss under operational conditions, further improving stability. Consequently, the swelling ratio and conductivity of the premium sandwich-structure PI/SPEEK + HPW-20 were 29% and 223.4 mS cm −1 under 60 °C and 100% RH, their respective values were 8% larger than those of SPEEK. Its proton conductivity reached 170.9 mS cm −1 during 13 days of exposure under 60 °C and 100% RH, which would be 30% better than that of SPEEK over the same treatment. Protons in these membranes were transported through Grotthus and vehicle mechanism, and the establishment of an acid-rich layer at the surface among PI nanofiber with HPW/SPEEK, which was confirmed by FTIR, XPS , and TEM , is responsible for these superior performances. From our point of view, our findings might encourage more studies into the creation of high-performance PEM.
研究领域:
材料科学
·
高分子化学
·
能源材料
·
电化学
·
膜科学与技术
✓ 已验证
DOI
高影响因子
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
·
2021
·
IF 3.927
Nengyuan Zeng,Chenwei Wang,Chong Luo,Hongdong Zhao,Yuling Liu,Wantang Wang,Tengda Ma
This article proposed an improvement plan for the slurry to reduce the dishing caused during copper chemical mechanical polishing (CMP) of the interconnect structure. According to the difference in the pressure between the concave and convex parts of the copper film in the high-hardness polishing pad, polishing slurries were designed with a distinct difference in the polishing removal rate under high and low platen pressures to improve their planarization efficiency. 2 wt% GLY (glycine) and 1 wt% H 2 O 2 can provide a chemical dissolution effect, adding 0.1% TAZ (1,2,4-triazole) to slow down the corrosion mainly for the recession, by adjusting the slurry pH to 7. The polishing results showed that the slurry had a high copper removal rate (6772 Å/min) at high pressure (3.0 psi) and a much lower removal rate (3273 Å/min) at low pressure (1.2 psi). The pattern wafer polished with this slurry obtained relatively low dishing. The other comparison groups showed slight differences in copper removal rate at high and low pressure and a deeper dishing of the polished pattern wafer. In this paper, based on the analysis of static dissolution experiments, electrochemical experiments, and XPS experiments of copper films in different slurries, the chemical reaction mechanism of copper films in the solution system of GLY and H 2 O 2 was studied at different pH values. In addition, the inhibition mechanism of TAZ on the copper surface at different slurry pH values was proposed, including the properties of the TAZ molecule adsorption film on the copper surface, the uniformity of the surface coverage, and the thickness of the passivation layer . The results can reflect the polishing results to a certain extent despite some deviations, but it can also be used as a more reasonable argument to explain the optimization scheme of the slurry proposed in this article.
研究领域:
材料科学
·
微电子制造
·
表面化学
·
半导体工艺
·
腐蚀与防护
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）