BIOMEDICAL MICRODEVICES
·
2026
·Vol. 28
·期 1
·18
·
IF 4.4
Pang Zhengtian,Song Wenqi,Cai Yuanyuan,Li Yahang
Wearable sensors represent a promising platform for the non-invasive and continuous monitoring of biomarkers in biological fluids, showing considerable potential for real-time health management. In this study, we designed a wearable device integrated with gold nanoparticles (AuNPs) for glucose detection. The system features in-situ synthesized AuNPs embedded in a polyacrylamide (PAM) hydrogel—denoted as AuNPs@PAM—enabling dual-mode readout through both visual observation and UV–visible spectrophotometry. By leveraging the dual peroxidase-like and glucose oxidase-like activities of AuNPs, a nanozyme-enzyme cascade catalytic system was constructed for colorimetric glucose sensing, which demonstrated high sensitivity and strong stability. The in-situ synthesis of AuNPs within the PAM matrix enhances nanoparticle stability and increases the reactive surface area, thereby improving catalytic efficiency. Owing to the high flexibility and optical transparency of the PAM hydrogel, the sensing patch enables rapid and reliable glucose detection by both instrumental and visual means. Consequently, a sensitive and visually responsive flexible sensor has been successfully fabricated, offering an effective tool for non-invasive biomarker monitoring in superficial biofluids.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yufeng Zhang,Huawei Cao,Xiangdong Liu,Yongping Chen
Marangoni-Rayleigh-Bénard (MRB) convection characteristics during mass transfer within compound droplets were studied by integrating digital particle image velocimetry for flow visualization and schlieren imaging for concentration field analysis. Through comparative analysis of MRB convections in single-phase droplets, the hydrodynamic mechanisms underlying interfacial evolutions and vortex-cellular convection patterns in compound droplets were elucidated. Furthermore, the influences of initial solute concentration ( c 0 ) and core-shell ratios ( r / R ) on MRB convection behaviors, mass transfer properties, and morphological evolution of compound droplets were revealed. Three MRB convection patterns were identified: the Marangoni effect-dominated pattern (MD-pattern) with multiple pairs of counter-rotating vortex cells, the transition pattern (T-pattern) distinguished by a couple of co-rotating vortex cells, and the Rayleigh-Bénard effect-dominated pattern (RBD-pattern) characterized by a set of counter-rotating large vortex cells. At the initial Marangoni number Ma 0 ≥ 0.669 × 10 7 ( c 0 ≥ 20 wt%), the convection transitioned from the MD-pattern to the T-pattern and finally to the RBD-pattern, whereas at Ma 0 ≤ 0.361 × 10 7 ( c 0 ≤ 10 wt%), only the RBD-pattern was observed. For Ma 0 = 0.530 × 10 7 (15 wt%), a limited Marangoni effect competes with the Rayleigh-Bénard effect, resulting in the T-pattern. The convection intensity in droplets was enhanced by increased interfacial tension gradients, thereby significantly promoting mass transfer and resulting in pronounced droplet contraction. Conversely, the core-shell structure mitigated droplet contraction by reducing solute content that shortens the mass transfer duration while imposing spatial confinement that inhibits internal convection development. Notably, the vertical contraction far exceeded horizontal contraction due to the combined effects of lateral fluid migration driven by interfacial tension gradients at the droplet bottom and gravity-induced downward flow of fluid at the upper region.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Yang Yang,Jiaxin Li,Xiaoyao Guo,Fangye Wu,Jiayu Zhang,Peng Lu
The reliance of conventional carbon dioxide (CO₂) sensors on external power limits their application scope. Self-powered triboelectric nanogenerators offer a promising alternative, yet the development of high-performance triboelectric sensing materials remains a key challenge. This study presents an ingenious design using microgels from polyethyleneimine (PEI)-crosslinked nanocellulose as dual-functional building blocks to fabricate a mechanically robust and CO 2 -sensitive triboelectric foam. The microgels (optimized with 25,000 Da PEI) formed an optimal pore-forming template, facilitating the efficient and uniform distribution of PEI. The resulting cellulose foam achieves an excellent combination of high porosity (85.6%), low density and compressive toughness (1.37 MJ m −3 ), while functioning dually as the triboelectric layer and the CO 2 sensing material. The optimized TENG-based sensor enables sensitive CO₂ responsiveness, exhibiting a good linear relationship (R 2 = 0.99) within 750–2500 ppm, and maintaining robust signal output. This study provides a novel strategy for developing CO 2 -sensitive materials and significantly advances the application of triboelectric CO₂ sensors in air quality monitoring.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MOLECULAR BREEDING
·
2026
·Vol. 46
·期 3
·20
·
IF 3.6
Lin Fan,Ma Hongping,Chen Jianhui,Liang Shuang,Wu Zhijun,Fan Haili,Chen Shenglong,Kong Xiangqi,Zhang Tong,Hu Hongyan,Wang Hong
Genetic transformation has been a crucial technology for plant molecular biology research and molecular design breeding, particularly in modern agriculture, and currently gene function validation is mostly conducted on model plants, which severely limits the development of non-model plants such as medicinal plants. Polygonum cuspidatum Sieb. et Zucc. plays a significant role in the treatment of diabetes, cancer, respiratory and cardiovascular diseases, however, its optimal regeneration and gene transformation system is still not available. Here, we at first establish an efficient regeneration system for P. cuspidatum as: stems are the most suitable explants for callus induction and regeneration of buds, and N1 medium (MS medium with 1.0 mg/L 1-naphthylacetic acid (NAA), 0.1 mg/L kinetin (KT)) is the most suitable regeneration medium. Then based on this regeneration system, an Agrobacterium tumefaciens -mediated genetic transformation system via callus regeneration (CR) and organ regeneration (OR) is established and optimized as: the stems are immersed in the A. tumefaciens resuspension medium (1/4 MS medium added with 0.02% Silwet L-77) and vacuum infiltrated for 10 min, the optimal co-culture time is 5 days, and the most suitable screening antibiotic is 100 mg/L hygromycin (Hyg). In addition, the practicality of our introduced transformation system is confirmed through the experimental verification of the reporter gene DsRED and two candidate genes: stilbene synthase ( PcSTS) and MYB transcription factor ( PcMYB62) . In summary, our established system can not only efficiently regenerate and genetically transform P. cuspidatum , a typical non-model but highly valuable plant, but it could also serve as a reference for the construction of other non-model plant transformation systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 18
·1382
·
IF 3.2
Tan Ye,Wu Xi,He Guoliang,Li Huilin,Zhou Jie,Tong Haixia,Yu Linping,Zeng Julan
With the advancement of the pharmaceutical industry and livestock farming, the increasing release of antibiotic-containing wastewater poses serious threats to both the natural environment and human health. Developing novel, efficient technologies to remove tetracycline from water is a critical priority. In this study, a ternary BiOBr/g-C 3 N 4 /EG composite was successfully synthesized via a one-step solvothermal method. Under optimal conditions, the composite achieved a tetracycline (TC) removal efficiency of 98.49% within 50 min of visible-light irradiation, with degradation rate constants 1.40 and 1.74 times higher than those of pristine BiOBr and g-C 3 N 4 , respectively. XPS analysis revealed that the introduction of EG effectively suppressed the photoreduction of Bi 3+ to metallic Bi 0 , confirming that EG acts as an electron trap and establishes strong interfacial electronic interactions. BET analysis showed that the ternary composite possesses a specific surface area of 60.0 m 2 /g, which is significantly larger than that of BiOBr (28.9 m 2 /g) and g-C 3 N 4 (37.1 m 2 /g), promoting active site exposure and pollutant adsorption. PL spectroscopy demonstrated a marked decrease in emission intensity for the ternary composite, indicating effective suppression of electron–hole recombination. Mechanistic studies, including radical trapping and EPR, identified ·O 2 − and h + as the primary reactive species governing TC degradation. The enhanced performance is attributed to the synergistic effects of EG: (i) its oxygen-containing functional groups anchor BiOBr and g-C 3 N 4 , preserving heterojunction integrity; (ii) it serves as an electron trap to accelerate charge separation; and (iii) it enlarges the specific surface area and provides a conductive network for rapid charge transfer. This work offers a feasible and innovative strategy for designing high-performance carbon-supported semiconductor heterojunctions for environmental remediation.
✓ 已验证
产品关联
DOI
高影响因子
Coatings
·
2026
·Vol. 16
·期 7
·767
·
IF 3.4
Dong Chen,Xiaoping Huo,Qitai Guo,Tao Liu,Shiqiang Luo,Yue Zhang,Sude Ma
Conventional epoxy adhesives used in motor insulation structures still suffer from insufficient thermal resistance and difficulty in balancing heat resistance with mechanical reliability. In this study, BMI-modified E-51/MeHHPA/EMI-24 epoxy composites were prepared and evaluated as heat-resistant interfacial adhesives for simulated F-class pole windings. BMI/EP composites with different BMI contents were fabricated by melt blending and characterized in terms of curing kinetics, FTIR, mechanical properties, and thermal performance. The optimized formulation was then applied to bond Nomex insulation paper to the upright plate in a simulated pole winding. The results showed that BMI did not alter the main epoxy/anhydride curing pathway, but restricted segmental motion and improved thermal resistance. The 10phr BMI/EP composite exhibited a favorable balance among thermal performance, mechanical properties, and fracture morphology. The simulated winding prepared with this formulation showed no breakdown or flashover under 6800 V/60 s, with an insulation resistance of 64.49 GΩ. A lower-bound apparent temperature index of approximately 157 °C was obtained using the TGA-derived thermal life equation. These results indicate that this system has preliminary application potential as a heat-resistant interfacial adhesive for F-class motor winding insulation, although a complete thermal life assessment is still required.
✓ 已验证
DOI
高影响因子
Biology Direct
·
2026
·
IF 5.5
Du Shengwei,Zheng Peisen,Li Wen,Chen Guorong,Chen Hanbin
Hepatocellular carcinoma (HCC) remains a highly aggressive malignancy with a dismal prognosis, largely due to the limited effectiveness of current therapeutic interventions. Although Motesanib (MOT) is a clinically studied VEGFR-centered inhibitor, VEGFR-targeted strategies remain limited by innate or acquired resistance. In this study, we explored a novel pharmacological strategy combining MOT with Auranofin (AF) to enhance therapeutic outcomes in HCC. Our data demonstrate that this dual-targeting approach yields robust synergistic anticancer activity across diverse experimental models. Mechanistically, we discovered that TrxR1 inhibition is critical for this sensitization, which is closely associated with autophagy-related reactive oxygen species (ROS) accumulation. Specifically, genetic depletion of Atg5 effectively suppressed ROS accumulation and attenuated cytotoxicity, suggesting that autophagy contributes to the synergistic oxidative damage. This orchestrated stress response subsequently led to sustained endoplasmic reticulum (ER) stress and JNK pathway activation, culminating in DNA damage, impaired proliferation, and reduced cell viability. Taken together, our results identify the combination of MOT and AF as a promising and mechanistically grounded treatment regimen for advanced HCC (Graphical ). Graphical
✓ 已验证
DOI
PubMed
高影响因子
ChemSusChem
·
2026
·Vol. 19
·期 9
·e70704
·
IF 5.9
Qianran Feng,Jiawei Xie,Xinyuan Xu,Liuyun Chen,Zuzeng Qin,Tongming Su
Hydrogen energy, as a new, clean and renewable energy, has great potential to address the global energy crisis and environmental pollution. This study presents a ZnCo 2 S 4 /ZnIn 2 S 4 (ZCS/ZIS) heterojunction photocatalyst, where the charge transfer mechanism ingeniously transforms the role of ZnCo 2 S 4 . While individually photocatalytically inactive, ZnCo 2 S 4 becomes crucial in the ZCS/ZIS composite. Driven by a built-in electric field arising from their difference in Fermi level, a direct Z-scheme charge flow is established. This flow not only facilitates the separation of photogenerated electrons and holes at the interface but also, more importantly, activates ZnCo 2 S 4 as a primary electron aggregation site. Consequently, strongly reductive electrons are efficiently enriched on ZnCo 2 S 4 for the hydrogen evolution reaction. The optimized ZCS/ZIS composite achieves an exceptional H 2 production rate of 6.60 mmol g −1 h −1 under visible light, which is 9.3 times that of ZnIn 2 S 4 , with an apparent quantum yield of 7.96% at 400 nm. This work highlights the strategic design of charge dynamics to unlock the latent functionality of components within a Z-scheme system. Graphical This work constructs a ZnCo 2 S 4 /ZnIn 2 S 4 Z-scheme heterojunction, where the charge flow ingeniously transforms inactive ZnCo 2 S 4 into a crucial electron-aggregation site. This strategic design simultaneously achieves efficient charge separation and preserves high redox potential, leading to a dramatically enhanced photocatalytic H 2 evolution rate under visible light.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Meng Haofei,Gao Wei,Chen Yongping
Harvesting low-grade heat is a sustainable way to power wearable electronics, and quasi-solid-state ionic thermoelectric cells offer a flexible, low-cost option. Their use, however, has been limited by a key trade-off: miniaturization reduces the internal thermal gradient and compromises performance. Here, we address this challenge with an ultrathin asymmetric architecture that separates thermal energy harvesting from the conventional reliance on a sustained through-plane temperature gradient. The design couples thermally driven ionic modulation at one interface with engineered pseudocapacitive charge storage at the other. Our 1-mm-thick device delivers an open-circuit voltage of 0.1 V, a power density of 1.6 W m −2 , and an energy density of 1500 J m −2 using near-body heat. An array of 20 cells generates 1.9 V and a peak power of 23 W m −2 , enabling continuous smartwatch operation. This strategy provides a practical route to ultrathin ionic thermoelectric cells for self-powered wearable systems.
✓ 已验证
DOI
高影响因子
Cell Metabolism
·
2026
·
IF 37
Lili Li,Chenghui Yang,Zhen Wang,Bangyi Zhou,Yixin Zhang,Huiying Liu,Shanshan Sun,Mengyao Chen,Xiaoxiao Hu,Fang Jia,Sangsang Zhu,Miner Shao,Jun Pan,Leyi Zhang,Xinyi Zhang,Shuyan Yuan,Jingxuan Zhu,I. Situ,Jian Huang,Fuming Qiu
The gut microbiota is increasingly recognized as a contributor to breast cancer progression. Here, we report that the gut bacterium Enterocloster bolteae , a member of the Lachnospiraceae family, is progressively enriched during tumor development and is associated with increased levels of the microbiota-derived metabolite deoxycholic acid. Deoxycholic acid accumulates in tumors and activates the farnesoid X receptor in tumor cells, inducing interleukin-6 production through nuclear factor κB signaling. Interleukin-6 promotes the recruitment of granulocytic myeloid-derived suppressor cells and T helper 17 cells, establishing an immunosuppressive microenvironment. Inhibition or knockdown of the farnesoid X receptor, as well as blockade of interleukin-6 signaling, attenuates these effects. These findings identify a microbiota-metabolite-immune axis driving breast cancer progression and uncover microbial metabolites as potential therapeutic targets.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Yuqing Wang,Ruoyu Xing,Suyu Jin,Caimeng Zhang,Yufei Hua,Yeming Chen,Xiangzhen Kong
Globulins (7S/11S) were the dominant proteins of coconut milk. • The easier precipitation of 11S globulin partly resulted in the instability of coconut milk. • AP or UHT sterilization improved the stability of coconut milk. • Natural proteins (SPI and SC) could be good alternatives to Tween 80. • SC promoted key aroma compounds (e.g., ethyl decanoate/octanoate) of coconut. Coconut milk with high fat-to-protein ratio often encounters physical instability. Characterization of coconut protein could provide better understanding of the roles protein played in stability. The results showed coconut protein predominantly consisted of 11S globulin (53 kDa cocosin with acidic and basic polypeptides linked by disulfide bonds) and 7S globulin (53, 35, and 24 kDa). The easier precipitation of 11S globulin indicated poor emulsifying property, thus partly resulted in instability of coconut milk. Atmospheric pressure sterilization or ultra-high temperature instantaneous sterilization greatly improved the stability of coconut milk, with average particle size of about 4 μm. Furthermore, soy protein isolate or sodium caseinate, as alternatives to Tween 80, significantly enhanced coconut milk stability. Notably, sodium caseinate promoted coconut aroma with high odor activity values of ethyl decanoate/octanoate. This study provided valuable insights into protein characterization, sterilization, and natural protein substitution, offering a theoretical basis for better development of coconut milk. Download: Download high-res image (206KB) Download: Download full-size image
✓ 已验证
DOI
PubMed
高影响因子
Materials
·
2026
·Vol. 19
·期 10
·2029
·
IF 3.7
Changsheng Ye,Xin Shan
Ionic thermoelectric (i-TE) materials have attracted increasing attention for low-grade heat harvesting owing to their high thermovoltage output under small temperature gradients. However, the development ofn-type i-TE materials remains challenging. Electrode-enabled polarity regulation provides a promising alternative to material-design strategies for developingn-type i-TE devices. In this work, a poly(vinyl alcohol) (PVA)-based ionic hydrogel was prepared with dimethyl sulfoxide (DMSO) and potassium chloride (KCl) through a freeze–thaw process, and its thermoelectric behavior was regulated by electrodes. While the i-TE hydrogel device with typical Cu electrodes exhibitedp-type behavior, replacing the electrodes with graphite paper (GP) electrodes converted the device response fromp-type ton-type. Morphological and spectroscopic analyses suggest that the GP surface selectively adsorbed K+ions through cation–π interactions, suppressing cation thermodiffusion and enabling Cl−-dominated ion migration under a temperature gradient. As a result, the PVA-GP device achieved a maximumSiof −4.36 ± 0.26 mV K−1. In addition, the device exhibited favorable thermoelectric output, with a maximumPFiof 57.668 μW m−1K−2, a room-temperatureZTof 0.0864, and a peak transient power density of 2.33 mW m−2during short-time discharge. Owing to the large interfacial area of the GP electrodes, the device could also function as an ionic thermoelectric supercapacitor with appreciable energy-storage capability. This work demonstrates an effective electrode-engineering strategy for constructingn-type i-TE devices and provides a feasible route for simultaneous low-grade heat harvesting and transient energy storage.
✓ 已验证
DOI
PubMed
高影响因子