文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3109至3120个,产品总数3,650个

切换升序
S)
APPLIED CATALYSIS B-ENVIRONMENTAL · 2025 · IF 21.1

Synergistic dual-vacancies and La single-atom engineering over S-Scheme WS2-x/La1-WO2.9 heterojunction for efficient N2-to-NH3 photosynthesis

Kaiyang Shi,Changlin Yu,Jie Yuan,Weiya Huang,Kangqiang Lu,Zechao Zhuang,Jinrong Huo,Yu Xie,Erhuan Zhang,Dingsheng Wang,Kai Yang

Photocatalytic nitrogen fixation (PNF) under mild conditions is a promising approach to sustainable ammonia (NH 3 ) synthesis. However, PNF normally encounters many challenges, such as inefficient charge separation, poorly exposed active sites, and sluggish multi-electron/proton-involved steps. Here, we design a step (S)-scheme WS 2-x /La 1 -WO 2.9 heterojunction through integrating rich oxygen/sulfur dual-vacancies and loading rare-earth La single atoms. The as-prepared photocatalyst achieves a high NH 3 generation rate of 124.9 μmol∙g −1 ∙h −1 , which is 4.4, 1.7 and 1.2-fold those of pristine WO 3-x , WS 2-x and WS 2-x /WO 2.9 , respectively. Further in-depth characterizations and theoretical calculations reveal a synergistic photocatalytic effect in WS 2-x /La 1 -WO 2.9 , mainly due to the regulated collaborative dual defects and a lower energy d −π* occupation orbital from the modulation of La-modified W site. This leads to significantly reducing the reaction barrier in the rate-limiting step and elucidating the key intermediate processes (-NH 2 , -NH 2 NH 2 ) of the nitrogen fixation reaction. Our study creates a comprehensive strategy, analogous to the “three birds with one stone” method, offering new insights into advancing PNF.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2025 · IF 21.1

Regulating free radical species towards selective photocatalytic acetic acid synthesis from polylactic acid plastic over sulfur-doped BiVO4/In2S3 S-scheme heterojunction

Yongqian Cui,Xinxin Liang,Qibing Dong,Ximing Li,Yuqing Chen,Jingyi Wang,Ewa Kowalska,Antonio Otavio T. Patrocinio,Chuanyi Wang

Photocatalytic conversion of polylactic acid (PLA) plastic waste into value-added chemicals offers a promising approach for sustainable development. However, achieving high selectivity toward a desired product in the conversion remains challenging due to uncontrolled formation of oxygenated intermediates. Herein, we demonstrate a highly selective strategy for converting lactic acid (LA) derived from PLA hydrolysis into acetic acid, which is achieved by precisely regulating radical generation using a sulfur-doped BiVO 4 /In 2 S 3 (S-BiVO 4 /In 2 S 3 ) S-scheme heterojunction. DFT theoretical calculations and in-situ electron paramagnetic resonance results reveal that sulfur doping reduces the formation energy of V 4+ from V 5+ in BiVO 4 , facilitating electron transfer and O 2 dissociation. This promotes •OH radical generation via a proton-coupled electron transfer process by supplying protons to lower the •OH formation barrier. Consequently, •COCH 3 intermediates selectively interact with •OH radicals to form acetic acid. The optimized S-BiVO 4 /In 2 S 3 catalyst achieves an acetic acid generation rate of 3.97 mmol g −1 h −1 with an apparent quantum efficiency (AQE) of 1.42 % at 360 nm. Moreover, the acetic acid selectivity at S-BiVO 4 /In 2 S 3 reaches 84.3 %, which is significantly higher than that of its counterpart, pristine BiVO 4 (27.3 %). The present work opens a new avenue for designing efficient photocatalysts to selectively convert waste plastics into value-added products.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Water Process Engineering · 2025 · IF 6.7

Smartphone-assisted sensing platform based on S, Fe-doped carbon dots as efficient nano-enzyme for colorimetric detection of tetracycline in solution

Xinghao Liu,Xinru Zhang,Lingfei Ma,Zhichao Wang,Guohui Liu,Zhaoguang Yang,Zheng Xie

Understanding the real-time concentration levels of tetracycline (TC) in water environment was of great significance, which could avoid threats to ecological balance and human health. In this study, a colorimetric sensor based on S, Fe-doped carbon dot (S, Fe-doped CDs) was constructed for detection of TC. The S, Fe-doped CDs with excellent peroxidase-like activity were prepared via hydrothermal method, and they could catalyze H 2 O 2 to generate hydroxyl radical (•OH) and superoxide radical (•O 2 − ). The presence of S and Fe elements in CDs provided multiple active sites for chromogenic substrates. The colorimetric sensor for TC detection demonstrated good linear relationship ranged from 6 to 100 μg/mL, limit detection of 36 ng/mL, and it possessed excellent selectivity in presence of metal ions and organics. Furthermore, the visual detection platform coupled smartphone were established, which enabled rapid and accurate detection of TC in various environmental conditions. This study demonstrated great potential in the rapid monitoring of environmental pollutants, and combining functional nanomaterials with mobile technology had opened up new avenues for real-time detection in resource-limited environments.

CAS / MDL: 60-54-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
BIOMASS & BIOENERGY · 2025 · IF 5.8

Synergistic activation-doping strategy for constructing N/O/B/S Co-doped hierarchical porous carbon from wild jujube pit towards high-performance supercapacitors

Xu Liu,Zewang Liu,Haojie Chen,Guang zai Nong

This study developed a synergistic activation-doping strategy using Wild Jujube Pits as a carbon source. The K 2 CO 3 /(NH 4 ) 2 SO 4 /H 3 BO 3 ternary system synchronously modulates pore evolution and heteroatom doping, successfully constructing N/O/B/S-co-doped hierarchical porous carbon (JS1211). Characterisation results demonstrate that JS1211 possesses a high SSA of 1496 m 2  g −1 with hierarchical porosity (micropores: 0.4–0.8 nm; mesopores: 2–10 nm). XPS analysis confirms uniform co-doping of N (7.55 at%), B (6.04 at%), S (0.56 at%), and O (15.78 at%), where pyridinic-N (49.4 %) and BC 2 O (43.6 %) configurations dominate. DFT calculations reveal a three-tiered doping mechanism proceeding through structural distortion → electronic reconstruction → property optimisation. Electrochemical testing shows JS1211 delivers a specific capacitance of 411 F g −1 at 0.5 A g −1 , with 81.75 % capacity retention at 20 A g −1 and 97.31 % capacitance retention after 5000 cycles (Coulombic efficiency: 100.46 %). The assembled symmetric supercapacitor achieves an energy density of 12.85 Wh kg −1 (Power density: 129.71 W kg −1 ) in a 6 M KOH electrolyte, while retaining 7.85 Wh kg −1 at a power density of 10,335 W kg −1 . This work provides new insights for developing biomass-derived high-performance supercapacitor electrodes.

CAS / MDL: 584-08-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2026 · IF 8.8

Preparation and performance study of SPEEK/S-GO/NH2–SiO2/PPS composite proton exchange membrane based on acid–base cooperative topological conductive network

Maliang Zhang,Linlin Wang,Shuo Yang,Mengen Zhang,Ziang Mu,Yaru Wang,Xi Du,Zhenhuan Li,Bowen Cheng

This study uses polyphenylene sulfide (PPS) fiber paper as a skeletal support to fabricate a high-density, porous nonwoven support layer with excellent mechanical stability via wet papermaking. Sulfonated polyether ether ketone (SPEEK) is then cast onto its surface to form a continuous proton-conducting phase. Building on this foundation, synergistic doping with sulfonated graphene oxide (S-GO) and amino-modified silica (NH 2 –SiO 2 ) constructs a topologically interconnected proton exchange membrane structure exhibiting acid-base synergistic effects. The sulfonic acid groups on the S-GO surface act as high-density proton donors, providing continuous proton conduction sites. Meanwhile, the basic amino groups in NH 2 –SiO 2 form stable acid-base interactions and hydrogen-bond networks with sulfonic acids, effectively anchoring proton migration pathways, reducing disordered swelling, and extending proton hopping distances. This topologically interconnected acid-base synergistic network significantly enhances proton transport dominated by the Grotthuss mechanism while effectively suppressing methanol permeation. Performance testing reveals that the composite membrane with optimized doping ratio achieves proton conductivity up to 0.2 S cm −1 at 80 °C, with methanol permeability significantly lower than commercial Nafion-117 membranes. In direct methanol fuel cell testing, the composite membrane exhibited an open-circuit voltage of approximately 770 mV and a peak power density approaching 170 mW cm −2 , while demonstrating excellent thermal stability, oxidation resistance, and mechanical strength. These results demonstrate that constructing a topologically interconnected structure with synergistic acid-base interactions can effectively balance proton conductivity and fuel barrier performance, providing a viable new strategy for developing high-performance, low-cost proton exchange membrane materials.

CAS / MDL: 919-30-2 68-12-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Energy Technology · 2026 ·Vol. 14 ·期 8 ·e70612 · IF 3.6

CoFe/CoFe2O4 Embedded N, S-Doped Carbon Hybrid Derived From Sulfonate Asphalt as an Efficient Counter Electrode for Quantum Dot Sensitized Solar Cell

Jianguang Jia,Yue Cui,Chunfeng Shi,Haijun Hao

Developing a sustainable and cost-effective counter electrode (CE) material with high catalytic activity is of significant importance for quantum dot-sensitized solar cells (QDSSCs). In this work, by using the industrial residue material of sulfonated asphalt as the carbon precursor, we prepared a CoFe/CoFe 2 O 4 embedded N, S-doped carbon hybrid (CoFe/CoFe 2 O 4 @C) and applied to the CE of QDSSC. Structure analyses indicated that CoFe/CoFe 2 O 4 @C has a porous structure with large surface area. Electrochemical investigations revealed that the CoFe/CoFe 2 O 4 @C possesses high catalytic activity for polysulfide reduction. Consequently, CdSe QDSSC based on CoFe/CoFe 2 O 4 @C CE achieved a high power conversion efficiency (PCE) of 6.37%, significantly superior to the commonly used PbS CE (5.4%). This study provides a sustainable strategy for converting the industrial residue material of asphalt into a low-cost and high-performance CE material for QDSSC.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ELECTROANALYTICAL CHEMISTRY · 2026 · IF 4.6

S-scheme ZnIn2S4/α-Fe2O3 heterojunction with interfacial SO bonds accelerating the Fe3+/Fe2+ cycle for Photoelectro self-Fenton degradation of tetracycline hydrochloride

Yingying Chen,Zhihua Liu,Jinshan Liu,Miao Zhou,Zhifeng Liu

The visible-light-driven photoelectro-Fenton technology integrates the synergistic advantages of photoelectrocatalysis and the Fenton reaction. However, the design of current photoanode materials still suffers from issues such as low interfacial charge transfer efficiency and insufficient exposure of active sites. In this study, a novel S-scheme ZnIn 2 S 4 /α-Fe 2 O 3 heterojunction photoanode was successfully constructed. The built-in electric field established at the S-scheme heterointerface effectively facilitates the spatial separation of photogenerated charge carriers. The S O bonds formed at the two-phase interface serve as atomic-level electron transport channels, enabling rapid and directional transfer of photogenerated electrons enriched in the conduction band of ZnIn 2 S 4 to the Fe 3+ sites on the α-Fe 2 O 3 surface, where Fe 3+ is reduced to Fe 2+ . The generated Fe 2+ promotes the conversion of H 2 O 2 to produce hydroxyl radicals (·OH), while the regenerated Fe 3+ from the reaction is again reduced to Fe 2+ by photogenerated electrons, establishing a self-sustaining cycle that endows the system with highly efficient oxidative degradation capability. The results demonstrate that the synergistic mechanism leads to a 5.55-fold increase in the degradation rate. Benefiting from the efficient directional charge transfer and separation, the total organic carbon (TOC) removal efficiency reaches 80.09% within 60 min.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2026 · IF 9.1

Enhanced photocatalytic CO2 reduction over diatomite-supported TiO2@NH2-MIL-125 S-scheme heterojunction: Intensified charge separation driven by built-in electric field

Yi Wen,Chenguang Qian,Xiaohan Li,Ruizhe Sang,Fang Yuan,Chunquan Li,Zhiming Sun

The development of heterojunction photocatalysts is pivotal in enhancing charge transfer and inhibiting the recombination of photoexcited electron-hole pairs, which is an effective strategy to improve CO 2 conversion. In this study, we have been assembled the TiO 2 @NH 2 -MIL-125 S-scheme heterojunction on the surface of diatomite. Comprehensive characterization confirms the S-scheme charge transfer pathway, which not only promotes preferential accumulation of photogenerated charges at catalytically active sites but also enables rapid, low-resistance charge separation and migration. Meanwhile, the introduction of diatomite improves the dispersion of the active components and accelerates the separation of photogenerated carriers driven by the built-in electric field. Consequently, the TiO 2 @NH 2 -MIL-125/diatomite composite exhibits selective photocatalytic CO 2 to CO conversion without requiring sacrificial reagents. The composite achieves a CO evolution rate of 13.53 μmol g −1  h −1 , which is 2.20 times and 1.33 times higher than pure TiO 2 and the binary TiO 2 @NH 2 -MIL-125 composite, respectively. Furthermore, the composite maintains a stable CO production rate after three reaction cycles. This study presents an approach to designing mineral-supported S-scheme heterojunction photocatalysts for solar energy conversion applications.

CAS / MDL: 10312-55-7 68-12-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
EUROPEAN POLYMER JOURNAL · 2026 · IF 6.8

High heat-resistant transparent poly(amide-imide)s based on diacyl chloride containing imide and cyclohexane structures by ortho-methyl side group effect

Jinglei Xing,Yujie Zhang,Lei Yang,Tianci Ma,Yanling Wang,Xingzhong Fang,Long Wang,Guofei Chen

With the rapid development of flexible optoelectronic devices, higher requirements are placed on the heat resistance and transparency of colorless polyimide (CPI). In this study, two imide-containing diacyl chlorides derived from 1,2,4,5-cyclohexanetetracarboxylic dianhydride (HPMDA), HC-HPMDA and MC-HPMDA, were successfully designed and synthesized, and two series of poly(amide-imide)s (PAIs) were obtained by polymerization with 2,2′-bis(trifluoromethyl)benzidine (TFDB), 9,9-bis(4-aminophenyl)fluorene (FDA) and m -phenylenediamine ( m -PDA), respectively. The rigid amide bonds in the molecular chains could generate hydrogen bonds to enhance intermolecular forces. In addition, the introduction of the alicyclic structures disrupted the conjugation effect of the main chain to improve the transparency of the polymers. The obtained PAI films had high glass transition temperature ( T g  > 389 ℃), low coefficient of thermal expansion (CTE < 49.8 ppm/K) and excellent optical transparency. Therefore, the incorporation of imide rings and amide bonds into the main chain through polymerization with HPMDA-derived diacyl chloride provided a simple method for the synthesis of heat-resistant transparent PAIs. In addition, the introduction of CH 3 groups limited the movement of the chain segments, which improved the comprehensive properties of PAIs. In particular, PAI-TFDB-M exhibited high T g of 426 ℃, low CTE of 36.1 ppm/K, high transmittance of 87% at 400 nm and good mechanical properties with tensile strength of 140 MPa and tensile modulus of 4.2 GPa, which is expected to be applied in the field of flexible optoelectronics.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RARE METALS · 2026 ·Vol. 45 ·期 9 ·e70493 · IF 12.1

In Situ Engineering an S-Scheme MnS/MnB-MBene Heterojunction With Spatially Separated Redox Sites for Efficient H2 Evolution and 5-HMF Oxidation

Pei Li,Wei Quan,Weikang Ling,Yushun Han,Jimei Li,Guanlong Wang,Jiliang Ma,Runcang Sun

en This link goes to a English section zh This link goes to a Chinese section Photocatalytic H 2 evolution coupled with biomass upgrading offers a sustainable route for clean energy conversion and high-value chemical synthesis. Herein, an in situ grown S-scheme MnS/MnB-MBene heterojunction (denoted as SM x ) was fabricated via alkaline etching of Mn 2 AlB 2 followed by controlled sulfurization. This strategy effectively removes the Al layer, exposes abundant active sites, and simultaneously establishes an intimate S-scheme heterojunction that promotes spatial charge separation and boosts redox kinetics. The optimized SM6 catalyst achieves a remarkable H 2 evolution rate of 1704.81 μmol g −1 h −1 , along with 99.16% conversion of 5-HMF and 79.42% selectivity toward 5-hydroxymethyl-2-furoic acid (HMFCA). These values correspond to 15.97-fold and 7.7-fold enhancements in H 2 evolution compared to pristine Mn 2 AlB 2 and MnB-MBene, respectively. The spatially separated redox sites—MnB-MBene as oxidation sites and MnS as reduction sites—enable efficient, site-specific catalytic reactions, significantly enhancing overall performance. This study provides a rational design strategy for MBene-based heterojunctions and offers insights into advancing biomass photorefinery coupled with solar fuel production. 摘要 en This link goes to a English section zh This link goes to a Chinese section 光催化析氢耦合生物质高值化转化, 为清洁能源转化与高附加值化学品合成开辟了一条可持续路径。本文通过对Mn 2 AlB 2 进行碱刻蚀并结合可控硫化处理, 原位制备出S型异质结MnS/MnB-MBene复合材料 (记作SM x )。该制备策略可有效去除铝原子层, 暴露出大量活性位点, 同时构建紧密的S型异质结, 进而促进载流子空间分离、加快氧化还原反应动力学过程。经优化的SM6催化剂表现出优异性能:光催化析氢速率达1704.81 μmol g −1 h −1 , 5-羟甲基糠醛(5-HMF)转化率为99.16%, 对5-羟甲基糠醛酸(HMFCA)的选择性达79.42%。相较于纯Mn 2 AlB 2 与MnB-MBene, 其析氢活性分别提升15.97倍和7.7倍。体系中氧化还原位点实现空间分离:MnB-MBene作为氧化活性位点, MnS作为还原活性位点, 可实现位点专一的高效催化反应, 大幅提升整体催化性能。本研究为基于MBene的异质结催化剂提供了合理的设计思路, 也为光驱动生物质精炼耦合太阳能燃料制备领域的发展提供了理论参考。

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Simultaneous enhancement of thermal conductivity and EMI shielding in silicone rubber composites enabled by upcycled pyrrhotite tailings and S doped carbon nitride heterojunctions

Han Sun,Hui Wang,Hongru Jiang,Yingshuang Zhang,Chongqing Wang

Pyrrhotite tailings are upcycled into multifunctional silicone rubber composites. • S-doping induces robust SCN/Pyr heterojunctions via Fe-S-C interfacial linkages. • SCN nanosheets serve as phonon bridges to significantly reduce interfacial thermal resistance. • Simultaneous achievement of high TC (1.63 W/m·K) and EMI shielding (40 dB). The relentless miniaturization and densification of modern electronics have precipitated an urgent demand for materials that offer both efficient thermal management and robust electromagnetic interference (EMI) shielding. While utilizing industrial waste for such high-performance applications presents a sustainable pathway, bridging the performance gap in traditional polymer composites remains a challenge due to high interfacial thermal resistance. Herein, we propose a functionalization of waste strategy by engineering a multifunctional silicone rubber (SR) nanocomposite that synergizes pyrrhotite (Pyr) tailings with S doped graphitic carbon nitride (SCN). Specifically, SCN serves as a functional bridge, creating a heterojunction with Pyr that optimizes interfacial compatibility and phonon transport. Consequently, the fabricated SCN/Pyr/SR composite delivers a high thermal conductivity (TC) 1.63 W/(m·K) alongside outstanding electrical insulation with a resistivity exceeding 10 10  Ω·m. Furthermore, it delivers EMI shielding effectiveness of up to 40 dB in the 8.2–12.4 GHz frequency range with absorption being the main mechanism, underscoring its excellent shielding capability. Beyond these primary metrics, the composite demonstrates exceptional reliability in terms of thermal cycling stability, mechanical performance, and water resistance. This work not only provides a high-efficiency solution for thermal and EMI management, but also validates a sustainable route for upcycling bulk sulfide solid wastes to improve the environmental friendliness and the application potential of the composite. Download: Download high-res image (151KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Food Bioscience · 2026 · IF 6.2

Synthesis of N, S-co-doped carbon quantum dots derived from coralline algae polysaccharide and their application for grape preservation in gelatin films

Libo Wang,Xuan Fu,Kerou Gao,Yuhan Song,Hongda Zhang,Yanhui Wei,Kun Cheng

In this study, N and S-co-doped carbon quantum dots (CAP-U-CQDs) were prepared using coralline algae polysaccharide (CAP) and urea as precursors. CAP-U-CQDs displayed quasi-spherical morphology with an average size of 3.90 ± 0.48 nm, high quantum yield (QY) of 24.37%, excellent fluorescence stability and significant antioxidant activity. CAP-U-CQDs were incorporated into gelatin to develop the functional packaging films (0.5%CQDs/GEL, 1.0%CQDs/GEL, and 1.5%CQDs/GEL) for fruit preservation. SEM, FT-IR and XRD analyses confirmed the strong compatibility and potential hydrogen bonding between CAP-U-CQDs and the matrix. UV-blocking capability, mechanical properties, and hydrophobicity of CQDs/GEL films were greatly improved when the CAP-U-CQDs amount was 1.0% (wt%). Additionally, 1.0%CQDs/GEL film showed strong antibacterial capacity and favorable biosafety. Grape preservation tests demonstrated that the 1.0%CQDs/GEL film effectively protected grapes over 24 days of storage, as evidenced by reduced weight loss, maintained firmness, slowed acid degradation, and inhibited the increase of pH. This study offered a sustainable approach for producing multifunctional CQDs from marine polysaccharides and demonstrated the potential of biodegradable composite films for food packaging and preservation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。