文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3121至3132个,产品总数6,840个

切换升序
CO2
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

Low-energy electrochemical CO2-amine desorption driven by the proton-coupled electron transfer reaction (PCET)

Feng Zhao,Yimin Deng,Miyi Li,Can Lv,Tejraj M. Aminabhavi,Ozge Yuksel Orhan,Helei Liu

The CO 2 desorption in amine-based carbon capture processing is accompanied by significant energy consumption, accounting nearly 70% of energy requirements of the entire process. Electrochemical CO 2 capture and release are promising technologies to reduce the energy consumption. The characteristics and CO 2 desorption performance of QH 2 (Tiron) in tertiary amine systems are investigated in this research. The reducing ability of Q (Oxidized QH 2 ) was improved by modifying the electrode to achieve low-energy electrochemical desorption. The CO 2 electrochemical desorption achieved low-energy CO 2 desorption of 0.7 GJ ton −1 CO 2 against over 2.4 GJ ton −1 in a conventional and mature MEA-based system.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Omega · 2025 · IF 4.3

Experimental Study on the Optimization of CO2 Flooding Miscibility-Reducing Agents for Low Permeability Reservoirs

Shuaishuai Zhao,Li Liu,Zhihao Li,Xuliang Fan,Zhiqiang Wang,Mengyi Xing,Fushan Li

CO2 flooding is one of the paramount approaches to ameliorating the oil recovery rate of low-permeability reservoirs. Additionally, the physical and geological characteristics of low-permeability reservoir crude oil are less desirable owing to the influence of continental sedimentary structures. The minimum miscibility pressure (MMP) between CO2 and crude oil is generally higher than the formation fracture pressure, thereby rendering it difficult for CO2 to form miscibility with crude oil. Under such circumstances, a miscibility-reducing agent can be adopted to lower the miscibility pressure between CO2 and crude oil, thus achieving CO2 oil miscible phase flooding and elevating recovery efficiency. This paper first selected the most effective miscibility-reducing agent through molecular simulation experiments and core displacement experiments, and subsequently evaluated the injection effect of the miscibility-reducing agent on heightening the recovery rate of CO2 flooding in low-permeability reservoir cores. This research obtained the effect of the miscibility-reducing agents on the aggregation degree of CO2 molecules and asphaltene molecules during the oil gas mixing process from the radial distribution function and analyzed its function mechanism. On this basis, the core flooding experiment method was adopted to screen for the optimal miscibility-reducing agent with the best miscibility-reducing agent effect. Afterward, the impact of miscibility-reducing agent injection on the CO2 flooding development effect of the low-permeability core was evaluated systematically. As demonstrated by the molecular simulation results, selected miscibility-reducing agents displayed desirable electron transfer ability with CO2; Triisobutyl citrate can effectively heighten the aggregation degree of CO2 molecules and lessen the aggregation degree of asphaltene molecules, with the most conspicuous effect; The results of the core flooding experiment revealed that upon the injection of triisobutyl citrate, the MMP reduction between CO2 and crude oil exhibited the most remarkable trend, so it was selected as the best miscibility-reducing agent. The mechanism by which triisobutyl citrate can effectively reduce MMP mainly includes lowering crude oil viscosity and oil gas interfacial tension, and promoting the CO2 extraction ability. The indoor three-dimensional well network model CO2 flooding experiment results suggested that after injecting 0.07 PV of triisobutyl citrate preflush slug, the CO2 flooding recovery rate increased from 47.78% OOIP without the injection of miscibility-reducing agents to 59.86% OOIP. The selected triisobutyl citrate displayed a striking effect on augmenting the CO2 flooding recovery rate of low-permeability reservoirs. The research results provide a reference and inspiration for the high-quality and efficient development of CO2 flooding in low-permeability oil reservoirs.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2024 · IF 8.1

Aluminum-enhanced Ca-based CO2 sorbents: Core-shell assembly and the impact of stabilizer precursors

Kaiwen Ma,Jian Sun,Rongyue Sun,Chuanwen Zhao

Lately, Ca-based sorbents with a core–shell structure have been effectively produced to augment the sorbent’s capabilities. However, modifying the pristine core of Ca-based pellets with a core–shell structure notably influences the performance of the synthesized sorbent, and research in this domain remains scarce. Here, two categories of Al-stabilized, Ca-based pristine cores were produced using Ca(OH) 2 mixed with Al-based stabilizer precursors of insoluble aluminum oxide and soluble aluminum nitrate, respectively, through the extrusion-spheronization technique. Due to the impact of mechanical extrusion, soluble aluminum nitrate can accumulate in-homogeneously in the Ca-based pristine core, leading to its expansion and rupture during the high-temperature calcination stage because of the decomposition of aluminum nitrate. The oxide-form aluminum stabilizer precursor can be uniformly distributed throughout the Ca-based pristine core pellets, demonstrating notably superior cyclic CO 2 sorption capability and mechanical strength. The Al-fortified, core–shell structured Ca-based sorbent pellets demonstrated a peak CaO carbonation conversion rate of 54.8 % after 100 cycles when the Ca:Al molar ratio was precisely set to 85:15, which is about 2.1 times higher compared to the core–shell Ca-based sorbent pellets composed of a pure CaO core. This is primarily due to the formation of an evenly distributed inert Ca 12 Al 14 O 33 within the pristine core, which effectively reduces high-temperature sintering. Hence, core–shell Ca-based sorbent pellet assembled with an Al-stabilized pristine core, could be a promising candidate for application in the CaL process for CO 2 capture.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Molecular Catalysis · 2024 · IF 3.9

Two 2D layered Co-modified Anderson-type polyoxometalate-based highly efficient photocatalysts for CO2 reduction

Pinfang Yan,Xinyu Li,Jilei Wang,Jiahang Pan,Hu Xu,Yinhua Zhu,Qiaoling Chen,Hua Mei,Yan Xu

The design of efficient and low-price photocatalysts is an effective way to relieve excessive carbon dioxide emissions and energy dilemma. Polyoxometalates are ideal materials due to their adjustable structures and semiconductor-like properties. Limited by their light absorption capacity, it is a feasible way to construct inorganic-organic composite polyoxometalate-based photocatalysts. Here, two efficient Anderson-type polyoxometalate-based photocatalysts, (C 10 H 9 N 2 )·{[Co(H 2 O) 2 ]·[H 6 CrMo 6 O 24 ]}·4H 2 O ( 1 ), {[Co(H 2 O) 3 ]·[Co(DAPSC)] 2 ·[H 6 CrMo 6 O 24 ] 2 }·11H 2 O ( 2 ) [2,6-diacetylpyridine bis(semicarbazone), abbr. DAPSC], were prepared by hydrothermal synthesis method. The structural analysis indicates that compounds 1 and 2 share similarities: {CrMo 6 } units were linked by cobalt ions to form two-dimensional (2D) frameworks. The addition of Co ions provided catalytic active center for the catalyst, compounds 1 and 2 exhibited promising yield into CO, as high as 3061.6 μ mol g −1 ·h −1 and 9309.8 μ mol g −1 ·h −1 , respectively. Due to their excellent properties, Anderson-type POMs can be used as the basic units of photocatalysts. At the same time, four cycling tests prove the stability of compound 2 under a long reaction time.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2024 · IF 10.7

Repurposing E-Waste Cathodes as Catalysts for CO2 Reduction via Reverse Water-Gas Shift Reaction

Zhihao Zhou,Siyuan Duan,Guangze Nie,Zhenkun Sun,Lunbo Duan

Reverse water-gas shift (RWGS) reaction offers a promising pathway for utilising green H2 to reduce CO2 into CO, a valuable precursor for e-fuel production. Conventional catalyst synthesis methods, however, often rely on costly and complex procedures using fine chemical precursors. In this study, we repurpose retired ternary lithium-ion battery cathodes (rTLIBCs), prevalent e-waste from the electric vehicle industry, as catalysts for the RWGS reaction. Using a straightforward method of mixing rTLIBC material with Al2O3 powder, we successfully synthesise xNCM/Al2O3 catalysts with high CO2 conversion and CO selectivity. Notably, the 10NCM/Al2O3 catalyst demonstrates the highest CO space-time yield at 450–600 °C, with stable performance across long-term tests, maintaining CO2 conversion, CO selectivity, and CO space-time yield. The performance of our prepared catalyst is comparable to that of the best catalysts synthesised using fine chemicals. The high catalytic performance is attributed to the synergistic effect of a Ni-Co bimetallic alloy formed during pretreatment, strong metal-support interaction, and alkali metal Li. Ni-Co alloy formation optimises the catalytic activity and selectivity, the metal-support interaction enhances CO2 activation, and Li boosts basicity and fine-tunes the reaction pathway. This study validates that rTLIBCs are a viable raw material for practical RWGS catalyst synthesis, providing a sustainable alternative for e-waste utilisation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2025 · IF 9.7

Boosting electrochemical CO2 reduction by strong electronic interaction at the interface of Bi/SnO2 heterostructures

Zeyu Wang,Yaling Jia,Shangqing Zhao,Huiling Zheng,Antony Rajendran,Wen-Ying Li

SnO 2 -based materials are promising electrocatalysts for the conversion of CO 2 to formate however increasing their activity further is challenging due to the suboptimal CO 2 adsorption and activation capacity. The interfacial engineering has proven effective in modulating the electronic structure and adsorption behavior of electrocatalysts. Herein, a heterostructure Bi/SnO 2 was constructed for the CO 2 electroreduction to formate in which a formate Faraday efficiency of 94.9 % and single-pass carbon efficiency of 40.3 % were achieved at −1.0 V versus reversible hydrogen electrode in 1.0 M KOH. During a 30-hour stability test, the current density was nearly constant without a significant decrease while the formate Faraday efficiency was maintained around 90 %. This remarkable activity is attributed to the strong electronic interaction arising from p–p orbital coupling at the Bi/SnO 2 interface, according to the experimental and theoretical investigations. The computational insights suggest that the p–p orbital coupling promotes the electron transfer from Bi to SnO 2 and optimizes the adsorption strength of the intermediate (*OCHO) to enhance the catalytic activity. The formation of *OCHO during formate generation was confirmed by the i n situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy. This work might contribute key insights into the mechanisms underlying activity enhancement via strong electronic interaction between dual p- block metal catalysts.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2025 · IF 9

PIM-1 membrane incorporated cPIM-1 grafted PP-DETA for high-efficiency CO2/N2 separation

Shuangqi Song,Hong Li,Jingde Li,Yanqin Yang

Mixed-matrix membranes (MMMs), developed through the combination of solid fillers with polymer matrices, represent an effective approach addressing the persistent challenge of balancing permeability and selectivity in polymer membrane. Diethylenetriamine-functionalized porous material of PP-DETA, which is synthesized from porous organic polymer of PP via one-step diethylenetriamine grafting, is an ideal material for MMMs production. However, designing and optimizing PP-DETA for high-performance CO 2 separation membranes remains a challenge. Herein, we develop an improved PP-DETA material, designated as PP-DETA-cPIM-1, by covalently attaching a carboxylated polymer of intrinsic microporosity (cPIM-1) network layer onto the PP-DETA surface. Membranes prepared from this PP-DETA-cPIM-1 filler and PIM-1 matrix demonstrate enhanced interfacial adhesion and stronger mechanical properties in comparison to the counterparts with the same loading of PP-DETA. The incorporation of PP-DETA-cPIM-1 into MMMs establishes an enhanced filler/polymer interface that facilitates the selective transport of CO 2 through the filler, while simultaneously improving membrane stability and suppressing physical aging. Specifically, with 5 wt% loading of PP-DETA-cPIM-1 filler, the MMM is able to enhance the CO 2 /N 2 selectivity and CO 2 permeability by 52.3 % and 25.3 %, respectively, exceeding the upper bound established in 2008. Furthermore, PP-DETA-cPIM-1/PIM-1 MMMs display superior anti-aging ability for 180 days of aging.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY · 2025 · IF 4.7

Polymer Brush-Grafted Metal–Organic Framework Nanoplates for Enhanced Catalysis of CO2 Cycloaddition with Epoxides

Shunsheng Ye,Feng Wang,Liying Zhang,Fuqiang Fan,Xuemin Zhang,Tieqiang Wang,Yu Fu

The catalytic performance of 2D nanostructure-based heterogeneous catalysts is highly dependent on their dispersibility and stability. This work presents the grafting of polymer brushes onto 2D Cu-based metal–organic framework (MOF) nanoplates via a versatile UV-induced radical polymerization approach for CO2 fixation through the cycloaddition reaction with epoxides. The polymer brushes are selectively anchored to the external surfaces of the nanoplates, which greatly improves the long-term dispersibility and stability in solvents while preserving their intrinsic porosity and crystalline structures. The poly(N,N-dimethylaminoethyl methacrylate)-grafted 2-aminoterephthalic acid copper (CuBDC-NH2@PDMAEMA) nanoplates, with an optimized polymer brush thickness, achieve a maximum yield of 81.2% in the cycloaddition of CO2 with styrene oxide, which is a 1.6-fold improvement over that of the unmodified CuBDC-NH2 nanoplates. The grafted nanoplates also exhibit excellent recyclability with a slight decrease in yield after multiple consecutive cycles. The versatility of this approach is further demonstrated by its application to other polymers and epoxide substrates, where polymer-grafted catalysts consistently outperform their pristine counterparts. Our strategy provides a feasible and efficient route to synthesize MOF/polymer hybrid nanomaterials for sustainable CO2 utilization and green chemistry applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
BIORESOURCE TECHNOLOGY · 2025 · IF 9

Exogenous arginine induced metabolic modulation and biomass enhancement in Nannochloropsis oceanica under high CO2 stress

Ruixue Ma,Jun Cheng,Ying Liu,Dongwei Jia,Jiahao Wang

Given that excessive CO 2 induces reactive oxygen species (ROS) which inhibit photosynthesis and microalgal survival, this study explores how exogenous arginine enhances stress resilience and biomass yield of Nannochloropsis oceanica under high CO 2 stress. Arginine promoted NO synthesis, enhancing antioxidant enzyme activities to combat ROS damage. Transcriptomic analysis revealed that key enzymes in the Calvin cycle (PRK, GAPDH, FBPase and SBPase) and TCA cycle (CS, IDH, SCS and MDH) were significantly up-regulated, supporting carbon fixation and energy metabolism. Arginine also alleviated cell necrosis by extending the G1 phase, promoting DNA replication and protein synthesis, which increased the proportion of viable cells from 47 % to 84 %. Furthermore, the synthesis of chlorophyll a and carotenoid were enhanced, leading to 46 % increase in biomass yield. The results highlighted arginine as a promising metabolic regulator for enhancing stress tolerance and carbon fixation efficiency of N. oceanica under high CO 2 conditions.

CAS / MDL: 74-79-3
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
RESEARCH ON CHEMICAL INTERMEDIATES · 2025 · IF 3.5

Potential-induced synthesis of cavity Cu2O/Cu nanocubes for enhanced electroreduced CO2 to C2+ products

Hu Yaping,Zhai Shasha,Guo Yaping,Dang Shan,Li Jing,Yang Miao

Electrochemical reduction reaction of CO 2 (CO 2 RR) to C 1 and C 2 products can be achieved on Cu-based electrocatalysts. C 2 products exhibit higher energy density and economic value compared to C 1 products, making them more desirable as reduction products. However, the production of C 2 products on pure Cu catalysts involves multi-step proton-coupled electron transfer and C–C coupling steps, which are kinetically slow and result in poor catalytic activity and selectivity for the products. The cavity nanocubes Cu 2 O(0.13-AA), Cu 2 O(0.10-AA) and Cu 2 O(0.15-AA) catalysts were synthesized via wet chemical reduction by adjusting the concentration of the reducing agent. The electrochemical pre-reduction method was used to obtain Cu 2 O/Cu(0.13-AA), Cu 2 O/Cu(0.10-AA) and Cu 2 O/Cu(0.15-AA) catalysts for CO 2 RR. Cu 2 O/Cu(0.13 M-AA) catalyst achieves the high Faradaic efficiency (FE) of 39.98% for C 2 H 4 and 54.76% for C 2 products (C 2 H 4 , C 2 H 6 , and C 2 H 5 OH), with significant inhibition of the hydrogen evolution reaction. In situ Raman experiments demonstrate that the cavity structure of the nanocubes enhances the local concentration of *CO intermediates, thereby promoting the C–C coupling process and improving the selectivity of CO 2 reduction to C 2 products.

CAS / MDL: 10125-13-0 50-81-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2025 · IF 7.2

One-step electrodeposition of liquid alloys from choline chloride-urea eutectic solvent for CO2 electroreduction

Yulan Xu,Minxian Wu,Xianxian Zhang,Zhihui Zhang,Yanli Chen,Haiguang Gao,Huazhang Guo,Wenchang Wang,Naotoshi Mitsuzaki,Zhidong Chen

Ga-Sn liquid metal catalysts exhibit high activity in the electrochemical conversion of CO 2 to formic acid. However, achieving high current densities for industrial-scale production is still challenging. A facile one-step electrodeposition method for preparing Ga-Sn thin films on metal foam substrates was proposed. A deep eutectic solvent consisting of choline chloride and urea, which is known as Reline, was used as the electrolyte solvent. The electrochemical behaviors of Sn(II)/Sn(0) and Ga(III)/Ga(0) in Reline were studied on a Pt rotating disk electrode. The diffusion coefficient and exchange current density of Sn(II) and Ga(III) in this electrolyte were determined by the Koutecký-Levich equation. Ga91.6Sn8.4 thin liquid film was electrodeposited on a copper foam substrate and used as the catalytic electrode for electrochemical reduction of CO 2 in a CO 2 -saturated 0.1 M KHCO 3 solution, and a high Faradaic efficiency (90 %) for HCOOH was achieved. Density functional theory (DFT) simulations were conducted to gain deeper insight into the role of the alloy in the CO 2 reduction reaction (CO 2 RR). The results indicate that the incorporation of Sn into the alloy not only introduces additional active sites for *OCHO adsorption but also facilitates the conversion of *COOH intermediates to formate.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
DALTON TRANSACTIONS · 2025 · IF 3.3

Green and high yield synthesis bimetallic zeolitic imidazole framework-67 for efficient catalytic CO2 cycloaddition

Chaonan Wang,Kaixuan Guo,Zhonghan Cheng,Chongli Wang,Duozhen Chai,Dongfeng Cao,Ye Yuan,Somboon Chaemchuen

Metal-organic frameworks (MOFs) with ZIF-67 have been widely studied. Incorporating multi-bimetals into ZIF-67 offers a strategic approach to leverage unique properties and address the limitations of traditional single-metal in ZIF-67. An environmentally friendly solid-state thermal (SST) method to simultaneously incorporate heterometals (Cu, Fe, Ru, Pd, Mn, and Ni) into the ZIF structure, referred to as M@ZIF-67, is developed. The synthesis occurs in a single step, utilizing thermally-treated mixed solid precursors of multi-bimetals and imidazole ligands without additional agents or solvents, which is the innovative green route to approach multi-bimetals ZIFs. Multiple techniques confirm that heterometals are homogeneous, uniform, and precised metal content in the iso-structure of ZIF-67. Interestingly, synthesizing M@ZIF-67 through the SST method achieves a scalable and high yield. Furthermore, the M@ZIF-67 exhibits a precise heterometal content, which plays a crucial role in enhancing the catalytic performance of CO2 cycloaddition, surpassing results obtained through traditional ZIF-67.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。