SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2025
·
IF 4.6
Liuyan Wei,Ying Yang,Hailin Zhang,Huisha Huang,Xiaotong Zhang,Dandan Hou,Chujun Qin,Suxuan Liao,Zhiheng Su,Mei Li
Monitoring uric acid (UA) level in body fluids is of great significance for clinical diagnosis and treatment of related diseases. Herein, we introduce a simple smartphone-assisted colorimetric sensing platform for detection of UA. The experiment exhibited that the peroxidase-like activity of copper-doped Prussian blue (CuPB) could be enhanced by the doping of Cu element on Prussian blue. CuPB displayed excellent peroxidase-like activity and efficiently catalyze the oxidation of 2,2-diazo-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) in the presence of H 2 O 2 to generate a colored radical cation ABTS + , resulting in a absorbance and color-based RGB intensity dual signal output. Hence, a reliable colorimetric and color-based-smartphone assay for detection of UA was constructed based on CuPB-mediated the peroxidase-like activity and UA-trigged inhibition of the ABTS oxidation reaction catalyzed by CuPB. The color change is collected by the built-in camera of smartphone, and the RGB intensity of sample images was processed by Image J. The sensing platform was used for highly sensitive colorimetric and portable detection of UA in human urine within 6 min with a wide range of linear response from 0.1 to 80 μM, a limit of quantitation of 0.10 μM and a low limit of detection of 0.041 μM (3σ rule). This work demonstrates a novel and versatile strategy to develop superior peroxidase mimics and holds great potential for rapid and portable detection of UA in urine, healthcare and clinical diagnosis, and also open promising avenues for the nursing point detection of UA.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Omega
·
2024
·
IF 3.7
Duy-Nam Phan,Thi Ngat Tran,Phuong-Linh Nguyen,Minh Thang Le,Azeem Ullah,Ick-Soo Kim
Cu-doping contents in the TiO2 lattice structure were studied to show the effects on the crystal structure, morphology, and photocatalytic activity of TiO2 nanoparticles and thus composite cellulosic nanofibrous membranes. Pristine and copper-doped TiO2 nanoparticles were synthesized using the sol–gel technique, a wet chemical method with the advantages of low synthesizing temperature, uniform nanosize distribution, and purity. The as-synthesized semiconductor nanoparticles were first tested with the dye removal process and then impregnated onto electrospun cellulose nanofibers (CL nanofibers) to acquire modified nanofibers with self-cleaning properties. The as-prepared composite CL nanofibers consisting of doped and undoped TiO2 nanoparticles were characterized by various techniques, such as field emission scanning electron microscopy, transmission electron microscopy, UV–vis, X-ray diffraction, Fourier transform infrared spectroscopy, and tensile tests. The copper-doped TiO2 molar ratio in the nanocomposite was found to possess a pronounced impact on the dye removal and self-cleaning effects under the visible light spectrum, whereas TiO2 is highly effective under specific UV-light irradiation. Optical measurements and dye decomposition showed that the Cu-doped TiO2 nanocomposite was optimized at a 1% molar ratio by the copper-doping concentration regarding dye removal and self-cleaning applications under the visible light range.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanoscale
·
2024
·Vol. 16
·期 28
·13642-13653
·
IF 5.8
Ziyin Yang,Chongchao Zhang,Chengcheng Qi
Which is more suitable as a sensing material between metal single-atoms and nanoparticles? Herein, electrocatalytic behaviors of copper single-atoms (Cu SAs) and copper nanoparticles (CuNPs) toward H2O2 reduction and glucose oxidation were studied. Surprisingly, the electrocatalytic activity of Cu SAs and CuNPs showed significant differences in H2O2 reduction and glucose oxidation. Compared with CuNPs, Cu SAs exhibit outstanding activity in the electrocatalytic reduction of H2O2 but exhibit weak activity in the electrocatalytic oxidation of glucose. On the contrary, CuNPs exhibit excellent activity in the electrochemical oxidation of glucose but have very weak electrocatalytic activity towards H2O2 reduction. DFT results show that H2O2 reduction is more favourable with Cu SAs; however, the electrochemical oxidation of glucose with CuNPs requires overcoming much lower energy barriers than that with Cu SAs. This study proves that both metal single-atoms and nanoparticles are not omnipotent, which provides ideas for constructing highly active sensing materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CATALYSIS TODAY
·
2024
·
IF 5.2
Shuanglin Jia,Wenhao Yang,Hao Liu,Xiao Chen,Jingjie Luo,Changhai Liang
Furfural is an indispensable platform compound derived from biomass resource and can be hydrogenated to produce a series of high value-added chemicals. In order to overcome the disadvantages of low selectivity and poor stability during furfural hydrogenation, design of promising Cu catalysts with well-disentangled catalytic theory becomes a hot topic. In this work, a series of Cu-M/Al 2 O 3 (M=Fe, Co, Ni, Ce) catalysts were prepared by sol-gel method to make a uniform ternary metal composition. Distinctive product distribution for the catalytic transfer hydrogenation of furfural was obtained depending on the specific Cu-M/Al 2 O 3 system. Among them, the Cu-Fe/Al 2 O 3 displayed superior selectivity of 2-methylfuran compared to any other catalysts. The introduced metal additive acted as the electron donor to regulate the surface dispersion of Cu species. Higher percentage of surface Cu 0 +Cu + species were formed on Cu-Ce/Al 2 O 3 and Cu-Fe/Al 2 O 3 , accounting for the much lower activation energy and better dissociation ability for isoproponal. If Cu-Ni/Al 2 O 3 or Cu-Ce/Al 2 O 3 was used as the catalyst, hydrogenation happened on the furan ring. Whilst Cu-Co/Al 2 O 3 was more preferentially used to produce 2-pentanol and 2-pentanone, with large amount of copper species in oxidative states. The yield of 2-MF reached 84 % at 220 ºC in N 2 at ordinary pressure by Cu-Fe/Al 2 O 3 with the specific rate of 106.8 mmol FAL ·g Cu −1 ·h −1 .
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2024
·Vol. 12
·期 12
·6968-6982
·
IF 10.7
Jing Qi,Chengkai Lin,Shuqi Deng,Yinze Zuo,Hui Zheng,Xuechao Jiao,Wei Yan,Jiujun Zhang
Potassium (K) with higher abundance than lithium has been explored as an anode material for K metal batteries (KMBs) for possible application in large-scale energy storage. However, the unstable solid electrolyte interface (SEI) at the K anode due to uncontrolled growth of K dendrites is a challenge in KMB development. In this paper, a multifunctional interface containing Sb2O3 and reduced graphene oxide (rGO) on Cu foam to form a current collector (Cu@Sb2O3@rGO) is developed for a KMB anode through structural regulation, where the Cu form with a large surface area can reduce the volume change during charge and discharge processes, Sb2O3 can provide potassiophilicity toward uniform K plating and stripping to give a dendrite-free K anode, and rGO can provide abundant defects for increasing the ion transport and reaction kinetics. Such a Cu@Sb2O3@rGO current collector exhibits a remarkable reversibility of K plating/stripping for up to 600 cycles at 0.5 mA cm−2/2 mA h cm−2, and the formed Cu@Sb2O3@rGO@K anode demonstrates an extended cycle lifespan of 1300 hours under 0.2 mA cm−2/0.2 mA h cm−2 in symmetric cells. This anode-constructed PTCDA‖ Cu@Sb2O3@rGO@K full battery exhibits both exceptional cycling stability (over 2000 cycles) and outstanding rate capability (112.8 mA h g−1 at 10 C). Furthermore, even under extremely low temperature (−20 °C), this battery can still maintain an impressive 55% of its room temperature capacity. In situ Raman spectroscopic techniques and electrochemical methods including in situ EIS, half cell, symmetric cell, and full cell tests and theoretical DFT calculations are carried out to probe the structure–performance relationship and the reaction mechanisms for fundamental understanding toward further optimizing the performance of such the K anode and the corresponding KMBs. The strategy for stabilizing the K metal anode in this work may provide a guidance for further development of advanced low-temperature potassium metal batteries.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2025
·
IF 16
Yuanbo Yin,Liping Wang,Huishan Shang,Xilin Zhang,Wenxing Chen,Xiaoxin Zou
Double-atom catalysts (DACs) with asymmetric coordination are crucial for enhancing the benefits of electrochemical reduction of nitrate (NO3–) to ammonia (NH3) and advancing sustainable development; however, the rational design of DACs is still challenging. In this study, we synthesized atomically dispersed catalysts with lateral coordination sulfur-modified Cu–Ru sites (named N2S1Cu-RuN3/SNC). The abundant defects and low-electronegativity heteroatoms in the carbon-based framework endow the asymmetric local structure of N2S1Cu-RuN3 at the atomic level, which is confirmed by aberration-corrected electron microscopy and X-ray absorption spectroscopy (XAS). In electrocatalytic nitrate reduction, the N2S1Cu-RuN3/SNC shows a Faraday efficiency of 98.2% at −0.6 V versus reversible hydrogen electrode (RHE). Benefiting from the charge tuning effect between the metal site and the lateral coordination sulfur atoms, the ammonia yield reaches 0.02919 mmol cm–2 h–1. Additionally, in situ XAS and density functional theory (DFT) calculations reveal that Cu–Ru active sites in the asymmetric N2S1Cu-RuN3/SNC structure exhibit synergistic effects, modulating the adsorption of intermediates, lowering the energy barrier of key reaction steps, and enhancing the selectivity and yield of ammonia. This asymmetric bimetallic atomic catalyst facilitates deeper exploration of the precise synthesis and property modulation of atomic-scale materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RENEWABLE ENERGY
·
2025
·
IF 9.1
Liqiang Zhang,Ningmin Zhu,Yuxiang Liu,Honglei Shi,Yiya Wang,Ruiqi Liu,Riyi Lin
A two-stage co-pyrolysis approach was developed for the efficient utilization of marine waste plastics and biomass, with a focus on the influence of biomass components. HZSM-5 was modified with Cu via wet impregnation and applied in the catalytic co-pyrolysis of Enteromorpha and polypropylene under varying catalyst-to-feedstock ratios. The Cu/HZSM-5 catalyst was characterized using X-ray diffraction (XRD), N 2 adsorption, and scanning electron microscopy (SEM). The results showed that Cu modification preserved the HZSM-5 framework while increasing pore size, enhancing catalytic cracking efficiency. Thermogravimetric and kinetic analyses revealed that Cu/HZSM-5 lowered the pyrolysis temperature, reduced residues, improved synergy, and decreased activation energy without altering the reaction mechanism. The catalyst significantly reduced oxygenated compounds and enhanced the formation of aromatic hydrocarbons in the oil products, reaching a maximum aromatic content of 90.20 % at a 6:5 catalyst-to-feedstock ratio in the second stage. Under the same conditions, hydrogen production in the gas phase also peaked at 47.91 %. Increased catalyst dosage decreased carbon and hydrogen content in the char while raising oxygen and nitrogen levels, with a higher H/C ratio mitigating char aromatization and densification. A reaction mechanism for Enteromorpha and polypropylene over Cu/HZSM-5 was proposed. This study provides insights into the catalytic co-pyrolysis of marine waste plastics and biomass with complex compositions.
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Hongyu Wang,Tao Wang,Gonghao Li,Bo Wu,Ruijun Gao
Balancing increased recoverable strain with high phase transformation temperature is crucial for Cu-Al-Mn SMAs to cost-effectively overcome the service temperature limitation (<100°C) of NiTi-based SMAs. This study fabricated four types of Cu-12.5Al-3Mn SMAs modified with nano-Al₂O₃ p (0, 0.5, 1.0, and 1.5 wt%) using wire arc additive manufacturing (WAAM) with cored wires. It investigated the effects of nano-Al₂O₃ p on shape memory properties, exploring mechanisms via microstructural, phase, and hardness analysis. Results show that adding an appropriate amount of nano-Al₂O₃ p significantly enhances memory performance while maintaining high martensite transformation temperatures. The 0.5 wt% nano-Al₂O₃ p modified alloy exhibited optimal properties: a shape recovery rate of 87.77 % (13.8 % higher than the base alloy) and a recoverable strain of 7.02 % (>40 % higher than the commonly reported 5 %) under 8 % bending pre-strain. Its Ms temperature remained above 100°C (As, Af, Mf were largely unchanged), and full recovery time was halved compared to the unmodified alloy. The enhancement is attributed to nano-Al₂O₃ p strengthening the parent phase and improving thermoelastic martensite order via pinning. Their high stability under WAAM's high-energy heat source minimizes impact on alloy composition, while dispersed particles create lattice distortion and stress fields, reducing the energy barrier for martensitic transformation.
✓ 已验证
产品关联
DOI
高影响因子
Materials Horizons
·
2025
·
IF 10.7
Chen Peng,Jiaxin Li,Nan Wang,Xinyue Zhang,Wen Zhang,Zhirui Li,Keyi Zhang,Yangchaowei Ji,Wei He,Yan Li
We develop pyruvate with good biocompatibility and mitochondria-targeting ability as a copper ionophore (pyruvate-Cu). To further overcome its drawbacks, traceable nanoparticles are constructed to deliver pyruvate-Cu for triple negative breast cancer (TNBC) treatment. In vitro and in vivo results demonstrate that this work provides an efficient platform for enhanced TNBC therapy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2025
·
IF 8.3
Liandong Li,Ziqi Qiao,Bing Lin,Hailong Zhang,Yingying Wang,Zhe Sun,Yiping Hu,Denghao Ouyang,Shiyu Li,Hangzhou Wang,Junlei Tang,Caineng Zou
Electrolysis of neutral saline wastewater/seawater enables sustainable hydrogen production but faces sluggish hydrogen evolution reaction (HER) kinetics and poor durability in chloride-rich media. Herein, a novel Cu 2 S/Amorphous/Cu–Ni–Mo heterostructure electrocatalyst, prepared by electrodeposition and atomic layer deposition (ALD), was introduced to address these challenges. The electrode was synthesized by electrodepositing a Cu–Ni–Mo coating onto a stainless steel substrate, followed by in-situ sulfurization using ALD technology to form an amorphous layer, yielding a heterostructure with optimized interfacial properties. This heterostructure electrode exhibited an overpotential of 63.29 mV at −10 mA cm −2 and maintained stable operation at −100 mA cm −2 for over 180 h in 0.5 mol/L NaCl +1 mol/L phosphate buffered saline (PBS). A 10 cm × 10 cm electrode was successfully fabricated using this scalable method, which exhibited uniform morphology and stability exceeding 240 h. This work advances HER performance and scalability in neutral environments, facilitating industrial-scale electrocatalytic hydrogen production.
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2025
·
IF 7.3
Feiyang Cheng,Xiangfeng Zhu,Fucheng Yun,Mengting Wei,Chen Shi,Jian Han
As one of the most widely utilized polymer coating systems, polyvinyl chloride (PVC) is extensively applied in industrial protection fields due to its excellent processability and cost efficiency. To meet rising performance demands in extreme environments, developing PVC coatings with efficient flame retardancy and smoke suppression has become a key research focus. This study developed an innovative BiOCl@Cu-MOF hybrid through an in situ growth strategy. Incorporating the additive at 15 phr increased the limiting oxygen index (LOI) from 23.4 % to 29.4 %. The PVC coating also passed the UL-94 rating test, reaching the highest V-0 level. Cone calorimetry analysis showed a 55.9 % reduction in peak heat release rate, indicating superior flame retardant behavior. In terms of smoke suppression, the coating achieved a 66.7 % decrease in peak smoke production rate. More importantly, the peak carbon monoxide production, a critical lethal factor in fires, was suppressed by 46.9 %. The PVC coating further exhibited 99.9 % antibacterial efficacy against both Staphylococcus aureus and Escherichia coli . This work establishes a pioneering design paradigm for multifunctional protective coatings, offering significant potential in fire-safe building materials, electronics encapsulation, and bio-secure applications.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Li Liu,Yuefeng Huang,Zhenqiang Kan,Yaohong Yang,Peng Wang,Yuju Chen,Dongyu Wei,Hong Lei,Guanben Du,Lianpeng Zhang
The application of biopolymers in adhesive design holds immense potential for advancing the sustainable manufacturing of high-performance materials. In this study, chitosan (CS), a renewable and biodegradable biopolymer, serves as the structural backbone for developing an innovative organic-inorganic hybrid resin Cu/ZIF-8@CS-MCS@BN. Initially, CS was chemically functionalized via crosslinking with maleic anhydride (MA) to form a maleated chitosan network (CS-MCS), exploiting the biopolymer's abundant amino and hydroxyl groups for covalent bonding. This chitosan-based network was subsequently reinforced with boron nitride nanosheets (BN) and copper-doped ZIF-8 metal-organic frameworks (Cu/ZIF-8), synergistically combining the flame-retardant and mechanical-enhancing properties of inorganic fillers with the organic network of the chitosan matrix. The Cu/ZIF-8@CS-MCS@BN resin was processed into two distinct wood composites: (1) plywood fabricated by hot-pressing poplar veneers with the resin exhibited exceptional interfacial adhesion, achieving a boiling-water-resistant shear strength of 1.01 MPa, which surpasses the requirements of the Chinese national standard GB/T 9846–2015; (2) lightweight aerogels prepared by freeze-drying resin-wood flour mixtures demonstrated outstanding compressive resistance (compressive modulus: 45.23 MPa) and fire safety (limiting oxygen index (LOI) = 42.8 %, UL-94 V-0 rating). This work establishes a green paradigm for fabricating multifunctional wood composites, highlighting the pivotal role of biopolymer engineering in next-generation construction materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子