Nature Aging
·
2026
·
IF 25
Wu Meng,Zhu Qingqing,Xiong Jiaqiang,Tang Weicheng,Chen Dan,Xue Liru,Feng Yourong,Dai Yun,Wu Tong,Wu Chuqing,Guo Yican,Wei Simin,Huang Yibao,Zheng Peizhe,Li Yuting,Song Yiqing,Ding Ting,Wu Mingfu,Li Zifu,Rong Yueguang,Wang Wenwen,Li Yan,Dai Jun,Wang Shixuan,Zhang Jinjin
Recent studies have highlighted the crucial role of mechanical properties in the ovarian microenvironment for ovarian function. However, the mechanisms that cause ovarian matrix stiffening during aging remain incompletely understood. Here we utilized atomic force microscopy (AFM) to demonstrate that human ovarian matrix stiffness increases with aging and in pathophysiological conditions, such as chemotherapy-induced premature ovarian insufficiency (POI), polycystic ovary syndrome (PCOS) and ovarian endometriosis. By integrating proteomic analysis of human ovarian tissue with transcriptomic profiling of human ovarian fibroblasts, we identified that IL-11, which is elevated in aging ovaries of mice, rats and humans, activates fibroblasts to secrete extracellular matrix (ECM), thereby increasing ovarian matrix stiffness. Genetic deletion of Il11ra1 in mice mitigated the increase in ovarian matrix stiffness and the decline in ovarian function associated with aging, chemotherapy-induced POI and PCOS. Single-nuclei RNA sequencing (snRNA-seq) revealed that blocking Il11r a 1 reduces the proportion of activated fibroblasts. Furthermore, administration of si Il11 nanoparticles to aged mice and rats enhanced fertility and reduced ovarian matrix stiffness. Together, these findings highlight the pro-inflammatory factor IL-11 in regulating ovarian matrix stiffness. We propose that anti-IL-11 therapy represents a promising translational strategy for delaying ovarian aging.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Chemistry
·
2026
·
IF 24.5
Wang Nan,Cui Chunyu,Xu Runjing,Wang Xiaofang,Wu Chaoxin,Pu Qihao,Wang Wentao,Cao Yongjie,Liao Mochou,Wang Fengmei,Wang Yonggang,Chen Yuhui,Ji Xiao,Xia Yongyao,Wang Fei
Magnesium–oxygen (Mg–O 2 ) batteries are considered promising candidates for next-generation energy storage systems due to their high specific energy, low cost and intrinsic safety. However, poor rechargeability remains a critical barrier, largely due to the lack of suitable electrolytes and undesired irreversible cathode reactions. Here we report a rechargeable non-aqueous Mg–O 2 battery enabled by a tailored electrolyte featuring a cage-like Mg 2+ solvation environment. We find that varying ether solvent chain lengths, alongside a tridentate chelating agent, can act coordinately to form a dynamic solvation microreactor. This solvation environment is consistent with the reversible formation of nanocrystalline magnesium peroxide at the cathode and remains compatible with reversible magnesium plating/stripping. The resulting Mg–O 2 batteries achieve a high initial discharge voltage approaching 2.0 V, an ultralow overpotential of 0.35 V, a remarkable round-trip energy efficiency of 80% and over 450 stable cycles. These results highlight a solvation-structure-guided strategy for enabling rechargeable Mg–O 2 batteries and potentially other multivalent metal–air systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Thermal Science
·
2026
·Vol. 35
·期 4
·1342-1354
·
IF 3.2
Hao Yunze,Gong Yutong,Liu Feng,Lv Yanlong,Wang Yuhao,Li Jinping
In response to increasing energy demands, absorption heat transformers (AHTs) have been widely employed as efficient energy conversion devices across various fields. However, existing working pairs (e.g., LiBr/H 2 O and NH 3 /H 2 O) exhibit high corrosiveness and limited thermal stability, significantly restricting their applicability in high-temperature environments. Therefore, the development of high-performance working pairs is crucial for improving the efficiency and stability of AHT systems. In this study, four groups of ionic liquid-based ternary matrix pairs: LiBr-[EMIM]Cl/H 2 O (1:2), LiBr-[EMIM]Cl/H 2 O (1:3), LiBr-[EMIM][DEP]/H 2 O (1:3), and LiBr-[EMIM][DMP]/H 2 O (1:3), were systematically evaluated through short-term corrosion experiments. The effects of corrosiveness, thermal stability, density, viscosity, and specific heat capacity were analyzed. Experimental results and data analysis clarified the high-temperature properties of ionic liquids, while thermogravimetric analysis and viscosity measurements were conducted to evaluate the relative merits of different working pairs. Results indicate that the LiBr-[EMIM]Cl/H 2 O (1:2) system exhibits the lowest corrosiveness and good thermal stability, making it suitable for corrosion-sensitive AHT systems, while the LiBr-[EMIM][DMP]/H 2 O (1:3) system demonstrates optimal thermal stability at high temperatures, rendering it a complementary solution for high-temperature applications. This study establishes an experimental basis for optimizing AHT working pairs and provides essential data to inform their selection in AHT systems.
✓ 已验证
DOI
高影响因子
Scientific Reports
·
2026
·
IF 4.9
Zhang Guangteng,Chen Yadong,Wang Meichen,Ge Da,Du Qiang,Ke Li,Gong Tianxing,Qi Feng,Bao Juncheng
Hydrogels are widely used in tissue engineering and scaffold fabrication due to their excellent biocompatibility, while 3D printing excels at creating complex architectures. Among various techniques, low-temperature extrusion-based 3D printing has shown promise for hydrogel scaffold fabrication, as rapid solidification under controlled cooling can improve shape retention during deposition. However, commercial low-temperature DIW systems are often expensive, closed-source, and difficult to customize. Moreover, most require a two-step post-processing workflow involving external freeze-thaw cycles, which can damage structures through mechanical disturbance and temperature gradients, increasing contamination risk. To address these issues, we developed a low-cost, open-source low-temperature 3D printing platform by modifying a commercial FDM printer with custom hardware and upgraded software. It maintains stable − 30 °C ± 1 °C and supports in-situ freezing and freeze-thaw processing. Using a Poly(vinyl alcohol)-lignosulfonate sodium-TEMPO-oxidized cellulose nanofibrils (PVA-LS-TOCNF) hydrogel as the model ink, we achieved stable printing of various patterns and mechanical test specimens, with tensile properties comparable to those from ex-situ freeze-thaw methods. Overall, this platform significantly lowers barriers to low-temperature hydrogel 3D printing and improves accessibility.
✓ 已验证
DOI
PubMed
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 4.6
Long Yu-Si,Lu Mei-Yi,Qi Jia-Wei,Chen Geng,Sun Yu,He Xiu-Xia,Zhang Tian-Hui,Cui Li-Guo,Hu Jun-Li,Liu Yi-Chun
Silk fibroin hydrogels frequently exhibit insufficient mechanical strength for biomedical applications. Conventional enhancement strategies often rely on toxic crosslinkers or nondegradable components, thereby compromising biocompatibility and biodegradability. Recently emerged organic solvent-based methods represent an advance, but their associated environmental toxicity remains a concern. In this work, we present a novel thermal oscillation strategy for fabricating high-strength silk fibroin hydrogels exclusively from all-aqueous silk fibroin solutions, eliminating the need for toxic chemicals or non-degradable materials. The resulting hydrogels exhibit outstanding mechanical properties, tensile strength of 2.6 MPa, elongation rate of 152.6%, and toughness of 3.0 MJ/m 3 , which not only surpass the organic solvent-derived silk fibroin hydrogels but also rival the dual-crosslinked, double-networked or composite systems. The silk fibroin hydrogels also exhibit a minimal swelling ratio, outstanding long-term integrity, and excellent biocompatibility. The robust, biocompatible, and biodegradable silk fibroin hydrogels are promising for biomedical applications such as load-bearing tissue scaffolds, long-term implantable drug delivery systems, and durable wound dressings.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Tang Linbin,Lu Zechun,Gao Zongyan,Lou Xuechun,Li Junjian,Wen Yujie,Chen Junchao,Zhu Zhexuan,Luo Shijing,Zhou Lina,Wei Guangfeng,Chen Zuofeng,Zhao Hongying,Li Tong,Peng Luming,Li Fengting,Liu Tao
Achieving a reversible four-electron-per-oxygen-molecule oxygen evolution reaction is an essential yet highly challenging task for nonaqueous lithium hydroxide-based Li | |O 2 batteries, as the kinetically sluggish oxygen evolution reaction tends to entangle with competing parasitic reactions, whose origins and mitigating strategies remain largely elusive. Here we construct a highly reversible lithium hydroxide-based Li | |O 2 battery using iron–cobalt–nickel layered double hydroxide catalysts and tetramethylene sulfone-based electrolytes. Lithium hydroxide decomposition toward oxygen evolution involves key reactive oxygen species of surface-bound hydroxyl and hydroxyl radicals, but no singlet oxygen. These hydroxyl species corrode the electrolyte and carbon support, predominantly accounting for charging irreversibility. While oxidation-resistant solvents and electrical conductors are necessary to reduce hydroxyl-induced side reactions, the synergistic interplay of interfacial water solvation and catalytic surface structures hold the key to steering hydroxyl activity toward the desirable oxygen evolution reaction or by-product formation. This work offers insights into achieving long-life lithium hydroxide-based Li | |O 2 batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Wang Guojuan,Xiong Wei,Qiu Linrong,Hong Chengwu,Liu Ye,He Yutong,Li Shuxing,Xie Rong-Jun
Laser-driven light sources are critically important for lighting, display, and communication systems. However, the traditional phosphor ceramics used in these light sources suffer from low light conversion efficiency, low color rendering index and narrowly tunable color temperature. Here we present a approach of rapid pulsed high-temperature sintering technology to fabricate phosphor ceramics with both dense and grain refined microstructure simultaneously. It results in a 31% improvement in light conversion efficiency, markedly better color mixing uniformity, and 1.5-fold increased fracture toughness for Lu 3 Al 5 O 12 :Ce ceramics. Moreover, this method enables the Lu 3 Al 5 O 12 :Ce–CaAlSiN 3 :Eu composite ceramics with a 95-fold enhancement in quantum efficiency, showing white light under blue laser excitation with a color rendering index of 93 and good reliability. An accurate emission wavelength prediction model was also established with an interval below 5 nm from 495 to 605 nm, and achieved a broad color temperature range (1996-9803 K). This research enhances the development of high-performance light sources toward lighting and indoor/underwater visible light communication.
✓ 已验证
DOI
PubMed
高影响因子
npj Science of Food
·
2026
·
IF 9.7
Zhang Huifen,Pu Jing,Wang Miao,Du Ying,Tang Xiaofu,Niu Jie,Wang Hongxia,Luo Xian,Wang Yongqing,Deng Qunxian
Loquat is highly susceptible to postharvest deterioration, including browning and lignification, which limits its storage life. This study investigated the effects of combined L-cysteine (L-Cys) and γ-aminobutyric acid (GABA) treatment on postharvest quality maintenance of loquat fruit and elucidated the underlying molecular mechanisms through integrated transcriptomic and metabolomic analyses. Physiological assessments revealed that the combined treatment significantly delayed fruit softening, reduced weight loss and browning, suppressed decay incidence, and maintained higher levels of soluble solids, titratable acidity, and total phenolics. Integrated multi-omics analysis demonstrated that L-Cys+GABA treatment primarily modulated the phenylpropanoid metabolic pathway, leading to suppressed lignin biosynthesis through coordinated downregulation of key biosynthetic genes ( COMT , CCR , LAC ) and reduced accumulation of corresponding metabolites. These findings reveal that L-Cys+GABA combined treatment delays postharvest senescence in loquat fruit by targeting the phenylpropanoid pathway to inhibit lignification, providing a physiological and molecular basis for its application as an effective preservation strategy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Zhao Jingwen,Yang Wujie,Fan Yanpeng,Chang Zhi,Zhou Haoshen
Hard carbon negative electrodes, owing to their abundant precursors and low operating potential, are promising candidates for sodium-ion batteries. However, sluggish desolvation kinetics and unstable electrode–electrolyte interfaces hinder their practical deployment. Here we report a melt-coating strategy to encapsulate hard carbon particles with a metal–organic framework glass. The resulting glass coating contains sub-nanometer channels that lower the desolvation activation energy, accelerate sodium-ion transport, and induce a thin, anion-derived solid electrolyte interphase rich in NaF during cycling. The optimized interface promotes the formation of quasi-metallic sodium clusters within the closed pores of hard carbon, activating a high-capacity sodium storage mechanism. Consequently, the glass-coated hard carbon delivers a reversible capacity of 462.2 mAh g −1 , cycling stability of 89.1% capacity retention after 4000 cycles at 1 A g −1 and 95.3% capacity retention after 8000 cycles at 2 A g −1 , and high-rate capability. This work offers insights into interfacial design strategies for durable sodium-ion storage in hard carbon negative electrodes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Sustainability
·
2026
·
IF 32.1
Zhao Chang-Xin,Li Zheng,Zhang Daoning,Zhang Nan,Zhang Qiu,Wang Zeyi,Li Yue,Chen Yawei,Wang Chunsheng
Fast charging and low-temperature operation are essential for next-generation energy storage. However, high-energy batteries struggle to meet these demands as existing electrolytes cannot simultaneously deliver fast interfacial kinetics, high ionic conductivity and favourable interphase formation. Prevailing strategies focus on weakening thermodynamic solvation, yet this approach does not directly address the kinetic bottleneck, that is, the desolvation barrier governing interfacial charge transfer. Here we reveal that the desolvation kinetics are dictated by dynamic solvent exchange rather than thermodynamic solvation energy. Guided by this mechanistic insight, we have formulated an electrolyte in which two anions carry distinct anionic potentials: high-anionic-potential anions form contact ion pairs that accelerate solvation-exchange kinetics, while low-anionic-potential anions form solvent-separated ion pairs that sustain high bulk ionic conductivity. The electrolyte enables fast charging and low-temperature operation in high-loading lithium-ion batteries. The design principle was further validated in aqueous aluminium-ion electrochemical systems, underscoring its broader relevance to sustainable, resource-abundant battery chemistries beyond the lithium ion. Together, our findings establish a new electrolyte design paradigm that decouples interfacial and bulk transport properties and expands the design space of battery electrolyte systems.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
·
2026
·
IF 2.6
Gao Xue,Zhao Feng,Du Zhonghua,Xu Qican
Ceramic/metal composite armor faces limitations in lightweighting, environmental adaptability, and multi-impact resistance. This study proposes a bio-inspired gradient-structured modified polyurethane (PU)/ceramic composite armor. The PU matrix, modified via dynamic covalent disulfide (S-S) bonds, exhibits excellent self-healing (> 95% recovery) and toughness (> 300% elongation). A double-sided PU/ceramic sandwich structure was developed to leverage synergistic energy dissipation through ceramic fragmentation and polymeric tensile delay. Ballistic impact tests and explicit dynamic simulations (deviation < 2%) were performed. Results show the double-sided design achieved a specific energy absorption (SEA) of 20.02 J·m 2 /kg and a ballistic limit (V 50 ) of 493.10 m/s at an areal density of 45.35 kg/m 2 , yielding an 11-18% improvement over conventional systems. Furthermore, the composite maintained structural integrity after 3000-h salt spray and − 50 °C impact evaluations. Energy dissipation analysis quantified that the ceramic layer accounts for 70% of energy absorption via fragmentation, while the PU layer contributes 30% through fibrillation-induced stretching. This research provides a material–structure integration strategy for next-generation intelligent, lightweight, and durable protective systems.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 4.6
Chen Qiang,Cheng Yi-Yan,Sun Yu-Pei,Chen Sen-Bin,Zhang Lian-Bin,Zhu Jin-Tao
Polymer microneedles (MNs) have emerged as promising next-generation transdermal drug delivery platforms owing to their noninvasive nature and high delivery efficiency. Conventional fabrication strategies for polymer MNs mainly rely on mold-assisted vacuum casting or hot pressing. However, these approaches often fail to simultaneously achieve rapid fabrication and mild processing conditions, which are particularly critical for the fabrication of temperature-sensitive drug-loaded MNs. Herein, we report a vacuum-assisted pressing strategy for MN fabrication based on O -carboxymethyl chitosan (CMCA) and natural polyphenol protocatechuic acid (PCA) supramolecular composite slurries. This method enables MN production under significantly reduced processing times (<12 h) and mild thermal conditions (50 °C). Viscoelastic supramolecular composite slurries can be obtained by precisely tuning the polymer-to-polyphenol ratio, which is highly compatible with vacuum-assisted pressing in MNs molding. The resulting polymer-polyphenol supramolecular composites exhibit robust mechanical properties, with a fracture stress of 0.5 MPa and a toughness of 1.31 MJ·m −3 . Notably, supramolecular MNs demonstrated a high fracture force of up to 1.08 N per needle, indicating sufficient mechanical integrity for transdermal insertion. This fabrication strategy offers a viable route for low-cost, scalable, and mild MN fabrication, highlighting its strong potential for practical and commercial applications.
✓ 已验证
产品关联
DOI
高影响因子