RESPIRATORY RESEARCH
·
2022
·Vol. 23
·期 1
·1-16
·
IF 7.162
Liu Haitao,Zhang Sha,Liu Yi,Ma Jing,Chen Wei,Yin Tao,Li Tongbin,Liang Bin,Tao Ling
Background Pulmonary hypertension (PH) is a progressive and fatal cardiopulmonary disease characterized by pulmonary vascular remodeling and increased pulmonary vascular resistance and artery pressure. Vascular remodeling is associated with the excessive cell proliferation and migration of pulmonary artery smooth muscle cells (PASMCs). In this paper, the effects of heat shock protein-110 (HSP110) on PH were investigated.Methods The C57BL/6 mice and human PASMCs (HPASMCs) were respectively exposed to hypoxia to establish and simulate PH model in vivo and cell experiment in vitro. To HSP110 knockdown, the hypoxia mice and HPASMCs were infected with adeno-associated virus or adenovirus carring the shRNAs (short hairpin RNAs) for HSP110 (shHSP110). For HSP110 and yes-associated protein (YAP) overexpression, HPASMCs were infected with adenovirus vector carring the cDNA of HSP110 or YAP. The effects of HSP110 on PH development in mice and cell proliferation, migration and autophagy of PASMCs under hypoxia were assessed. Moreover, the regulatory mechanisms among HSP110, YAP and TEA domain transcription factor 4 (TEAD4) were investigated.Results We demonstrated that expression of HSP110 was significantly increased in the pulmonary arteries of mice and HPASMCs under hypoxia. Moreover, knockdown of HSP110 alleviated hypoxia-induced right ventricle systolic pressure, vascular wall thickening, right ventricular hypertrophy, autophagy and proliferation of PASMCs in mice. In addition, knockdown of HSP110 inhibited the increases of proliferation, migration and autophagy of HPASMCs that induced by hypoxia in vitro. Mechanistically, HSP110 knockdown inhibited YAP and transcriptional co-activator with PDZ-binding motif (TAZ) activity and TEAD4 nuclear expression under hypoxia. However, overexpression of HSP110 exhibited the opposite results in HPASMCs. Additionally, overexpression of YAP partially restored the effects of shHSP110 on HPASMCs. The interaction of HSP110 and YAP was verified. Moreover, TEAD4 could promote the transcriptional activity of HSP110 by binding to the HSP110 promoter under hypoxia.Conclusion sOur findings suggest that HSP110 might contribute to the development of PH by regulating the proliferation, migration and autophagy of PASMCs through YAP/TAZ-TEAD4 pathway, which may help to understand deeper the pathogenic mechanism in PH development.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CELLULOSE
·
2023
·Vol. 30
·期 4
·2441-2452
·
IF 5.7
Yi Caifu,Yuan Tianzhong,Ren Hao,Xiao Huining,Zhai Huamin
With the popularity of air fryer, there is an increasing demand for air frying paper. Here, we successfully prepared an air frying paper with good barrier capacity, cytocompatibility and degradability by coating chitosan, zein and lignin containing cellulose nanofibers (LCNFs), in sequence. The obtained triple-coated paper has a high kit number of 12 and a low Cobb 60 value of 4.93 g/m 2 . Importantly, it had excellent hot oil resistance, which was no penetration even at oil temperature of 210 °C. The triple-coated paper also showed good resistance to ethanol, acid and alkali solutions. These excellent barrier capacities were due to the smooth and dense barrier layer formed by chitosan, zein and LCNFs. Thus, the triple-coated paper was successfully used in the air fryer to fry fries and chicken drumsticks. And the good cytocompatibility and degradability of the coated paper further promote its practical application.
✓ 已验证
产品关联
DOI
高影响因子
Science China-Chemistry
·
2023
·
IF 9.6
Yang Hui,Ji Haijun,Zhou Xinxin,Yang Shihan,Li Liwei,Sun Chaoying,Lei Weiwei,Wang Runguo,Zhang Liqun
Poly(diethyl fumarate- co -methoxyethyl acrylate- co -vinyl chloroacetate) (PDEFMV), a novel bio-based elastomer with a saturated structure, was synthesized via redox emulsion polymerization. The glass-transition temperatures of PDEFMV, adjusted through the variation of the diethyl fumarate-to-methoxyethyl acrylate feeding ratio, ranged from −36.1 to −14.8 °C. The number-average molecular weights of PDEFMV ranged from 384,000 to 46,000 g/mol. In designing the molecular structure, vinyl chloroacetate was used to provide active sites for subsequent vulcanization and crosslinking. The active chlorine groups within the PDEFMV chain reacted with the crosslinking agent trithiocyanuric acid under high temperature and pressure to form a nonsulfur crosslinked three-dimensional network structure. To achieve the desired properties, carbon black (CB, N330) was incorporated to reinforce PDEFMV, leading to the formation of PDEFMV/CB composites. A comprehensive study was conducted on the high-temperature oil resistance of PDEFMV/CB composites. Following immersion in IRM903 oil at temperatures of 150 and 200 °C for 72 h, the mass and volume changes in PDEFMV/CB were lower than those observed in commercially available acrylate rubber (AR)/CB, indicating that PDEFMV exhibited superior oil resistance. Furthermore, the aging characteristics and mechanisms of oil resistance in the PDEFMV/CB and AR/CB composites were investigated at different temperatures (150, 200, and 250 °C). The results provide insights into the operational temperature ranges suitable for PDEFMV/CB and offer valuable guidance for potential industrial applications.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2019
·Vol. 55
·期 5
·2006-2017
·
IF 3.442
Zhao Yiming,Guo Yingchun,Wang Xiaomei,Zhang Xu
To construct secondary processes of multiscale architecturing, wrinkly silica microspheres (WSMs) are nested into the empty chamber of templated macroporous structure by using core–shell microspheres to self-assemble the colloidal crystal template and selectively removing the shells. It is a universal approach to form the binary inverse opal (IO) structures and maintain interconnected nanochannels. With gold nanoparticles loaded on the WSMs (denoted Au-WSMs@IO SiO 2 ) in the meantime, it has been demonstrated by the reduction of 4-nitrophenol (4-NP) that the binary IO materials (Au-WSMs@IO SiO 2 ) exhibited higher catalytic efficiency than simple nested microspheres (Au-WSMs) after recycling 15 times. Furthermore, it was nice to see it had excellent catalytic effect in the epoxidation of styrene. Owing to the outstanding catalytic activity, recyclability and mechanical stability of the binary IO materials, it will be a promising way to widely apply in heterogeneous catalysis.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2023
·Vol. 14
·期 1
·1-14
·
IF 16.6
Wu Xin-Hua,He Yang-Yang,Chen Zhang-Rong,He Ze-Yuan,Yan Yi,He Yangzhige,Wang Guang-Ming,Dong Yu,Yang Ying,Sun Yi-Min,Ren Yong-Hong,Zhao Qiu-Yan,Yang Xiao-Dan,Wang Li-Ying,Fu Cai-Jun,He Miao,Zhang Si-Jin,Fu Ji-Fen,Liu Hong,Jing Zhi-Cheng
Immune and inflammatory responses have an important function in the pathophysiology of pulmonary hypertension (PH). However, little is known about the immune landscape in peripheral circulation in patients with high-altitude pulmonary hypertension (HAPH). We apply single-cell transcriptomics to characterize the monocytes that are significantly enriched in the peripheral blood mononuclear cells (PBMC) of HAPH patients. We discover an increase in C1 (non-classical) and C2 (intermediate) monocytes in PBMCs and a decrease in hypoxia-inducible transcription factor-1α (HIF-1α) in all monocyte subsets associated with HAPH. In addition, we demonstrate that similar immune adaptations may exist in HAPH and PH. Overall, we characterize an immune cell atlas of the peripheral blood in HAPH patients. Our data provide evidence that specific monocyte subsets and HIF-1α downregulation might be implicated in the pathogenesis of HAPH.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Protocols
·
2023
·
IF 14.8
Liu Yongchun,Miao Shuting,Ren Hao,Tian Lihua,Zhao Jian,Yang Peng
Two-dimensional (2D) protein films can be used to modify the properties of surfaces, and find applications predominantly in the fields of biomaterials, lithography, optics and electronics. However, it is difficult to produce scalable homogeneous and robust protein films with an easy, low-cost, green and efficient method. Further challenges include encapsulating and releasing functional building blocks in the film without inactivating them, and maintaining or improving the bioactivities of proteins used for the formation of the films. Here we detail the process to prepare large 2D protein films with user-defined features and structures via the amyloid-like aggregation of commonly synthesized proteins. These films can be synthesized at meter scales, have high interface adhesion, high functional expansibility and tunable functional properties, obtained by controlling the position of the disulfide bond breakage. For example, we can retain or even enhance the natural antibacterial, biomineralization and antifouling activity of proteins involved in film formation, and the properties can also be expanded through the physical blending or chemical grafting of additional functional blocks on the surface of the film. A 2D protein film can be prepared in ~3 h using four alternative coating techniques: immersion, transfer, hydrogel stamping and spraying. The characterization process of the film requires ~5 d. The procedure can be carried out by users with basic expertise in materials science.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2026
·
IF 3.3
Wang Xinyuan,Liu Yue,Peng Decheng,Wu Shaogui
The extensive use of antibiotics has promoted their migration into groundwater and, ultimately, the food chain, posing risks to human health and aquatic environments. Addressing this problem requires not only quantitative detection but also efficient removal of antibiotics from contaminated water. Here, Pyracantha fortuneana fruit and 5-amino-o-cresol (5-AoC) were used as precursors to prepare green fluorescent carbon dots (G-CDs) by a solvothermal method, with a fluorescence quantum yield of 17.3%. The G-CDs exhibited stable fluorescence under a range of environmental conditions. A CDs/TiO 2 composite photocatalyst was then constructed by coupling the G-CDs with TiO 2 . Under optimized conditions (20 mg catalyst, pH 9, 1.0 mmol/L PMS and ultraviolet irradiation), the catalyst removed 95.8% of tetracycline (TC) within 30 min. This strategy provides a simple and rapid route for TC removal from water under controlled laboratory conditions. Fluorescent carbon dots derived from P. fortuneana fruit therefore show promise for model-pollutant treatment. Because this study focused on material synthesis and performance validation, degradation performance in real water matrices and long-term operational stability should be examined in future work.
✓ 已验证
DOI
高影响因子
Science China-Earth Sciences
·
2026
·Vol. 69
·期 10
·3835-3849
·
IF 5.5
Liu Haoyang,Li Wei,Zhu Jihao,Lu Jianggu,Wu Tao
Mineral carbonation, which transforms CO 2 into stable carbonates via reaction with Ca- and Mg-silicates, offers a permanent and secure carbon sequestration pathway. Olivine is a highly reactive feedstock, and its carbonation kinetics are known to depend on particle size, CO 2 partial pressure ( \({P_{{\rm CO}_2}}\) ), temperature, and additives. However, two key gaps persist in the current understanding. First, the time-dependent influence of \({P_{{\rm CO}_2}}\) throughout the carbonation process remains unclear. Furthermore, the effect of the grinding method (wet vs. dry) is frequently oversimplified as reducing particle size, neglecting its concurrent alteration of other physicochemical properties. This study systematically addresses these gaps by investigating the carbonation of fine-grained olivine under varied \({P_{{\rm CO}_2}}\) (5–14 MPa) at 185 °C. Reaction progress was tracked in real time using a flush-sampling batch reactor. Our results reveal that the wet-ground olivine, possessing a higher specific surface area (SSA), achieved significantly greater carbonation efficiency compared to the dry-ground sample. Kinetic analysis based on the shrinking core model (SCM) indicates that the formed porous carbonate layer does not act as a diffusion barrier but facilitates the reaction. Increasing \({P_{{\rm CO}_2}}\) significantly enhanced the carbonation rate and final efficiency, with the maximum conversion reaching 98.45% at 14 MPa after 8 h. Furthermore, we identified that the reaction was most sensitive to \({P_{{\rm CO}_2}}\) during the initial stage, with the most pronounced effect observed within the first hour. The primary mechanistic insight is that initial carbonation is predominantly controlled by \({P_{{\rm CO}_2}}\) -driven dissolution, whereas at later stages, the available reactive surface area becomes the limiting factor. This work demonstrates that optimizing both the grinding method (preferring wet grinding for ex-situ applications) and employing elevated \({P_{{\rm CO}_2}}\) (⩾ 8 MPa for in-situ scenarios) are critical strategies for enhancing the efficiency and practical viability of olivine-based CO 2 sequestration.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOBIOTECHNOLOGY
·
2026
·
IF 15
Lv Nanning,Dong He,Sun Haifu,Shi Jing,Wu Xinhui,Chen Xiaofan,Li Hongye,Feng Xiaoxiao,Guo Xuran,Dong Xieping,Hu Ying,Zheng Longpo,Liu Mingming
Diabetic bone defects are difficult to repair because chronic hyperglycemia disrupts local immunometabolic and vascular homeostasis, leading to persistent inflammation, poor angiogenesis, and impaired osteogenesis. Here we report a piezoelectrically driven hierarchical biomimetic architecture that promotes diabetic bone defect repair through spatially bidirectional regulation of HIF-1α. The system comprises an ultrasound-responsive PLLA/ZnO/DFO biomimetic periosteum and a conductive GelMA/MXene/Ce-MOF@Arg defect-filling hydrogel. Under ultrasound stimulation, the upper layer generates piezoelectric microcurrents and releases deferoxamine, which is associated with activation of endothelial HIF-1α/VEGF signaling and angiogenic responses, whereas the lower layer relays electrical cues into the defect core and is associated with reduced macrophage HIF-1α expression and glycolytic activity in parallel with arginine delivery and Ce-MOF nanozyme-mediated redox regulation. This design promotes recovery toward a more favorable immunometabolic-vascular state by coupling superficial pro-angiogenic activation with deep anti-inflammatory metabolic remodeling. The scaffold shows favorable piezoelectric, conductive, mechanical, degradation, and release properties, promotes endothelial migration, drives macrophage polarization toward a reparative phenotype, enhances osteogenic-angiogenic coupling, and substantially accelerates critical-sized calvarial defect healing in diabetic rats. Our findings provide an electroactive and spatially coordinated strategy for diabetic bone regeneration.
✓ 已验证
产品关联
DOI
高影响因子
Food Analytical Methods
·
2026
·Vol. 19
·期 11
·350
·
IF 3
Li Yunna,Li Xueliang,Chang Yuming,Qi Fan,An Lingxia,Jiang Kezhi
The content of free fatty acids (FAs) is a critical safety indicator for edible oils. However, the current GC–MS analysis of FAs is not satisfactory due to their inefficient derivatization under mild conditions. In this study, we achieved efficient methylation of fatty acids within 10 min by derivatization with trimethylsilyldiazomethane (TMSD) catalyzed trimethyl chlorosilane (TMSC). Then, an efficient methylation of FAs was achieved within 10 min through derivatization with trimethylsilyldiazomethane under the catalysis of trimethylchlorosilane, and a convenient method for the determination of 33 free fatty acids in oil samples has been developed by methylation in combination with extraction with methanol and GC–MS analysis. The method exhibited good reproducibility, sensitivity, and recovery. The determined content range of several free FAs (e.g. palmitoleic acid, α-linolenic acid, linoleic acid, elaidic acid, and arachidic acid) in edible oils was significantly lower than that in expired edible oils (or gutter oil). Furthermore, the content of γ-linolenic acid, which is prone to oxidation, was below the LOQ (0.40 ng/g) in gutter oil, suggesting it as an indicator of severe oxidative degradation. This method was characterized by its ease of operation and good reproducibility, presenting significant potential for oil quality control.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Minerals Metallurgy and Materials
·
2026
·Vol. 33
·期 8
·2541-2552
·
IF 8.8
Wei Xinlei,Sun Yongsheng,Wei Xiaotong,Gao Peng
Malachite, a typical copper oxide ore, exhibits strong hydrophilicity; therefore, it also exhibits poor flotation recovery. In this study, sulfidation roasting was applied as a pretreatment strategy to improve the flotation efficiency of malachite. Pyrite was used as the sulfidation agent during roasting, the feasibility of which was verified using thermodynamic calculations. Microflotation experiments demonstrate that the flotation recovery of malachite increased by nearly 70% compared with that of the untreated sample. X-ray diffraction analysis indicates that the malachite decomposed into CuO during roasting and mainly formed CuS and Cu 2 S after sulfidation. This result was further supported by X-ray photoelectron spectroscopic analysis, which revealed the presence of S (S 2− , S
2− 2
, and S
2− n
) and Cu (Cu + and Cu 2+ ) species in different oxidation states on the surfaces of the roasted sample, as well as a notable decrease in oxygen content. In addition, the formation of copper sulfides disrupted the original porous structure, which led to a decrease in internal pore size. The contact angle increased from 43.71° to 89.29° after sulfidation roasting, indicating that the hydrophobicity of malachite improved markedly. Zeta potential results further indicate that the surface electronegativity increased owing to the adsorption of S species. Overall, sulfidation roasting using pyrite improved the floatability of malachite by generating hydrophobic copper sulfides on the mineral surfaces, thereby demonstrating its potential as an effective pretreatment for copper oxide ores.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 4.6
Cen An-Ning,Zhu Yin-Da,Xu Ke,Wen De-Zhong,Wu Tong-Fei,Cao Nuo,Tian Xue-Lin
Passive anti-icing approaches utilizing icephobic surfaces present innovative solutions that require minimal energy, are simple to maintain, and are environmentally sustainable, garnering considerable interest. However, icephobic surfaces may encounter challenges related to environmental adaptability, which diminishes their durability. To mitigate this issue, we developed soluble polydimethylsiloxane covalent adaptable networks (PDMS CANs) for low-modulus icephobic coatings with intrinsic self-repairing capability. These soluble PDMS CANs were synthesized from diol-terminated PDMS, which underwent dynamic end-cross-linking through dioxaborolane linkages. The end-linked structure enabled dissolution in solvents such as ethyl acetate. Once the solvent was removed, the dynamic cross-linked networks re-formed. This feature made PDMS CANs suitable for processing methods such as solution casting or coating. The cross-linking density of the CANs could be modified by varying the chemical formulation. The effects of cross-linking density on mechanical properties, self-repairing capability, and icephobic performance were examined. To further enhance deicing performance, silicone oil was incorporated into the PDMS CANs as a lubricant. The relationship between icephobic performance and oil content was explored. The optimal ice adhesion strength, achieved at an oil content of 40 wt%, was approximately 7.1 kPa at −0 °C. The coatings demonstrated good durability throughout icing-deicing cycles. This study highlights the potential of self-repairing, low-modulus elastic coatings based on CANs for large-area deicing applications.
✓ 已验证
产品关联
DOI
高影响因子