APPLIED CATALYSIS B-ENVIRONMENTAL
·
2024
·
IF 20.2
Sen-Wang Wang,Zhen-Hong He,Yue Tian,Zhan-Jun Zhu,Yong-Chang Sun,Kuan Wang,Weitao Wang,Yang Yang,Huan Wang,Zhao-Tie Liu
Photothermal CO 2 oxidative dehydrogenation of propane (CO 2 -ODHP) is an environmentally friendly and sustainable route for propylene production and CO 2 utilization. In the present work, we developed a Pt-GaN/SrTiO 3 dual-functional catalyst to facilitate the reaction. The catalyst achieved propylene and CO yields of 1 mmol·g cat -1 ·h -1 and 1.2 mmol·g cat -1 ·h -1 under photothermal conditions at 320 °C, surpassing the performance of previously reported catalysts. Additionally, control experiments and in situ DRIFTS analyses corroborated that GaN and Pt were primarily responsible for the activation of C-H and C O bonds, respectively, and the photothermal route worked via a distinguished intermediate for CO 2 activation in contrast to the thermal route. DFT calculations supported the reaction route involving the coupling direct dehydrogenation of propane and reverse water-gas shift reaction. The present work shines a light on the design of photothermal catalysts with dual functions, particularly for the activation of CO 2 and light hydrocarbons. Additionally, it proposes a strategy to initiate high-temperature reactions at relatively lower temperatures.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Polymer Materials
·
2024
·
IF 4.4
Qingping Xin,Tao Huang,Shuo Li,Ningning Gao,Huimin Jin,Hao Chen,Lei Zhang,Hui Ye,Hong Li,Yuzhong Zhang
The membrane separation approach has garnered considerable interest in the area of CO2 separation due to its advantages of requiring little electricity and a wide range of applications. Here, we report the preparation of pSBMA@Ti3C2Tx nanosheets functionalized with poly(amphiphilic poly(methacryloyloxyethylsulfobetaine) (pSBMA)) by precipitation distillation, weighing of pSBMA@Ti3C2Tx nanosheets with different mass ratios to be added into cross-linked poly(ethylene oxide) (XLPEO), and preparation of a continuous, thin mixed-matrix membrane (MMM). Under gas humidification, the membrane showed the best permeation performance. Due to the richness of hydrophilic organosulfate groups (−SO3–) and quaternary amine groups [−N+(CH3)3] in pSBMA, the overall water content of the MMMs is increased, which greatly improves the CO2 permeability. Enhancing the ratio of bound water augments the membrane’s capacity to segregate CO2/N2. Under coordination of water molecules, quaternary amine groups effectively promote the quick delivery of CO2 in the membrane. In the wet state, the XLPEO/pSBMA@Ti3C2Tx-0.2 membrane has a CO2/N2 selectivity of 27.5 and a CO2 permeability of 4953 barrer, an improvement of 87% and 109%, respectively, compared to those of the XLPEO pure membrane, breaking the 2008 Robeson upper limit and approaching the 2019 upper limit. We also studied the change of the gas separation performance of the membrane under different pressures.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2025
·
IF 16
Kang Hu,Tingsong Hu,Tengyu Yao,Xueliang Cui,Qiuju Li,Laifa Shen
Li–CO2 batteries are considered promising energy storage systems for implementation in space applications. However, unsatisfactory overpotentials and poor cycling stability caused by the sluggish reaction kinetics of CO2 reduction and evolution have greatly limited the practical application of Li–CO2 batteries. Herein, we introduce a redox mediator LiI to stabilize the Bi5O7I photocathode by the successive separation of electrons and holes to accelerate the sluggish kinetics. Under illumination, LiI allows photogenerated holes to preferentially react with I– in the solid–liquid interface, thereby inhibiting the release of I– from Bi5O7I and effectively improving the lifespan of the photocathode. Thus, a high discharging platform of 3.05 V and an ultralow charging platform of 3.09 V are achieved to exhibit an energy efficiency of 98.8%. Moreover, a significantly enhanced reversibility is attained, attributed to the decomposition of Li2CO3, which further extends the cycle life to 250 h. This double-phase catalytic strategy demonstrates effectiveness in the development of high-performance Li–CO2 batteries and other energy storage devices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER BULLETIN
·
2025
·
IF 4
Zhang Chengpeng,Bei Pengzhi,Liu Hongjing,Zhao Xu,Shi Meiling,Jing Xiaochun,Li Zhao,Yao Hui
A novel porous liquid, M2070-UiO-66-OH@[BMim][PF 6 ], has been synthesized using zirconium-based metal–organic framework (UiO-66-OH), 1-butyl-3-methylimidazolium hexafluorophosphate ([BMim][PF 6 ]) and polyetheramine M2070. To enhance the CO 2 separation performance, M2070-UiO-66-OH@[BMim][PF 6 ] was incorporated as a filler into a mixed matrix membrane (MMM) using polyether block amide (Pebax-1657) as the membrane matrix. The properties of the synthesized M2070-UiO-66-OH@[BMim][PF 6 ] and the resulting MMMs have been characterized through FTIR, TGA, DSC, and SEM analyses. The results of porous liquid stability revealed that grafting polyetheramine M2070 onto the surface of UiO-66-OH@[BMim][PF 6 ] significantly increased the steric hindrance, thereby preventing agglomeration within the membrane. Additionally, the functional groups (amino and ether) present in M2070-UiO-66-OH@[BMim][PF 6 ] contributed to an increased number of active sites for CO 2 adsorption, facilitating enhanced CO 2 transport through the membrane. Compared to the Pebax membrane, the MMM containing 3% M2070-UiO-66-OH@[BMim][PF 6 ] exhibited significantly improved CO 2 permeability of 104.07 Barrer (an increase of 73.22%) and CO 2 /N 2 selectivity of 92.37 (an increase of 148.95%) at 30 °C and 0.3 MPa, surpassing the 2008 Robeson upper bound. These findings suggest that M2070-UiO-66-OH@[BMim][PF 6 ] is a highly promising additive for the fabrication of mixed matrix membranes with superior CO 2 separation performance. Graphical abstract A porous liquid, (M2070-UiO-66-OH@[BMim][PF 6 ]) has been prepared using UiO-66-OH@[BMim][PF 6 ] as the core and polyetheramine M2070 as the canopy. Afterwards, M2070-UiO-66-OH@[BMim][PF 6 ] has been added to the Pebax matrix to prepare M2070-UiO-66-OH@[BMim][PF 6 ]/Pebax mixed matrix membranes, which have been subjected to gas separation studies.
✓ 已验证
产品关联
DOI
高影响因子
Sustainable Chemistry and Pharmacy
·
2024
·
IF 5.5
Yuheng Xie,Jiangxin Li,Cong Li,Xin Wang,Juan Zhang
In recent years, research on the conversion of CO 2 into fine chemical products has emerged as a prominent and dynamic area of study. In this study, four ligands were synthesized using salicylaldehyde , o-phenylenediamine, ethylenediamine , hexanediamine, and 2,6-diaminopyridine as precursors. Subsequently, these ligands were reacted with cobalt nitrate, zinc chloride , and aluminum chloride to synthesize 12 Schiff base metal complexes , which were employed as catalysts for the synthesis of propylene carbonate from CO 2 and epichlorohydrin . The findings reveal that the SF-L/Co catalyst demonstrated superior performance, potentially attributed to the robust chelating capability of Co, leading to the provision of more acidic metal centers. Characterization of SF-L/Co was conducted utilizing scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) techniques. Process conditions were optimized, resulting in the achievement of a 100% yield and selectivity of propylene carbonate under optimal reaction conditions, without the generation of any by-products. Furthermore, the catalyst exhibited remarkable reusability, demonstrating consistent catalytic activity over five successive cycles without a substantial decrease in performance.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Yingying Li,Yong Men,Shuang Liu,Jinguo Wang,Kang Wang,Yuhan Tang,Wei An,Xiaoli Pan,Lin Li
Citric acid has been investigated for preparing the highly dispersed nickel catalysts on Y 2 O 3 support. A highly enhanced methanation activity with the high CO 2 conversion of 92 % and CH 4 selectivity of 100 % was obtained over Ni/Y 2 O 3 with optimum addition of citric acid at 350 °C. The citric acid additives during the preparation are found to influence the size of nickel nanoparticles and the interaction of metal and support, as estimated by various techniques, which, in turn, to correlated with the catalytic performance. In situ DRIFTS spectra further indicate the importance of small Ni particles on formation of carbonates and formate species as key intermediates and the subsequent hydrogenation of those species into methane. This study proposes that the Y-O-Ni interfacial structure formed by the strong Ni and Y 2 O 3 interaction at high citric acid addition is of prime importance for the formation of methane, benefiting from the more abundant basic sites and metallic Ni to enable CO 2 activation and hydrogenation of key intermediates by effective H 2 dissociation respectively. This work provides a new design strategy for developing highly efficient composite CO 2 methanation catalysts by control of the metal particle size and charge transfer via metal/support interface.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Qian Chen,Xianjie Chen,Qiaorong Jiang,Zhiping Zheng,Zhijia Song,Zhiying Zhao,Zhaoxiong Xie,Qin Kuang
The internal electric field (IEF) has recently attracted intense attention in photocatalysis due to its extraordinary ability in accelerating charge separation and migration. In this work, it is found that IEF intensity can be effectively enhanced by constructing oxide/sulfide in-plane heterojunction from the pristine two-dimensional (2D) metal sulfides. Taking 2D In 2 S 3 nanosheet as a model, In 2 O 3 /In 2 S 3 in-plane heterojunction has been obtained via O 2 plasma technique, the IEF of which has been dramatically increased by 2.7 times. Benefitting from its enlarged IEF, In 2 O 3 /In 2 S 3 exhibits a 6.2 times improvement in terms of charge separation efficiency, reaching up to 5.6 %, accompanied by much faster charge migration. Thus, it has achieved a 6.4-fold increase of CH 4 yield in CO 2 photoreduction. Furthermore, the concept of IEF-induced better performance in oxide/sulfide in-plane heterojunction has been proved to be feasible toward other 2D sulfides, such as SnS 2 and ZnIn 2 S 4 . Overall, this work throws light on enhancing the IEF via in-plane heterojunction construction to improve the photocatalytic performance of 2D metal sulfides.
✓ 已验证
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2025
·
IF 19
Junqing Chen,Xinxin Yang,Le Yu,Yongheng Wang,Jingjing Li,Yuying Wu,Luhe Qi,Lu Chen,Jing Huang,Ziyang Lu,Chang Chen,Enlai Gao,He Liu,Chaoji Chen
In the plastic industry, replacing petrochemical-based polymers with naturally occurring bio-polymers (represented by cellulose), is a very promising route to circumvent the plastic pollution issue. However, the implementation of this is severely hindered by the high water affinity and flammability of such materials. Here, a verstile non-isocyanate polyurethane (NIPU) formulation composed of a CO 2 -based cyclic carbonate compound, a reactive amino-functionalized silicone oil concurrently capable of providing water-resistance and a flame-retardant moiety is designed. Compositing it with conventional cellulose paper (cellulose macrofiber network, CMN), a nonflammable and mechanically strong cellulose macrofiber network-based biocomposite (CMN-Biocomposite) can be easily obtained via transcarbamoylation reaction. Other than hydrogen bonding interaction among various components of CMN-Biocomposite, the intermolecular bond exchange mechanism between the dynamic carbamate moiety and hydroxyl of the cellulose is also experimentally and computationally determined as the governing factor for the high tensile strength of up to 57.9 MPa. Additionally, benefiting from the dynamic nature of the carbamate bond, the CMN-Biocomposite's processability and biodegradability outperform most petrochemical-based plastics. The superiority of the proposed synthetic strategy in achieving the long-term carbon neutrality goal by CO 2 fixation and excellent performance for plastic applications make the CMN-Biocomposite a very promising alternative to conventional plastics.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2019
·Vol. 31
·期 36
·1903499
·
IF 25.809
Shiyong Mou,Tongwei Wu,Junfeng Xie,Ya Zhang,Lei Ji,Hong Huang,Ting Wang,Yonglan Luo,Xiaoli Xiong,Bo Tang,Xuping Sun
Electrocatalysis has emerged as an attractive way for artificial CO 2 fixation to CH 3 OH, but the design and development of metal-free electrocatalyst for highly selective CH 3 OH formation still remains a key challenge. Here, it is demonstrated that boron phosphide nanoparticles perform highly efficiently as a nonmetal electrocatalyst toward electrochemical reduction of CO 2 to CH 3 OH with high selectivity. In 0.1 m KHCO 3 , this catalyst achieves a high Faradaic efficiency of 92.0% for CH 3 OH at −0.5 V versus reversible hydrogen electrode. Density functional theory calculations reveal that B and P synergistically promote the binding and activation of CO 2 , and the rate-determining step for the CO 2 reduction reaction is dominated by *CO + *OH to *CO + *H 2 O process with free energy change of 1.36 eV. In addition, CO and CH 2 O products are difficultly generated on BP (111) surface, which is responsible for the high activity and selectivity of the CO 2 -to-CH 3 OH conversion process.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Xianglin Xiang,Bicheng Zhu,Jianjun Zhang,Chenhui Jiang,Tao Chen,Huogen Yu,Jiaguo Yu,Linxi Wang
The sluggish oxygen evolution reaction (OER) is often the bottleneck of photocatalytic overall water splitting, greatly suppressing the hydrogen-production activity. Herein, the slow OER was replaced by selective benzyl alcohol (BA) oxidation to benzaldehyde (BD) to promote H 2 production. The photocatalytic reaction was conducted over CdS quantum dots , which were modified with Co 2+ hole cocatalysts to further accelerate the rate-limiting BA oxidation. The photocatalytic system exhibits an ultra-high H 2 -production rate of 257.8 mmol g −1 h −1 with a remarkable apparent quantum yield of 69.3% under 365-nm light irradiation. The high performance is attributed to the Co 2+ hole cocatalysts on CdS surfaces, which not only enhance light absorption but also facilitate photogenerated carrier transfer. More importantly, both photogenerated electrons and holes are fully utilized in meaningful reactions. This work exemplifies a bifunctional photocatalytic system for simultaneous production of self-separated hydrogen and benzaldehyde, both of which are important industrial products.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Zesheng Deng,Songchang Hu,Jiahui Ji,Shiqun Wu,Haijiao Xie,Mingyang Xing,Jinlong Zhang
Cu is widely used to prepare high-value products in photocatalytic CO 2 reduction reaction (CO2PR). The valence state of transition metals usually has a great impact on the catalytic process. However, the research on Cu valence in CO2PR is lack for its complex valence change. In current work, Cu x /P25 with stable Cu valence composition in CO2PR is prepared. The results show that Cu is composed of Cu 0 and Cu 2 O, and their proportions change regularly as Cu loading changing, which are linearly related to the selectivity of the corresponding products of CO2PR. Combined with thermodynamic and kinetic analysis, the CO adsorption and activation on the surface of Cu 0 and Cu 2 O are considered to be the key to determine the product of CO2PR, which is further confirmed by DFT calculation. Cu 0 and Cu 2 O are proved to be active site of producing CH 4 and CO, respectively. In this case, a reference for the study of highly selectivity Cu based photocatalysts is provided.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Jingwei Li,Jianrui Feng,Xiaomin Guo,Hongli Fang,Jiayi Chen,Churong Ma,Ruchun Li,Yuya Wang,Zebao Rui
This work reports a novel strategy to activate type III heterojunction through introducing defect sites at the interfaces and making use of the defect band as the bridge for storage, secondary excitation, and interband transfer of the photothermal induced charges for constructing two-component Type B heterojunction photothermocatalyst. Type III heterojunction WO 3−x /GdCrO 3 is activated by defect-band state W 5/4+ at WO 3−x interface under photothermal conditions, achieving efficient charge separation, high redox potential, and full visible light absorption. The as-bridged (or Type B) heterojunction WO 3−x -R/GdCrO 3 as non-noble metal catalyst demonstrates excellent photothermocatalytic performance in toluene degradation with a reaction rate five times higher than that of WO 3−x /GdCrO 3 with less interfacial defect sites as well as in CO 2 reduction with high CO and CH 4 yielding rates of 49.6 μmol g −1 h −1 and 18.5 μmol g −1 h −1 in gas-solid reaction system without sacrifice agent, evidently better than those reported in the literature.
✓ 已验证
DOI
高影响因子