文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3133至3144个,产品总数11,257个

切换升序
Co
IONICS · 2026 · IF 3.4

Alkaline hydrolysis assisted preparation of N/S co-doped anatase TiO2 for high-performance lithium storage

Shang Dong,Ju Xiaocheng,Jia Feiyang,Pan Yuede,Muhammad Naik,Zhang Guoli,Yang Zhewei,Li Gang,Wang Congwei

This work reports the preparation of N/S co-doped titanium dioxide (N/S-TiO 2 ) via in-situ sulfur doping assisted by alkaline hydrolysis followed by subsequent nitrogen doping and the lithium storage application. TiCl 4 is used as the titanium source, and sodium sulfide (Na 2 S) solution provides the alkaline hydrolysis environment and sulfur source, thus enabling the synthesis of S doped anatase TiO 2 (S-TiO 2 ). Urea is applied as the nitrogen source under high-temperature annealing, resulting in N/S co-doped anatase TiO 2 (N/S-TiO 2 ) materials. In addition, oxygen vacancies, which might enhance the electronic/ionic conductivity, is created. Consequently, N/S-TiO 2 (10:1) exhibits excellent rate performance (85.6 mAh g − 1 at 20 C) and long-term cycling stability (116.22 mAh g − 1 after 1500 cycles at 3 C). Further analysis using cyclic voltammetry (CV), galvanostatic intermittent titration technique (GITT), and electrochemical impedance spectroscopy (EIS) shows an enhanced pseudocapacitive contribution, increased lithium-ion diffusion coefficient, and reduced charge transfer resistance. These findings provide new insights for developing high-performance, structurally tunable metal oxide anode materials.

CAS / MDL: 7550-45-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Membranes · 2026 ·Vol. 16 ·期 7 ·243 · IF 4.2

Boosting Capacitive Deionization Performance via Bimetallic Synergistic Engineering of Electrospun Co/N-Doped Porous Carbon Nanofibers

Xinyue Ma,Yuan Li,Kuo Meng,Chengbo Kou,Binling Li,Zhonglei Zhu,Haojie Li,Zhihan Deng,Runze Yang,Hupeng Zhou,Xin Wang,Lang Luo,Fuming Chen,Chengding Gu,Yuxiao Zhang,Lu Guo

Capacitive deionization (CDI) is an environmentally advantageous desalination technology that is particularly suitable for the treatment of low- to medium-concentration saline water. Among different electrode materials, carbon materials are widely used due to their good electrical conductivity and high specific surface area, while they suffer from limited ion adsorption capacity. In this study, a cobalt/nitrogen-doped porous carbon fiber composite with Zn-induced porosity (CoNG@V@CNF), where “V” stands for “volatile pore-forming agent”, has been successfully prepared via electrospinning combined with a high-temperature carbonization process. The introduction of trace Co nanoparticles enhances the stability of porous graphene. In addition, N doping contributes to improved wettability and electronic conductivity, and the carbon fiber structure constructs a three-dimensional conductive network, providing fast channels for ion transport. Electrochemical tests show that the specific capacitance of CoNG@V@CNF reaches 252.76 F g−1, demonstrating its superior charge storage capability. Furthermore, this study achieved a high salt adsorption capacity of 58.28 mg g−1and a competitive desalination rate performance of 1.94 mg g−1min−1. After 40 cycles of testing, the salt adsorption capacity (SAC) remains at 56.72 mg g−1, demonstrating its high stability during multiple charging and discharging processes. This work provides a new design strategy for developing high-performance CDI electrode materials.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY · 2026 · IF 5.2

Preparation and anti-hepatocellular carcinoma effect of nanostructured lipid carriers co-loaded with sorafenib and berberine

Xiaoxi Gao,Dehai Hou,Tianyu Ma,Sizhuo Liu,Ruiping Wang,Yang Ping,Jin Su

A synergistic nano-strategy co-delivering sorafenib and berberine to overcome resistance and reduce toxicity. • Optimized nanostructured lipid carriers with high drug loading, sustained release, and good stability were successfully prepared. • Pharmacokinetics showed significantly enhanced oral bioavailability (4.59-fold and 2.28-fold for SORB and BBR). • Superior antitumor efficacy and biosafety were systematically verified both in vitro and in vivo. Sorafenib (SORB) is a first-line drug for advanced hepatocellular carcinoma, but its clinical use is limited by poor water solubility, low oral bioavailability, and drug resistance. Berberine (BBR) has been shown to reverse multidrug resistance and enhance drug sensitivity. Here, we designed a nanostructured lipid carrier co-loaded with SORB and BBR (SBER NLC). The optimized formulation had a particle size of 123.17 ± 3.28 nm, PDI of 0.211 ± 0.012, and zeta potential of −18.30 ± 0.95 mV. Encapsulation efficiencies were 78.77 ± 0.93% (SORB) and 79.58 ± 1.04% (BBR), with drug loadings of 1.75 ± 0.06% and 1.28 ± 0.13%, respectively. SBER NLC showed stable storage properties and sustained release in simulated gastrointestinal fluids. Pharmacokinetic studies demonstrated significantly enhanced oral bioavailability of both drugs compared with free drug suspension. In vitro, SBER NLC exhibited stronger cytotoxicity and migration inhibition against HepG2 cells, while the blank carrier was nontoxic. In a HepG2 xenograft mouse model, SBER NLC achieved the strongest tumor suppression without causing body weight loss or major organ damage, and induced extensive nuclear pyknosis and necrosis in tumor tissue. This study provides an efficient nano-delivery strategy for combined SORB and BBR in hepatocellular carcinoma treatment. Download: Download high-res image (226KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2026 · IF 19.9

Degradation-Activatable Nanozyme via Metal-Peptide Co-Design for Sustained Antioxidant Therapy in Traumatic Brain Injury

Huan Yang,Wenzhu Wang,Guo Wang,Xiaofan Xu,Jiayao Wulan,Guohua Li,Ting Li,Ting Xia,Lixi Zhao,Fang Zhang,Yirui Li,Kai Li,Yan Yu,Yuqing Lin

Conventional antioxidants and nanozymes often suffer from short half-lives and irreversible deactivation during biodegradation, severely limiting their efficacy in prolonged oxidative stress conditions like traumatic brain injury (TBI). Herein, we report a degradation-activatable nanozyme, C─Cu SA/MXene, via rational metal-peptide co-design that uniquely decouples catalytic longevity from structural persistence. By anchoring Cu single atoms onto biodegradable Mo 2 C MXene and functionalizing it with cysteine-rich CAQK peptide, we engineer a system where scaffold degradation enables in situ chelation of released Cu 2+ via Cu-S coordination, forming a stable CAQK-Cu complex retaining >80% of its original superoxide dismutase (SOD)-like activity (29 904.3 U/mg), which compares favorably to the referenced standard activity of natural SOD. This system also exhibits catalase-like activity for dual ROS scavenging. Spectroscopic and DFT analyses confirm Cu-S bonding narrows the HOMO-LUMO gap (0.05 eV) and preserves the redox-active electronic structure. In a murine TBI model, C─Cu SA/MXene-derived elements exhibit enhanced retention and preferential accumulation at injury sites, engaging the injured microenvironment, reduce lesion area 62%, increase hippocampal neuronal survival 1.7-fold, restore spatial memory, and activate PI3K/AKT pro-survival pathway. Critically, the material is metabolically cleared within 7 days without systemic toxicity, demonstrating a new degradation-resilient nanozyme platform for sustained ROS scavenging and TBI neuroprotection.

CAS / MDL: 298-83-9 7758-02-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES B-BIOINTERFACES · 2026 · IF 5.9

Inflammation-responsive liposomes co-delivering tobramycin and nitric oxide for overcoming mucus barriers against MRSA pneumonia

Jia-Qi Zhang,Yue Wang,Jun-Ge Ou,Jia-Wen Feng,Ping Gui,Dong Ma,Guan-Hai Wang

An inhalable chitosan-coated liposomal system was developed for Tob/NO co-delivery. • LC@Tob/NO enhanced mucus penetration and enabled mildly acidic pH-responsive NO release. • Nebulized LC@Tob/NO disrupted MRSA biofilms and alleviated infected lung inflammation. Methicillin-resistant Staphylococcus aureus (MRSA) pneumonia remains difficult to treat because mucus-associated transport barriers, biofilm formation, and excessive inflammation jointly limit therapeutic efficacy. Here, we developed a nebulizable chitosan-coated liposomal co-delivery system, LC@Tob/NO, for pulmonary treatment of MRSA pneumonia. The formulation integrates liposome-mediated pulmonary delivery, chitosan-associated surface reconstruction, tobramycin-mediated antibacterial activity, and mildly acidic inflammation-associated NO release from DETA/NO, thereby enabling localized Tob/NO co-loading for MRSA pneumonia therapy. LC@Tob/NO exhibited favorable physicochemical characteristics, enhanced transport through an artificial mucus matrix, and effective pulmonary deposition after nebulization. In vitro, the formulation showed potent antibacterial and antibiofilm activities against MRSA, while also attenuating oxidative stress and pro-inflammatory activation in macrophages. In a murine MRSA pneumonia model, nebulized LC@Tob/NO markedly reduced bacterial burden, alleviated lung edema and tissue injury, and suppressed inflammatory responses, with acceptable systemic biosafety. Supportive lung transcriptomic analysis suggested treatment-associated changes in immune and inflammatory pathways that were consistent with the observed bacterial clearance, cytokine reduction, and histological improvement. Collectively, LC@Tob/NO represents a promising inhalable biomaterial-based therapeutic strategy for MRSA pneumonia by integrating antibacterial activity with microenvironment regulation.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHINESE JOURNAL OF CATALYSIS · 2026 · IF 17.2

Boosting co-thermal coupled in-situ reduction of morphology- engineered carbonate via preparing distinct crystalline phases

Shaokang Yu,Meng Dong,Ming Xu,Yijia Lv,Zhiyang Peng,Weitao Zhang,Dabing Guo,Yixie Wang,Zhen Xue,Yusen Yang,Hao Li,Mingfei Shao

Co-thermal coupled in-situ hydrogenation of carbonates represents a promising strategy for producing metal oxide coupling syngas, facilitating the CO 2 conversion into value-added chemicals while reducing thermal decomposition temperatures. Nevertheless, the impact of CaCO 3 morphological modulation on hydrogenation performance and mechanisms has yet to be elucidated. Herein, we first report the morphology-controlled synthesis of CaCO 3 with distinct crystalline phases ( e.g. , rhombohedral calcite, spherical vaterite, and rod-shaped aragonite). This engineered morphology significantly enhances co-thermal coupled in-situ reduction, simultaneously lowering the decarboxylation temperature and promoting syngas formation. Compared with rhombohedral calcite, spherical vaterite exhibits superior CO selectivity and formation rate during reduction processes across various temperatures, reaching 96% and 0.80 mmol min –1 at 700 °C, respectively. Notably, rod-shaped aragonite achieves an exceptional CO selectivity of 86%, surpassing both rhombohedral calcite and spherical vaterite, and the CO formation rate (0.46 mmol min –1 ) is more than 2.3 times that of spherical vaterite at 550 °C. Moreover, combination of temperature programmed reduction-mass spectrometry and in-situ diffuse reflectance infrared Fourier transformed experiments reveals temperature-dependent hydrogenation mechanisms for different morphologies of CaCO 3 : direct hydrogenation dominates at relatively low temperatures, while at elevated temperatures, the dual mechanism combining direct hydrogenation and reverse water-gas shift reaction (HCOO* as the key intermediate) prevails. This study presents a novel strategy demonstrating high efficiency and low carbon for sustainable carbonate hydrogenation systems, offering significant scientific merit and industrial potential.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PHYSICAL REVIEW B · 2024 ·Vol. 109 ·期 10 ·104402 · IF 3.2

Effect of Co or Ni substitution on magnetism in the layered van der Waals ferromagnet F⁡e3⁢GaT⁢e2

Kejia Zhu,Mingjie Wang,Yazhou Deng,Mingliang Tian,Bin Lei,Xianhui Chen

We have grown a series of single crystals of two-dimensional van der Waals ferromagnet $\mathrm{F}{\mathrm{e}}_{3}\mathrm{GaT}{\mathrm{e}}_{2}$ substituted with Co or Ni. The large single crystals of ${(\mathrm{F}{\mathrm{e}}_{1\ensuremath{-}x}\mathrm{C}{\mathrm{o}}_{x})}_{3}\mathrm{GaT}{\mathrm{e}}_{2} (0\ensuremath{\le}x\ensuremath{\le}0.55)$ and ${(\mathrm{F}{\mathrm{e}}_{1\ensuremath{-}x}\mathrm{N}{\mathrm{i}}_{x})}_{3}\mathrm{GaT}{\mathrm{e}}_{2} (0\ensuremath{\le}x\ensuremath{\le}0.46)$ were characterized with x-ray diffraction, magnetic susceptibility, electrical resistivity, and Hall measurements. Our results show that the magnetic transition temperatures of $\mathrm{F}{\mathrm{e}}_{3}\mathrm{GaT}{\mathrm{e}}_{2}$ are gradually suppressed upon Co or Ni doping. A small amount of Co or Ni doping results in a significant increase of the coercive field. In particular, Co doping tunes the crystals from ferromagnetism to antiferromagnetism and then to the spin-glass state, while Ni doping tunes the crystals from ferromagnetism to spin-glass states. The strong doping-dependent magnetic properties suggest that $\mathrm{F}{\mathrm{e}}_{3}\mathrm{GaT}{\mathrm{e}}_{2}$ has great potential for spintronic applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Chemistry · 2026 · IF 15.6

Configuration-driven co-assembly of molecular contacts for improved efficiency and stability of perovskite solar cells

Haonan Wang,Mengyao Song,Xinyi Liu,Jian Lin,Guocan Chen,Kang Wei,Haibao Jin,Yu Hou,Shuang Yang

The buried interface between the hole transport layer (HTL) and perovskite absorber constitutes a critical locus for non-radiative recombination and mechanical failure in inverted perovskite solar cells (PSCs). Conventional self-assembled monolayers (SAMs) suffer from random molecular orientation and inhomogeneous coverage that hamper device efficiency and stability. Here, we demonstrate a molecular-configuration regulation strategy to drive ordered SAM orientation. By introducing pyrene-2,7-dicarboxylic acid (2CA) molecules with a bridge-like side-lying configuration, we promoted the orientational ordering of surrounding [4-(3,6-dimethyl-9H-carbazol-9-yl)butyl]phosphonic acid (Me-4PACz), leading to enhanced coverage and orientational uniformity of the SAM. This oriented co-assembled SAM (co-SAM) exhibited a more uniform potential distribution and reduced the residual tensile stress in the perovskite film from 47.6 to 16.8 MPa. The champion device achieved a power conversion efficiency (PCE) of 26.45% and retained 96.9% of its initial efficiency after 1350 h of maximum power point (MPP) tracking under 1-sun illumination at 65 °C and 65% relative humidity. These findings confirm that synergistic co-assembly through molecular-configuration control can reconcile high efficiency with operational stability in inverted PSCs. A molecular-configuration regulation strategy is reported, in which pyrene-2,7-dicarboxylic acid (2CA) adopts a bridge side-on configuration that enforces the orientational ordering of Me-4PACz, enabling inverted perovskite solar cells with a power conversion efficiency of 26.45% and improved long-term stability. Download: Download high-res image (163KB) Download: Download full-size image

CAS / MDL: 214622-81-8 36428-96-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
PROGRESS IN SOLID STATE CHEMISTRY · 2026 · IF 9.7

Mechanically reinforced NASICON electrolytes co-doped with Sc3+ and Mg2+ for dendrite-resistant sodium metal batteries

Yuhan Yi,Qiao Wang,Chuang Yu,Liping Li,Xin Zhang,Guangshe Li

Both the electrochemical and mechanical properties of solid-state electrolytes are crucial for achieving stable battery performance, while the widely studied NASICON-type electrolytes such as Na 3 Zr 2 Si 2 PO 12 (NZSP) still suffer from poor conductivity and a tendency to Na metal penetration. To address these problems simultaneously, we propose an integrated chemistry-structure-mechanics design principle, in which aliovalent Sc/Mg co-doping (chemistry) regulates lattice framework and grain-boundary evolution (structure), thereby enhancing mechanical robustness (mechanics) without compromising ionic transport. The optimized sample (Na 3.4 Zr 1.7 Sc 0.2 Mg 0.1 Si 2 PO 12 ) achieves a high room-temperature conductivity of 1.26 × 10 −3  S cm −1 and a 25% increase in hardness compared with the Mg-free analogue. The solid-state cell assembled with this electrolyte (Na/Na 3.4 Zr 1.7 Sc 0.2 Mg 0.1 Si 2 PO 12 /Na 3 V 2 (PO 4 ) 3 ) shows excellent cycling stability in a wide temperature range of 0-80 °C, and retains 90% of its initial capacity after 440 cycles at 30 °C and 1C. These results demonstrate that aliovalent co-doping to concurrently optimize lattice chemistry and ceramic microstructure is an effective route to high-performance NASICON electrolytes.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Energy Materials · 2026 · IF 5.5

MXene/CNT−Co Cathode Host with Synergistic Effect for Enhancing the Performance of Lithium−Sulfur Batteries

Yaoxuan Huang,Jia Li,Zhiping Wu,Liyue Cao,Guimin Li,Chuntong Lei,Haifu Huang,Xianqing Liang,Peilin Qing,Yuyang Huang,Wenzheng Zhou

Lithium−sulfur (Li−S) batteries are regarded as one of the most promising next-generation energy-storage systems owing to their ultrahigh theoretical energy density and the natural abundance of sulfur. However, their practical application is severely hindered by the intrinsically low electrical conductivity of sulfur, sluggish conversion kinetics of lithium polysulfides (LiPSs), and the shuttle effect of LiPSs. To address these challenges, we constructed a three-dimensional (3D) MXene/CNT−Co composite cathode host that integrates strong adsorption with efficient catalysis. The interconnected 3D MXene/CNT conductive framework effectively mitigates the restacking of MXene and establishes continuous electron/ion transport pathways. Meanwhile, the introduced Co provides highly active catalytic sites that markedly accelerate the reversible conversion of LiPSs, enhance chemical adsorption, and suppress polysulfide shuttling. Benefiting from the synergistic regulation of structure and catalysis, the S@MXene/CNT−Co electrode delivers promising electrochemical performance, exhibiting an initial specific capacity of 877.8 mAh g−1 at 1.0 C and retaining 381.2 mAh g−1 after 1000 cycles, corresponding to a capacity retention of 43.4 % and a capacity decay rate of 0.057 % per cycle. In addition, S@MXene/CNT−Co shows excellent rate capability, delivering 443.8 mAh g−1 at 2.0 C, which corresponds to 77.6 % of the initial capacity at 0.2 C. This work provides a viable strategy and rewarding perspective for designing high-performance MXene-based cathode materials for Li−S batteries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Energy Materials · 2026 · IF 5.5

Surface Reconstruction of Quaternary Deep Eutectic Solvent-Directed Co-Cu Nanosheets for Efficient Oxygen Evolution Electrocatalysis

Wenbin Wang,Wei Yang,Xin Yu,Tao Long,Sha Deng,Yinying Zhu,Haodong Sun,Hongwu Zhang,Guanghao Zhou

Developing cost-effective electrocatalysts with accelerated kinetics is pivotal for sustainable hydrogen production via water electrolysis. In this study, we propose a quaternary deep eutectic solvent (DES) system to directly fabricate Co-Cu alloy nanosheets on a NiMo foam substrate via one-step electrodeposition. Comprehensive characterizations reveal that the catalyst undergoes a dynamic surface reconstruction during electrochemical activation, evolving from initial nanosheets into a hierarchical rod-shaped architecture. This process generates a synergistic crystalline/amorphous heterojunction composed of CoOOH and Cu(OH)2, which profoundly optimizes the electronic structure. Consequently, the activated Co-Cu/NiMo catalyst delivers superior oxygen evolution reaction performance, requiring a low overpotential of 241 mV to reach 10 mA cm−2. Microkinetic and practical evaluations further highlight an impressive turnover frequency of 27 s−1 at 250 mV and a near-quantitative Faradaic efficiency of 98.4%. These metrics confirm that the bimetallic synergy fundamentally accelerates the intrinsic per-site reaction kinetics and ensures highly selective charge utilization. Coupled with robust durability exceeding 60 h, this work validates the efficacy of quaternary DESs in materials synthesis and provides valuable insights into reconstruction-induced activity enhancements in transition metal alloys.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING · 2026 ·Vol. 132 ·期 6 ·532 · IF 3

High-density cobalt/nitrogen co-doped graphene aerogels enable efficient oxygen evolution reaction through multicomponent synergy

Yang Jing,Liu Jiayi,Hu Rong,Chen Wei,Huang Zongyu,Qiao Hui,Qi Xiang

Atomically dispersed transition metal catalysts have emerged as promising alternatives to noble metal catalysts due to their tunable electronic structures, favorable adsorption energetics toward key intermediates, and maximal atomic utilization efficiency. However, their practical application is hindered by the instability of isolated metal atoms under oxidative conditions, their tendency to agglomerate, and inefficient charge transport. To address these issues, we report a cobalt-based catalyst supported on 3D porous N-doped graphene aerogel (Co-N-GA). In this structure, the nitrogen-doped coordination environment reduces the binding energy of Co atoms and allows them to be uniformly and stably anchored to the carbon framework through Co-N coordination. The electronic interaction of the Co-N coordination environment optimizes the adsorption energy of reaction intermediates, thereby enhancing the intrinsic activity. Furthermore, this 3D hierarchical porous structure not only effectively inhibits the stacking of graphene sheets, effectively enlarging the specific surface area and facilitating electrolyte penetration, but also establishes a multichannel conductive network, enabling fast electron transport. Benefiting from the stable anchoring of the Co atoms and the multi-component synergistic coupling effect, the Co-N-GA catalyst exhibits excellent OER performance in alkaline media. It delivers a low overpotential of only 168 mV at a current density of 10 mA cm − 2 , with a small Tafel slope of 51.02 mV dec − 1 , and demonstrates favorable long-term electrochemical stability. This work proposes a rationally designed strategy integrating structural engineering and multi-component synergistic enhancement, providing a feasible route for the development of high-performance non-precious metal OER electrocatalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。