文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3133至3144个,产品总数3,650个

切换升序
S)
Journal of Environmental Chemical Engineering · 2023 · IF 7.7

Sulfidized state and formation: Enhancement of nanoscale zero-valent iron on biochar(S-nZVI/BC) in activating peroxymonosulfate for Acid Red 73 degradation

Yuwei Ding,Meng Li,Qian Zhang,Yibo Zhang,Zhixuan Xia,Xiangyu Liu,Nanping Wu,Jie Peng

To improve the performance of the nanoscale zero-valent iron (nZVI)-based advanced oxidation process (AOPs), a sulfidation pre-modification endowed nZVI with stable reduction nature mechanism was proposed, and a coupled system of activating PMS with sulfidized nanoscale zero-valent iron supported by biochar(S-nZVI/BC@PMS) was constructed in this study. It could be found that sulfidation state and formation, largely dependent on the sulfidized modification method, had a great impact on the enhancement for nZVI/BC in activating PMS for Acid Red 73 degradation. Compared with original nZVI/BC, the formed FeS shell blocked the external air to protect the internal Fe 0 , and S-nZVI/BC became relatively hydrophobic, which could slow down the material corrosion by water and dissolved oxygen to enhance the reaction durability. Appropriate sulfidation reduced the electrochemical impedance and enhanced the electrical conductivity of the catalyst, which facilitated the electron transfer in the system, and the participation of reducing sulfur species enabled the reaction to form a positive cycle and ensure a prolonged duration. Excessive sulfidation caused the material to become unstable and thus susceptible to air erosion, reducing the efficiency of contaminant removal. Due to the FeS protective shell, hydrophobicity of S-nZVI/BC and the promoted electron transfer in the system, S-nZVI/BC@PMS system secured more free radicals and had longer reaction time under the same conditions. In addition, S-nZVI/BC had good antioxidant properties, universality, and reusability for practical applications. These findings not only elucidated the superiority of S-nZVI/BC@PMS system but also provided new insights into cost-saving and efficient advanced oxidation processes.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
OPTICAL MATERIALS · 2023 · IF 3.9

A S-scheme heterojunction Fe-doped TiO2/SnO2 with rich oxygen vacancies for photo-Fenton degradation of Rhodamine B under visible light illumination

Vu Hoang Huong,Van-Can Nguyen,Minh Ngoc Ha,Duy Van Pham,Thanh Binh Nguyen,Yuan-Ron Ma,An Bang Ngac,Trinh Thi Loan

The photo-Fenton process serves as a highly efficient approach for removing contaminants from wastewater. In this study, we developed a Fe-doped TiO 2 /SnO 2 heterojunction catalyst to enhance the efficiency of photo-Fenton catalytic activity under visible light . To investigate the physical properties of the catalysts, various characterization techniques were utilized, including XRD , SEM, TEM , HR-TEM, UV-VIS, PL , and XPS . The 7% mol Fe-doped TiO 2 /SnO 2 -OVs (TFS-7) heterostructure exhibited the highest rate constant of 17.03 × 10 −3 min −1 ; 8.4 and 2.1 times higher than the individual components. This enhanced performance is mainly attributed to the rapid migration of photoinduced electrons to Fe 3+ and the subsequent generation of Fe 2+ , which improved electron transfer capacity and facilitated the rapid production of hydroxyl radicals (•OH) through the reaction between Fe 2+ and H 2 O 2 . We proposed a S-scheme mechanism for the Fe-doped TiO 2 /SnO 2 -OVs catalyst based on the analysis of reactive species trapping experiments, photoluminescence (PL) spectra, ultraviolet photoelectron spectroscopy (UPS), and density functional theory (DFT). These findings offer not only a straightforward approach for synthesizing highly active photocatalysts for the degradation of RhB dye, but also a framework for the construction of heterostructure photocatalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2022 ·Vol. 57 ·期 47 ·21693-21708 · IF 4.682

Red emission B, N, S-co-doped carbon dots with pH-responsive functionality for colorimetric and fluorescent dual-mode detection of Ag+ ions

Du Jinyan,Xu Na,Wang Chaofeng,Shu Qin,Xu Qidi,Zhang Ping,Zhuo Shujuan,Zhu Changqing

Novel red-emitting B, N, S-co-doped carbon dots (B,N,S-CDs) were prepared via a one-step hydrothermal carbonization. The obtained B,N,S-CDs are found to be responsive to the pH changes, i.e., the fluorescence intensities obviously change with the watershed of pH 7.4, accompanied by a blue-shift of the fluorescence emission wavelengths with the pH from 1 to 13. The surface state and size of the B, N, S-CDs are responsible for the fantastic responses. Furthermore, introduction of Ag + into the B, N, S-CDs resulted in fluorescence quenching and apparent changes of extinction value, thereby the quantitative assay can be successfully realized where a linear range of 0.1–400 and 0–700 μM with a detection limit of 38 and 107 nM is obtained, respectively. The mechanism might be due to static quenching and induced electron/energy transfer (ET) resulted from the formation of non-fluorescent complex. Strikingly, Ag + can be visualized via evident color changes from red to navy blue under UV light and from maroon to dark brown under sunlight, respectively. These findings indicate that the as-obtained B, N, S-CDs possess a great potential as a dual probe of pH and Ag + ions for biosensing. Graphical Abstract The red-emitting fluorescent B, N, S-CDs with a fantastic pH-sensitive feature, as a dual-mode nanosensor via colorimetric and fluorescence outputs, were applied to detect Ag + ions with the LOD of 107 and 38 nM, respectively.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2022 · IF 9.965

Engineering adjacent N, P and S active sites on hierarchical porous carbon nanoshells for superior oxygen reduction reaction and rechargeable Zn-air batteries

Qingshan Zhao,Xiaojie Tan,Tengfei Liu,Shuai Hou,Wanxin Ni,Hao Huang,Jinqiang Zhang,Zhongxue Yang,Dawei Li,Han Hu,Mingbo Wu

Heteroatom-doped carbon materials have been regarded as sustainable alternatives to the noble-metal catalysts for oxygen reduction reaction (ORR), while the catalytic performances still remain unsatisfactory. Herein, we develop a metal-free adjacent N, P and S-codoped hierarchical porous carbon nanoshells (NPS-HPCNs) through a novel layer-by-layer template coating method. The NPS-HPCNs is rationally fabricated by crosslinking of polyethyenemine (PEI) and phytic acid (PA) on nano-SiO 2 template surface and subsequently coating of viscous sulfur-bearing petroleum pitch, followed by pyrolysis and alkaline etching. Soft X-ray absorption near-edge spectroscopy (XANES) analysis and density functional theory (DFT) calculations prove the engineering of adjacent N, P and S atoms to generate synergistic and reinforced active sites for oxygen electrocatalysis. The NPS-HPCNs manifests excellent ORR activity with a half-wave potential (E 1/2 ) of 0.86 V, as well as promoted durability and methanol tolerance in alkaline medium. Remarkably, the NPS-HPCNs-based Zn-air battery delivers an open-circuit voltage of 1.479 V, a considerable peak power density of 206 mW cm −2 and robust cycling stability (over 200 h), even exceeding the commercial Pt/C catalyst. This study offers fundamental insights into the construction and synergistic mechanism of adjacent heteroatoms on carbon substrate, providing advanced metal-free electrocatalysts for Zn-air batteries and other energy conversion and storage devices.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2023 · IF 15.1

Tungsten and oxygen dual vacancies regulation of the S-scheme ZnSe/ZnWO4 heterojunction with local polarization electric field for efficient CO2 photocatalytic reduction

Ting Liang,Zebin Yu,Yuejing Bin,Shiming Zhang,Jingwen Wei,Yujia Liu,Tingting Zhu,Songyu Fan,Yuxiang Shen,Shuangfei Wang,Yanping Hou

Inefficient separation and sluggish transfer of photogenerated charges on the photocatalyst is one of the bottlenecks for CO 2 photocatalytic reduction. In this study, the ZnSe/ZnWO 4 heterojunction with tungsten vacancies and oxygen vacancies (ZZ-30%-Vw,o) was synthesized by hydrothermal process and post-etching method for CO 2 reduction. Various characterizations showed superior structural and optical properties of the ZZ-30%-Vw,o heterojunction; results of ESR and work function calculation demonstrated that the heterojunction conformed to S-scheme charge transfer mechanism. Results of various tests and density functional theory (DFT) calculation confirmed the existence of W and O vacancies, as well as the locally polarized electric field (PEF). The PEF and the built-in electric field (IEF) could not only accelerate carriers separation and transfer, but also enhance CO 2 adsorption and activation, thus enhancing photocatalytic activity toward CO 2 reduction. The ZZ-30%-Vw,o composite exhibited the highest CO yield of 96.91 µmol/g/h, approximately 21.0 times of the ZnSe . Moreover, the ZZ-30%-Vw,o possessed favorable structure-performance stability. The COOH* was the most important intermediate during CO 2 reduction, and possible CO 2 reduction pathways and mechanism were proposed. This work paves a feasible way for improving photocatalytic activity via introducing dual surface vacancies on heterojunction photocatalysts.

CAS / MDL: 111-42-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2023 · IF 15.1

Metal-organic framework-derived S-NiFe PBA coupled with NiFe layered double hydroxides as Mott-Schottky electrocatalysts for efficient alkaline oxygen evolution reaction

Kaiyuan Shen,Yu Tang,Qihang Zhou,Ying Zhang,Wen Ge,Xuxia Shai,Shuping Deng,Peizhi Yang,Shukang Deng,Jinsong Wang

Development of economical and high-efficient catalytic electrodes is a top priority for oxygen evolution reactions (OER). Non-precious metal based metal–organic frameworks (MOFs) in powder form remain a series of problems including the assistance of adhesive, poor conductivity and stability. Herein, a well-designed S-NiFe PBA@NiFe/NF composite with a unique Mott-Schottky heterojunction architecture was purposefully constructed by self-sacrificing template approach and electrodeposition. The growth of S-NiFe PBA@NiFe on NF through in situ synthesis promotes efficient electron conduction between the NF substrate and S-NiFe PBA@NiFe catalyst, leading to a stable and highly effective working state. The Mott-Schottky heterojunctions between S-NiFe PBA and NiFe-layered double hydroxides (LDH) effectively expedite electronic transmission. Consequently, S-NiFe PBA@NiFe/NF exhibits outstanding OER behavior at 1.0 M KOH, exhibiting a low Tafel slope of 39 mV dec −1 and at 10 mA cm −2 , reaching an unexpectedly low overpotential of 196.7 mV. Furthermore, the S-NiFe PBA@NiFe/NF maintains long-term durability without evident performance degradation for 100 h.

CAS / MDL: 1310-58-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2023 · IF 6.2

From weed to N/O/S co-doped honeycomb-like porous carbon for high-performance supercapacitors: a facile and friendly one-step carbonization

Zhentao Bian,Meng Li,Taoqin Liu,Chengcheng Liu,Yanyan Zhu,Hongxia Cao,Guang Zhu,Hongyan Wang,Chong Chen,Keying Zhang

Recent research interest has increased in the production of heteroatoms-doped porous carbon with controlled morphology from biomass. However, there is still a significant challenge in resolving alkaline solutions that cause equipment corrosion and devising a simple and adaptable approach. In this study, N/O/S co-doped honeycomb-like porous carbons were synthesized from a widely cultivated annual weed ( Hemistepta Iyrata Bunge ) using a simple and eco-friendly method. The sodium hydroxide (NaOH)/urea system was utilized as the pore-forming agent and cellulose solvent, with urea as the nitrogen source. By varying the activation temperature, the as-prepared porous carbon has a high specific surface area (709 m 2 g −1 ), a large total pore volume (0.44 cm 3 g −1 ), and a high heteroatom content of 6.20 at% nitrogen and 8.12 at% oxygen. The prepared porous materials were evaluated as electrodes for supercapacitors . The product (HIB-PHC-750 °C) exhibited a high specific capacitance (353.6 F g −1 at 0.2 A g −1 ) at a carbonization temperature of 750 °C. Additionally, the HIB-PHC-750 °C-based symmetric device with a wide voltage range of 2.0 V possessed a desirable energy density of 44.22 Wh kg −1 at 500 W kg −1 . Moreover, the HIB-PHC-750 °C also demonstrated outstanding cycling stability with 98.2 % capacitance retention after 10,000 cycles. This research provided a facile and favorable alternative method for preparing N/O/S co-doped honeycomb-like porous carbon for electrochemical energy storage devices.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
DIAMOND AND RELATED MATERIALS · 2022 · IF 3.806

O3-assisted low-temperature preparation of marginal S and graphitic N co-doped graphene oxide as high-performance electrocatalyst for bisphenol A degradation

Qian Zhang,Si Chen,Zhi Huang,Yanying Liu,Jun-ming Hong

In this research, a novel insight was provided for oriented low-temperature S and N doping into graphene oxide (GO).Given the gradual concern in the high-temperature dependence of traditional annealing method for the oriented design of heteroatom doping, utilizing O 3 etching-assisted heteroatom doping can simultaneously resolve the problems of energy consumption and doping species design. In this research, with O 3 etching, 100 at.% marginal S (C-SO X -C) and 92 at.% graphitic N co-doped O 3 -S/NGO were successfully synthesized at annealing temperature of 200 °C. Characterization results showed that S and N doping via O 3 etching maintained the sheet-like structure of GO without much stacking (layer thickness of 4–5 nm). In addition, active defects were formed by O 3 etching and S/N atom doping to provide active center for catalytic reaction . The electrocatalytic degradation behavior proved that 100 % bisphenol A degradation efficiency could be achieved by O 3 -S/NGO within 30 min and that the main active species generated during the reaction were O 2 •− , 1 O 2 and active chlorine. The possible pathways of bisphenol A degradation were also determined to complete the discussion. This project was based on the environmental demand of organic pollution control and suggested an optimal preparation strategy for high-performance catalyst preparation and utilization.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2022 ·Vol. 33 ·期 3 ·2210551 · IF 19.924

Two-Step Cooling Strategy for Synergistic Control of CuZn and SnZn Defects Enabling 12.87% Efficiency (Ag,Cu)2ZnSn(S,Se)4 Solar Cells

Hang Geng,Mengyang Wang,Songfan Wang,Dongxing Kou,Zhengji Zhou,Wenhui Zhou,Yafang Qi,Shengjie Yuan,Litao Han,Yuena Meng,Sixin Wu

Abundant intrinsic defects and defect clusters in Cu 2 ZnSn(S,Se) 4 (CZTSSe) solar cells lead to severe nonradiative recombination and limited photoelectric performance. Therefore, developing effective method to suppress the detrimental defects is the key to achieve high-efficiency solar cell. Herein, a convenient two-step cooling strategy in selenization process is reported to suppress the Cu Zn and Sn Zn defects and defect clusters synergistically. The results show that rapid cooling during section from selenization temperature to turning temperature can inhibit the volatilization of Sn and restrain the corresponding Sn-related defects, while slow cooling during the subsequent temperature section can reduce the degree of Cu-Zn disorder. Benefitting from the synergistic effect of two-step cooling, a significantly lowered concentration of Sn Zn and Cu Zn defect and their defect clusters [2Cu Zn +Sn Zn ] in absorber is observed, meanwhile, a reduced band tailing effect and promoted carrier collection efficiency of the photovoltaic device is obtained. Finally, a device with improved open-circuit voltage ( V oc ) of 505.5 mV and efficiency of 12.87% is achieved. This study demonstrates the impact of cooling process on defects controlling for the first time and provides a simple and effective new strategy for intrinsic defect control, which may be universal in other inorganic thin film solar cells.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COMPOSITES PART B-ENGINEERING · 2022 · IF 11.322

A cocklebur-like sulfur host with the TiO2-VOx heterostructure efficiently implementing one-step adsorption-diffusion-conversion towards long-life Li–S batteries

Kedi Cai,Tan Wang,Zhenhua Wang,Jiajun Wang,Lan Li,Chuangang Yao,Xiaoshi Lang

Lithium-sulfur (Li–S) batteries are considered to be promising next-generation rechargeable system. However, the shuttle effect for lithium polysulfides (LiPSs) and slow sulfur reaction kinetics due to multistep phase transitions severely limit the practical application of Li–S batteries. Herein, via dual-strategy of heterogeneous interface and defect engineering, a cocklebur-like sulfur host with the TiO 2 -VO x heterostructure (CTVHs) for long-life Li–S batteries is fabricated, and atomic-level clarification of the chemical interaction between the substrate and LiPSs from a theoretical viewpoint is achieved. Benefiting from the heterostructure, the high adsorption energy heterojunction interface works as capturing centers to trap LiPSs which ensures rapid diffusion to VO x . In addition, the defect-rich spiny VO x is endowed with high catalytic activity towards LiPSs and fast lithium-ion migration so as to effectively implement one-step adsorption diffusion transformation. DFT calculations show that the introduction of a heterostructure can change the electronic structure, thereby improving the adsorption capacity of CTVHs. Electrochemical measurements reveal favorable kinetics for Li 2 S deposition, better cyclability, and an outstanding discharge capacity. The CTVHs/S cathode delivers a slow capacity decay rate of 0.029% per cycle and achieves nearly 100% coulombic efficiency (CE) at 0.5 C over 1400 cycles. This proposed strategy provides broad prospects to promote the adsorption-conversion of LiPSs for long-life Li–S batteries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2022 · IF 9.965

From pure water to hydrogen peroxide on a novel 2,5,8-triamino-tri-s-triazine (melem)-derived photocatalyst with a high apparent quantum efficiency

Qiaoyu Zhang,Chengcheng Chen,Fangting Liu,Zhengguo Zhang,Xiaoming Fang

Photocatalytic hydrogen peroxide (H 2 O 2 ) production is a green process but remains a great challenge. Herein, a novel photocatalyst with high activity for H 2 O 2 production, is developed based on 2,5,8-triamino-tri-s-triazine (melem) by linking it with 2, 3-naphthalene dicarboxylic anhydride (NDA). The obtained melem/NDA hybrid not only exhibited narrowed band gap and obviously enhanced visible light absorption, but also showed reduced charge recombination originated from its spatial distribution in HOMO and LUMO induced by the introduction of NDA as verified by DFT calculations. More significantly, the sufficient LUMO and HOMO positions for the optimal sample, melem/NDA 0.5 , ensured efficient H 2 O 2 production from pure water via both the oxygen reduction reactions mainly through the two-step one-electron path and the water oxidation reaction through the one-step two-electron path. Consequently, melem/NDA 0.5 achieves an apparent quantum efficiency of as high as 6.9 % at 420 nm. This work sheds light on developing high-performance organic photocatalysts for boosting photocatalytic H 2 O 2 production.

CAS / MDL: 106-51-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ANALYTICAL AND BIOANALYTICAL CHEMISTRY · 2022 ·Vol. 414 ·期 24 ·7253-7263 · IF 4.478

Synthesis of intrinsic dual-emission type N,S-doped carbon dots for ratiometric fluorescence detection of Cr (VI) and application in cellular imaging

Mei Xiping,Wang Dongxiu,Wang Songbai,Li Junfen,Dong Chuan

In this paper, intrinsic dual-emission fluorescent carbon dots (CDs) doped with N and S atoms have been firstly fabricated. The characterization results show that CDs are successfully synthesized with two separate fluorescence emissions at 468 nm and 628 nm, respectively. The strong and selective interaction of Cr (VI) ions with CDs lead to obvious fluorescence decrease of CDs at 468 nm, which is caused by a mixed quenching mechanism. At the same time, the fluorescence at 628 nm increase. Interestingly, the CDs solution show obvious color change under the daylight and UV light, so visualization detection of Cr (VI) can be realized in water samples. Based on the data of the emission intensity ratios of F 468 / F 628 , Cr (VI) can be detected from 3.8 to 38.9 μM combined with the linear correlation coefficient of 0.998, and the lowest detection concentration is 47.2 nM. The platform is satisfactorily applied to the detection of Cr (VI) ions in water samples. In addition, the CDs could be applied as fluorescent probes for cell imaging with dual fluorescent emission. Graphical abstract

CAS / MDL: 7647-14-5 7664-93-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。