CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Siyuan Meng,Fangnan Lv,Jieqing Chen,Linlin Tao,Hao Guo,Danhui Wang,Jie Sun,Jian Li,Ning Liu,Wei Xu,Meirong Huo
A biomimetic antigen outpost is engineered to sustainably co-deliver tumor antigens, siSOCS1, and Mn 2+ adjuvant. • Plasma gel recruits DCs to the injection site, while CRT on nanovaccines acts as an "eat-me" signal to enhance antigen uptake. • SOCS1 silencing and PD-L1 blockade synergistically empower DCs to more effectively prime and activate cytotoxic T lymphocytes (CTLs). • PD-L1 blockade further protects activated CTLs from tumor cell-mediated exhaustion, enabling sustained tumor killing and potent antitumor immunity in TNBC models. Tumor vaccines represent a promising immunotherapy approach but are challenged by rapid systemic clearance, low immunogenicity, and various immunosuppressive mechanisms. To overcome these issues, we created a biomimetic antigen outpost system to enhance vaccine delivery and immune activation. This system uses cationic 1,2-dihydroxybenzene-modified poly- l -lysine to co-load small interfering RNA targeting cytokine-suppressing factor 1 (siSOCS1) and immunoadjuvant (Mn 2+ ) as the core. This core is further coated with calreticulin (CRT)-enriched tumor cell membranes to form a nanovaccine (CRTM/PBM siSOCS1 ), which is ultimately encapsulated in a plasma gel (PG@CRTM/PBM siSOCS1 ). This design prolongs the vaccine's in vivo retention, recruits dendritic cells (DCs) by simulating subcutaneous hemorrhage signals, and enhances effective antigen uptake through CRT-mediated “eat me” signals. Upon DC internalization, the nanovaccine undergoes non-lysosomal trafficking, avoiding siSOCS1 degradation. The efficient SOCS1 silencing alleviates intracellular immunosuppressive feedback and, together with synergistic DC activation by antigens and Mn 2+ , further promotes DC maturation and antigen cross-presentation. In a triple-negative breast cancer model, the combination with anti-PD-L1 antibody simultaneously blocked PD-L1 on both mature DCs and tumor cells, significantly enhancing cytotoxic T lymphocyte function at both the immune priming and effector stages, and demonstrating potent antitumor efficacy. This multi-level intervention strategy provides a promising platform for enhancing cancer immunotherapy. Download: Download high-res image (112KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
POLYMER
·
2026
·
IF 5.1
Jie Li,Yiming Sun,Tianqi Yang,Xiaofei Ye,Yi Tang,Weiyi Jin,Yicheng Dong,Wei Li,Xiangdong Zhang,Chenliang Gong
Currently, expensive precious metals such as silver are widely used for iodine adsorption in industry. Despite their adsorption capability, they suffer from significant drawbacks, including high cost and limited recyclability. Consequently, developing cost-effective, high-capacity iodine capture materials remains a formidable challenge. Vanillin-derived compounds provide an attractive platform because commercial vanillin is an industrially available bio-based aromatic compound and can introduce electron-rich oxygen-containing sites for iodine binding through charge-transfer interactions. Herein, we report a series of dynamic polyimine film materials with tunable crosslinking densities, synthesized through a modular strategy based on a vanillin-derived dialdehyde. By selecting low-cost monomers, these materials show a low estimated material cost. Moreover, their closed-loop recyclability (93% monomer recovery) and reprocessability may reduce long-term material consumption. Benefiting from the combined contribution of imine bonds and oxygen heteroatoms within the polyimine network, the films exhibit a high gaseous iodine adsorption capacity (5.73 g g −1 ) within a short duration (3.5 h). In this work, non-radioactive iodine was used as a surrogate to evaluate iodine-capture behavior. The role of heteroatomic adsorption sites in iodine uptake was investigated through a combination of characterization techniques and density functional theory (DFT) calculations. This work provides a useful framework for developing efficient, economical, and recyclable iodine adsorbents.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yue Wang,Chao Wu,Dekang Shang,Siyu Xu,Xueping Huang,Jian Luo
Functional microparticles regulate soil interfacial behavior of emulsifiable concentrates. • Microparticle–emulsion coupling is driven by charge-topology-synergized electrostatic–mechanical interlocking. • Stable interfacial coupling suppresses initial release, enhances retention, and reduces leaching risk. • Functional microparticle adjuvants extend weed control under repeated rainfall and improve biosafety. • The adjuvant system is simple to prepare and readily applied by conventional tank-mixing. Pre-emergence weeding is a critical component of farmland weed management systems, and its efficacy largely depends on the film formation state and interfacial stability of pre-emergence herbicides at the soil surface. Conventional emulsifiable concentrate (EC) formulations often suffer from poor film-forming performance and short residual activity. In this study, from an interfacial coupling perspective, we propose polymeric functional microparticles (FMs) that synergistically leverages charge regulation and surface topology to modulate the film formation behavior and persistence of EC at soil interfaces. Polymeric microparticles were constructed via solution polymerization, and their surfaces were modified with ionic surfactants to tune surface charge. The influence of surface charge and topology on FMs-EC coupling was investigated. Results show that anionic functional microparticles (AFMs) primarily engage in passive coupling with EC droplets through evaporation-induced interactions, exhibiting limited interfacial retention. In contrast, cationic functional microparticles (CFMs) actively capture EC droplets in the aqueous phase via electrostatic attraction and mechanical interlocking due to their rough surface topology, thereby generating a stable FMs-EC complex. This synergistic electrostatic-topological coupling effectively limits the initial excessive exposure of the active ingredient while enhancing interfacial retention and leaching resistance at the soil surface, thereby sustaining pre-emergence weed control under rainfall conditions, with the CFMs system showing superior efficacy. Moreover, this FMs adjuvant system demonstrated favorable biosafety. By elucidating the charge-topology-driven interfacial coupling mechanism, this study provides new theoretical insights and technical strategies for the functionalization of conventional EC formulations in pre-emergence weed control. Download: Download high-res image (170KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
BIOMATERIALS
·
2026
·
IF 13.6
Siyu Bao,Xiawei Zhao,Danyang Chen,Hongying Wang,Xu Tian,Qiao Li,Rongrong Qin,Jianhai Yang,Wenguang Liu
Zwitterionic hydrogels are attractive physical barriers for preventing postoperative abdominal adhesions because of their outstanding antifouling properties; however, their inherent biological inertness and poor degradability often hinder therapeutic efficacy and clinical translational potential. Herein, we report a bioactive and dissociable zwitterionic nanocomposite hydrogel that integrates zwitterionic polymer chains with clearance potential, hydrolytically dissociable networks, and Prussian blue (PB) nanozymes. A molecular-weight-controlled polycarboxybetaine acrylate precursor (PCBOAA, ∼50 kDa) was prepared by reversible addition–fragmentation chain-transfer (RAFT) polymerization and subsequently crosslinked with dithiothreitol via thiol-acrylate Michael addition reaction to form a zwitterionic hydrogel featuring β-thioether ester linkage, which could gradually dissociate under physiological conditions into low-molecular-weight polymer with reduced risk of prolonged retention. Incorporation of PB nanoparticles further endowed the PCBOAA@PB hydrogel with antioxidative and immunomodulatory activity. In vitro , PCBOAA@PB hydrogel could effectively resist protein adsorption and cell adhesion and suppress pro-inflammatory macrophage polarization. In a rat cecum–abdominal wall adhesion model, it exhibited markedly superior anti-adhesion efficacy compared with a clinically used hyaluronic acid hydrogel. Mechanistically, this excellent anti-adhesion efficacy of PCBOAA@PB hydrogel as a physical barrier stemmed from its dual ability to reprogram the postoperative inflammatory–fibrotic microenvironment and reduce excessive collagen deposition. In summary, this work provides a zwitterionic hydrogel design strategy that integrates antifouling, microenvironment modulation, and clearance potential for effective adhesion prevention.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2026
·
IF 8.7
Wei-jia Li,Zhi-bo Zhang,Wan-jin Yan,Zhi Chen,Cong-ming Tang,Li Chang
Adsorption technology is essential for water remediation and resource recovery to reduce environmental pollution. Although Metal-organic frameworks (MOFs) exhibit outstanding adsorption capabilities, their high preparation cost hinders their wide application. Alternatively, chitosan (CS) hydrogels offer wastewater treatment at an affordable cost. Herein, polyethyleneimine-modified CS hydrogel coated with MOF (Ce-BTC/CS-PEI) was prepared as a high-capacity sorbent for methyl orange (MO) sequestration. A comprehensive characterization of the Ce-BTC/CS-PEI composite was carried out, involving morphological and elemental analysis (SEM-EDS), crystal phase identification (XRD), surface area and porosity measurements (BET), surface charge evaluation (zeta potential), molecular structure determination (FTIR), and surface chemical state analysis (XPS). The increased interfacial contact area and the positively charged zeta potential of Ce-BTC/CS-PEI enabled efficient adsorption of MO in MO/methylene blue mixtures. The experimental data demonstrated strong agreement with the Langmuir equilibrium isotherm and second-order rate equations. Ce-BTC/CS-PEI demonstrated exceptional uptake performance, reaching 819.67 mg·g −1 after 18 h. Thermodynamic analysis showed that adsorption was a natural exothermic procedure. After four cycles, the material retained 70% of its adsorption efficiency. Therefore, Ce-BTC/CS-PEI exhibits excellent capability as an excellent, ecologically friendly, and inexpensive adsorbent for selective MO removal.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Qiang Liu,Kai Cui,Zihang Liao,Changyi Wu,Longhui He,Shuwei Yao
Electrospun alumina-mullite ceramic nanofibrous membranes show great potential for high-temperature thermal insulation applications. However, the influence of scandium oxide (Sc 2 O 3 ) addition on their phase evolution and high-temperature stability has rarely been investigated. Herein, the concentration-dependent effect of Sc 2 O 3 (0–5 wt.%) on these membranes was systematically studied. Microstructural and crystallization kinetics analyses reveal a non-monotonic doping behavior. A Sc 2 O 3 content of 1 wt.% delays mullitization and retains a fine-grained, flexible nanofiber architecture after calcination at 1400 °C. In contrast, Sc 2 O 3 additions of 3 wt.% and 5 wt.% induce excessive lattice distortion, accelerate mullite crystallization, and promote abnormal grain growth. These findings demonstrate that the Sc 2 O 3 doping concentration determines the transition from grain refinement to coarsening, providing a basis for designing durable ultra-high-temperature ceramic nanofibrous membranes.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 10.7
Xiang Li,Ya Li,Lang Xu,Jie Ding,Mingjiao Wu,Ziqian Wang,Zhipeng Wang,Wei Bai,Fangkun Li,Mingwu Xiang
Single-crystal-like LiNi x Co y Mn 1-x-y O 2 (SCL-NCM) has attracted considerable attention as a promising cathode material owing to its excellent structural stability, but conventional routes often require complex processing and yield large particles (≥1 μm) that limit Li + transport. Herein, a series of submicron-scale single-crystal-like LiNi 0.5 Co 0.2 Mn 0.3 O 2 (SCL-NCM523) materials with particle sizes of 100–400 nm were synthesized using a microwave-assisted flameless liquid-phase combustion method. The effect of secondary calcination temperature on their structural evolution and electrochemical performance was systematically investigated. The optimized SCL-NCM523–2 sample obtained at 800 °C exhibits single-crystal-like features, an average particle size of approximately 204 nm, and relatively low Li + /Ni 2+ cation mixing. These structural advantages contribute to improved structural stability, reduced polarization, and favorable Li + transport kinetics, enabling SCL-NCM523–2 to deliver a high initial discharge capacity of 147.6 mAh g −1 and maintain 87.2% capacity retention after 100 cycles at 1.0C. In addition, when paired with a Si C anode, the SCL-NCM523–2 // Si C full cell delivers a capacity retention of 91.2% after 100 cycles at 1.0C within the voltage range of 2.8–4.3 V. This study provides a low-temperature route for preparing submicron SCL-NCM523.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Rui Fu,Zunteng Pu,Guoxin Han,Yinglun Sun,Zhepeng Liu,Fang Liu,Haiqiu Zhang
Cystine-functionalized MXene (MC)/poly(ether-benzimidazole) (OPBI) composite membranes were developed for high-temperature proton exchange membrane fuel cells (HT-PEMFCs). The functionalization was confirmed by XPS and FTIR. The optimal OPBI/MC-15 membrane exhibited an acid doping level of 27.8 and proton conductivity of 163.7 mS cm −1 at 180 °C under anhydrous conditions, which was 2.8-fold higher than that of pristine OPBI. The disulfide (S–S) moieties served as effective radical scavengers, enabling exceptional oxidative stability for the composite membranes. Specifically, sample OPBI/MC-15 retained approximately 95% of its initial mass after 200 h in Fenton's reagent at 80 °C, representing a dramatic improvement over pristine OPBI. Single-cell tests delivered peak power densities of 592 and 887 mW cm −2 at 140 and 160 °C, respectively, with open-circuit voltages exceeding 0.97 V. This work demonstrates a synergistic strategy combining enhanced proton transport and oxidative stability for advanced HT-PEM applications.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2026
·
IF 4.8
Shiyu Yang,Wenqi Qin,Yanji Zhang,Jun Chai,Ronghuan Wan,Hong Lei,Yi Wei
The Pt/γ-AlOOH-IP was prepared using γ-AlOOH support by impregnation method. • The strong MSI and electron-rich Pt sites are fabricated in Pt/γ-AlOOH-IP. • Pt/γ-AlOOH-IP exhibits excellent catalytic performance in the hydrosilylation. • Electron-rich Pt sites promote the TES adsorption and Si–H bond cleavage. Hydrosilylation is a highly important method for the preparation of organosilicon compounds, in which homogeneous Pt catalysts exist poor recyclability and high production costs. Here, we prepared supported Pt-based catalyst (Pt/γ-AlOOH-IP) using γ-AlOOH support by impregnation (IP) method, in which strong metal-support interactions (MSI) and electron-rich Pt sites were fabricated. Catalytic measurements show that Pt/γ-AlOOH-IP has the best catalytic activity in the conversion of 1-octene and triethoxysilane (TES)via hydrosilylation to n-octyltriethoxysilane (OTES), the yield of OTES is 93.6% with 94.3% selectivity at 80 ℃, 2.5 h, m (Pt) /m (1-octene) = 7.5 × 10 −5 and n (TES) /n (1-octene) = 1.33, which are commensurate with homogeneous Karstedt’s catalyst. The significant catalytic performance of Pt/γ-AlOOH-IP originates from more electron transfer between Pt and γ-AlOOH. Electron-rich Pt sites promote TES chemisorption and Si–H bond dissociation, and improve catalytic activity, which are corroborated by the DFT calculations. This finding enhances the insight of MSI and offers an easy method to prepare efficient heterogeneous catalysts for industrial hydrosilylation reactions. Download: Download high-res image (166KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Surfaces and Interfaces
·
2026
·
IF 6
Huan Song,Le Song,Fangzhou Wu,Yonglei Xing,Xiaoyong Jin,Fang Wan,Gang Ni
Non-metal doping provides a route to tune metal sites in carbon catalysts for peroxymonosulfate (PMS) activation. Here, a phosphorus-modified N-doped carbon catalyst with an ultralow cobalt loading (Co2-P1-NC; 0.14 wt% Co) was prepared. Under optimized conditions, the Co2-P1-NC/PMS system removed phenol (Ph) within 2.5 min, with an apparent pseudo-first-order rate constant of 2.068 min −1 . Co-free NC and P-NC showed only limited activity, indicating that Co-containing sites account for most of the catalytic enhancement. Quenching tests, electron paramagnetic resonance (EPR), PMSO probing, in situ Raman spectroscopy, electrochemical measurements, and premixing experiments collectively support the coexistence of radical and nonradical routes, with high-valent Co species and interfacial electron transfer making major contributions under the tested conditions. Density functional theory calculations using representative CoN 4 and CoN 3 P models showed that P substitution made PMS adsorption more favorable (from −2.56 to −3.38 eV), whereas the calculated O–O bond length and Bader charge changed only slightly; the adsorption enhancement is therefore attributed mainly to altered geometry and interfacial electronic interactions. P modification also reduced the measured Co leaching concentration from 0.016 to 0.005 mg L −1 . The catalyst rapidly removed several phenolic pollutants, although activity declined during reuse and was inhibited by carbonate and humic acid. These results demonstrate a promising low-Co catalyst design while identifying stability and water-matrix effects as priorities for further development. Download: Download high-res image (308KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Bing Tian,Lifei Liu,Weizhen Zhao,Zhengkun Zhang,Guidong Li,Ting Song
The photoresist composed of small molecules was developed. • The photoresist was directly patterned in a one-step process via in situ reactions. • The ionic liquid improves interfacial compatibility between PR and silicon wafer. • Photoresists based on the thiol-ene reaction exhibited preferable sensitivity. • The photoresist was utilized in quantum dot lithography and 3D printing. To circumvent the complex synthesis procedures associated with conventional polymeric photoresists (PRs), we developed an in situ polymerization and crosslinking strategy for small molecules based on thiol-ene free-radical photopolymerization. Ionic liquid (IL), commonly used to modulate interfacial interactions and polymerization reactions, was therefore introduced as one of the monomers to improve the patterning performance. The film-forming ability was improved by the addition of the hydrophilic IL 1-vinyl-3-butylimidazolium bromide (VBIMBr) without the use of toxic hexamethyldisilazane (HMDS) vapor. The lithographic performance with varying IL content was studied, achieving line resolutions of 0.8 μm for deep ultraviolet (DUV) lithography and 100 nm for electron beam lithography (EBL), respectively. Furthermore, the effects of IL on the lithographic kinetics and mechanism were systematically investigated. The homogeneous network induced by thiol-ene photopolymerization enables a uniform distribution of quantum dots (QDs) through effective immobilization, highlighting its potential for QD lithography. It was found that the PR enables the fabrication of multicolor luminescent patterns over a wide scale range (from the micrometer to the millimeter scale) on diverse substrates, with an impressive resolution of 1 μm, demonstrating its potential for applications in additive manufacturing. Additionally, the PR is also applicable to 3D printing owing to its unique formation process. Download: Download high-res image (347KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2026
·
IF 3.2
Kunxian Chen,Jianghong Chen,Yadong Zhu,Hao Wang,Xiaolian Wang
Magnesium hydride (MgH 2 ) is considered a promising solid-state hydrogen storage material owing to its high hydrogen storage capacity and abundant Mg resources. However, its practical application is still limited by sluggish low-temperature hydrogen absorption/desorption kinetics, high dehydrogenation temperature, and insufficient cycling stability. Although NaNbO 3 -based catalysts have recently shown potential for improving the hydrogen storage performance of MgH 2 , the effect of processing-controlled NaNbO 3 morphology on catalyst dispersion, interfacial contact, and hydrogen absorption/desorption kinetics remains unclear. Herein, morphology-regulated NaNbO 3 catalysts were synthesized via a hydrothermal-calcination route by varying the hydrothermal temperature and introduced into MgH 2 through high-energy ball milling. Among the investigated samples, the composite containing 7 wt% NaNbO 3 prepared at 200°C (MgH 2 –7 wt.% NaNbO 3 -200) exhibited fast and reversible hydrogen storage performance, absorbing 5.0 wt% H 2 within 12 s at 200°C and desorbing 6.0 wt% H 2 within 6 min at 300°C. After 30 cycles, it retained 6.12 wt% H 2 , corresponding to 89.7% of its initial dehydrogenation capacity, and showed an apparent dehydrogenation activation energy of 86.96 kJ mol −1 . The enhanced performance is mainly attributed to improved MgH 2 /NaNbO 3 interfacial contact, together with a possible contribution from partially reduced Nb-containing species formed during repeated hydrogen sorption.
✓ 已验证
产品关联
DOI
高影响因子