SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Chenchen Wu,Litong Chen,Yuling Yang,Xuxuan Yang,Zhixiang Zeng,Yong Zhou,Lei Tang,Lijing Zhu
Solar-driven interfacial evaporation is a promising way to produce desalinated freshwater. However, the evaporation flux of the evaporators is still insufficient to meet practical demands. In this paper, a kind of highly efficient evaporator with vertical channels based on a metal–organic framework (MOF) is designed and prepared. First, 3D polyvinyl alcohol-agar (PVA-Agar) scaffolds were fabricated via the ice template method at a temperature of −18 ℃. They possess hierarchical pores from the bottom surface to the top surface, improving upward water-pumping and inhibiting salt accumulation. In addition, the PVA-Agar scaffolds were further in situ decorated by Fe-MIL88A microrods with a length of 1.8 ± 0.2 μm and a diameter of 401.0 ± 27.5 nm, forming the PVA-Agar/MIL88A evaporators. It can be found that the loading yield of MIL88A and the agar content strongly affect the upward water-pumping performance, hydrogen bonding, water vaporization enthalpy, and absorptivity of the evaporators. The optimum PVA-Agar/MIL88A evaporator with a MIL88A loading yield of 17.4 wt% and an agar content of 70.0 wt% has an ultrahigh pure water evaporation flux of 5.0 kg m -2 h −1 and 4.2 kg m -2 h −1 in 3.5 wt% NaCl under sun illumination at 1000 W m −2 . Moreover, the outdoor solar-driven desalination tests suggest that the PVA-Agar/MIL88A evaporator exhibits good solar-driven desalination performances and stability. PVA-Agar/MIL88A evaporators will greatly promote the development of seawater desalination because of their high evaporation flux and good salt resistance.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Nan Li,Haibo Liu,Bin Yang,Bo Xie,Yangtao Wu,Lingjun Bu,Shiqing Zhou
This study establishes a manganese-activated ferrate (Mn(II)/Fe(VI)) process for autonomous Microcystis aeruginosa removal, addressing the critical challenge of additive dependency and secondary pollution in conventional algal control strategies. System performance was critically governed by Mn/Fe stoichiometric ratios and total oxidant dosages, with near-complete algal elimination (>98 %) achieved at Mn/Fe = 1:1 (≥200 μM total dosage) while maintaining cell integrity. TOC analysis revealed dosage-dependent control over cellular lysis and intracellular organic matter (IOM) releasing. Spectroscopic characterization demonstrated process efficacy in degrading dissolved organics through decreased UV 254 absorbance (unsaturation reduction), declining SUVA (aromaticity loss), and elevated E2/E3 ratios (molecular weight reduction). Comparative analyses identified dissolved organic carbon as a more sensitive cellular stress indicator than K + release, attributed to MnO 2 adsorptive sequestration of released intracellular constituents. Mechanistic investigations revealed dual role of Mn(II) that rapid surface accumulation provided oxidative protection, while subsequent Fe(VI)-driven MnO x formation enabled floc growth through particle bridging. Water matrix effects followed valence-specific modulation, where divalent cations (Ca 2+ /Mg 2+ ) enhanced removal via charge screening, and excessive monovalent ions (Na + /NH 4 + ) impaired efficiency through ionic strength interference. This work pioneers a green oxidation-coagulation synergy that eliminates supplemental additives, offering a sustainable paradigm for mitigating cell rupture and IOM release in algae-laden water treatment.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2025
·
IF 5.6
Xinyue Mao,Qingnan Meng,Mu Yuan,Sifan Wang,Shiyin Huang,Yuting Qiu
Fe-based diamond -composites exhibit considerable potential for applications owing to their excellent mechanical and wear properties. However, the weak interfacial bonding between the Fe-based matrix and diamond particles has consistently limited their overall performance, adversely affecting the working efficiency of diamond tools. In this study, a Mo-B-C coating was pre-coated on the diamond surface. During the sintering process, the in-situ gradient chemical reaction between Fe and Mo-B-C coating resulted in the formation of a biomimetic ‘brick-mud’ interfacial structure consisting of Mo 2 FeB 2 , Mo 2 BC, and amorphous carbon layers. The “brick-mud” structure, combining soft and hard phases, enhanced the interfacial toughness by effectively deflecting, branching, and prolonging interfacial cracks. Additionally, the transitional diffusion of Fe within the interface layer helpd alleviate the interfacial stress concentration and suppress diamond graphitization. As a result, the optimization of interface bonding contributed to a 26.1 % increase in bending strength and a 156 % enhancement in abrasive ratio of the Fe-based diamond composites, offering a novel strategy for interfacial modification in Fe-based diamond tools.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2025
·
IF 7.7
Hongyang Mao,Shulei Li,Lihui Gao,Si Shen,Yanhong Liu,Keyi Xu
Coal gasification fine slag (CGFS), a typical coal-based solid waste, poses significant environmental challenges with an annual output exceeding 50 million tons in China. The complex distribution of carbon and ash components necessitates the development of a material that can effectively harness both carbon and ash for comprehensive utilization. While layered double hydroxides (LDHs) exhibit catalytic potential, their performance is often limited by severe particle aggregation. Herein, we engineered a robust carbon-anchored Fe-Al-LDH composite (CGFS-LDH) through hydrothermal co-precipitation, demonstrating exceptional efficacy in H 2 O 2 activation for phenol degradation. Remarkably, CGFS-LDH achieved 100 % removal of 200 mg L −1 phenol within 60 min. Advanced characterization (XPS, XRD, EPR, LC-MS, and electrochemical analysis) revealed that CGFS serves dual roles: as a structural scaffold preventing LDH aggregation and as an electron shuttle promoting Fe 2+ /Fe 3+ redox cycling. Although trace amounts of Fe (0.2 wt%) and Al (0.3 wt%) leached due to dynamic precipitation-dissolution equilibrium, the catalyst maintained outstanding stability over multiple cycles, with negligible activity loss. This work introduces an effective strategy for the comprehensive utilization and high-value transformation of CGFS, while also providing novel insights into the development of highly efficient and stable porous nanocomposites catalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Yuting Zhang,Jiaqi Wang,Xuesong Zhang,Wenxiu Qin,Youbin Si
Preliminary studies have demonstrated that light can facilitate the biogeochemical cycling of iron, influencing the valence state of heavy metals, solidifying them, and ultimately achieving detoxification effects. However, few studies have focused on the oxidation of Sb(III) in different iron minerals and the differences in mechanisms. This study explored the photooxidation of Sb(III) in the presence of various iron minerals (hematite, pyrite and goethite), focusing on how different iron minerals influenced the oxidation process and the mechanisms involved. Among the minerals tested, pyrite exhibited exceptional photooxidation performance, achieving an Sb(III) oxidation efficiency of 67.03% after 300 minutes. This superior photooxidation activity correlated with pyrite’s significant Fe(II) yield (11.70 μg/L). Our study demonstrated that light irradiation enhanced Sb(III) oxidation through three iron-based minerals. Light exposure drove the generation of Fe(II) within these minerals, initiating Fe(II)/Fe(III) redox cycling. This process promoted reactive oxygen species (ROS) generation, including hydroxyl radicals (•OH), superoxide radicals (O 2 •− ) and hydrogen peroxide (H 2 O 2 ), which collectively mediated Sb(III) oxidation to the less toxic Sb(V). In the photooxidation of Sb(III), •OH played a critical role in reactions involving hematite and pyrite, while O 2 •− dominated in goethite and pyrite systems. H 2 O 2 was found to have a pivotal role across all three iron mineral systems. Additionally, photogenerated holes ( h + ) significantly enhanced Sb(III) oxidation in the pyrite system. This research highlighted the impact of light on the biogeochemical cycling of iron and its role in facilitating the oxidation of Sb(III) through reactions that involve photo-generated electrons and free radicals.
✓ 已验证
产品关联
DOI
高影响因子
WATER RESEARCH
·
2025
·
IF 12.4
Cong Zhang,Zhipeng Zhang,Shuang Zhang,Yifeng Chen,Dunjie Li,Yongmei Li
Anaerobic co-digestion of sulfur-containing organic wastes with waste-activated sludge containing iron–phosphorus compounds (FePs) was recently suggested as an environment-friendly strategy to promote phosphate release, energy recovery, and hydrogen sulfide (H 2 S) control. Nevertheless, the mechanistic coupling between FePs speciation and the concurrent transformation of carbon, sulfur, iron, and phosphorus within this system remains to be fully elucidated. To address this knowledge gap, methionine, a typical hydrolysis product of sulfur-containing organics, and five FePs prevalent in sludge (ferric-phosphate tetrahydrate (FePO 4 ⋅4H 2 O), ferric-phosphate dihydrate (FePO 4 ⋅2H 2 O), vivianite (Fe 3 (PO 4 ) 2 ·8H 2 O), phosphate coprecipitated with Fe(III) (COP-P), and phosphate adsorption on hydrous ferric oxide (HFO-P)) were selected to elucidate C-S-Fe-P transformations in this study. The results showed that the H 2 S and methyl mercaptan productions decreased by >96% and >99%, respectively, while the methane production rate increased by 51.60–103.9% in the presence of FePs. The reaction between FePs and sulfide promoted the transformation of gaseous H 2 S and aqueous S 2− to solid sulfur species (elemental sulfur and iron sulfide precipitates), while simultaneously promoting the release of PO 4 3− from FePs. The formation of Fe(II) species derived from both abiotic sulfide-driven reduction and microbial-mediated iron reduction processes. The reduction rates of FePO 4 ⋅2H 2 O and FePO 4 ⋅4H 2 O were higher than those of COP-P and HFO-P, owing to their higher thermodynamic favorability. A negative correlation was observed between the Fe/P molar ratio and PO 4 3− release efficiency. FePO 4 (FePO 4 ⋅2H 2 O and FePO 4 ⋅4H 2 O) with the lowest Fe/P molar ratio achieved the highest P release efficiency (89.83–91.01%). Metagenomics analysis revealed that the SELENBP1 gene related to the degradation of methanethiol to sulfide was upregulated by 21.12–51.72% in the presence of FePs, and the genes involved in propionate metabolism, methylotrophic, and hydrogenotrophic methanogenesis were up-regulated concurrently. This study provides an in-depth understanding of C-S-Fe-P interactions and transformations during the anaerobic co-digestion of sulfur-containing organic wastes with FePs-containing sludge, helping to enhance methane production and the recovery of phosphorus and sulfur.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CATALYSIS
·
2025
·
IF 6.5
Qiangqiang Lu,Yong Kou,Lei Xiao,Jiahao Yu,Chong Chen,Jun Di,Guigao Liu,Wei Jiang,Gazi Hao
The energetic ammonium salts represent a class of oxidizer materials that are extensively utilized in contemporary propellant systems. However, the catalytic pyrolysis mechanisms of these salts remain inadequately explored, hindering the efficient application of new energetic ammonium salts. In this study, taking typical energetic ammonium salts (ammonium perchlorate (AP), ammonium nitrate (AN) and ammonium dinitramide (ADN)) as examples, their pyrolysis on the surface of the prepared Fe single-atom catalysts and the combustion flames of the powders were investigated. We learned that Fe single-atoms can promote the pyrolysis and enhance the flame intensity of ammonium salts. The mechanism of Fe single-atom catalyzed ammonium salts has been investigated through density-functional-theory (DFT) calculations, and the results well explained the experimental phenomena. The AP molecule produces oxygen most readily, primarily through the pyrolysis of *ClO 4 (−3.70 eV). The idea of solving the heat-absorbing decomposition of AN is proposed to catalyze its complete decomposition and to avoid the production of NO. The low decomposition temperature of ADN is due to the five major pyrolysis pathways of the molecule and the presence of self-catalytic intermediates. This paper offers guidelines for comprehending the pyrolysis and combustion mechanisms of energetic ammonium salts.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2024
·
IF 5.3
Fei-Feng Mao,Yi-An Wang,Yan Zhou,Ming-Shuai Sun,Wei Hui,Duan-Jian Tao
The efficient and selective conversion of biomass-derived vicinal diols into high-value-added chemicals represents a pivotal area of research that has garnered substantial interest within the scientific community. In this work, three ultralow loading Fe supports on N-doped carbon nanosphere catalysts (Fe@NC-T) were successfully prepared using the hard template method with acid etching. The selective conversion of vicinal diols into aldehydes, ketones, and amines over the Fe@NC-800 nanosphere catalyst was achieved through an anaerobic cleavage of C–C bonds and successfully utilized autologous hydrogen resources. The exceptional catalytic activity of the Fe@NC-800 nanosphere catalyst may be credited to the presence of highly dispersed Fe species at the active sites, which has been verified through several characterization techniques, control tests, and density functional theory calculations. In addition, the Fe@NC-800 nanosphere catalyst also demonstrated its wide applicability and excellent reusability under the operating conditions. We believe that this study presents an auspicious scheme for the highly selective conversion of vicinal diols into high value-added carbonyl compounds and amine products.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2025
·
IF 21.1
Zhiyuan Ning,Xiangqian Tan,Qian Wei,Yue Liu,Ruigang Wang,He Guo,Jingyu Ren,Qiuling Ma,Jian Zhou,Tiecheng Wang
A nanoconfinement strategy was employed to encapsulate iron species within carbon nanotubes (Fe-CCNTs) in this study, enabling rapid degradation of sulfadiazine (SDZ) through sulfite (S(IV)) activation. The Fe-CCNTs catalyst enhanced the generation of reactive species during the S(IV) activation process. Nearly complete SDZ degradation was achieved within 10 min, with a reaction rate constant 1.8 times higher than that of the non-confined system. Fe-CCNTs shifted the mechanism from a radical pathway (SO 4 • − and •OH) to a non-radical pathway ( 1 O 2 and Fe IV =O), thereby improving SDZ degradation efficiency. The nanoconfinement effect increased the local charge density, accelerating electron transfer and promoting the formation of reactive species. This system exhibited strong catalytic performance, high reusability, and resistance to interference. Furthermore, the Fe-CCNTs/S(IV) treatment reduced the abundance of intestinal pathogenic bacteria and the toxicity of byproducts. The Fe-CCNTs/S(IV) system offers a promising and low-toxicity solution for antibiotic removal in water treatment.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2025
·
IF 3.9
Yu Shi,Guanhua Ren,Jiajie He,Wei Yang,Jingjing Bao,Licheng Sun,Zhengyu Mo,Min Du
With the growing global demand for sustainable energy solutions, there is increasing interest in the conversion of low-grade heat into useful electrical energy. Thermoelectrochemical cells (TECs) are a promising technology for low-grade heat harvesting. However, sluggish reaction kinetics limit the power generation and efficiency of the TECs. In this study, we propose a Fe–N–C catalyst in situ grown on three-dimensional graphite felt as a self-supporting electrode for TECs. The graphite felt substrate provides a multidimensional structure to facilitate mass transport, while the Fe–N–C catalyst enhances electrode activity for redox reactions. The physicochemical properties and electrochemical performance of the electrode are characterized. The results demonstrate that the optimized electrode achieves a maximum power density of 1938 mW/m2 and a Carnot-relative efficiency of 2.29%, representing 11-fold and 12-fold improvements over graphite felt, respectively. These metrics surpass recent benchmarks in the field of TEC research. Furthermore, the electrode maintains a Carnot-relative efficiency of 2.0% in solar-driven TEC operation, demonstrating feasibility in photothermal and thermoelectrochemical conversion. Modeling analysis reveals that ion transport dominates heat and mass transfer processes, critically influencing power generation and stability, thereby highlighting the need for future optimization of ion transport pathways. This work validates the feasibility of in situ-grown Fe–N–C catalysts on graphite felt as high-performance TEC electrodes, offering a strategic framework for advancing waste heat recovery systems through rational electrode design and transport engineering.
✓ 已验证
产品关联
DOI
高影响因子
Materials Horizons
·
2025
·
IF 10.7
Qianwen Chen,Yanbing Huang,Wanshun Duan,Qijia Su,Yilong Wang,Fuxi Bao,Junjun Zhang,Wen Guo
The kinetics of the oxygen evolution reaction (OER) of Co3O4 in alkaline media can be promoted by a bimetallic co-doping strategy. Herein, we synthesize a Zn/Fe co-doped Co3O4 nanostructure (ZnFe-Co3O4) to enhance the oxygen evolution reaction performance in the alkaline media. The ZnFe-Co3O4 electrocatalyst exhibits a low overpotentials of 255 mV at 10 mA cm-2, a Tafel slope of 54 mV dec-1 in 1.0 M KOH and excellent long-term durability up to 120 hours at 100 mA cm−2. The X-ray photoelectron spectroscopy (XPS) reveals that Zn occupies octahedral Co3+ sites and Fe occupies tetrahedral Co2+ sites in the Co3O4 lattice. The experimental results together with theory calculations collectively demonstrate that ZnFe-Co3O4 follows the lattice oxygen mechanism (LOM) during OER process. In situ Raman spectroscopy shows that the truly reactive FeOOH/CoOOH species are formed through surface reconstruction during OER. Furthermore, it is found that the synergistic effects of Zn and Fe doping, which stabilize the Co3O4 structure and promote the generation of active (oxy)hydroxide species, are identified as key factors in the enhanced electrocatalytic performance. This work offers a novel concept for enhancing the electrocatalytic activity of electrocatalysts through doping strategies and provides guidance for the rational design of ideal electrocatalyst.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Surfaces and Interfaces
·
2025
·
IF 6.3
Chunjing Shi,Menghang Wang,Zhenyu Zhang,Hongxiu Zhou,Pengfei Hu,Longhua He,Xingzhong Liu,Huaxiang Cai,Zehong Pang
Ceramic dentures differ from those produced by additive manufacturing, and manual polishing is employed for ceramic dentures due to their hard-brittle nature, complex shapes, and thin-walled structures with thicknesses less than 1.0 mm. This presents challenges for the medical and manufacturing industries. To address these challenges, we prepared a novel ternary composite of Fe 3 O 4 @TiO 2 @PB (Prussian blue) to establish a photo-Fenton system. This composite enhances the transport of photogenerated electrons and facilitates the generation of radicals, demonstrating high photocatalytic activity for the polishing and degradation of pollutants without the need for sacrificial agents. Meanwhile, Fe 3 O 4 @TiO 2 @PB was utilized to develop a new photocatalytic magnetorheological polishing slurry. The slurry consisted of sorbitol, hydrogen peroxide, Fe 3 O 4 @TiO 2 @PB, and ceria (0.025 wt. %). After polishing, the surface roughness (Sa) decreased from 5.538 to 0.081 μm, representing a reduction of 98.54 % compared to the pristine surface. Due to photogenerated hydroxyl radicals, the Si-OH and Li-OH bonds can be created on the surface of the ceramic dentures, facilitating defects removal. Before and after polishing, the ceramic dentures enhanced the inhibition rates of Escherichia coli and Staphylococcus aureus from 50 % to 74 % and from 49 % to 80 % over the course of one day, respectively. Through irradiation with simulated sunlight, Fe 3 O 4 @TiO 2 @PB generates electrons, holes, and hydroxyl radicals, leading to the degradation of amoxicillin (AMOX) and polysorbate (PS20) by up to 99 % within 60 min. Additionally, Fe 3 O 4 @TiO 2 @PB was successfully separated and reused from the developed slurry. Therefore, the designed and developed novel ternary composite, Fe 3 O 4 @TiO 2 @PB, achieves photocatalysis, photodegradation, and recycling, offering new solutions for the medical, manufacturing, and environmental industries.
✓ 已验证
产品关联
DOI
高影响因子