Nature Communications
·
2026
·
IF 18.1
Zhang Chi,Tang Wenxiang,Li Xiangyang,Zhang Chi,Zou Zongpeng,Zhu Yifeng,Tang Shengwei,Chen Yunfa,Gao Pu-Xian
Design of active but stable interfaces in supported metal catalysts represents an emerging research theme lately, given its critical importance for tailoring and enabling selectivity and efficiency of heterogeneous reactions. Herein, we report a generic sunlight-driven epitaxial growth strategy to engineer catalytically active interfacial perimeters defined by subnanometric Pt dispersed on TiO 2 nanoparticle supports. Such interfacial perimeters are populated with a unique type of Pt 4+ -O-Ti 3+ reactive sites, resulting in much more efficient and robust CO oxidation than most supported Pt catalysts reported so far. These subnanometric PtO x -TiO 2 interfacial structures are found to dynamically evolve during CO oxidation, adaptively optimizing their adsorption behaviors toward reactants and SO 2 . Combined with the activated interfacial lattice oxygen species via the electronic metal-support interaction effect, the Mars-van Krevelen pathway is activated at low temperature to oxidize CO at high conversion efficiency. The sunlight-driven synthetic strategy is successfully extended to other metal catalysts supported by metal oxide and perovskite materials, offering a new paradigm for designing adaptive catalysts toward a variety of heterogeneous catalytic reactions.
✓ 已验证
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2026
·Vol. 193
·期 6
·384
·
IF 5.4
Xu Ziyu,Cao Jinru,Wang Ying,Chen Tingsha,Wang Yue,Xu Huaqiu,Zeng Huihui,Huang Wenyi,Cheng Hao,Kong Hongxing,Lu Yao,Feng Jun
Human carboxylesterase 1 (hCE1) is a serine hydrolase that is distributed widely in the human liver, intestines, and various tumour tissues. It has now become a biomarker associated with diseases such as cancer. Consequently, the measurement of hCE1 levels in human serum is of significant importance for the diagnosis and assessment of these diseases. The present study involved the preparation of Ag/CQDs/ZIF-8 nanocomposites, which incorporated silver nanoparticles (Ag NPs) and carbon quantum dots (CQDs) into the ZIF-8 framework. The combination of this composite with an enzyme-linked immunosorbent assay (ELISA) and the utilisation of benzidine as the signal molecule resulted in the development of a fluorescence (FL)/surface-enhanced Raman scattering (SERS) dual-mode sensor, which was employed for the sensitive detection of hCE1 in serum. This dual-mode sensor combines the advantages of both FL and SERS technologies, demonstrating excellent selectivity and stability, and enhancing the accuracy and reliability of quantitative measurements. The limits of detection (LOD) for the FL mode and SERS mode were determined to be 0.1 and 0.072 ng·mL − 1 , respectively, with the recoveries ranging from 92.44% to 117.47%. The satisfactory outcomes obtained from testing on real sample confirm the sensor’s excellent suitability for use in complex biological matrices. Consequently, this dual-mode sensor shows considerable promise for the detection of biomolecules in clinical samples, thereby demonstrating significant potential for clinical applications. Graphical abstract The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
PubMed
高影响因子
Scientific Reports
·
2026
·Vol. 16
·期 1
·12610
·
IF 4.9
Li Yapeng,Zhang Zhengwei,Li Hongji,Zhang Guixin,Ren Junting,Gong Manyu,Li Haodong,Sun Shibo,Zhang Ying,Li Na,Chen Xiaoning
Chlorpyrifos (CPF) is a widely used insecticide known for its extended persistence in soil and water. It can induce non-alcoholic fatty liver disease (NAFLD) in mice. However, the specific molecular mechanisms responsible for CPF-induced NAFLD remain partially understood. Utilizing network toxicology analysis, we have identified TP53, HSP90AA1, AKT1, and JUN as pivotal driver genes orchestrating NAFLD progression triggered by CPF. A predictive nomogram constructed on these core genes demonstrates promising translational prospects for NAFLD. Gene-set enrichment analysis (GSEA) underscores the significance of the tricarboxylic acid (TCA) cycle and histidine metabolism as critical pathways associated with CPF-induced NAFLD. Evaluation of immune infiltration patterns reveals notable changes in the immunological milieu and accelerated disease advancement in CPF-induced NAFLD. Molecular docking and dynamic simulations provide support for the formation of stable complexes between CPF and proteins encoded by the identified core genes. Ultimately, biomedical experiments confirmed that CPF exacerbates the pathological progression of NAFLD by stabilizing HSP90AA1 protein and promoting the phosphorylation of TP53 and JUN. This study elucidates the molecular mechanisms underpinning CPF-induced NAFLD, providing a theoretical foundation for comprehending its pathogenesis.
✓ 已验证
DOI
PubMed
高影响因子
Communications Chemistry
·
2026
·
IF 6.9
Niu Jiajia,Zhao Jichun,Yue Liqing,Zang Wanchen,Jin Zhe,Fu Cuiliu,Chen Chen,Dong Li,Zhu Youliang,Li Xiaojie
In solid-phase microextraction (SPME) research, selecting a coating adsorbent with good compatibility for target molecules can be difficult, and there is no specific migration testing method for vinyl acetate monomer, which is commonly used in the production of food contact materials (FCMs). First, 13 metal–organic frameworks (MOFs) with different structural characteristics and surface chemical environments were prepared and divided into three groups (good, medium, and poor) based on the dynamic vapor sorption (DVS) method. The distinction of superiority and inferiority determined by the DVS method was completely consistent with that determined by the extraction effect of the SPME probe, and the data from the two variables exhibited a statistically significant positive correlation. Then, the electrostatic potential (ESP) distribution on the typical material surface and target molecule and the charge density difference (CDD) of their interaction during adsorption were obtained using a computational simulation method. The results showed that ZIF-68 and ZIF-70 had the highest adsorption energy, which was consistent with the adsorption performance. Finally, ZIF-68 was selected as the optimal adsorption material, and the extraction conditions were optimized. The optimized method was successfully applied to test the specific migration amounts of several ethylene vinyl acetate (EVA) copolymer materials. The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
PubMed
高影响因子
Communications Materials
·
2026
·
IF 9.1
Sun Zhaoyang,Yang Zixuan,Xu Bin,Chen Binmeng
In-situ growth of polymer has shown great promise in smart rheology control of cement-based materials, a critical demand for ‘construction-of-the-future’ applications. However, its mechanistic role in governing time-evolving rheology of cement paste remains unclear. Here, we show this role by investigating in-situ polymerization in cement pastes under varying initiator concentrations, revealing how polymer chain growth modulates rheological behaviors. Yield stress development is governed by the kinetics of in-situ polymerization and proceeds through two stages: an initial stage dominated by the increasing polymer concentration from polymerization, and a subsequent stage driven by polymer chain growth. Unexpectedly, longer polymer chains do not always enhance interparticle forces through bridging effect. Once chain length exceeds a critical threshold (~750 kDa), polymers adopt more contracted conformations, leading to self-shielding of potential adsorption sites for bridging contacts and increased particle separation distances, thereby diminishing attractive interparticle interactions. This result highlights a delicate balance between bridging-induced attraction and steric-induced repulsion in determining rheology of cement paste.
✓ 已验证
DOI
高影响因子
Stress Biology
·
2026
·Vol. 6
·期 1
·35
·
IF 6.4
Xie Yan,Zhao Min,Liu Xianan,Yan Junjie,Yang Wanyi,Chen Yiya,Yang Ming,Wang Xiaowei,Fu Shuai,Zhou Xueping
Cysteine palmitoylation (S-palmitoylation or S-acylation) is a reversible post-translational modification dynamically controlled by opposing enzymes: palmitoyl acyltransferases (PATs) and depalmitoylases. Despite its established roles in other systems, the mechanistic details of S-acylation in plants, particularly its spatiotemporal regulation during plant-virus interactions, remain poorly understood, largely due to the lack of validated enzyme–substrate pairs. Using the geminivirus tomato yellow leaf curl Chuxiong virus (TYLCCxV) as a model, we show that the viral effector C4 undergoes S-palmitoylation at Cys-4, a modification essential for its plasma membrane anchorage and subsequent mediation of viral pathogenesis. NbPAT4, a palmitoyl acyltransferase from Nicotiana benthamiana , catalyzes C4 S-palmitoylation, promoting its membrane localization, protein stability, and viral infection. Conversely, the C4S substitution (C4 C4S ) abolishes S-palmitoylation, leading to cytoplasmic redistribution, protein destabilization, and impaired viral pathogenicity. We further identify NbABHD6 as a depalmitoylase that interacts with C4 and catalyzes its S-depalmitoylation, triggering C4 degradation via the 26S proteasome pathway. This study reveals a regulatory axis in plant-geminivirus interactions, identifying NbPAT4 and NbABHD6 as antagonistic enzymes that dynamically regulate the stoichiometry of C4 S-acylation. These findings support a host–pathogen enzymatic tug-of-war model in which competitive S-palmitoylation homeostasis governs viral subcellular trafficking and pathogenicity.
✓ 已验证
DOI
PubMed
高影响因子
Food and Bioprocess Technology
·
2026
·Vol. 19
·期 6
·300
·
IF 5.6
He Tianwen,Jin Hongyang,Bai Jie,Wu Yuxuan,Niu Wenjing,Li Jiapeng,Sun Lijie,Wei Jinyang,Sun Changyan,Li Dehai
Anthocyanins (ACNs) are natural pigments with potent antioxidant activity, but their application in functional foods is restricted by their instability against heat and light. In this study, mung bean porous starch (PS) was prepared via ultrasound-assisted ethanol exchange at different ultrasonic powers and used as a wall material for ACN encapsulation, resulting in the formation of a PS@ACN composite system. The adsorption mechanism and stability enhancement were systematically investigated. The results showed that ultrasonic treatment significantly enhanced the adsorption capacity of PS, with the maximum loading capacity of 4.91 mg·g −1 obtained at 240 W. The suitability of the pseudo-first-order kinetic framework for describing the adsorption behavior suggested a predominantly physical adsorption pathway. Multiscale characterization showed that ultrasonic cavitation increased the specific surface area and pore volume at the macroscopic level. At the microscopic level, ultrasonic treatment disrupted the short-range ordered structure of starch and exposed more hydroxyl groups as potential binding sites. Molecular docking results suggested that hydrogen bonding was the primary driving force for the adsorption. Furthermore, the encapsulation significantly enhanced the stability of ACN, with the retention rate increasing with ultrasonic power. Under extreme thermal treatment (100 °C), the stability of PS@ACN was improved by at least 1.5 times compared to free ACN. In vitro digestion experiments further showed that PS-240@ACN offered superior gastrointestinal protection and intestinal-responsive release. This study suggests that ultrasound-modified PS, especially at 240 W, may serve as a promising protective carrier for ACN.
✓ 已验证
DOI
高影响因子
Mining Metallurgy & Exploration
·
2026
·
IF 2.5
Wang Guangdong,Bai Ziyang,Li Maohui,Mao Xishan,Yu Jie,Su Chang,Hu Wenwen,Ma Bo,Sun Wenzhou,Lu Youjun
In response to the limitations of the traditional acid leaching process in terms of environmental impact and safety, this study developed a ternary mixed acid system (hydrochloric acid - oxalic acid - citric acid) without the use of hydrofluoric acid and nitric acid. The influence of three process parameters, namely, the concentration of the mixed acids, the liquid-solid ratio, the acid leaching temperature, and the acid leaching time, on the removal efficiency of impurities such as Fe, Mn, Al, K, and Na in quartz sand was systematically investigated. The experimental results revealed that the optimal acid leaching conditions were a hydrochloric acid concentration of 4.5 mol·L − 1 , an oxalic acid concentration of 0.03 mol·L − 1 , a citric acid concentration of 0.04 mol·L − 1 , a liquid-solid ratio (mass ratio) of 5:1, a constant temperature of 60 ℃, and a holding time of 3 h. Under these conditions, the removal rates of Fe, Mn, and Al reached 89.2%, 71.0%, and 60.1%, respectively. Moreover, K and Na were also removed to a certain extent, with removal rates of 39.6% and 25.5%, respectively. Mechanistic analysis revealed that in the ternary mixed acid system, hydrochloric acid provides an acidic environment, and the combination of oxalic acid and citric acid synergistically promotes the dissolution of impurities through complexation, reducing impurities on the surface of quartz sand, improving the cleanliness, and forming micro-porous structures. Compared with the traditional hydrogen fluoride-nitric acid leaching process, the fluorine-free ternary mixed acid system proposed in this study has a similar or even better removal efficiency for impurities such as Fe and avoids the environmental and safety risks associated with hydrogen fluoride. This system can achieve the simultaneous removal of various impurities in quartz sand under normal pressure and medium-low-temperature conditions, providing a new technical path for the development of quartz sand purification technology for safety and environmental protection.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Sun Jingyi,Shao Xinyi,Fan Wei,Lei Borui,Wang Xiaonan,Gui Yang,Zhou Jingjing,Luo Yixin,Deng Tianqi,Wang Rui,Yang Deren,Xue Jingjing
The synthesis of high-quality single crystals is essential for revealing intrinsic structure-property relationships, as they provide an ideal model system free from grain boundaries and other extrinsic defects, enabling precise studies of electronic, optical, and charge-transport properties. In metal halide perovskites, an emerging family of semiconductors that have rapidly become a focal point of optoelectronic materials research, single crystal studies provide direct access to intrinsic processes such as defect formation, ion migration, and interfacial behavior. However, producing large, high-quality perovskite single crystals remains challenging because their multicomponent precursor solutions sustain dynamic solvation and coordination equilibria. The coexistence of fast ion dynamics and unstable coordination often drives uncontrolled multi-nucleation and disordered aggregation, making the nucleation stage a critical determinant of final crystal quality. Here, we introduce a general nucleation-control framework that regulates transient precursor species into mesoscale clusters via reversible, non-covalent interactions. Such weak and dynamic interactions provide soft confinement at the pre-nucleation stage, suppress random aggregation, promote selective nucleation, and permit ordered lattice formation without permanent additive incorporation. Implemented through a polymer-templated strategy, the approach enables the formation of centimetre-scale perovskite single crystals within hours and is broadly applicable across various perovskite compositions, demonstrating its universality.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Zhang Yunlong,Bing Qiming,Tu Yunchuan,Chen Shiming,Cui Xiaoju,Zan Lingxing,Li Mingrun,Hu Jingting,Yu Liang,Deng Dehui
Mild-condition methane (CH 4 ) oxidation into valuable chemicals using earth-abundant oxygen (O 2 ) is a highly desirable yet challenging process due to the chemical inertness of CH 4 and the low reactivity of O 2 . Herein, we report an ultrasound-catalysis coupling strategy for highly efficient conversion of CH 4 into high-value oxygenates under mild conditions, using O 2 as an oxidant and carbon nanotube-supported platinum nanoparticles (Pt/CNT) as a catalyst. It achieves a superior formation rate of 3727 μmol g cat. −1 h −1 and a selectivity of 92% for C 1-2 oxygenates at 5 o C and 0.1 MPa, significantly surpassing both previously reported thermo-catalytic and ultrasound-driven processes under low-temperature conditions. We find that ultrasound-driven surface cleaning effect enhances the exposure of active Pt sites, thereby facilitating the adsorption of CH 4 and O 2 . Furthermore, the localized and instantaneous high-temperature and high-pressure microenvironment generated by ultrasonic cavitation not only promotes the activation of CH 4 and O 2 for C−H cleavage and C−O coupling, but also accelerates the mass transfer of reactants and products.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Cao Peike,Liu Xuanchen,Liu Yanming,Zhao Zihao,Chen Shuo,Yu Hongtao,Chen Jingguang G.,Quan Xie
Electrocatalytic oxygen reduction reaction in seawater represents a sustainable approach for hydrogen peroxide (H 2 O 2 ) production, yet industrial-level current densities trigger severe cathodic alkalization and scaling issues, while aggressive acidification of the reaction system compromises catalytic efficiency. Here we show a cationic modification strategy that dynamically modulates the acidic electrified interface to promote both the formation and desorption of the key *OOH intermediate for H 2 O 2 synthesis. Enabled by this strategy, the cationic-modified catalysts achieve >90% efficiency at 500 mA cm -2 in natural seawater, and even reach 1.125 A cm -2 in high-salinity electrolytes, with a competitive estimated cost of $0.64 per kilogram of H 2 O 2 . Ab initio molecular dynamics simulations reveal that the introduced cationic modifications effectively counteract O–O bond cleavage induced by both the inherent strong binding of catalytic sites and the potential-induced over-binding effect under highly negative potentials, and thus facilitate *OOH desorption for H 2 O 2 formation. This work highlights dynamic interfacial intermediate stabilization as a strategy that complements conventional static binding-energy tuning, enabling high-current-density H 2 O 2 electrosynthesis in seawater.
✓ 已验证
DOI
PubMed
高影响因子
Advanced Fiber Materials
·
2026
·
IF 22.6
Cheng Ningbo,Li Junyu,Meng Na,Wang Chao,Fang Yuyan,Meng Xinyi,Zou Renhai,Wang Xianfeng,Wang Zhaohui,Yu Jianyong,Ding Bin
The growing global demand for energy for temperature regulation underscores the urgency of developing advanced personal thermal management textiles. However, current radiative cooling/heating materials often lack dynamic adaptability, efficient moisture management, diverse coloration, and satisfactory wearing comfort. Herein, we present colorful Janus metafabrics (CJMs) engineered via scalable solution-dyeing electrospinning, featuring a dual-gradient structure for radiative cooling and solar heating, and directional sweat transport. The metafabric consists of a hydrophobic carbon black/polyurethane (CB/PU) heating layer and a superhydrophilic aluminum oxide (Al 2 O 3 )/pigment-doped PU cooling layer. The cooling side exhibits approximately 95% MIR emittance, > 85% NIR reflectance, and 86% solar reflectance (yellow) due to synergistic Al 2 O 3 scattering and dyeing (67%–86%), compensating for the limitations of conventional dyes. The heating side achieves around 95% solar absorptance for efficient photothermal conversion. Outdoor tests demonstrate significant cooling Δ T = 17.6 °C and heating Δ T = 13.3 °C effects compared to bare simulated skin. Asymmetric wrinkles enhance optical properties and facilitate rapid directional moisture transport, with a one-way transfer index reaching 1163%. CJMs are ultralight, flexible (153%–175% strain), soft, and feature Janus textures, ensuring wearing comfort. This work provides a versatile design integrating energy efficiency, physiological comfort, and aesthetic diversity, offering a promising pathway toward next-generation smart textiles. Graphical
The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
高影响因子