CHINESE JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 4.6
Ye Cong-Yang,Feng Ze-Yu,Li Jia-He,Wang Di,Xu Xiang-Xiang,Xie Yi-Fan,Zhang Hong-Li,Zou Gang
The development of multi-mode and multi-level optical anti-counterfeiting systems holds tremendous significance for advanced information encryption and modern security. Herein, we developed a high-level information encryption platform based on a stimuli-responsive perovskite/polydiacetylene (PDA)/poly(vinyl alcohol) (PVA) composite hybrid film. By strategically integrating luminescent perovskite nanocrystals onto a twisted-stacking uniaxially oriented PDA/PVA heterostructure, three distinct optical dimensions, including pattern morphology, bright photoluminescence, and high-performance circularly polarized luminescence (CPL, with g lum up to 1.0), were successfully coupled into a single flexible platform. Crucially, the three diverse optical channels can be operated independently without mutual interference. By leveraging the fast halogen anion exchange of the perovskite layer and the thermochromic phase transition of the PDA layer as orthogonal cryptographic keys, precise and reversible modulation of each optical mode was achieved. This dual-stimulus response mechanism enables a dynamic, multistage decryption profile that successfully transitions from a predefined camouflage state to authentic target information. This programmable and flexible hybrid film provides an innovative crosstalk-free paradigm for next-generation anti-counterfeiting and hierarchical information encryption.
✓ 已验证
产品关联
DOI
高影响因子
Science China-Chemistry
·
2026
·
IF 9.8
Qian Bo,Xu Lin,Zhao Zhechen,Wang Yihan,Wang Zijin,Wu Zekai,Sun Wei,You Zhengwei
Dynamic covalent crosslinked polymer networks offer attractive reprocessability, but their practical implementation is often limited by the requirement for continuous thermal activation during processing and solvent-assisted preparation. Here, we report a solvent-free scalable strategy for preparing dynamic crosslinked polyurethanes (CDAPUs) based on Diels-Alder chemistry by regulating the dispersion of powdery dynamic components in polyol media. The resulting materials exhibit strong adhesion to diverse substrates and maintain reliable bonding under harsh thermal conditions, achieving a maximum bonding strength of 17.17 MPa and nearly unchanged adhesion strength after ten bonding–debonding cycles. More importantly, we identify a dissociation–reconstruction window in the dynamic network and use it to enable post-activation processing and high-strength bonding, achieving an adhesion strength of 10.18 MPa, corresponding to over 90% retention relative to its high-temperature bonding. This work establishes a scalable and solvent-free manufacturing strategy for dynamic crosslinked polyurethane adhesives. It offers a practical route toward low-thermal-load assembly, repairable bonding, and sustainable adhesive technologies.
✓ 已验证
产品关联
DOI
高影响因子
Biomass Conversion and Biorefinery
·
2023
·
IF 4
Zhang Shuaijie,Lu Zhichao,Li Yaxuan,Qiu Zihan,Bai Yuanjuan,Liu Gonggang,Xu Laiqiang,Liao Yuanyuan,Chang Shanshan,Hu Jinbo
Constructing electrode materials with great ion transfer ability, highly porous, and good electrical conductivity is of significance for realizing high-performance electrochemical double-layer capacitors. Here, the N-PC (N-doped porous carbon)/HWCF (hollow wooden carbon fiber) composites that have all the features were synthesized, which was obtained from carbonization of the mixture of hollow wood fiber (HWF)/ZIF-8 and pore-forming substances. It was found that ZIF-8 nanoparticles are closely packed forming a uniform ZIF layer fully covering the external surface of WF by the electrostatic interaction. They were converted into the inter-connect N-PC network anchoring on the HWF surface after calcination, which provided a continuous conductive network for electrons. The resulting N-PC/HWCF-based electrodes exhibited impressive electrochemical performance. The specific capacitance of N-PC/HWCF-800 is 121 F/g at a current density of 0.5 A/g with excellent cycling stability over 10000 cycles. Furthermore, the symmetrical supercapacitors (SSCs) with two N-PC/HWCF-800 electrodes delivered an encouraging energy density of 4.8 Wh kg −1 when the power density is as high as 3600 W/kg. This study provides insights for the design of hierarchical porous carbon structure towards next-generation high-power smart devices.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2023
·Vol. 30
·期 11
·1-10
·
IF 2.8
Zhu Rongli,Pu Zejun,Peng Qiuxia,Wang Xu,Wu Fang,Zheng Pan,Yu Dayang,Chen Keli,Ni Wenlong,Zhong Jiachun
In this study, the semi-aromatic poly (decamethylene terephthalamide) acid (PA10T) and an array of PA10T/1010 with various copolymerization content of the third monomer 1,10-decanedioic acid (DCA) were synthesized using a productive one-step melt polycondensation method. Importantly, the addition of DCA’s effect for PA10T on crystallization behaviors, thermal properties, and mechanical performances were extensively investigated. Additionally, the results of DSC demonstrate that all the melting temperature of PA10T/1010 copolyamides are significantly lower than PA10T by introducing the third monomer DCA, and the heat stability has been not significantly affected according to the results of TGA, suggesting the improvement of processing properties. Besides, compared with PA10T, the bending modulus, breaking elongation, tensile strength, and izod impact strength of PA10T/1010-1 all increase obviously, when the feed ratio of DCA and terephthalic acid (PTA) is 10:90. Thus, introducing bio-based DCA for copolymerization is a promising method to enhance both the processing and mechanical properties of PA10T.
✓ 已验证
产品关联
DOI
高影响因子
Nano-Micro Letters
·
2023
·Vol. 16
·期 1
·1-21
·
IF 26.6
Zhao Tianbao,Jia Zirui,Liu Jinkun,Zhang Yan,Wu Guanglei,Yin Pengfei
Electromagnetic wave (EMW) absorbing materials have an irreplaceable position in the field of military stealth as well as in the field of electromagnetic pollution control. And in order to cope with the complex electromagnetic environment, the design of multifunctional and multiband high efficiency EMW absorbers remains a tremendous challenge. In this work, we designed a three-dimensional porous structure via the salt melt synthesis strategy to optimize the impedance matching of the absorber. Also, through interfacial engineering, a molybdenum carbide transition layer was introduced between the molybdenum selenide nanoparticles and the three-dimensional porous carbon matrix to improve the absorption behavior of the absorber. The analysis indicates that the number and components of the heterogeneous interfaces have a significant impact on the EMW absorption performance of the absorber due to mechanisms such as interfacial polarization and conduction loss introduced by interfacial engineering. Wherein, the prepared MoSe 2 /MoC/PNC composites showed excellent EMW absorption performance in C , X , and K u bands, especially exhibiting a reflection loss of − 59.09 dB and an effective absorption bandwidth of 6.96 GHz at 1.9 mm. The coordination between structure and components endows the absorber with strong absorption, broad bandwidth, thin thickness, and multi-frequency absorption characteristics. Remarkably, it can effectively reinforce the marine anticorrosion property of the epoxy resin coating on Q235 steel substrate. This study contributes to a deeper understanding of the relationship between interfacial engineering and the performance of EMW absorbers, and provides a reference for the design of multifunctional, multiband EMW absorption materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·Vol. 30
·期 56
·118964-118975
·
IF 5.8
Zhang Furong,Chen Hui,Liu Yuxuan,Wang Mingxin
The ability of microplastics (MPs) to adsorb environmental pollutants has been extensively studied. However, little is known about the ability of MPs to release inherent additives and the interaction between them. This paper explored the effects of environmental factors on the release of phthalic acid esters (PAEs) from three different types of microplastics (polyethylene microplastics (PE-MPs), polypropylene microplastics (PP-MPs), and polystyrene microplastics (PS-MPs)) by simulating water environments, as well as the differences in the adsorption of one or more PAEs by MPs. The results showed that the types of MPs, single environmental factors, and combined environmental factors had a great influence on the release of di(2-ethylhexyl) phthalate (DEHP). In the influence of a single environmental factor, the releasing amount of DEHP increased significantly. When the pH value increased from 5 to 9, the release of three PAEs from all MPs decreased. Moreover, under the combined influence of three environmental factors, the DEHP release from PP-MPs was most affected by environmental factors, and the order of influence of the three environmental factors was ionic strength > organic matter > pH. The DEHP release of PS-MPs was the highest (0.058 ± 0.023 μg/L), followed by PP-MPs (0.038 ± 0.010 μg/L) and PE-MPs (0.035 ± 0.008 μg/L). Adsorption kinetics and isotherm fitting showed that the adsorption process of the three MPs was suitable for the pseudo-second-order kinetic model, and the Freundlich adsorption isotherm had a higher fitting degree. Compared with single adsorption, the competitive adsorption of three PAEs increased the adsorption capacity of DEHP and decreased the adsorption capacity of dibutyl phthalate (DBP) and diisobutyl phthalate (DIBP). These findings help predict the potential of MPs to release toxic additives under different environmental conditions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Drug Delivery and Translational Research
·
2023
·
IF 5.4
Tao Wanjun,Xie Pei,Huang Chengyuan,Wang Ying,Huang Yu,Yin Zongning
In an effort to overcome the nasal mucus barrier and epithelial barrier, as well as reduce entry into the bloodstream, we designed RWrNM and DLPC-modified PLGA nanoparticles (PDR-NPs). These nanoparticles were further encapsulated with dexamethasone acetate (Dexac) to form Dexac/PDR-NPs. Transmission electron microscopy (TEM) analysis revealed their spherical shape with an outer lipid layer. Dynamic light scattering (DLS) determined their particle size to be 125.77 ± 2.01 nm, with a polydispersity index (PDI) of 0.139 ± 0.029. The experimental results demonstrate that DLPC-modified PLGA nanoparticles can effectively reduce interactions with mucin at different concentrations, decrease aggregation, and facilitate their crossing of the mucus barrier. Additionally, results from the cellular uptake assay revealed a significantly greater uptake of PDR-NPs by inflammatory RAW 264.7 cells (2.99-fold higher than that of free C6, p < 0.0001) and inflammatory HUVECs (7.20-fold higher than that of free C6, p < 0.0001). Furthermore, Dexac/PDR-NPs effectively reduced the levels of inflammatory factors nitric oxide (NO) ( p < 0.001) and interleukin-6 (IL-6) ( p < 0.05) in the supernatant of inflammatory RAW 264.7 cells. Intravital imaging of rats revealed that PDR-NPs had a longer residence time in inflamed nasal tissue compared to PD-NPs. Furthermore, in vivo pharmacodynamic experiments showed that Dexac/PDR-NPs effectively reduced the symptoms of nasal inflammation, lowered the pH of nasal secretions, decreased serum inflammatory factor levels (TNF-α and IL-6), and reduced nasal mucosal inflammatory factor levels (IL-1β), while also reducing the degree of inflammation in the nasal mucosa. Both cytotoxicity assays and in vivo results indicate that PDR-NPs have a good safety profile. PDR-NPs not only overcome the nasal mucus barrier but also reduce the systemic toxicities associated with drug entry into the circulation by enhancing the targeting of inflammatory macrophages and inflammatory vascular endothelial cells. PDR-NPs allow for an “open sources and cut costs” treatment strategy to increase drug retention in the inflamed nasal tissues, reducing toxicity and increasing efficacy. In conclusion, PDR-NPs can be a promising drug delivery system for the local treatment of acute rhinosinusitis. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2023
·Vol. 14
·期 1
·1-11
·
IF 16.6
Bai Ningning,Xue Yiheng,Chen Shuiqing,Shi Lin,Shi Junli,Zhang Yuan,Hou Xingyu,Cheng Yu,Huang Kaixi,Wang Weidong,Zhang Jin,Liu Yuan,Guo Chuan Fei
Humans can gently slide a finger on the surface of an object and identify it by capturing both static pressure and high-frequency vibrations. Although modern robots integrated with flexible sensors can precisely detect pressure, shear force, and strain, they still perform insufficiently or require multi-sensors to respond to both static and high-frequency physical stimuli during the interaction. Here, we report a real-time artificial sensory system for high-accuracy texture recognition based on a single iontronic slip-sensor, and propose a criterion—spatiotemporal resolution, to corelate the sensing performance with recognition capability. The sensor can respond to both static and dynamic stimuli (0-400 Hz) with a high spatial resolution of 15 μm in spacing and 6 μm in height, together with a high-frequency resolution of 0.02 Hz at 400 Hz, enabling high-precision discrimination of fine surface features. The sensory system integrated on a prosthetic fingertip can identify 20 different commercial textiles with a 100.0% accuracy at a fixed sliding rate and a 98.9% accuracy at random sliding rates. The sensory system is expected to help achieve subtle tactile sensation for robotics and prosthetics, and further be applied to haptic-based virtual reality and beyond.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
·
2023
·Vol. 38
·期 5
·1025-1033
·
IF 1.6
Li Meijuan,Wang Chuanyi,Wang Gaoqiang,Wang Chuanbin,Shen Qiang
AlN ceramics were prepared by plasma activation sintering (PAS) with compound additives yttrium acetylacetonate (Y(acac) 3 ) and melamine (C 3 H 6 N 6 ). The effects of compound additives on the microstructure, density, and thermal properties of AlN ceramic were studied. Y(acac) 3 and C 3 H 6 N 6 can form Y 2 O 3 , residual organic carbon and reducing gas during the heating process, which improves the AlN sintering performance at a temperature of 1 700 °C and the bulk thermal conductivity. When the content of Y(acac) 3 is 10 wt% and C 3 H 6 N 6 is 3 wt%, the thermal conductivity of AlN ceramics is 105.6 W/(m·K), which is much higher than that of AlN ceramics with Y 2 O 3 under the same sintering conditions. This work provides theoretical reference for the preparation of high-performance AlN ceramic.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
·
2023
·Vol. 38
·期 5
·1205-1212
·
IF 1.6
Zhang Huan,Zhao Qinghua,Zhong Yaping,Cai Ruiyan,Liu Ke,Wang Dong,Lu Zhentan
The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate (PET). We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination reaction by melt coextrusion. Beside evenly mixing of poly(hexamethylene guanidine) (PHMG) and PET in the melt coextrusion procedure, the amination reaction also occurred between PHMG and PET under high temperature (230–270 °C). The antibacterial ability of composite PET showed obvious PHMG concentration dependence, and antibacterial activity reached more than 99% when PHMG content was 2.5 wt%. Moreover, LIVE/DEAD fluorescence test further confirmed that the composite PET could kill bacteria quickly and effectively (within 30 min); while negligible cytotoxicity was observed to HSF and HUVEC cells. One-step eco-friendly fabrication of composite antibacterial PET was accomplished by on-line melt coextrusion. The composite antibacterial PET has potential use in multiple fields to combat with pathogenic including textiles, packaging materials, decoration materials and biomedical devices, etc.
✓ 已验证
产品关联
DOI
高影响因子
NATURE METHODS
·
2023
·
IF 48
Zhang Yun,Yi Yakun,Li Ziyi,Zhou Ke,Liu Lei,Wu Hai-Chen
Direct protein sequencing technologies with improved sensitivity and throughput are still needed. Here, we propose an alternative method for peptide sequencing based on enzymatic cleavage and host–guest interaction-assisted nanopore sensing. We serendipitously discovered that the identity of any proteinogenic amino acid in a particular position of a phenylalanine-containing peptide could be determined via current blockage during translocation of the peptide through α-hemolysin nanopores in the presence of cucurbit[7]uril. Building upon this, we further present a proof-of-concept demonstration of peptide sequencing by sequentially cleaving off amino acids from C terminus of a peptide with carboxypeptidases, and then determining their identities and sequence with a peptide probe in nanopore. With future optimization, our results point to a different way of nanopore-based protein sequencing.
✓ 已验证
DOI
PubMed
高影响因子
CELLULOSE
·
2023
·
IF 5.7
Chen Xinyue,Yang Mingyan,Cai Xiaodan,An Linyu,Lai Kunrong,Dou Yan
Cellulose nanofibril (CNF) composite aerogels have been the focus of studies in organic solvent absorption and oil removal fields due to their low density, high absorption capacity, nontoxicity, and biodegradable properties. However, the complicated pretreatment process and increasing environmental concerns restrict the large-scale application of CNF-based materials. Herein, hydrophobic lignin containing nanofibril (LCNF)/poly (vinyl alcohol) (PVA) aerogels (LPAs) were prepared through freeze-drying and thermal chemical vapor deposition (CVD) of methyl trichlorosilane (MTMS). The Fourier Transform Infrared Spectroscopy (FT-IR) result showed that the hydrophobic siloxane coating was successfully prepared on the LPA scaffold. The Field Emission Scanning Electron Microscope (FE-SEM) result showed that the modified LPAs (M-LPAs) exhibited three-dimensional interpenetrating network structure. The aerogel presented outstanding physical properties including low density of 12.95 ± 0.40 mg/cm 3 , high porosity of 98.99%, high flexibility, and enhanced compressibility due to its homogenous porous structure. The wettability test revealed that the aerogel, with a water contact angle (WCA) up to 146 ± 2°, was highly hydrophobic. The M-LPAs exhibited absorption capacity for various oils and organic solvents and the maximal absorption capacity of M-LPA-0.25 for chloroform could reach 106.80 ± 4.97 g/g aerogel. In addition, M-LPA-0.25 was capable of separating emulsified water/oil mixtures, which extends its potential application. Notably, the aerogel demonstrated good reusability because it still maintained more than 61% of its original absorption capacity after 10 extrusion cycles. The facile technique for the preparation of LCNFs from low-cost lignocellulosic biomass without a chemical bleaching process is green, sustainable. Thus it can be used to fabricate high-efficiency LCNF-based absorbents from agricultural waste for the removal of the oil and industrial organic solvent spills.
✓ 已验证
产品关联
DOI
高影响因子