CHROMATOGRAPHIA
·
2020
·Vol. 83
·期 4
·541-548
·
IF 1.596
Yu Kaili,Yue Mei-E,Xu Jie,Jiang Ting-Fu
A capillary electrophoresis (CE) method was developed for the screening of 5′-methylthioadenosine nucleosidase (MTAN) inhibitors in traditional Chinese drugs and small molecular compounds. In this method, reaction occurred at the capillary inlet during a predetermined waiting period, followed by electrophoretic separation of the reaction substrates and products. Parameters affecting separation efficiency and enzyme activity were evaluated systematically. The optimized conditions were as follows: 30 mM phosphate (pH 3.0) running buffer, 25 kV applied voltage, 20 mM HEPES (pH 6.0) reaction buffer, and 4 min incubation time. Under the optimized conditions, the Michaelis–Menten constant ( K m ) of MTAN was 3.44 μM, which agreed with the documented data. The proposed method was successfully applied for MTAN inhibitor screening from 21 natural extracts and 8 small molecular compounds. The results demonstrated the practical applicability of the at-inlet reaction-based CE method in screening of MTAN inhibitors from natural products and small molecular compounds.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS LETTERS
·
2020
·Vol. 150
·期 9
·2497-2509
·
IF 2.482
Yang Qiang,Liu Jiali,Yan Dejian,Liu Jikai,Luo He’an
Abstract Boron-rich alloy boron suboxide (B 6 O) as a novel metal-free photocatalyst was recently explored for photocatalytic CO 2 reduction and water splitting. However, to broaden the potential applications of B 6 O in the field, further improving its activity and understanding its fundamental chemical properties are essential. Herein, transition metal doping (Cr or Co) is designed to engineer the band structure of B 6 O via a solid state reaction. The valence band edge of Cr or Co doped B 6 O is proposed to be more positive than that of pristine B 6 O while the original conduction band of B 6 O is not much influenced by doping, contributing to the better light harvesting ability and lower charge recombination rate of doped B 6 O. The photocatalytic and photoelectrochemical (PEC) performances of doped B 6 O were therefore remarkably enhanced. The apparent quantum yields (AQY) of 20 wt% Cr or Co doped B 6 O are much higher than that of pristine B 6 O. In addition, the 20 wt% Cr doped B 6 O exhibits the best electrical conductivity and photocatalytic performance compared with the Co doped B 6 O and pristine B 6 O. The present work demonstrates a facile and effective strategy to engineer the band structure and reduce the charge migration resistance of B 6 O. Graphic Abstract
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2020
·Vol. 187
·期 3
·1-10
·
IF 6.232
Guo Rui,Wang Dan-Ni,Wei Yun-Yun,Zhang Ying-Zhi,Yang Chun-Guang,Xu Zhang-Run
A controllable approach for preparing a portable colloidal photonic crystal (CPC) array chip is presented. The approach was inspired by the confinement effect of nanoparticle self-assembly on patterned surface. Hydrophobic polydimethylsiloxane substrate with reproducible micro-region array was fabricated by soft-lithography. The substrate was employed as the patterned template for self-assembly of monodisperse polystyrene nanoparticles. The CPC units can be prepared in several minutes, and exhibit consistent reflection wavelength. By adjusting the size of polystyrene nanoparticles and the shape of micro-regions, CPC units with multiple structure, colors and geometries were obtained. The CPC array chip features fluorescence enhancement owing to the optical modulation capability of the periodic nanostructure of the self-assembled CPC. With the reflection wavelength (523 nm) of green CPC units overlapping the emission wavelength (520 nm, with excitation wavelength of 490 nm) of 6-carboxyfluorescein-labeled DNA probe, the fluorescence intensity increased more than 10-fold. For signal-amplified assay of adenosine, the concentration range of linear response was 5.0 × 10 −5 mol L −1 to 1.0 × 10 −3 mol L −1 , and the limit of detection was 1.3 × 10 −6 mol L −1 . Because of the enhancement effect of photonic crystal, the fluorescence images were more readable from the CPC array chip, compared with those from the planar substrate. The chip has potential applications in multiplex determination with high-throughput via encoding strategy based on the tunable structure, color or geometric shape.
Schematic diagram of signal-enhanced fluorescent detection of adenosine based on the colloidal photonic crystal array chip (PDMS, polydimethylsiloxane; PS NPs, polystyrene nanoparticles; CPC, colloidal photonic crystal; GO, graphene oxide; FAM, 6-carboxyfluorescein).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2020
·Vol. 11
·期 1
·1-11
·
IF 12.121
Cao Wenbo,Cheng Simin,Yang Jing,Feng Jiaxin,Zhang Wenpeng,Li Zishuai,Chen Qinhua,Xia Yu,Ouyang Zheng,Ma Xiaoxiao
Lipids play a pivotal role in biological processes and lipid analysis by mass spectrometry (MS) has significantly advanced lipidomic studies. While the structure specificity of lipid analysis proves to be critical for studying the biological functions of lipids, current mainstream methods for large-scale lipid analysis can only identify the lipid classes and fatty acyl chains, leaving the C=C location and sn -position unidentified. In this study, combining photochemistry and tandem MS we develop a simple but effective workflow to enable large-scale and near-complete lipid structure characterization with a powerful capability of identifying C=C location(s) and sn -position(s) simultaneously. Quantitation of lipid structure isomers at multiple levels of specificity is achieved and different subtypes of human breast cancer cells are successfully discriminated. Remarkably, human lung cancer tissues can only be distinguished from adjacent normal tissues using quantitative results of both lipid C=C location and sn -position isomers.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2020
·Vol. 187
·期 2
·1-11
·
IF 6.232
Su Li,Cai Yexi,Wang Liang,Dong Wenpei,Mao Guojiang,Li Ye,Zhao Mingsheng,Ma Yanhua,Zhang Hua
The multifunctional hemin@carbon dot hybrid nanozymes (hemin@CD) with simultaneous peroxidase-like activity and fluorescence signalling property was prepared for the first time. Based on these properties, hemin@CD was applied to develop a dual-channel fluorescent probe for H 2 O 2 and H 2 O 2 -based biocatalytic systems. By virtue of the peroxidase-like activity, hemin@CD can catalyze the oxidative coupling of 4-aminoantipyrine with phenol in the presence of H 2 O 2 to form a pink-red quinoneimine dye with a maximum absorbance at 505 nm. Under the excitation wavelength of 480 nm, the green fluorescence of hemin@CD peaks at 540 nm and is quenched by the generated quinoneimine dye due to an inner filter effect, and also by H 2 O 2 because of dynamic quenching. Thus, a colorimetric and fluorimetric dual-channel optical probe for H 2 O 2 is obtained. Due to the glucose/xanthine transformations under formation of H 2 O 2 by the relevant oxidase catalysis, the probe can be applied for detection of glucose and xanthine. The colorimetric detection limits for H 2 O 2 , glucose and xanthine are 0.11, 0.15, 0.11 μM, and the and fluorimetric detection limits are 0.15, 0.15, 0.12 μM, respectively.
Schematic representation of the colorimetric and fluorimetric dual probe for H 2 O 2 , glucose and xanthine based on the multifunctional emin@carbon dot) hybrid nanozymes with simultaneous peroxidase-like activity and fluorescence signalling property.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
IONICS
·
2020
·Vol. 26
·期 7
·3281-3288
·
IF 2.394
Yang He,Chang Limin,Wang Limin,Yin Dongming,Wang Duo,Cheng Yong
The advanced electrode construction consisting of Ni foam uniformly covered by layered ZnO microspheres (ZnO@Ni LMs) is successfully assembled by a simple thermal treatment process followed by a mild annealing treatment, which can be directly used as a binder-free electrode for lithium-ion batteries (LIBs). The as-synthesized ZnO@Ni LMs consist of numerous nanoparticles, leaving abundant porous to mitigate the volume changes between charge-discharge process. Remarkably, binder-free electrode circumvents the addition of insulating material (binder) and inhomogeneous distribution of conductive carbon material on current collector. When evaluated as binder-free electrode for LIBs, ZnO@Ni LMs deliver a superior specific capacity (1144 mA h g −1 at 100 mA g −1 ), brilliant rate capability, and excellent cycling ability (565 mA h g −1 at 100 mA g −1 after 100 cycles).
✓ 已验证
产品关联
DOI
高影响因子
COLLOID AND POLYMER SCIENCE
·
2020
·Vol. 298
·期 3
·233-241
·
IF 1.536
Xue Min,Chen Ming,Chang Wenhao,Chen Ruiyang,Li Pengna
We have presented a simple method for situ fabrication of photoluminescent lanthanide metallogels. A series of lanthanide metallogels could be rapidly formed through mixing the aqueous solution of Tb 3+ or Eu 3+ and organic solution of synthesized aromatic carboxylic ligands ( DCn , n = 14, 16,18) at room temperature. The gelation tests revealed that the ligand with longer alkyl chain ( DC18 ) showed stronger gelling abilities, indicating that the structure of non-coordinated groups in ligand molecules could affect self-assembly processes and, hence, the microstructures and properties of lanthanide metallogels. FT-IR measurements demonstrated that the driving force of formation of the metallogels was the coordination interaction between DCn and Tb 3+ or Eu 3+ . XRD analysis revealed that DC14 metallogels took a mixture of hexagonal and tetragonal packing modes. All obtained metallogels have shown typical luminescent emissions of the lanthanide complex. In particular, DC18 /Tb(NO 3 ) 3 metallogel in DMF/H 2 O ( v : v = 1:1) has shown excellent self-supporting, self-healing, film-forming, and rheological properties.
The Tb 3+ /Eu 3+ metallogels have been formed with aromatic carboxylic acids as ligands, and they have shown excellent luminescent, self-healing, film-forming, and rheological properties.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2020
·Vol. 187
·期 2
·1-9
·
IF 6.232
Sun Huiyuan,Liu Xueliang,Wang Xinhuan,Han Qiusen,Qi Cui,Li Yanmei,Wang Chen,Chen Yongxiang,Yang Rong
The authors describe a peroxidase-mimicking nanozyme composed of IrO 2 and graphene oxide (GO). It was synthesized from monodisperse IrO 2 nanoparticles with an average diameter of 1.7 ± 0.3 nm that were prepared by pulsed laser ablation in ethanol. The nanoparticles were then placed on polyallylamine-modified GO nanosheets through electrostatic interaction. The peroxidase-like activity of the resulting nanocomposites was evaluated by catalytic oxidation of 3,3′,5,5′-tetramethylbenzidine in the presence of H 2 O 2 . Kinetic results demonstrated that the catalytic behavior of the nanocomposites follows Michaelis-Menten kinetics. Experiments performed with terephthalic acid and cytochrome C confirmed that the peroxidase-like activity originated from the electron transfer mechanism rather than from generation of hydroxy radicals. The peroxidase-like activity is inhibited in the presence of ascorbic acid (AA). Based on this property, a colorimetric assay was developed for the determination of AA by exploiting the peroxidase-like activity of IrO 2 /GO nanocomposites. The linear relationship between absorbance at 652 nm and the concentration of AA was acquired. The limit of detection for AA is 324 nM. Further applications of the method for AA detection in real samples were also successfully demonstrated.
Schematic of the preparation of polyallylamine (PAH)-stabilized IrO 2 /GO nanocomposites and the colorimetric detection of AA based on the peroxidase-like activity of IrO 2 /GO nanocomposites.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Inorganic and Organometallic Polymers and Materials
·
2020
·Vol. 30
·期 11
·4350-4360
·
IF 1.941
Zhang Zhihua,Peng Xinke,Zhang Zhongping,Xiao Weiming,Deng Shengjun,Mao Xuejin,Hong Sanguo,Chen Chao,Zhang Ning
Metal–organic framework (MOF) supported nanocatalysts are attracting great attentions in heterogeneous catalysis. However, they are still less explored and poorly understood in catalyzing solid–gas reactions. In current work, two MOF supported Pt nanocatalysts were prepared by immersion method coupled with the most commonly used NaBH 4 (Pt/UiO-66-NaBH 4 ) and H 2 (Pt/UiO-66-H 2 ) reduction, and their catalytic CO oxidation performances were investigated. NaBH 4 and H 2 reduction both provide highly dispersed Pt/UiO-66 nanocatalysts, and the two prepared catalysts display excellent CO oxidation activities. Moreover, CO oxidation durability tests reveal that Pt/UiO-66-NaBH 4 shows superior durability and structure stability, which are much better than those of Pt/UiO-66-H 2 . The high structure stability of Pt/UiO-66-NaBH 4 also endows it with good H 2 O and CO 2 tolerance. This work attempts to elucidate the influence of reduction methods on the structures and catalytic CO oxidation performances of Pt/UiO-66 catalysts by employing XRD, TEM, N 2 -sorption, XPS and in situ DRIFTS techniques. Furthermore, the mechanism of CO oxidation was studied by in situ DRIFTS, and the result reveals that the CO oxidation on the two catalysts follows different mechanism.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMERS AND THE ENVIRONMENT
·
2020
·Vol. 28
·期 8
·2199-2210
·
IF 2.572
Pei Ruihan,Li Qiqi,Liu Jianting,Yang Guifang,Wu Qiong,Wu Minya,Tong Shengxuan,Lv Yuancai,Ye Xiaoxia,Liu Yifan,Liu Minghua
Abstract Removal of low content of Cr(VI) from water is a critical challenge for water environment protection. Herein, an acrylamide-thiosemicarbazide cellulose aerogels (ATC) was designed by dissolving, grafting and freeze-drying to introduce thiosemicarbazide onto acrylamide-cellulose aerogels (AMC) via Schiff based reaction. The resultant ATC was further employed as an efficient adsorbent to remove low content of Cr(VI) from wastewater by adsorption and reduction. The SEM, FT-IR, and BET results showed that the ATC was composed of well-developed pore structure and owned functional groups such as –NH 2 , C–S and C=S groups. Experimental results indicated that ATC exhibited excellent removal efficiency for 99% under low initial concentration (0.1–10 mg/L). The adsorption isotherms demonstrated ATC adsorbent according to a monolayer adsorption behavior following the Langmuir model with a calculated maximum adsorption capacity of 83.40 mg/g at pH 3, and the adsorption kinetics well obeyed the pseudo-first-order kinetic model. Importantly, the maximum effluent concentration of Cr(VI) was lower than 0.045 mg/L, meeting the standard of WHO (50 μg/L). Furthermore, the main removal mechanisms involved the synergistic effect of electrostatic interactions, reduction and chelation between the positively charged functional groups of adsorbent and the anionic Cr(VI) ions. Graphic Abstract
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2020
·Vol. 27
·期 11
·6217-6233
·
IF 4.21
Jiang Shuai,Zhang Meiling,Li Mengmeng,Liu Liu,Liu Lifang,Yu Jianyong
Abstract Herein, a facile method on fabricating aerogels with hierarchical porous structures was created by freeze-drying the cellulose nanofibril (CNF)/methyltrimethoxysilan (MTMS)/fumed silica (FS) suspension. FS was introduced for its porous structure, which could improve the thermal insulation performance of freeze-dried aerogels. The as-prepared aerogels were hydrophobic with improved mechanical properties (elastic recovery rate was up to 99.7%) and reduced thermal conductivity (0.027 Wm −1 K −1 at 25 °C). Most importantly, the addition of FS was proved to improve the thermal insulation stability of cellulose aerogels efficiently in different values of relative humidity (RH) and temperatures. The thermal conductivity of pure CNF aerogel conditioned at 25 °C and 95% RH was 196% higher than that of the fully-dried one, while the increase was 56% for the composite aerogel. Besides, at 30% RH, the thermal conductivity increased by 24% for the pure CNF aerogel when tested from 20 to 60 °C while only a 2% increase for the composite aerogel. Moreover, when tert-butanol was used as the solvent to optimize the distribution of the pores of freeze-dried aerogels, their thermal insulation performance was further improved. Our work provides easily available CNF/MTMS/FS ternary aerogels, which are stable in thermal conductivity in the changing environment. Graphic abstract
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2020
·Vol. 31
·期 13
·10437-10445
·
IF 2.22
Gao Zhenguo,Zhang Jiaoqiang,Li Ke,Lan Di,Zhao Zehao,Kou Kaichang
In this research, the electrochemical behavior of poly(2-acryloyloxyethyl ferrocenecarboxylate) (PAEFc) synthesized via an atom transfer radical polymerization (ATRP) strategy was investigated in a series of tetrabutylammonium perchlorate (TBAP)/acetonitrile vs. Ag/AgNO 3 system. In comparison, series of PAEFc electrolyte with specific molecular weight and depositing concentration were analyzed via cyclic voltammetry (CV) method. Furthermore, chronocoulometry (CC) technology has been employed on the dynamic electron/mass transfer mechanism and the determination of kinetic parameters (diffusion coefficients, reaction rate constant, etc.). Finally, it is demonstrated that anodic and cathodic process of PAEFc was controlled by diffusion and adsorption–diffusion, respectively. Meanwhile, the kinetic parameters of the typical quasi-reversible redox process were obtained, of which the apparent activation energy ( E a ) and pre-exponential factor ( A ) were 121.38 kJ mol −1 4.28 × 10 18 s −1 , respectively.
✓ 已验证
产品关联
DOI
高影响因子