文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3145至3156个,产品总数6,840个

切换升序
CO2
Molecular Catalysis · 2025 · IF 4.9

Unravelling the role of Y in Cu/ZnO/ZrO2 catalysts for CO2 hydrogenation to methanol

Hao Huang,Wei Na,Xiangying Wang,Zhenhui Huang,Zhao Ai,Wengui Gao,Hua Wang

A detailed understanding of the role of Y in Cu/ZnO/ZrO 2 catalysts for methanol synthesis was studied by XRD, HRTEM, TPR, TPD, N 2 O titration and XPS techniques in this work. The addition of Y enhances the interaction between Cu and ZnO. With the increase of Y content, the crystal size of Cu and ZnO decreased and Cu 0 surface area increased, CO 2 /H 2 -TPD exhibited the larger CO 2 and H 2 desorption peak at relative high temperature, XPS confirmed the reduction degree of ZnO to Zn 0 on the catalyst surface also increased, and forming more Cu-ZnO x active sites. However, excess Y content leads to a much stronger interaction between Cu and ZnO, which is not beneficial for migration and stabilization of the formed ZnO x species during the reaction atmosphere, and thus generating less Cu-ZnO x sites for methanol synthesis. This work enlightens the migratable and metastabe of the formed ZnO x species on Cu surface by regulation of promoter and offers a perspective for exploring Cu-ZnO interactions in modified Cu/ZnO/ZrO 2 catalysts.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Molecular Catalysis · 2025 · IF 4.9

Refining the surface O defect via Cu on WO3 hollow sphere for photocatalytic CO2 reduction

Jilong Xiao,Yuxiang Li,Yuzhou Xia,Tuanyu Guo,Lu Chen,Shuying Zhu

Photocatalytic CO 2 reduction is a promising strategy for achieving carbon neutrality. Nevertheless, its efficiency is limited by the high energy barrier and severe charge recombination. Herein, Cu–WO 3 hollow sphere hybrids, in which Cu is anchored to the O defects of WO 3 , were fabricated to enable efficient photocatalytic conversion of CO 2 to CO. The oxygen defects in WO 3 promote the preferential deposition of Cu, resulting in the simultaneous exposure of Cu–O defect active sites. In the engineered Cu–WO 3 structure, the confined hollow morphology improves CO 2 adsorption and facilitates the separation of photogenerated electrons and holes. The Cu–O defect centers effectively reduce the overpotential for CO 2 conversion. Consequently, the synthesized Cu–WO 3 catalyst demonstrates excellent and stable photocatalytic CO 2 reduction activity, achieving a CO production rate of 1518 μL g –1 h –1 in the absence of a sacrificial agent, which is 5.2 times greater than that of pristine WO 3 . This study provides new insights into defect modulation for designing highly efficient photocatalytic materials.

CAS / MDL: 13283-01-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2025 · IF 8.3

Solution combustion synthesis of Ni-based catalyst over porous CaCO3 for plasma-catalytic CO2 methanation

Shiji Qin,Guangya Wei,Qiuman Zhang,Bowen Liu,Haibao Zhang,Zhongwei Liu

To address the challenges of high energy consumption and insufficient low-temperature activity in conventional thermal catalytic CO 2 methanation, this study reports a new nickel-based catalyst preparation via the solution combustion synthesis (SCS) technique for plasma-catalytic CO 2 methanation. The results demonstrate that the SCS method successfully reconstructed the CaCO 3 support, resulting in a porous structure with a high specific surface area (23.86 m 2 /g) as well as highly dispersed Ni nanoparticles (approximately 9.32 nm), which significantly enhanced the metal-support interaction. Combined density functional theory (DFT) calculations and electron paramagnetic resonance (EPR) analysis revealed that the SCS-reconstructed CaCO 3 surface is rich in oxygen vacancies, markedly enhancing the adsorption capacity for CO 2 and CO (with adsorption energies reaching - 3.83 eV and - 3.56 eV, respectively), thereby providing favorable conditions for the intermediates formation for CO 2 conversion. Under optimized conditions (3 wt% Ni loading, H 2 /CO 2 ratio of 5, discharge power of 28 W, and gas hourly space velocity of 180,000 mL g −1  h −1 ), the CO 2 conversion reached 79.1 % with a CH 4 selectivity of 91.9 % and an energy efficiency of 17.2 %. These performance metrics are significantly superior to those of catalysts prepared by conventional impregnation methods and pure plasma systems. In situ characterizations (plasma DRIFTS and OES) indicated that the basic sites on CaCO 3 preferentially adsorb CO 2 to form carbonate species. The synergistic effect between high-energy electrons generated by the plasma and the Ni active sites promotes the hydrogenation of carbonates to formate intermediates, which are subsequently converted into CH 4 via the formate pathway (HCOO∗ → CO∗ → CH 4 or HCOO∗ → CHO∗ → CH 4 ). The catalyst exhibited good stability during a continuous 24-h operation. This study provides a novel strategy for developing a bionic synergistic catalytic system for low-temperature and highly efficient CO 2 conversion.

CAS / MDL: 13478-00-7 471-34-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Environmental Science-Nano · 2025 · IF 5.1

High-efficiency CO2 capture and oil displacement by amine-engineered silica nanofluids enabling advanced CCUS

Jiang Liu,Longyu Wang,Wenzhao Sun,Runhu Li,Yuanshui Zhen,Shiyuan Guo,Bo Wang,Xingguang Xu

The escalating global demand for energy and the urgent need to mitigate climate change have spurred the development of next generation carbon capture utilization and storage (CCUS) techniques. This study introduces novel amine-functionalized silica nanoparticles (PEI@SiO2-KH550 NPs) as a high-performance CO2 carrier for CCUS applications. The nanoparticles were synthesized via a facile two-step modification process: grafting 3-aminopropyltriethoxysilane (KH550) onto silica nanoparticles, followed by coating with polyethyleneimine (PEI). This design significantly enhances CO2 absorption capacity by enriching the surface amine groups, so more CO2 will be carried into the target formation, interact with the oil and be stored underground. The resultant nanofluid (0.8 wt% concentration) demonstrated exceptional CO2 uptake (∼100 cm3 under ambient conditions in 40 minutes) and dispersion stability (zeta potential: +38.21 mV). Rheological analyses revealed its shear-thinning behavior, ensuring injectivity in porous media. Remarkably, CO2-saturated nanofluid reduced the dynamic interfacial tension (IFT) between crude oil and water from 19.24 mN m−1 to 7.82 mN m−1, primarily attributed to nanoparticle adsorption at the oil–water interface and in situ generation of surface-active carbamates. In addition, the pressure drop experiment revealed that the presence of PEI@SiO2-KH550 in the aqueous phase could significantly promote the CO2 diffusion rate and facilitate the mass transfer. Besides, molecular dynamics simulations demonstrated that PEI@SiO2-KH550 enhanced the CO2 saturated-nanofluid/crude oil interaction through impacting the interfacial energy (IFE), the radial distribution function (RDF) of light and heavy oil components, the interface thickness and the CO2 diffusion coefficient. Core flooding experiments validated the dual effectiveness of the developed nanofluid, achieving 79.8% oil recovery (10% higher than the carbonated water) and 48.6% CO2 sequestration rate (16.7% higher than carbonated water). The innovation lies in the nanoparticles' scalable synthesis, dual functionality (CO2 capture and interfacial modification), and compatibility with harsh reservoir conditions. This work may provide enlightening insights for integrating CO2-enhanced oil recovery (EOR) with CO2 geological storage, advancing next-generation CCUS technology.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2015 ·Vol. 3 ·期 46 ·23352-23359 · IF 7.443

Cross-linked polymer-derived B/N co-doped carbon materials with selective capture of CO2

Wuxue Zhao,Sheng Han,Xiaodong Zhuang,Fan Zhang,Yiyong Mai,Xinliang Feng

A new series of B, N-containing cross-linked polymers (PPs-BN) were achieved via Sonogashira cross coupling. These polymers exhibit very high carbon yields of around 70–80% even at 800 °C, which allow them to be efficiently converted to B/N co-doped porous carbons after pyrolysis at high temperature under an inert atmosphere. The materials have been fully characterized by Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analyses, nitrogen sorption measurements and X-ray photoelectron spectroscopy, revealing their high contents of boron and nitrogen up to ∼3.21% and ∼5.72%, respectively, as well as porous structures with the largest specific surface area of 291 m2 g−1. Their CO2 capacities reached 3.25 mmol g−1 at 273 K under 1 atm. In addition, the very high selectivity for CO2/CH4 with a ratio of more than 5 : 1 at 298 K renders them applicable for gas separation and purification.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2016 ·Vol. 6 ·期 94 ·91557-91561 · IF 3.289

Controllable synthesis of nitrogen-doped hollow carbon nanospheres with dopamine as precursor for CO2 capture

Kechan Xia,Yifeng Yu,Yunqian Li,Shuhui Li,Yuying Wang,Guoxu Wang,Hongliang Zhang,Aibing Chen

Nitrogen-doped hollow carbon nanospheres (N-HCSs) have been synthesized by self-polymerization of dopamine on silica spheres using the modified Stöber method. The fabrication process uses dopamine as carbon and nitrogen source and tetraethyl orthosilicate as a structure-assisting agent. The particle sizes and shell thicknesses of the N-HCSs can be easily tuned in the range of 270–700 nm and 30–55 nm, respectively, by simply modifying the ethanol/water volume ratios. The surface areas of N-HCSs are in the range of 345–463 m2 g−1, and the total pore volumes are in the range of 0.34–0.52 cm3 g−1. The obtained N-HCSs have uniform mesoporous size of ∼4.0 nm, and high nitrogen loading content of 7.2 at%. Besides, the N-HCSs exhibit a considerable performance for CO2 capture with a capacity of 3.09 mmol g−1 at 25 °C and 1.0 bar and a good cycling stability.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2023 · IF 15.1

Tailored porous structure and CO2 adsorption capacity of Mg-MOF-74 via solvent polarity regulation

Mengdan Ma,Anning Zhou,Tao Hong,Xinyu Jia,Moxuan Liu

Metal-organic frameworks (MOFs) are promising materials for CO 2 adsorption and capture. The unique crystal structure and the open porous structure of MOFs are key factors affecting their CO 2 adsorption performance, but the precise tuning of MOF structures remains a challenge. Herein, we applied the Kamlet-Taft method to investigate the effect of solvent proton-supplying/accepting capaity (β/α parameters) on the structure and CO 2 adsorption performance of Mg-MOF-74 by tuning the reaction solvent polarity. It was found that the ratio of the nucleation rate/growth rate of Mg-MOF-74 could be effectively controlled by adjusting the β/α value of the solvent, realizing the regulation of the crystal structure and morphology of Mg-MOF-74. In addition, the size of solvent molecules played a crucial role in the pore size of Mg-MOF-74. Interestingly, the solvent molecules were competitively coordinated with ligands and participate in the growth of Mg-MOF-74 upon decreasing the β/α value. The crystal structure, morphology and pore size of Mg-MOF-74 could be precisely regulated by the β/α value and molecular size of the reaction solvent, and the highest performing Mg-MOF-74 exhibited a CO 2 adsorption capacity of 7.38 mmol/g.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2010 · IF 3.203

Novel tertiary amino containing thin film composite membranes prepared by interfacial polymerization for CO2 capture

Xingwei Yu,Zhi Wang,Zhihong Wei,Shuangjie Yuan,Juan Zhao,Jixiao Wang,Shichang Wang

A novel tertiary amine group containing fixed carrier thin film composite (TFC) membrane was developed by the interfacial polymerization of 3,3′-Diamino-N-methyldipropylamine (DNMDAm) and trimesoyl chloride (TMC) on the polysulfone (PS) support membrane. ATR-FTIR, XPS , AFM and SEM were employed to characterize the active surface of the composite membrane . The gas transport property of the DNMDAm-TMC/PS membrane was investigated by studying the permselectivity varying with feed gas pressure and the possible reactions between gases and the membrane. Furthermore, the effects of two important factors (the DNMDAm concentration and the TMC concentration) on membrane morphology and performance were investigated. It was found that both the DNMDAm concentration and the TMC concentration play important roles in determining the membrane morphology and performance, which may reconcile some contradictory findings in some references. Moreover, the DNMDAm-TMC/PS composite membrane showed both good CO 2 /N 2 and CO 2 /CH 4 separation performance. For CO 2 /N 2 gas mixture (20/80 by volume), the membrane prepared with 0.0062   mol/l of DNMDAm and 0.0226   mol/l of TMC displayed a CO 2 permeance of 173   GPU and CO 2 /N 2 selectivity of 70 at 0.11   MPa feed pressure. For CO 2 /CH 4 gas mixture (10/90 by volume), the same membrane showed a CO 2 permeance of 118   GPU and CO 2 /CH 4 selectivity of 37 at 0.11   MPa feed pressure. The high CO 2 /N 2 and CO 2 /CH 4 separation performance of DNMDAm-TMC/PS composite membrane was mainly attributed to the thin film thickness and the properties of tertiary amino groups.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2023 · IF 9.5

Improving CO2 separation performance of PVAm membrane by the addition of polyethylenimine-functionalized halloysite nanotubes

Yonghong Wang,Xue Bai,Xinru Zhang,Jinping Li

Mixed matrix composite membranes (MMCMs) integrate the merits of inorganic and organic materials, but the tortuous transport passageways bring about large transfer mass resistance for gas transport. Herein, we prepared polyethylenimine-functionalized halloysite nanotubes (PEI-HNTs) by the electrostatic self-assembly of positively charged polyethylenimine and negatively charged halloysite nanotubes . Blending as-obtained PEI-HNTs with polyvinylamine (PVAm), MMCMs were prepared by casting above mixed solution on the top of ultrafiltration polysulfone (PSf) support. PEI-HNTs had good miscibility with PVAm due to hydrogen bonding . MMCMs (1 wt% PEI-HNTs loading) exhibited exceptional separation performance (CO 2 permeance: 179 GPU ; CO 2 /N 2 selectivity: 127.9), respectively, which were 1.4 and 2.3 times that of MMCMs embedding with 1 wt% HNTs. Noticeably, its value was beyond those of MMCMs incorporating with reported hollow tubular filler as well as other shape filler. This is due to the fact that PEI on the surfaces of HNTs provides a lot of amine carriers, which facilitate CO 2 transport. More importantly, the transport passageways are continuous, thus presumably reducing the CO 2 transfer resistance compared to other shape inorganic material filled-MMMs. Besides, resultant MMCMs revealed desirable stability for over 360 h, with a CO 2 /N 2 mixture as feed gas. Remarkably, it maintained superior gas separation performance (CO 2 permeance of 126 GPU; CO 2 /N 2 selectivity of 88.6) under the acidic conditions.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS A-GENERAL · 2024 · IF 4.7

Constructing electron transfer bridge of Pr doping MIL-125(Ti) for high-efficient photoreduction CO2

Meidan Que,Yabo Wang,Ruochen Shi,Xun Sun,Jun Xu,Peihong Ma,Yanbo Sun,Jing Guan,Shengxia An

MIL-125(Ti) is well known for having stable structure, tunable electron structure, and multiple active sites, which is commonly studied in the field of photocatalysis . In this work, a series of rare earth (RE) doped MIL-125(Ti) (RE=Ce, Pr, Tm, Dy, Eu, and Sm) are prepared via the one-step hydrothermal method . Notably, Pr-MIL-125 displays a significantly enhanced catalytic performance than other RE-doped MIL-125, resulting in a maximal CO and CH 4 yield of 13.30 and 0.87 µmol·g −1 ·h −1 , respectively, which are 2.53-fold and 4.14-fold of the pristine MIL-125. The layered morphology endows Pr-MIL-125 with more active sites and facilitates the reaction of photoreduction CO 2 . Furthermore, the promoted photoactivities attributed to Pr ion dopant can act as electron transfer bridge and suppress charge recombination. This work would provide insight and guidance for designing RE-MOF based photocatalysts and enhancing the performance of photoreduction CO 2 .

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2012 · IF 1.693

Adsorption of CO2, CH4, and N2 on Gas Diameter Grade Ion-Exchange Small Pore Zeolites

Jiangfeng Yang,Qiang Zhao,Hong Xu,Libo Li,Jinxiang Dong,Jinping Li

We prepared several different surfaces and pore volumes on small pore zeolites by hydrothermal synthesis and ion exchange (Li+, Na+, and Ca2+) based on three basic gas diameter grade structures of zeolites: KFI (0.39 × 0.39 nm), CHA (0.38 × 0.38 nm), and LEV (0.36 × 0.48 nm), which were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and elemental analysis. The surface area and microporous volumes were calculated using the Dubinin–Radushkevitch (D-R) equation based on CO2 adsorption at 273 K. The CHA was synthesized with a lower Si/Al ratio, and the surfaces and microporous volumes were changed greatly by ion exchange. KFI had a higher Si/Al ratio, and the scope of the surface could be kept smaller. Focusing on the CO2, CH4, and N2 adsorption isotherms at high pressure (1 MPa), we found that the samples were exchanged by Li+ and Na+ with bigger surfaces and greater adsorption volumes. The orifice diameter was very important in the sieving of CO2 and N2 or CO2 and CH4, while Na-LEV had an excellent sieving effect because N2 and CH4 could not diffuse into its structure like CO2. From the viewpoint of the separate adsorption equilibria: Na-zeolites had the highest data adsorption equilibrium selectivity for CO2 and N2 or CO2 and CH4, followed by Li-zeolites, which only had a strong adsorption potential of CO2; K-zeolites with high SCO2/N2 and SCH4/N2, based on the strong adsorption of CO2 and CH4. We conclude that the adsorption potential order was K-zeolites > Na-zeolites > Li-zeolites, so the bigger ions had a stronger affinity.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW · 2020 · IF 3.083

Experimental study on the dynamics and mass transfer of CO2 bubbles rising in viscoelastic fluids

Xiaofei Xu,Victus Kordorwu,Zhi Li,Fengxia Liu,Wei Wei,Zhijun Liu

Single CO 2 bubbles rising in quiescent viscoelastic polyacrylamide (PAA) aqueous solutions of different weight percentages (wt. %) were studied to obtain insight into the impact of fluid elasticity on the rising dynamics of dissolving bubbles. A random abrupt fall and rise in velocity was observed as the bubble velocity gradually and progressively decreased throughout the journey. This is the first time this observation is reported. In the most viscoelastic medium in which this phenomenon occurred, CO 2 bubbles decreased in diameter by at least 20% over 1m of height. Mass transfer analysis of the system indicated significant reduction of mass transfer coefficient with increase in weight percentage of the polymer solution. Comparison of experimental mass transfer coefficients with predictions for mobile and immobile gas-liquid interfaces were consistent with theoretical predictions from Higbie's and Frössling's equations respectively. The rising dynamics was correlated using dimensional analysis, and the prediction by a developed empirical correlation considering the combined effect of fluid elasticity and shear-thinning property showed a satisfactory agreement with experimental data in all liquids studied.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。