GREEN CHEMISTRY
·
2015
·Vol. 18
·期 6
·1731-1737
·
IF 8.02
Mengmeng Fan,Chunlin Zhu,Lin Liu,Qilu Wu,Qingli Hao,Jiazhi Yang,Dongping Sun
We have successfully prepared poly (3,4-ethylenedioxythiophene) (PEDOT)/N-doped reduced graphene oxide (N-rGO) by electrodeposition, post-reduction, and doping N atoms with a microorganism (as a green reagent) to modify PEDOT and resolve the exfoliation and fragmentation problems of pristine PEDOT. This modification greatly improves the electrochemical properties of PEDOT, showing great potential for a bio-electrode coating material, which should have excellent electrochemical properties, stability and biocompatibility. The as-prepared PEDOT/N-rGO shows lower impedance, and higher capacitive performance and cyclical stability than pristine PEDOT due to the doping of N-rGO. An MTT assay demonstrates this modified PEDOT has good adhesion, cell viability and proliferation, similar to pristine PEDOT. This indicates that the modification process does not restrain the good biocompatibility of pristine PEDOT, which results from the doping of highly biocompatible N-rGO by this green method. The wrinkled structure, residual oxygen containing functional groups and dopant N atoms of N-rGO lead to the formation of a fluctuating surface and an increase in the hydrophilicity of PEDOT, which increase the specific surface area and cell adhesion in cell culture, respectively. Consequently, this modified PEDOT improves the electrochemical properties, and resolves the exfoliation and fragmentation problems of pristine PEDOT, while still retaining the high biocompatibility of pristine PEDOT, which is promising for a bio-electrode coating material.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2021
·
IF 8.271
Juan Xiao,Junwei Chen,Zuqiao Ou,Junhang Lai,Tongwen Yu,Yi Wang
Herein, the application of a N-doped graphitic-carbon-coated iron nitride composite dispersed in a N-doped carbon framework (Fe 3 N@NG/NC) is investigated as a heterogeneous electro-Fenton (HE-EF) catalyst for the efficient removal of organics. The simultaneous carbonization and ammonia etching of iron-based metal organic framework (Fe-MOF) materials yielded well-dispersed N-doped carbon-coated Fe 3 N nanoparticles with a diameter of ~70 nm. The Fe 3 N and pyridinic N endowed the composite with high HE-EF activity for decomposing the electrogenerated H 2 O 2 to • OH. The Fe 3 N@NG/NC exhibited outstanding HE-EF performance in removing various organic pollutants with low iron leaching. A removal rate of 97–100% could be obtained for rhodamine B (RhB), dimethyl phthalate , methylene blue , and orange II in 120 min at a pH of 5.0. When the solution pH was set to 3.0, 5.0, 7.0, and 9.0, the removal rate of RhB reached 100%, 96%, 92%, and 81%, respectively, in 60 min at an optimum voltage of 0.0 V ( vs. reversible hydrogen electrode (RHE)). Moreover, the concentration of leached iron was expected to be below 0.03 mg/L in a wide pH range of 3.0–9.0. In addition, the RhB removal efficiency remained as high as 90% after six cycles in the reusability experiments. This work highlights the MOF-derived Fe 3 N composite as an efficient HE-EF catalyst and the corresponding catalytic mechanism, which facilitates its application in wastewater treatment .
✓ 已验证
DOI
高影响因子
JOURNAL OF CHEMICAL AND ENGINEERING DATA
·
2021
·
IF 2.694
JinTao He,XueMan Xu,Xia Gui
New phase equilibrium data of CO2 in n-hexadecane, n-heptadecane, n-octadecane, n-nonadecane, and n-eicosane were measured at temperatures from 333.15 to 373.15 K up to 23.73 MPa by a constant-volume method. Thermodynamic properties of Gibbs free energy (ΔsolG), enthalpy change (ΔsolH), entropy change (ΔsolS), and Henry’s coefficient (H) were calculated and analyzed for elucidating the dissolution mechanism of CO2 in alkanes. Results showed that the CO2 solubility increased with increasing pressure but decreased with increasing temperature and carbon number. In addition, increasing carbon number also led to an increase in the minimum miscibility pressure (MMP) of alkanes with CO2 and thus limited CO2 solubility in alkanes.
✓ 已验证
DOI
高影响因子
ENERGY
·
2019
·
IF 5.537
Lin Long,Weixing Zhou,Yunfeng Qiu,Zhenzhong Lan
Endothermic hydrocarbon fuel of active thermal protection has great potential in cooling system. The bottlenecks for the practical application are the unsatisfied heat sink and severe coking issue. Here, NiO nanoparticle/nanosheet hybrid thin layers were successfully wrapped on the commercial HZSM-5 (denoted as ZSM-5@Ni M ), and showing significant modulation ability for the acidity properties of HZSM-5 to boost supercritical cracking of n-decane. The as-prepared catalysts make the NiO and HZSM-5 show synergistic effect which dramatically lowers the overall acidity of composite, thus changes the cracking path of n-decane, and results in effective anti-coking properties. ZSM-5@Ni M decelerated many additional free radicals and generated more gases products by monomolecular beta cleavage reaction. Gases products also show positively correlating with the heat sink. The catalysts improve the heat sink of n-decane from 3.77 MJ/kg at 728 °C to 4.59 MJ/kg at 780 °C. Present work demonstrates that the introduction of nanostructured metal oxides into HZSM-5 will synergistically adjust the acidity of composite, leading to the manipulation of catalytic cracking path and extent, gas products, heat sink, coking behavior of supercritical n-decane, finally providing deep insights for the design and fabrication of catalysts for hydrocarbon fuel cracking.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2020
·
IF 0
Yixiang Pan,Xiaoyan Wang,Jianguo Lu,Qing Yan,Weiyong Yuan,Chang Ming Li
Metal–organic complex (MOC) multilayers are, for the first time, conformally constructed on Ni foam (NF) via a three-component sequential layer-by-layer (LbL) self-assembly approach and converted to three-dimensional (3-D) NF-supported interconnected CoO nanoparticles (NPs)/N-doped carbon nanohybrid multilayers via calcination. The obtained nanoarchitecture delivers an overpotential of 318 mV to achieve 10 mA cm–2 and a Tafel slope of 46.1 mV dec–1. This activity is superior to most reported oxygen evolution reaction (OER) catalysts, and even much better than those of Ir- and Ru-based ones measured under the same conditions (0.1 M KOH). Additionally, this electrode undergoes negligible potential and current change after 19.8 h chronopotentiometric measurement and 300 cyclic voltammetry cycles. The outstanding catalytic performance is mainly attributed to the ultrasmall and high-density CoO NPs embedded in N-doped carbon uniformly assembled on the 3-D substrate significantly increasing electrochemically accessible active sites and durability and the N-doped carbon greatly promoting intrinsic activity of CoO. This work not only creates 3-D highly tunable networked nanostructured electrodes with excellent durability for high-efficiency electrocatalysis but also develops a facile, economical, and extremely versatile strategy to controllably self-assemble conformal MOC-based multilayers with multifunctionality and superior performance on essentially any substrate at the molecular level for broad applications.
✓ 已验证
DOI
JOURNAL OF CHEMICAL SCIENCES
·
2017
·Vol. 129
·期 3
·289-294
·
IF 1.235
LIU YAOWEN,ZHAO FEN,ZHOU HAOHUA,XIE KAI,JIANG YUBO
CuI-catalyzed selective Ullmann C–O coupling of 1,4-disubstituted 1,2,3-triazole bromides with phenols were achieved through the coordination of N(2) atom. The ortho C–Br bond in N(1) aryl can be selectively coupled with phenols, while other C–Br bonds remain inert, generating ortho aryloxyl 1,4-diaryl 1,2,3-triazoles.
CuI-catalyzed selective Ullmann C–O couplings of 1,4-disubstituted 1,2,3-triazole bromides with phenols were achieved through the coordination of N(2) atom in triazole. The ortho C-Br bond in N(1) of aryl can be selectively coupled with phenols, while other C-Br bonds remain inert, generating ortho -aryloxyl 1,4-diaryl 1,2,3-triazoles.
✓ 已验证
DOI
高影响因子
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
·
2022
·
IF 7.926
Yuansi Hu,Xinglong Chen,Shiqi Mu,Qibin Li
Oil-based drilling cuttings (OBDC) have a high content of petroleum pollutants with strong mutagenic, carcinogenic and teratogenic properties. Solvent extraction can effectively separate petroleum pollutants from OBDC. However, single solvent has preferred solubility for different types of petroleum pollutants in OBDC, resulting in a lower oil removal efficiency. Therefore, based on the polarity difference between methanol (Me) and n-hexane (He), a method was developed to extract petroleum pollutants from OBDC using Me&He. Compared with methanol or n-hexane alone, the oil removal efficiency of compound Me&He was significantly increased to 94.58 %, and 37, 37 and 77 petroleum pollutants were extracted using Single methanol, Single n-hexane and Compound Me&He, respectively. Methanol extraction preferentially solubilised polar molecules such as alcohols and carboxylic acids , while n-hexane extraction preferentially solubilised alkanes and other nonpolar molecules. Compound Me&He compensated for the low solubility of single solvents for petroleum pollutant extraction from OBDC. Additionally, because methanol and n-hexane are not mutually soluble, it was easy to separate the recycled components. Compared with other common solvent extraction technologies, compound Me&He had advantages including simple operation and high oil removal efficiency. This study provided a theoretical basis and technical reference for the efficient processing and resource recycling of OBDC.
✓ 已验证
DOI
高影响因子
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
·
2021
·
IF 6.064
Lezhu Su,Lizhou Ou,Yujiao Wen,Yifan Wang,Weilin Zhao,Zhi Zhou,Mei-e Zhong,Yongfa Zhu,Nan Zhou
Exploring catalyst materials which are advancing, recyclable and with high catalytic performances to remove persistent organic pollutants such as Quinclorac (QNC) is important. In this work, a novel N-doped carbon support CoFe 2 O 4 /Fe 0 hybrid catalyst (CFO/Fe@C) was in situ formed by a simple co-precipitation and calcination process. Fine intergrowth crystal CoFe 2 O 4 and Fe 0 were uniformly dispersed on the N-doped porous carbon that derived from the raw material Ethylene Diamine Tetraacetic Acid (EDTA), which also provided chelating effect to prevent the agglomeration of the metals. Interestingly, the Fe 0 could only be formed with the presence of cobalt, possibly due to the increased reduction property resulted from the particle refinement. The as-formed Fe 0 could not only activate the peroxymonosulfate (PMS) but also reduce the Co 3+ , resulting in a synergistic impact to remarkably enhance the degradation performance. Besides, the N-doped porous carbon can also benefit the degradation of pollutant by strengthening the electron transfer. A good degradation efficiency of QNC was obtained in CFO/Fe@C-PMS system and most of the QNC had been degraded to carbon dioxide , water and other small molecular organisms. The removal rate remained over 70% after four reuses and the material could be easily recovered from the solution due to the good magnetic properties. Therefore, the as-prepared CFO/Fe@C catalyst should be an ideal catalyst for the removal of organic pollutants .
✓ 已验证
DOI
高影响因子
NANOTECHNOLOGY
·
2023
·Vol. 34
·期 14
·145403
·
IF 3.5
Huiying Wang,Ziyan Kong,Minghao Wang,Bing Huang,Lunhui Guan
Manganese and nitrogen co-doped porous carbon (Mn–N–C) are proposed as one of the most up-and-coming non-precious metal electrocatalysts to substitute Pt-based in the oxygen reduction reaction (ORR). Herein, we chose metal triazole frameworks as carbon substrate with hierarchical porosity for trapping and anchoring Mn-containing gaseous species by a mild one-step pyrolysis method. The optimized Mn–N–C electrocatalyst with a large metal content of 1.71 wt% and a volume ratio of 0.86 mesopores pore delivers a superior ORR activity with a half-wave potential (E1/2) of 0.92 V in 0.1 M KOH and 0.78 V in 0.1 M HClO4. Moreover, the modified Mn–N–C catalyst showed superior potential cyclic stability. The E1/2 remained unchanged in 0.1 M KOH and only lost 6 mV in 0.1 M HClO4 after 5000 cycles. When applied as the cathode catalyst in Zn-air battery, it exhibited a maximum peak power density of 176 mW cm−2, demonstrating great potential as a usable ORR catalyst in practical devices.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2024
·
IF 8.1
Weiyan Jiang,Zihan Gao,Miao Shen,Jing Zhou,Rui Tang,Linjuan Zhang,Jian-Qiang Wang
The two-dimensional molybdenum carbide (Mo 2 CT x ) has a similar electronic structure to platinum, which has the potential to be one of non-precious metals catalysts for hydrogen evolution reaction (HER). However, the preparation of Mo 2 CT x by conventional HF and LiF–HCl etching method inevitably introduces the –F and –Cl terminations on the surface, which adversely affect activity and stability. In this study, the LiCl–KCl–Li 3 N molten salt was used to treat Mo 2 CT x at 600 °C and atmospheric pressure and introduce nitrogen heteroatoms . After treated in LiCl–KCl–Li 3 N molten salt, the HER performance of nitrogen-doped Mo 2 CT x is improved compared with that of un-doped Mo 2 CT x , which should be attributed to the optimization of the electronic structure of N–Mo 2 CT x and lower hydrogen adsorption energy barrier. This simple molten salt method provides a way to modify non-precious metal HER catalyst and introduce nitrogen heteroatoms.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2019
·
IF 4.914
Hao Wang,Xiaohao Liu,Guangyue Xu,Ziwei Guo,Ying Zhang
ABSTRACT Owing to Fe being the most abundant and least expensive transition metal on the earth, the utilization of Fe-based catalysts for catalytic hydrogenation has attracted worldwide attention. In this work, a series of N-doped C supported Fe catalysts (Fe-N-C) were prepared by co-pyrolysis of cellulose and ferric chloride under ammonia atmosphere. Characterization methods such as elemental analysis, atomic absorption spectroscopy, nitrogen adsorption-desorption isotherms, transmission electron microscopy, high-resolution transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were carried out to explore the physicochemical properties of the catalysts. Using hydrogenation of nitrobenzene as a model reaction, the catalysts prepared at different pyrolysis temperatures displayed different activities. Fe-N-C-700 exhibited the best activity among these catalysts, with the yield of aniline being up to 98.0% under 5 MPa H 2 at 120 °C after 12 h. Combined with the results of catalyst characterization and comparative tests, the transformation of Fe species and the generation of N-doped C, especially graphitized N-doped C, in the catalyst may be the main factors affecting the activity. A kinetic study was carried out and the apparent activation energy was obtained as 31.53 kJ/mol. The stability of the catalyst was also tested and no significant decrease in the activity was observed after 5 runs.
✓ 已验证
DOI
高影响因子
ACS Omega
·
2019
·
IF 2.584
Lili Geng,Jianjun Gong,Guilong Qiao,Songshou Ye,Jinbao Zheng,Nuowei Zhang,Binghui Chen
Pt(NH3)4(NO3)2, Pt(NH3)4(Ac)2, (NH4)2PtCl4, and H2PtCl6 were used to prepare Pt/SAPO-11 catalysts to investigate the effect of Pt precursors on the hydroisomerization of n-dodecane. The catalyst derived from Pt(NH3)4(NO3)2 displays the best hydroisomerization activity and selectivity among these precursors. The hydroisomerization conversion of n-dodecane is affected by the platinum particle size, platinum dispersion, the location of platinum, and the valence state of platinum. The selectivity of n-dodecane is determined by the number of Brønsted acid sites and Pt crystal planes. These conclusions are verified by combining transmission electron microscopy, high-resolution transmission electron microscopy, hydrogen temperature programmed reduction, NH3-temperature programmed desorption, and Py-IR studies. The catalyst prepared with Pt(NH3)4(NO3)2 as the precursor exhibits the smallest platinum particle size and the highest platinum dispersion. Most of the platinum particles are supported on the external surface of SAPO-11 with the Pt(111) crystal face. Such a catalyst also possesses a suitable number of Brønsted acid sites and then displays the best catalytic performance. Obviously, the use of various precursors for the Pt-based catalyst can significantly affect the performance of Pt/SAPO-11 for the hydroisomerization of n-dodecane.
✓ 已验证
DOI
高影响因子