CARBOHYDRATE POLYMERS
·
2020
·
IF 7.182
Maoli Yin,Yingfeng Wang,Yan Zhang,Xuehong Ren,Yuyu Qiu,Tung-Shi Huang
The aim of this study was to develop novel nanofibrous membranes based on the quaternary ammonium N-halamine chitosan (CSENDMH) and polyvinyl alcohol (PVA) for antibacterial and hemostasis wound dressing. To improve the antimicrobial properties of nanofibrous membranes, a new chitosan-quaternary ammonium N-halamine derivative was successfully synthesized, and the structure was analyzed by 1H NMR and 13C NMR, fourier transform infrared (FTIR) spectroscopy, and elemental analysis. The morphological and water absorption ability studies showed that the membrane had a uniform bead-free network and high porosity structure like natural extracellular matrix as well as high hydrophilicity. For in vitro evaluation of the hemostatic effect, the membranes showed excellent blood clotting capacity, especially the PVA/CSENDMH membranes. The antimicrobial assay demonstrated excellent antibacterial activity of nanofibrous membranes against both gram-negative and gram-positive bacteria. Furthermore, the cytocompatibility assay results indicated that human fibroblasts could adhere and proliferate on the membranes, thus corroborating their biocompatibility.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Pharmaceutics
·
2019
·Vol. 11
·期 10
·524
·
IF 4.773
Kaixiang Zhou,Xiaofang Wang,Dongmei Chen,Yuanyuan Yuan,Shuge Wang,Chao Li,Yuanyuan Yan,Qianying Liu,Liwei Shao,Lingli Huang,Zonghui Yuan,Shuyu Xie
TheStaphylococcus aureus(S. aureus) cow mastitis causes great losses to the cow industry. In order to improve the treatment effect of tilmicosin against cow mastitis, the combination of solid lipid nanoparticle (SLN) technology with in situ hydrogel technology was used to prepare the self-assembly tilmicosin nanogel (TIL-nanogel). The physicochemical characteristics, in vitro release, antibacterial activity and in vivo treatment efficacy of TIL-SLNs and TIL-nanogel were studied, respectively. The results showed the loading capacity (LC), encapsulation efficiency (EE), size, zeta potential and poly dispersion index (PDI) of TIL-nanogel were 23.33 ± 0.77%, 67.89 ± 3.01%, 431.57 ± 12.87 nm, 8.3 ± 0.06 mv and, 0.424 ± 0.032, respectively. The TIL-nanogel showed stronger sustained release in vitro than TIL-SLNs and commercial injection. The cure rate of half dosage and normal dosage of TIL-nanogel was 58.3% and 75.0%, which was higher than that of commercial injection (50.0%) at normal dosage. The results suggest that the treatment dosage of tilmicosin for cow mastitis could be reduced by TIL-nanogel. The novel TIL-nanogel will be beneficial by decreasing the usage of tilmicosin and the treatment costs of cow mastitis.Keywords:tilmicosin;solid lipid nanoparticles;sodium alginate-chitosan nanogel;Staphylococcus aureus;cow mastitis
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Yuqing Lu,Ziyi Wang,Xiao-kun Ouyang,Chao Ji,Yonglun Liu,Fangfang Huang,Li-Ye Yang
Diclofenac sodium (DS) is an emerging contaminant that is toxic and remains at high concentrations in natural aquatic environments. The aim of this study was to fabricate a novel spherical polymeric adsorbent composed of cross-linked chitosan beads grafted by polyethylenimine (PEI) to remove DS from water. The adsorbents were thoroughly characterized using Fourier transform infrared spectroscopy , scanning electron microscopy, elemental analyses, and X-ray photoelectron spectroscopy. A cross-linking step was expected to enhance adsorption. The experimental data obtained from a series of adsorption experiments were fit well by the Langmuir isotherm model and pseudo-second-order model. The epichlorohydrin–PEI adsorbent (EPCS@PEI) showed a maximum adsorption capacity of 253.32 mg/g and removal efficiency of nearly 100% for the DS in the initial 50 mg/L solution. Therefore, EPCS@PEI is proposed as a potential adsorbent for DS removal, where these initial findings are expected to promote further design and fabrication of effective adsorbents for practical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MOLECULES
·
2019
·Vol. 24
·期 24
·4552
·
IF 3.06
Yingjie Zhu,Dong Li,Tarun Belwal,Li Li,Hangjun Chen,Tingqiao Xu,Zisheng Luo
A novel nano-silicon oxides (SiOx)/chitosan complex film was prepared using ultrasonic assistant in the process of dissolving chitosan and silicon oxides (SiOx), and characterized by transmission electron microscopy. Its effect on quality preservation of tomatoes (Solanum lycopersicumL. cv. Zheza 205) was investigated under ambient temperature. The results revealed that the nano-SiOx/chitosan complex (NSCC) film retarded weight loss and softness, delayed the titratable acids and total soluble solids loss, and thus markedly extended shelf life of green tomatoes. The antimicrobial activity of tomatoes coated with NSCC film was also recorded higher compared to chitosan (Ch) films and control. In addition, the NSCC film-coated tomatoes prevent the increase of malondialdehyde content and total polyphenol content. Moreover, the peroxidase activity, phenylalanine ammonia-lyase activity, and polyphenoloxidase activity of tomatoes coated with NSCC film were found lower than that in other treatments. These data indicated that the beneficial effects of nano-SiOx/chitosan complex coating on postharvest quality were possibly associated with the lower rate of O2/CO2transmission coefficient, limiting food-borne pathogenic bacterial growth, higher antioxidant activities, and also higher reactive oxygen species (ROS) scavenging and anti-browning activities of related enzymes in the tomatoes. Further, the results of the study could be used to successfully develop a novel nano-SiOx/chitosan complex film for improving the postharvested quality of tomatoes and thus effectively utilized by the food packaging industry.Keywords:nano-SiOx/chitosan complex coating;green tomato;postharvest quality;microbial load;enzyme activities
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Siyuan Yu,Jingbao Wang,Jianlan Cui
A novel chitosan-based magnetic composite CTS@SnO 2 @Fe 3 O 4 was prepared by water-in-oil emulsification for adsorbing anionic dye RBR in aqueous solution. The physicochemical properties of the obtained material were characterized by FTIR , XRD, VSM, TGA , SEM and N 2 adsorption-desorption. Effects of contact time, solution pH, ionic strength , initial dye concentration and temperature on the adsorption of reactive brilliant red (RBR) were investigated via batch adsorption experiments. Compared with CTS@Fe 3 O 4 , CTS@SnO 2 @Fe 3 O 4 showed better adsorption performance for RBR, represented by the adsorption capacity reaching a maximum of 981.23 mg/g at pH 2, illustrating that the introduction of SnO 2 was beneficial for adsorption. The kinetic data and equilibrium adsorption behaviors were well depicted by pesudo-second-order kinetic model and Langmuir isotherm model, respectively. Evaluation of the thermodynamic parameters revealed that the adsorption process was spontaneous and endothermic. XPS analysis confirmed a potential adsorption mechanism that the N atoms on composite chelated with RBR ions in solution. In addition, CTS@SnO 2 @Fe 3 O 4 particles were easy to be magnetically separated and had outstanding reusability after five times recycling. All in all, CTS@SnO 2 @Fe 3 O 4 was proven to be an efficient and promising adsorbent for the dye removal due to its higher adsorption capacity compared with other adsorbents.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Ru Zhong,Quan Zhong,Meijun Huo,Binglin Yang,Hong Li
Nano-ZnO (nZnO) has been widely used as antibacterial, UV-shielding and photocatalysis materials, but limited by its contentious biosafety. In this paper, chitosan (CS) was introduced to enhance the biocompatibility. To solve the problem that nZnO reacts with the CS acid solution, alternate-feed spray drying was adopted to fabricate nZnO/CS composite microspheres . It was showed that nZnO remained the hexagonal phase, dispersed and embedded into CS microspheres. Based on the results of cytotoxicity and hemolysis test, biosafety was improved obviously. Further, the antibacterial activity of nZnO/CS was notably better than either of CS and nZnO individually. UV-shielding property and photocatalytic degradation test were estimated. In a word, alternate-feed spray drying presents a novel and cost-efficient method to fabricate multifunctional nZnO/CS microspheres with enhanced biosafety.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Yuan Li,Yubin Ying,Yaqi Zhou,Yujun Ge,Chunhong Yuan,Chunhua Wu,Yaqin Hu
The goal of the study is to develop a novel pH-indicating intelligent packaging by using purple potato extractions (PPE), chitosan and surface-deacetylated chitin nanofibers (CN). Since the major pH-sensitive pigment of PPE was anthocyanin (24.3 mg/g), whether anthocyanins could be loaded on a solid phase to prevent its color fading was further tested. The results of Fourier transform infrared spectrophotometry (FT-IR) and differential scanning calorimetry (DSC) indicated that PPE was efficiently attached into the chitosan film. Meanwhile, adding CN (0.450%, w/v) into chitosan film could significantly enhance the tensile strength (TS), the water-resistant ability and the roughness of chitosan film. Whereas higher content of CN (0.600%, w/v) did not further improve mechanical properties and CN would distribute unevenly due to aggregation in the films. In addition to pH-indicating ability, CS-CN-PPE exhibited the extraordinary antioxidant activities and this provides another advantage of packaging readily oxidizable substances. Taken together, the current study provided a novel and biocompatible packaging with strengthened mechanical property and intelligent pH indicator.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Yehang Bao,Linjun Shao,Guiying Xing,Chenze Qi
Cobalt, nickel and iron are efficient catalysts for numerous chemical and biological reactions, but they are hardly immobilized on solid matrixes due to their relatively weak chelation with the surface molecules. We have employed a co-electrospraying coupling with glutaraldehyde cross-linking technique to prepare cobalt (Co 2+ ), nickel (Ni 2+ ) and iron (Fe 2+ ) catalyst embedded chitosan microparticles (M@MicroCS) (M = Co, Ni and Fe). The Co@MicroCS beads exhibited excellent catalytic activity for the Heck cross-coupling reactions of aromatic iodides with alkenes. Moreover, the Co@MicroCS bead catalyst could be even reused at least for five times without significant loss of the catalytic activities. The average diameter of the free volume holes for the porous Co@MicroCS beads was determined to be much larger than the size of the reactant and product molecules, allowing them to freely migrate through the catalytic sites inside the chitosan beads. These results clearly indicate that the Heck reactions catalyzed by the Co@MicroCS beads primarily occurs inside the porous chitosan beads. Taken together, we have demonstrated a straightforward approach to prepare efficient and recyclable heterogeneous catalysts derived from the first-row transition metal catalysts by entrapping them inside the chitosan microparticles.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Liangbin Xia,Youmei Long,Dan Li,Li Huang,Yanqing Wang,Fangfang Dai,Fenghua Tao,Yanxiang Cheng,Hongbing Deng
Pelvic floor dysfunction diseases (PFD) become more prevalent with the increase of elderly population, and complications of pelvic floor reconstructive surgery (e.g. infection and exposure of mesh) have been troubling to patients and gynecologists. In this study, the nanofibrous mats were prepared by alternately depositing chitosan (CS) and silk fibroin (SF) on Nylon6 (N6) nanofibrous mats via layer-by-layer (LBL) technique. The as-prepared mats were characterized. The results showed that CS and SF molecules were successfully assembled on the nanofibers. Additionally, after LBL modification, the hydrophilicity of the nanofibrous mats was reduced and the mechanical properties were improved. Furthermore, the antibacterial activity of the LBL-structured mats reached >95% inhibiting Escherichia coli ( E. coli) and Staphylococcus aureus ( S. aureus) . The in vitro cell co-culture experiments indicated that LBL-structured mats had smaller toxic effects and more excellent biocompatibility to L929 fibroblasts, especially the mats with 15 bilayers coated films. Hence, the LBL-structured mats are promising materials for pelvic floor reconstruction to reduce postoperative pelvic complication rates.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2019
·
IF 4.959
Xueyun Chen,Ming Fan,Huaping Tan,Bowen Ren,Guoliang Yuan,Yang Jia,Jianliang Li,Dangsheng Xiong,Xiaodong Xing,Xiaohong Niu,Xiaohong Hu
In order to broaden the abilities of injectable hydrogel scaffolds, a self-healing chitosan/alginate hydrogel encapsulated with magnetic gelatin microspheres (MGMs) was prepared for anti-cancer drug delivery and soft tissue engineering. The hydrogel was formulated by cross-linking carboxyethyl chitosan (CEC) and oxidized alginate (OAlg) via the Schiff-base reaction. To strengthen the mechanical and biological capabilities of hydrogel, MGMs containing 5-fluorouracil (5-Fu) were prepared by an emulsion cross-linking method. In vitro gelation time, swelling ratio, degradation, compressive modulus and rheological behaviors were tested to monitor the effect of MGMs on the CEC-OAlg hydrogel. With a concentration of 30 mg/mL MGMs, the composite hydrogel provided with the suitable performance and showed excellent self-healing ability under physiological condition. Moreover, this composite hydrogel showed the sustained in vitro drug release compared with control MGMs and CEC-OAlg hydrogel. Our results demonstrated that this magnetic and self-healing CEC-OAlg hydrogel scaffold encapsulated MGMs containing 5-Fu was expected to be a platform for drug delivery and soft tissue engineering.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Changquan He,Lei Shi,Sichao Lou,Bao Liu,Wenqing Zhang,Lingfan Zhang
In this present study, spherical magnetic calcium modified chitosan micro-particles (MG-Ca-CMPs) were synthesized by using embedding/cross-linking method and employed as an efficient adsorbent for Orange II (OII) in single system and coexisted with methylene blue (MB) in binary system. The obtained MG-Ca-CMPs were characterized by fourier transform infrared spectrometer, transmission electron microscopy , scanning electron microscope, X-ray diffraction and magnetic property measurement system analyses, which demonstrated that the MG-Ca-CMPs possessed core-shell structure and excellent superparamagnetic property. The adsorption behaviors for OII in single system and coexisted with MB in binary system were systematically studied. Adsorption experiments data showed that MG-Ca-CMPs presented an excellent high affinity to acid dye OII (q max = 962 mg·g −1 ) in single system, which followed the Langmuir isotherm model and pseudo-second order kinetics model. Interestingly, MB, hardly adsorbed in acidic solution, had effective adsorption performance (increased from 20 mg·g −1 to 350 mg·g −1 ) in binary system by MG-Ca-CMPs. This result was attributed to the synergistic effect caused by the positive and negative charge attraction between OII and MB, forming the positive-negative-positive adsorption mechanism. It is believed that MG-Ca-CMPs could be used as a potential adsorbent for the adsorption and separation of coexisting anionic-cationic dyes from dye wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMOSPHERE
·
2019
·
IF 5.108
Zifen Luo,Hongyi Chen,Shichuan Wu,Cao Yang,Jianhua Cheng
Aluminum-based metal-organic framework/sodium alginate-chitosan (Al-MOF/SA-CS) composite beads were synthesized and employed as an adsorbent for the removal of bisphenol A (BPA). Several methods, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), nitrogen adsorption-desorption isotherms and X-ray photoelectron spectroscopy (XPS), were used to characterize the prepared adsorbents. Results demonstrated that the introduction of CS could change the porosity of the beads and the obtained Al-MOF/SA-CS composite beads possessed higher surface area and total pore volume comparing with the beads without CS. Batch experiments were carried out to explore the adsorption performance and the results displayed that the enhanced adsorption capacity was achieved by Al-MOF/SA-CS beads compared to the Al-MOF/SA ones. It is also found from the fitting results that the adsorption process fitted well with the pseudo-second-order kinetics model and followed the Freundlich isotherm model. Importantly, the composite beads could be easily recycled and regenerated by methanol and the adsorption efficiency still maintained as high as 96% even after five cycles. Furthermore, it can be inferred from the experimental results that the π-π stacking, hydrogen bonding and cation-π interaction could be the primary adsorption mechanisms. Considering the high adsorption properties, good water stability, especially easy separation, and excellent recyclability , Al-MOF/SA-CS composite beads could be a promising adsorbent for the removal of BPA from contaminated water .
✓ 已验证
产品关联
DOI
PubMed
高影响因子