CARBOHYDRATE POLYMERS
·
2020
·
IF 7.182
Jinshun Lu,Xiao Han,Lin Dai,Chenyu Li,Jingfeng Wang,Yongda Zhong,Faxin Yu,Chuanling Si
The development of biomass-based hydrogel conductive devices is a promising but challenging subject. Here, cellulose was used to develop a strong, tough, and self-adhesive conductive hydrogel by constructing a synergistic covalent cross-link network and multiple physical interactions. Tannic acid-coated cellulose nanofibrils (TA@CNFs), poly(acrylamide), and ferric ions (Fe 3+ ) were introduced in a composite network by coordination and hydrogen bonds. The strategy of interpenetrating network endowed this hydrogel with high mechanical strength (storage modulus over 14 K Pa), and strong toughness and tensile strength (fracture stress up to 108 K Pa). Chelated Fe 3+ by metal coordination as inorganic conductive phase leads to good electrical conductivity (conductivity up to 3.12 S m −1 ). The obtained hydrogel also exhibited fine flexibility, extensive self-adhesion, and adjustable strain responsiveness for monitoring human joint movements. This work provided a new approach to design conductive hydrogels, and also can expand the application of cellulose-reinforced materials in the sensor field.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2020
·
IF 5.162
Yuqing Yu,Shilin Liu,Ying Pei,Xiaogang Luo
Dyeing industry highly contributes to environmental pollution and this needs to be addressed on priority. Pd NPs/CMs, a highly efficient and reusable catalyst for methylene blue (MB) decolorization , were fabricated by in-situ reduction method based on the cellulose microspheres (CMs). Pd NPs/CMs were characterized for the structure and catalytic performance by spectroscopic techniques such as SEM, EDS, XRD, IR, XPS, porosity, zeta potential , MS, and UV–visible spectroscopy, which all demonstrated that Pd NPs were distributed on the cellulose microspheres uniformly and exhibited excellent catalytic performances to decolorize a model organic dye MB in the presence of NaBH 4 with catalytic efficiency higher than 99.8%. More importantly, Pd NPs/CMs were proven to show excellent reusability for at least five cycles. Decolorization mechanism of MB, via the destruction of the chromophores (C N and S ) of MB, was established with the help of MS combined with IR and XPS. Blank experiments using pure cellulose microspheres were carried out simultaneously to estimate the level of catalytic capacity achieved to Pd NPs/CMs. These materials proved themselves having great potential in large scale applications to treat dye-containing wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2020
·
IF 16.683
Shanhui Zhu,Huan Liu,Sen Wang,Xiaoqing Gao,Pengfei Wang,Jianguo Wang,Weibin Fan
One-step efficient conversion of cellulose into value-added γ-valerolactone (GVL) is of great interest because it not only integrates complex tandem reactions in one-step, but also does not need additional hydrogen sources. To achieve this goal, it is crucial to fabricate high-performance catalyst that can accelerate both hydrolysis of cellulose and further transformation of generated stoichiometric levulinic acid (LA) and formic acid (FA) into GVL. CoNi nanoparticles encapsulated in N-doped thin graphene shell gave GVL yield as high as 55.9 % at 200 °C combined with Ag + -exchanged heteropolyacid (AgPW). This composite catalyst is highly resistant to the corrosion of LA and FA, and hence shows high catalytic stability. LA-adsorption FTIR spectra and DFT calculations indicate that LA and FA can penetrate through shell graphene layers into core CoNi sites via cracks. Compared to H 2 , FA can much more rapidly reduce LA because of its low dissociation energy barrier and high dissociation rate.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2020
·
IF 7.182
Jizhen Huang,Zhaoqing Lu,Jiaoyang Li,Doudou Ning,Zhanfan Jin,Qin Ma,Li Hua,Songfeng E,Meiyun Zhang
Recently, aramid nanofibers (ANFs) have drawn the attention of scientist due to the high mechanical strength, high-temperature resistance, and high electrical and thermal insulation properties. In this work, we aimed at improving the mechanical and ultraviolet shielding properties of hydroxyethyl cellulose (HEC) film by using ANFs as additives. Mechanical results show that the 1.0 % ANFs could improve the tensile strength of pure HEC film by 176.6 %. Meanwhile, the ANFs additives can also enable the HEC film excellent ultraviolet (UV) shielding and visible light transmittance, as well as high UV radiation resistance ability. It is believed that the high mechanical strength of the HEC/ANFs composites is derived from the rearrangement of HEC chains along the tensile direction after the addition of hard ANFs and the enhanced hydrogen bonds between HEC and ANFs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2020
·
IF 6.182
Kui Cui,Chao Wang,Yun Luo,Lin Li,Jing Gao,Wenyan Chen,Wenfan Xu,Yinhua Liu,Zhiyuan Ma,Xianfen Wang
Doping engineering is of great importance in adjusting the electronic conductivity, structural defects and energy storage performance of carbonaceous materials. Herein, a stepwise heteroatoms doping engineering is designed to modify cellulose-derived hierarchical porous carbons (HPC) with rich nitrogen (N@HPC) and subsequent boron (B@N@HPC). The effect of boron doping on nitrogen rich HPC is investigated to reveal the evolution of microstructures, porosity, surface area, and chemical groups. It is found that boron doping cannot further change the interlayer distance of nitrogen-rich HPC, but B@N@HPC exhibits excellent electrochemical performance as an anode in sodium ion batteries (SIBs). Compared with N@HPC, B@N@HPC anodes show a larger capacity of 308 mAh g −1 at 0.02 A g −1 , which is 137% larger than that of nitrogen doped HPC. Electrochemical Kinetics analysis through galvanostatic intermittent titration technique (GITT) and electrochemical impedance spectroscopy (EIS) suggests a capacitive-dominated process combined with a higher Na + diffusion coefficient and lower charge transfer resistance for the B@N@HPC than that of N@HPC. The effect of boron doping on the carbon anodes can be taken to explore an enhanced performance for SIBs.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2020
·Vol. 27
·期 14
·8011-8026
·
IF 4.21
Bi Hongjie,Ren Zechun,Ye Gaoyuan,Sun Hao,Guo Rui,Jia Xin,Xu Min
Abstract In this study, a polymer blend consisting of thermoplastic polyurethane and polycaprolactone, which was used as the self-healing matrix, was prepared via a solution casting method. Cellulose nanocrystals (CNCs) were then incorporated to enhance the interfacial compatibility of the multi-material and maintain its self-healing ability via the three-dimension printing method. The effects of the CNCs on the chemical structure, mechanical, and thermal properties of the polymer composites were investigated. The results show that the composites with CNCs exhibit excellent tensile and thermal properties, and a high interfacial compatibility. Specifically, the blend containing 1% of CNCs possesses excellent mechanical properties, as its tensile strength of 31 MPa and elongation at break of 1600% show. Further analyses on the reinforced mechanism of such mixture were carried out by using molecular dynamics simulations. The CNC-reinforced composites maintain their good self-healing properties and function for a minimum of three cycles. Their superior thermal stability, mechanical, and self-healing properties, as well as the low cost of the raw materials, and the simple manufacturing process make these blends ideal for surface protection coatings, sensors, and healthcare materials applications. Graphic abstract
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2020
·
IF 7.182
Feng Yu,Hongbing Zhang,Lingzhu Zhao,Zhipeng Sun,Yuli Li,Yan Mo,Yong Chen
With the advent of gel polymer electrolyte (GPE), a series of safety problems of lithium ion batteries have been resolved. However, poor self-standing property, the low ionic conductivity and Li + transference number are still the obstacles that impede the practical application of GPE. Herein, a flexible and eco-friendly GPE is designed using allyl-modified cellulose with methylcellulose through simple UV curing. The crosslinked structure facilitates the integrity of GPE during use, and methylcellulose guarantees the high affinity to liquid electrolyte and improve interfacial compatibility. The specific polar functional groups ( OH, OCH 3 and C O C ) in GPE cooperate to enhance the lithium salt dissociation, anion immobilization and lithium ion transporting and enable the high Li + transference number (0.902) and ion conductivity (4.36 × 10 -3 S cm -1 ). The assembled Li/GPE/LiFePO 4 coin cells possess high initial discharge capacity of 150.6 mA h g -1 and a high capacity retention of 91.6 % after 100 cycles.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POLYMERS AND THE ENVIRONMENT
·
2020
·Vol. 28
·期 8
·2199-2210
·
IF 2.572
Pei Ruihan,Li Qiqi,Liu Jianting,Yang Guifang,Wu Qiong,Wu Minya,Tong Shengxuan,Lv Yuancai,Ye Xiaoxia,Liu Yifan,Liu Minghua
Abstract Removal of low content of Cr(VI) from water is a critical challenge for water environment protection. Herein, an acrylamide-thiosemicarbazide cellulose aerogels (ATC) was designed by dissolving, grafting and freeze-drying to introduce thiosemicarbazide onto acrylamide-cellulose aerogels (AMC) via Schiff based reaction. The resultant ATC was further employed as an efficient adsorbent to remove low content of Cr(VI) from wastewater by adsorption and reduction. The SEM, FT-IR, and BET results showed that the ATC was composed of well-developed pore structure and owned functional groups such as –NH 2 , C–S and C=S groups. Experimental results indicated that ATC exhibited excellent removal efficiency for 99% under low initial concentration (0.1–10 mg/L). The adsorption isotherms demonstrated ATC adsorbent according to a monolayer adsorption behavior following the Langmuir model with a calculated maximum adsorption capacity of 83.40 mg/g at pH 3, and the adsorption kinetics well obeyed the pseudo-first-order kinetic model. Importantly, the maximum effluent concentration of Cr(VI) was lower than 0.045 mg/L, meeting the standard of WHO (50 μg/L). Furthermore, the main removal mechanisms involved the synergistic effect of electrostatic interactions, reduction and chelation between the positively charged functional groups of adsorbent and the anionic Cr(VI) ions. Graphic Abstract
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2020
·
IF 4.389
Hong Li,Jianhua Zhou,Jiaojiao Zhao,Yannan Li,Kun Lu
Cellulose nanocrystals-armored fluorinated polyacrylate latex particles with the core-shell spherical shape were prepared by a facile and efficient strategy based on Pickering emulsion polymerization using the modified cellulose nanocrystals, poly(2-(dimethylamino) ethyl methacrylate)- g -cellulose nanocrystal- g -poly(2,2,3,4,4,4-hexafluorobutyl acrylate) (PDMAEMA- g -CNC- g -PHFBA) as a sole Pickering stabilizer. The TEM result indicated that PDMAEMA- g -CNC- g -PHFBA effectively anchored on the outside of latex particles and improved the performance of emulsions, demonstrating the important role of the PDMAEMA- g -CNC- g -PHFBA in the Pickering stabilization process. The influences of the type of Pickering stabilizers and the PDMAEMA- g -CNC- g -PHFBA amount on the emulsion polymerization were investigated. The size of latex particles could be adjusted by PDMAEMA- g -CNC- g - PHFBA amount. XPS result showed that the fluorine-containing groups tended to enrich at the air-film interface of latex film during the heat process, leading to the decrease of surface free energy. The water-oil repellent and mechanical properties of the film could be improved as the content of PDMAEMA- g -CNC- g -PHFBA increased. In addition, thermal analysis showed an enhancement of the thermal properties of latex film upon increasing the PDMAEMA- g -CNC- g -PHFBA content.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2020
·
IF 6.444
Yiming Chen,Liang Pang,Yang Li,Heng Luo,Gaigai Duan,Changtong Mei,Wenhui Xu,Wei Zhou,Kunming Liu,Shaohua Jiang
Exploring an electromagnetic interference (EMI) shielding material with lightweight, flexible and easy fabricating process to deal with the increasingly serious electromagnetic environment pollution has become a current developing trend. Here, we reported a novel cellulose nanofiber (CNF)/silver nanowire (AgNW) conductive paper with a distinctive hierarchical structure by a facile “blending-filtration-peeling” process. Results showed that the obtained paper with a thickness of ~40 μm exhibited excellent tensile strength of ~49.1 MPa, a low percolation threshold of 1.4 vol% AgNWs, no significant changes in electrical conductivity after 2000 bending. The outstanding synergy between green CNFs and AgNWs endowed the paper with high EMI shielding effectiveness of up to 39.3 dB in X band and effective shielding effects on electromagnetic signals for realistic mobile phone communication. The special CNF/AgNW papers are expected to broaden new application fields as electronic devices e.g. flexible electronic components or effective ultra-thin EMI shielding materials for daily demands.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2020
·
IF 7.182
Xin Zhang,Bo Wang,Xiuming Qin,Shihang Ye,Yutao Shi,Yuezhan Feng,Wenjuan Han,Chuntai Liu,Changyu Shen
Eco-friendly cellulose acetate (CA) monolith with novel hierarchical micro/nano-porous structure was successfully fabricated via a simple thermally impacted nonsolvent induced phase separation (TINIPS) method. Based on the unique three-dimensional (3D) hierarchical porous structure, CA monolith revealed a high porosity (92.1%), excellent hydrophobicity (water contact angle of 147°) and superoleophilicity (oil contact angle of 0°). As a result, the porous monolith could selectively and efficiently adsorb various oils and organic solvents from oil/water mixtures with high saturation adsorption capacity ( Q m ) of 6.59−15.03 g g −1 . Besides, the monolith exhibited outstanding environmental stability in different pH (1–14), temperature (0−70 °C) and turbulent environments with almost unchanged hydrophobicity and Q m . Besides, CA monolith also showed a continuous oil/water separation ability to purify the polluted water by using a pump-assisted system, revealing a great potential for controlling ocean oil pollution.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2020
·Vol. 137
·期 44
·49350
·
IF 2.52
Feifei Gao,Mingli Jiang,Wencheng Liang,Xiangchen Fang,Fudong Bai,Yan Zhou,Meidong Lang
In this study, a kind of novel composite nanofibrous mats with cellulose diacetate-graft-poly(ethylene terephthalate) (CDA- g -PET) and Type I collagen were obtained by electrospinning and five different ratios of CDA -g- PET/Type I collagen (1:0, 1:0.1, 1:0.2, 1:0.3, 1:0.4) were set to explore the effects of components on its properties. The scanning electron microscope images demonstrated that the formation of uniform and smooth nanofibers with free beads. Compared with pure CDA -g- PET mats, the composite materials transformed into hydrophilic ones with increasing the content of Type I collagen. Moreover, the tensile strength of the composite nanofibrous mats got higher, while its water vapor transmission rate got lower after blending with Type I collagen. In addition, the cell proliferation and adhesion on composite nanofibrous mats were improved according by the results of bone marrow mesenchymal stem cells (BMSCs) culturing experiments. Especially, the cells growth attained optimum when the CDA -g- PET/Type I collagen ratio reached 1:0.3 and 1:0.4, where showed no significant difference. In consequence, the above results indicated that the novel composite nanofibrous mats consisted of CDA -g- PET and Type I collagen obtained by electrospinning combined good mechanical strength of CDA -g- PET and excellent biological functions of Type I collagen. The nanoscale structure might mimic the nanofibrous extracellular matrix feature, which present the potential use in cells culture.
✓ 已验证
产品关联
DOI
高影响因子