文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3157至3168个,产品总数5,784个

切换升序
chitosan
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A · 2019 ·Vol. 107 ·期 8 ·1615-1627 · IF 3.221

Preparation and properties of dopamine-modified alginate/chitosan–hydroxyapatite scaffolds with gradient structure for bone tissue engineering

Dongjian Shi,Jiali Shen,Zhuying Zhang,Chang Shi,Mingqing Chen,Yanglin Gu,Yang Liu

Three-dimensional (3D) homogenous scaffolds composed of natural biopolymers have been reported as superior candidates for bone tissue engineering. There are still remaining challenges in fabricating the functional scaffolds with gradient structures to similar with natural bone tissues, as well as high mechanical properties and excellent affinity to surround tissues. Herein, inspired by the natural bone structure, a gradient-structural scaffold composed of functional biopolymers was designed to provide an optimized 3D environment for promoting cell growth. To increase the interactions among the scaffolds, dopamine (DA) was employed to modify alginate (Alg) and needle-like nano-hydroxyapatite (HA) was prepared with quaternized chitosan as template. The obtained dopamine-modified alginate (Alg-DA) and quaternized chitosan-templated hydroxyapatite (QCHA) were then used to fabricate the porous gradient scaffold by “iterative layering” freeze-drying technique with further crosslinking by calcium ions (Ca 2+ ). The as-prepared Alg-DA/QCHA gradient scaffolds were possessed seamlessly integrated layer structures and high levels of porosity at around 77.5%. Moreover, the scaffolds showed higher compression modules (1.7 MPa) than many other biopolyermic scaffolds. The gradient scaffolds showed appropriate degradation rate to satisfy with the time of the bone regeneration. Both human chondrocytes and fibroblasts could adhesive and growth well on the scaffolds in vitro . Furthermore, an excellent osteogenetic activity of the gradient scaffold can effectively promote the regeneration of the bone tissue and accelerate the repair of the bone defects in vivo , compared with that of the scaffold with the homogenous structure. The novel multilayered scaffold with gradient structure provided an interesting option for bone tissue engineering. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1615–1627, 2019.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2019 · IF 4.784

Synthesis of superabsorbent polymers based on chitosan derivative graft acrylic acid-co-acrylamide and its property testing

Shixin Fang,Guangjian Wang,Ronge Xing,Xiaolin Chen,Song Liu,Yukun Qin,Kecheng Li,Xueqin Wang,Rongfeng Li,Pengcheng Li

A new kind of eco-friendly superabsorbent polymer was successfully synthesized using (2-pyridyl) acetyl chitosan chloride (PACS), acrylic acid (AA) and acrylamide (AM) in aqueous solution by a free radical polymerization. The effect of different reaction conditions, such as the initiator content, crosslinker content and PACS content were investigated. And the water retention, salt tolerance and reuse ability were investigated too. The chemical structure and morphological characterizations of the superabsorbent polymer were investigated by Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Thermogravimetric analysis (TGA) and Scanning electron microscope (SEM). The results showed that the novel superabsorbent polymer exhibits excellent water absorbency, which can absorb distilled water 615 g/g and 0.9% NaCl solution 44 g/g. At the same time, this product showed excellent water retention and reusability. The antibacterial properties of the superabsorbent polymers were tested too. The introduction of antibacterial groups also enhances antibacterial properties against Escherichia coli and Staphylococcus aureus . This kind of superabsorbent polymer has a broad application prospect.

CAS / MDL: 110-26-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL POLLUTION · 2019 · IF 5.714

Spectroscopic investigation of Cu2+, Pb2+ and Cd2+ adsorption behaviors by chitosan-coated argillaceous limestone: Competition and mechanisms

Zhen Zhang,Shuran He,Yulong Zhang,Kun Zhang,Jinjin Wang,Ran Jing,Xingjian Yang,Zheng Hu,Xiaojing Lin,Yongtao Li

In the present study, the competitive adsorption of Cu 2+ , Pb 2+ , and Cd 2+ by a novel natural adsorbent (i.e., argillaceous limestone) modified with chitosan (C-AL) was investigated. The results demonstrated that both intraparticle diffusion and chemisorption marked significant contributions to the Cu 2+ adsorption process by both raw argillaceous limestone (R-AL) and C-AL in mono-metal adsorption systems. Antagonism was found to be the predominant competitive effect for Cu 2+ , Pb 2+ and Cd 2+ adsorptions by C-AL in the multi-metal adsorption system. The three-dimensional simulation and FTIR analysis revealed that the presence of Cu 2+ suppressed Pb 2+ and Cd 2+ adsorptions, while the effect of Cd 2+ on Cu 2+ and Pb 2+ adsorptions was insignificant. The spectroscopic analyses evidenced that amide groups in C-AL played a crucial role in metal adsorption. The preferential adsorptions of Pb 2+  > Cu 2+  > Cd 2+ were likely due to the different affinities of the metals to the lone pair of electrons on the N atom from the amide groups and/or the O atoms from the –OH and -COO - groups on C-AL. The interactions between C-AL and metal ions and between various metal species influenced their competitive adsorption behaviors. C-AL exhibited a superior metal adsorption capacity in comparison with that the capacities of other natural adsorbents reported during the last decade, suggesting its potential practical applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
RSC Advances · 2019 ·Vol. 9 ·期 27 ·15196-15204 · IF 3.049

Hepatitis B virus S gene therapy with 10-23 DNAzyme delivered by chitosan-g-stearic acid micelles

Yun Hong,Dongsen Mao,Rui Wu,Zhe Gao,Tingting Meng,Rongrong Wang,Lin Liu,Jing Miao

DNAzymes have the potential to suppress gene expression through sequence-specific mRNA cleavage and can therefore play an important role in various gene therapies. Hepatitis B virus (HBV) is still one of the most serious liver infections in people around the world and is difficult to treat. We previously designed a 10-23 DNAzyme called DrzBS, which targets HBV S gene expression, but this enzyme depends on exogenous delivery, and so its application has been limited. To overcome this limitation, we have now developed a chitosan-based nanocarrier (chitosan-g-stearic acid, CSO–SA) for intracellular delivery of DrzBS, then compared the inhibition effect of our CSO–SA/DrzBS complex to a common transfection reagent, Lipofectamine™ 2000/DrzBS, on hepatitis B surface antigen expression. The synthesized CSO–SA assembles into micelles in an aqueous solution and exhibits excellent cytoplasmic targeting, and could protect DrzBS from degradation by ribonuclease. CSO–SA/DrzBS showed a higher inhibition rate (IR) than Lipofectamine™ 2000/DrzBS. Moreover, at the same DrzBS concentration (1.2 μmol L−1), the maximum IR of CSO–SA/DrzBS micelles was 2.4-fold that of the Lipofectamine™ 2000/DrzBS complex, and held on for 96 hours. Compared with Lipofectamine™ 2000/DrzBS, CSO–SA/DrzBS achieved a higher HBV inhibition effect. This study demonstrates that CSO–SA micelles can serve as a potential vector for DrzBS and that CSO–SA/DrzBS micelles are a promising application for anti-HBV gene therapy.

CAS / MDL: 25952-53-8 129-00-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
MICROCHIMICA ACTA · 2019 ·Vol. 186 ·期 5 ·1-7 · IF 5.479

Colorimetric tyrosinase assay based on catechol inhibition of the oxidase-mimicking activity of chitosan-stabilized platinum nanoparticles

Deng Hao-Hua,Lin Xiu-Ling,He Shao-Bin,Wu Gang-Wei,Wu Wei-Hua,Yang Yu,Lin Zhen,Peng Hua-Ping,Xia Xing-Hua,Chen Wei

It is found that catechol inhibits the oxidase-mimicking activity of chitosan-protected platinum nanoparticles (Chit-PtNPs) by competing with the substrate for the active site of the Ch-PtNPs. The inhibition mechanism of catechol is different from that of ascorbic acid in that it neither reacts with O 2 •- nor reduces the oxidized 3,3′,5,5′-tetramethylbenzidine (TMB). Tyrosinase (TYRase) catalyzes the oxidation of catechol, thus restoring the activity of oxidase-mimicking Chit-PtNPs. By combining the Chit-PtNP, catechol, and TYRase interactions with the oxidation of TMB to form a yellow diamine (maximal absorbance at 450 nm), a colorimetric analytical method was developed for TYRase determination and inhibitor screening. The assay works in the 0.5 to 2.5 U·mL −1 TYRase activity range, and the limit of detection is 0.5 U·mL −1 . In our perception, this new assay represents a powerful approach for determination of TYRase activity in biological samples. Schematic representation of a colorimetric method for tyrosinase (TYRase) detection and inhibitor screening. It is based on the fact that catechol can inhibit the oxidase-like activity of chitosan-stabilized platinum nanoparticles (Ch-PtNPs) by competing with the substrate for the active sites and TYRase can catalyze the oxidation of catechol.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMOSPHERE · 2019 · IF 5.108

Removal of copper and cadmium ions from alkaline solutions using chitosan-tannin functional paper materials as adsorbent

Haodong Sun,Nannan Xia,Zhongming Liu,Fangong Kong,Shoujuan Wang

We successfully absorbed the copper ion (Cu 2+ ) and cadmium ion (Cd 2+ ) from alkaline aqueous solutions using the prepared chitosan-tannin (CTS/TA) functional paper as absorbent materials. The kinetics of the adsorption, the adsorption isotherms, and the influence of the solution flow rate and pH were investigated detailly. The adsorption data were described well by Langmuir isotherms, with maximum copper (Cu 2+ ) and cadmium (Cd 2+ ) adsorption capacities of 684.93 and 813.01 mg/m 2 , respectively. The experimental results also showed that the adsorption of these heavy metals was selective in the order of Cu 2+  > Cd 2+ , as Cu 2+ competed with Cd 2+ for bonding sites at solution concentrations greater than or equal to 200 mg/L. The results of this study illustrated that the chitosan-tannin functional paper materials mainly followed a complexation-adsorption model, and the best adsorption capacity was achieved at pH = 9. The desorption of heavy ions from this adsorbent and its reusability of functional paper was also involved. Therefore, this novel, environment-friendly functional paper can surely act as an effective adsorbent for the removal and recovery of heavy metals in alkaline aqueous solutions.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Polymers · 2019 ·Vol. 11 ·期 8 ·1293 · IF 3.164

TiO2-Doped Chitosan Microspheres Supported on Cellulose Acetate Fibers for Adsorption and Photocatalytic Degradation of Methyl Orange

Xuejuan Shi,Xiaoxiao Zhang,Liang Ma,Chunhui Xiang,Lili Li

Chitosan/cellulose acetate (CS/CA) used as a biopolymer systema, with the addition of TiO2as photocatalyst (C-T/CA) were fabricated by alternating electrospinning/electrospraying technology. The uniform dispersion of TiO2and its recovery after the removal of methyl orange (MO) was achieved by incorporating TiO2in CS electrosprayed hemispheres. The effects of pH values, contact time, and the amount of TiO2on adsorption and photocatalytic degradation for MO of the C-T/CA were investigated in detail. When TiO2content was 3 wt %, the highest MO removal amount for fiber membranes (C-T-3/CA) reached 98% at pH value 4 and MO concentration of 40 mg/L. According to the data analysis, the pseudo-second-order kinetic and Freundlich isotherm model were well fitted to kinetic and equilibrium data of MO removal. Especially for C-T-3/CA, the fiber membrane exhibited multiple layers of adsorption. All these results indicated that adsorption caused by electrostatic interaction and photocatalytic degradation were involved in the MO removal process. This work provides a potential method for developing a novel photocatalyst with excellent catalytic activity, adsorbing capability and recycling use.Keywords:TiO2;chitosan;electrospinning;electrospraying;methyl orange;photocatalytic degradation

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
MATERIALS CHEMISTRY AND PHYSICS · 2019 · IF 2.781

Dual-crosslinked alginate/carboxymethyl chitosan hydrogel containing in situ synthesized calcium phosphate particles for drug delivery application

Sugunya Potiwiput,Huaping Tan,Guoliang Yuan,Shengke Li,Tianle Zhou,Jianliang Li,Yang Jia,Dangsheng Xiong,Xiaohong Hu,Zhonghua Ling,Yong Chen

Dual-crosslinked alginate/carboxymethyl chitosan (CMC) based hydrogels containing in situ synthesized calcium phosphate (CaP) particles were developed by combining two physical crosslinking, the ionic crosslinking of alginate with divalent cation (Ca 2+ ), and the electrostatic interaction between cation of amino groups on CMC and anion of carboxyl groups on alginate. The calcium phosphate particles were in situ synthesized by using the excess Ca 2+ of ionic crosslinking. The developed hydrogels were investigated the rheological properties, swelling behavior, degradation, and drug released performance in both water-soluble and insoluble drug models. The results showed that the viscoelasticity and swelling capacity of dual-crosslinked hydrogels were enhanced comparing the single-crosslinked alginate-based hydrogel. The in situ gelation of the developed hydrogel provided the injectable ability and drug-encapsulated capacity. Beside, calcium phosphate, including hydroxyapatite (HAp) was in situ synthesized during the gelation. Biocompatibility of this injectable hydrogel was studied by encapsulation behavior of human adipose-derived stem cells (ASCs). With these qualities, the developed hydrogel may have potential for medical providers such as hydrogel injections and drug providers.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
POLYMERS FOR ADVANCED TECHNOLOGIES · 2019 ·Vol. 31 ·期 4 ·807-816 · IF 2.162

Chitosan-modified graphene oxide as a modifier for improving the structure and performance of forward osmosis membranes

Chun-Hui Du,Xin-Yi Zhang,Chun-Jin Wu

Chitosan (CS) with good hydrophilicity and charged property was used to modify graphene oxide (GO), the obtained GO-CS was used as a novel modifier to fabricate thin film composite forward osmosis (FO) membranes. The results revealed that the amino groups on CS reacted with carboxyl groups on GO, and the lamellar structure of the GO nanosheets was peeled off by CS, resulting in the reducing of their thicknesses. The GO-CS improved the hydrophilicity of polyethersulfone (PES) substrate, and their contact angles decreased to 64° with the addition of GO-CS in the substrate. GO-CS also increased the porosity of the substrate and surface roughness of FO membrane, thereby optimizing the water flux and reverse salt flux of FO membrane. The average water flux of the FO membrane reached the optimal flux of 21.34 L/(m 2 h) when GO-CS addition was 0.5 wt%, and further addition of GO-CS to the substrate would decrease the water flux of FO membrane, and the reverse salt flux also decreased to the lowest value of 2.26 g/(m 2 h). However, the salt rejection of the membrane increased from 91.4% to 95.1% when GO-CS addition increased from 0.5 to 1.0 wt% under FO mode using 1 mol/L sodium chloride (NaCl) solution as draw solution (DS). In addition, high osmotic pressure favored water permeation, and at the same concentration of DS, magnesium chloride (MgCl 2 ) exhibited better properties than NaCl. These results all suggested that GO-CS was a good modifier to fabricate FO membrane, and MgCl 2 was a good DS candidate.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2019 ·Vol. 9 ·期 46 ·26676-26684 · IF 3.049

Chitosan-based activated carbon as economic and efficient sustainable material for capacitive deionization of low salinity water

Qinghao Wu,Dawei Liang,Xiumei Ma,Shanfu Lu,Yan Xiang

Capacitive deionization (CDI) is a novel low-energy green desalination technology that has attracted much attention in recent years, especially for the desalination of low salinity water. One of the key issues in CDI is the electrode materials, and many efforts have been devoted to developing materials with high specific surface areas, appropriate pore distributions, and good electronic conductivity, in order to obtain a high salt adsorption capacity. In this study, chitosan was selected as a precursor for the preparation of high-performance chitosan-based activated carbon (CTS-AC) for use in CDI electrodes via pyrolysis and KOH activation. The results show that CTS-AC800 (activated at 800 °C) has the largest BET specific surface area (2727 m2 g−1), and exhibits an appropriate pore size distribution (<10 nm), nitrogen doping (2.0%) and good electronic conductivity (2.09 S cm−1). The CDI performance results show that the CTS-AC800 electrode has a saturated salt adsorption capacity of 14.12 mg g−1 in a 500 mg L−1 NaCl solution and retains 95% capacity after 150 adsorption–desorption cycles. Thus, chitosan is a promising, sustainable precursor for CDI electrode materials.

CAS / MDL: 9012-76-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CARBOHYDRATE POLYMERS · 2019 · IF 6.044

pH-sensitive carboxymethyl chitosan hydrogels via acid-labile ortho ester linkage as an implantable drug delivery system

Jialu Gao,Yong Xu,Yan Zheng,Xin Wang,Shuting Li,Guoqing Yan,Jun Wang,Rupei Tang

A series of pH-sensitive carboxymethyl chitosan (CMCS) hydrogels were prepared via ortho ester linkage. DOX-loaded gelatin nanoparticles with an average diameter of around 50 nm were incorporated into hydrogels to obtain hybrid hydrogels (DOX-NPs-Gel), which could be locally implanted into tumor site in any shape. The physicochemical and mechanical properties of these hydrogels could be easily controlled by adjusting the proportion of crosslinking agent. DOX-NPs-Gel showed the pH-dependent degradation and drug release, and only 29.9% of DOX was released within 144 h at pH 7.4, while the cumulative release reached 49.3% and 65% at pH 6.5 and 5.0, respectively. In vivo study demonstrated that the implanted DOX-NPs-Gel efficiently improved DOX accumulation in tumor site through continuously degradation in mildly acidic environment of tumor tissues, and the tumor volume at the end of experiment was only 81.53 mm 3 , while tumor size reached to 229.22 mm 3 and 174.15 mm 3 after intravenous treatment with free DOX and DOX-NPs, respectively.

CAS / MDL: 9000-70-8 149-73-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
RSC Advances · 2018 ·Vol. 8 ·期 24 ·13370-13387 · IF 2.936

Fast removal of Co(II) from aqueous solution using porous carboxymethyl chitosan beads and its adsorption mechanism

Wenqiang Luo,Zhishan Bai,Yong Zhu

Porous carboxymethyl chitosan (PCMC) beads were synthesized via ionic coacervation/chemical crosslinking, using polyethylene glycol (PEG) as a porogen and calcium chloride and glutaraldehyde as physical and chemical cross-linkers. The as-synthesized PCMC beads were characterized using SEM, EDS, BET, TGA, FTIR and XPS analysis and then tested for the removal of Co(II) from aqueous solution. The effects of the initial pH, Co(II) concentration and temperature were investigated. It was found that the adsorption equilibrium is reached within 6 h and the maximum adsorption capacity is 46.25 mg g−1. In addition, the kinetics and equilibrium data are well described by pseudo-second-order kinetics and the Langmuir isotherm model. Moreover, the desorption and re-adsorption performance was also studied, and the results revealed that the prepared new adsorbent still showed good adsorption performance after five cycles of regeneration. Finally, the adsorption mechanism, including chemical and physical adsorption, was proposed on the basis of the microstructure analysis, adsorption kinetics and isotherm results, and chemical adsorption was found to be the main adsorption mechanism during the process of the removal of Co(II).

CAS / MDL: 9004-32-4 9085-26-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。