文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3169至3180个,产品总数5,005个

切换升序
4
IONICS · 2023 · IF 2.8

Effects of the Mn/Ni ratio on the battery performance of layered Na-Ni-Mn oxide cathode materials in sodium-ion batteries

Xiao Qingmei,Guo Ziting,Huang Jinchao,Zhong Shengwen

The development of efficient sodium-ion batteries is essential to overcome the issue of limited lithium sources for preparing lithium-ion batteries. Layered Mn-based cathode materials have significant application potential because of their simple structure and high specific capacities. Serious voltage attenuation and phase transition are the prominent problems of layered manganese-sodium ion batteries. To eliminate these issues, in this study, we investigated the effects of different Mn/Ni ratios in Na-Ni-Mn cathode materials on their structural stability and electrochemical performances. Na 0. 8MnO 2 (NNM-8010), Na 0.8 Ni 0.1 Mn 0.9 O 2 (NNM-819), Na 0.8 Ni 0.2 Mn 0.8 O 2 (NNM-828), and Na 0.8 Ni 0.3 Mn 0.7 O 2 (NNM-837) were synthesized and characterized using X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, and electrochemical analyses. The addition of Ni 2+ increased the Mn oxidation state from + 3 to + 4, thus reducing the Jahn–Teller effect of Mn 3+ and stabilizing the material structure. NNM-819 exhibited the best electrochemical performance. Its initial discharge-specific capacity was 198.5mAh g −1 at a current density of 0.2C, and the capacity retention rate after 100 cycles was 86.9% at 0.5C. Moreover, its capacity retention rate at 1.0C high-rate cycling after 100 cycles remained high 81.9%. Graphical Abstract

CAS / MDL: 1313-99-1 497-19-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2023 ·Vol. 58 ·期 41 ·16019-16032 · IF 4.5

Facile fabrication of amorphous NiFeP nanosheets to promote urea oxidation reaction for energy-saving hydrogen production

Cao Junhui,Wang Guanglong,Hou Shusen,Yu Weixin,Yang Zhijun,Wu Yihui

Although Urea oxidation reaction (UOR) with favorable thermodynamic potential has been well-acknowledged as a feasible alternative to slow oxygen evolution reaction for hydrogen production through water splitting, but the shortage of low-cost and high efficiency electrocatalysts restricts its practical development. In this research, a free-standing nickel–iron-phosphide (NiFeP) nanosheets electrocatalysts on nickel foam is synthesized by electrodeposition method. The presence of phosphide (P) causes nickel–iron (NiFe) to evolve from crystalline to amorphous structures. The NiFeP electrocatalysts with nanosheets structure exhibit reliable electrocatalytic activities toward UOR with small potential of 1.397 V at 10 mA cm −2 , low Tafel slope of 60.1 mV dec −1 and outstanding catalytic stability in 1.0 M KOH with 0.33 M urea solution. More impressively, the electrochemical activation energy (E a ) of UOR for the NiFeP electrocatalyst (35.6 kJ mol −1 ) is much lower than that of NiFe electrocatalyst (52.1 kJ mol −1 ). The phosphorus doping triggers the electronic structure of Ni and Fe site reconstruction, which is conducive to accelerating charge and mass transport, and then contributes to the enhanced electrocatalytic performance. Furthermore, the formation of amorphous structure and nanosheets structure by the incorporation of phosphorus contributes to the improved intrinsic activity of NiFeP for UOR.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POLYMER RESEARCH · 2023 ·Vol. 30 ·期 11 ·1-15 · IF 2.8

Synthesis of a single-component intumescent flame retardant and its high efficiency in imparting flame retardancy to polylactic acid

Yin Nian,Chen Yuhan,Wang Yunfei,Gao Shanjun,Shen Chunhui

In this paper, a single-component intumescent flame retardant di-(3-aminopropyltriethoxysilane) spirocyclic pentaerythritol diphosphate (PDAP) was synthesized, imparting flame retardancy to polylactic acid (PLA), which using melt blending process. The chemical structure and thermal stability of PDAP were characterized by test methods such as Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The fire retardancy of PLA/PDAP was evaluated by test methods such as limiting oxygen index (LOI) and vertical burning test (UL-94). The thermal stability of PLA/PDAP was studied by TGA and thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR). According to the results of laser Raman spectroscopy (LRS) and FTIR, the possible flame retardant mechanism of PLA/PDAP was discussed. With only 20 wt% addition of PDAP, PLA/PDAP could achieve 11.98% char residues at 800 °C. The LOI value of PLA/PDAP achieved 37%, UL-94 test reached V-0 rating. And higher fireproof performance with 62.1% reduced peak heat release rate (PHRR), 36.8% reduced total heat release rate (THR) and 19.5% reduced average effective combustion heat (av-EHC) value than PLA. The results show that PDAP has remarkable flame retardant effect on PLA, which provides an excellent research case for flame retardant modification of PLA plastic products.

CAS / MDL: 919-30-2 126-58-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Bio-Design and Manufacturing · 2023 · IF 7.9

Highly specific characterization and discrimination of monosodium urate crystals in gouty arthritis based on aggregation-induced emission luminogens

Wang Wenjuan,Zhang Guiquan,Chen Ziyi,Xu Hanlin,Zhang Bohan,Hu Rong,Qin Anjun,Hua Yinghui

Existing technologies used to detect monosodium urate (MSU) crystals for gout diagnosis are not ideal due to their low sensitivity and complexity of operation. The purpose of this study was to explore whether aggregation-induced emission luminogens (AIEgens) can be used for highly specific imaging of MSU crystals to assist in the diagnosis of gout. First, we developed a series of luminogens (i.e., tetraphenyl ethylene (TPE)-NH 2 , TPE-2NH 2 , TPE-4NH 2 , TPE-COOH, TPE-2COOH, TPE-4COOH, and TPE-Ketoalkyne), each of which was then evenly mixed with MSU crystals. Next, optimal fluorescence imaging of each of the luminogens was characterized by a confocal laser scanning microscope (CLSM). This approach was used for imaging standard samples of MSU, hydroxyapatite (HAP) crystals, and mixed samples with 1:1 mass ratio of MSU/HAP. We also imaged samples from mouse models of acute gouty arthritis, HAP deposition disease, and comorbidities of interest. Subsequently, CLSM imaging results were compared with those of compensated polarized light microscopy, and we assessed the biosafety of TPE-Ketoalkyne in the RAW264.7 cell line. Finally, CLSM time series and three-dimensional imaging were performed on MSU crystal samples from human gouty synovial fluid and tophi. As a promising candidate for MSU crystal labeling, TPE-Ketoalkyne was found to detect MSU crystals accurately and rapidly in standard samples, animal samples, and human samples, and could precisely distinguish gout from HAP deposition disease. This work demonstrates that TPE-Ketoalkyne is suitable for highly specific and timely imaging of MSU crystals in gouty arthritis and may facilitate future research on MSU crystal-related diseases. Graphic abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Inorganic and Organometallic Polymers and Materials · 2023 · IF 4

Polymeric Micelles with Chiral Diamine-Ru(II) Catalysts for Asymmetric Transfer Hydrogenation of Ketones in Water

Zhou Lianpei,Ji Peipei,Wang Xiuwu,Qi Dongming,Chen Tao

Chiral aromatic alcohols with unique structures have attracted wide attention in asymmetric catalysis for decades. In this study, polymeric micelles with chiral diamine-Ru(II) catalysts in the hydrophobic core for asymmetric transfer hydrogenation of ketones affording chiral aromatic alcohols were presented. Firstly, block copolymers with (1R,2R)-(+)-1,2-diphenyl ethylenediamine (DPEN) in the pendant chain were successfully synthesized by Ring-Opening Metathesis Polymerization (ROMP) using 1,1-dimethyl ethyl N-(2-amino-1,2-diphenylethyl) carbamate (NB-DPEN-Boc) and polyethylene glycol (NB-PEG 2000 ) with norbornene groups as raw materials. The structures of block copolymers P(DPEN) -co- P(PEG 2000 ) were characterized by FT-IR and 1 H NMR. Next, Block copolymers with chiral DPEN ligand in the pendant chain coordinate with [RuCl 2 (p-cymene)] 2 to provide amphiphilic polymers with chiral diamine-Ru(II) catalyst. Then, the self-assembly of the amphiphilic polymers in water produced the polymeric micelles with chiral diamine-Ru(II) catalysts in the hydrophobic core. The particle sizes were found to be 65 nm by DLS analysis. The polymeric micelles as catalytic nanoreactors were successfully applied in the asymmetric transfer hydrogenation (ATH) of various ketones in water. The heterogenization of homogeneous catalysts and construction of catalysts for aqueous catalysis demonstrate potential application prospects in the preparation of chiral aromatic alcohols. Graphical Abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nano Research · 2023 · IF 9.9

Multi-functional and multi-scenario applications for MXene aerogels with synergistically enhanced asymmetric modules

Yao Junru,Zhou Jintang,Yang Feng,Peng Guiyu,Liu Yijie,Yao Zhengjun,Wu Fan,Zeng Haibo

The development of multifunctional materials and synergistic applications of various functions are important conditions for integrated and miniaturized equipment. Here, we developed asymmetric MXene/aramid nanofibers/polyimides (AMAP) aerogels with different modules using an integrated molding process. Cleverly asymmetric modules (layered MXene/aramid nanofibers section and porous MXene/aramid nanofibers/polyimides section) interactions are beneficial for enhanced performances, resulting in low reflection electromagnetic interference (EMI) shielding (specific shielding effectiveness of 2483 (dB·cm 3 )/g and a low R -value of 0.0138), high-efficiency infrared radiation (IR) stealth (ultra-low thermal conductivity of 0.045 W/(m·K) and IR emissivity of 0.32 at 3–5 µm and 0.28 at 8–14 µm), and excellent thermal management performances of insulated Joule heating. Furthermore, these multifunctional AMAP aerogels are suitable for various application scenarios such as personal and building protection against electromagnetic pollution and cold, as well as military equipment protection against infrared detection and EMI.

CAS / MDL: 101-80-4 1823-59-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2023 ·Vol. 14 ·期 1 ·1-10 · IF 16.6

Anomalous water molecular gating from atomic-scale graphene capillaries for precise and ultrafast molecular sieving

Zhang Qian,Gao Bo,Zhang Ling,Liu Xiaopeng,Cui Jixiang,Cao Yijun,Zeng Hongbo,Xu Qun,Cui Xinwei,Jiang Lei

The pressing crisis of clean water shortage requires membranes to possess effective ion sieving as well as fast water flux. However, effective ion sieving demands reduction of pore size, which inevitably hinders water flux in hydrophilic membranes, posing a major challenge for efficient water/ion separation. Herein, we introduce anomalous water molecular gating based on nanofiltration membranes full of graphene capillaries at 6 Å, which were fabricated from spontaneous π-π restacking of island-on-nanosheet graphitic microstructures. We found that the membrane can provide effective ion sieving by suppressing osmosis-driven ion diffusion to negligible levels (~10 –4 mol m –2 h –1 ); unexpectedly, ultrafast bulk flow of water (45.4 L m –2 h –1 ) was still functional with ease, as gated on/off by adjusting hydrostatic pressures within only 10 –2 bar. We attribute this seemingly incompatible observation to graphene nanoconfinement effect, where crystal-like water confined within the capillaries hinders diffusion under osmosis but facilitates high-speed, diffusion-free water transport in the way analogous to Newton’s cradle-like Grotthus conduction. This strategy establishes a type of liquid-solid-liquid, phase-changing molecular transport for precise and ultrafast molecular sieving.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MOLECULAR HISTOLOGY · 2023 · IF 3.2

Intra-articular delivery of geraniol encapsulated by pH/redox-responsive nanogel ameliorates osteoarthritis by regulating oxidative stress and inflammation

Pan Jun,Cai Youzhi,Zhang Chi,Xu Sanzhong

Osteoarthritis (OA) remains a challenging condition due to limited drug bioavailability within the avascular and dense cartilage matrix. This study introduces a pH/redox-responsive nanogel for enhanced delivery of geraniol in OA therapy. We investigated geraniol's role in preventing chondrocyte matrix degradation and designed a pH/redox-responsive nanogel as a delivery platform. Our methods included Western blot, histological staining, and immunohistochemistry. Geraniol treatment reduced Keap1 expression while elevating Nrf2 and HO-1 levels, effectively inhibiting cartilage matrix degradation. The pH/redox-responsive nanogel further enhanced geraniol’s therapeutic impact. Our study demonstrates that geraniol encapsulated within a pH/redox-responsive nanogel mitigates OA by regulating oxidative stress and inflammation. This innovative approach holds potential as an effective OA therapeutic strategy.

CAS / MDL: 79-10-7 56-85-9 106-24-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH · 2023 ·Vol. 30 ·期 51 ·110417-110430 · IF 5.8

Fabrication of electrospun cellulose/chitosan/ball-milled bone char membranes for efficient and selective sorption of Pb(II) from aqueous solutions

Du Xuan,Rashid Suraya Abdul,Abdullah Luqman Chuah,Rahman Norizah Abdul

Separation materials have received increasing attention given their broad applications in the management of environmental pollution. It is desired to balance the contradiction between high separation efficiency and selectivity of separation materials. The integration of ball-milled bone chars with electrospun membranes might achieve this balance. In this study, electrospun cellulose/chitosan/ball-milled bone char (CL/CS/MB) membranes were by well-dispersing ball-milled bone chars with nanoscale size (98.9–167.5 nm) and developed porosity (40.2–373.1 m 2 /g) in the electrospinning solvent. The synergistic integration of distributed MBs (5.4–31.5 wt.% of loading hydroxyapatite on the membrane matrix) allowed the efficient sorption of Pb(II) with fast kinetics (20.0 min), excellent capacity (219.9 mg/g at pH 5.0, T 298 K), and favorable selectivity coefficients (2.76–6.79). The formation of minerals was dominant for the selective sorption of Pb(II) by combining the spectral analysis and quantitative determination. The surface complexation with O-/reductive N-species, the cation exchange with inorganic Ca 2+ , the electrostatic attraction with deprotonated O − , and the cation-π coordination with the aromatic carbon via the π-electrons should be not ignored for the capture of Pb(II). This work demonstrated the feasibility of electrospun CL/CS/MB membranes as a promising candidate for the remediation of aquatic pollutants.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Cancer Nanotechnology · 2023 ·Vol. 14 ·期 1 ·1-19 · IF 5.7

Boosting nuclear-targeted photothermal-chemotherapy by NIR-responsive hybrid membrane camouflaged nanotherapeutics

Xing Xinyue,Zeng Yuying,Zhong Wanqing,Cheng Wendai,Zhou Chengxin,Lu Xiaoxu,Zhong Liyun

Background Engineering nanotherapeutics have been extensively studied for cancer therapy. However, the therapeutic efficacy is still severely restricted by biophysiological barriers and intracellular accumulation. Although the biomimetic nanoparticles have improved the former issue, there is almost no breakthrough in researches of intracellular transport. Herein, we proposed a NIR-responsive nuclear-targeted hybrid membrane biomimetic Prussian blue drug-loading nanotherapeutics (PB@DN@M). Results The hybrid membrane coating bestows nanotherapeutics tumor targeting and immune escape ability, thus promoting the tumor enrichment of PB nanotherapeutics. The nuclear targeting function triggered by NIR enhances the cellular internalization and nuclear entry efficiency, resulting in a superadditive effect for boosting photothermal-chemotherapy efficacy. Moreover, taking advantage of non-interference Raman properties of PB, we can track the location and distribution of nanotherapeutics, which is beneficial for guiding precise synchronization of photothermal-chemotherapy. The results revealed that this PB@DN@M presented a remarkable therapeutic efficacy and significantly inhibited the tumor growth up to 87.17%. Conclusions Therefore, this spatiotemporal controllable biomimetic nanotherapeutics will provide a new insight and strategy for specific targeted therapy of tumors.

CAS / MDL: 25316-40-9 10025-77-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CATALYSIS LETTERS · 2023 · IF 2.8

Ionic Liquid Functionalized Polymer as an Efficient Solid Acid Catalyst for the Esterification Between Methanol and Methylacrylic Acid

Bian Yuhang,Liu Junyang,Deng Senlin,Zhang Guoliang,Peng Zhijian,Li Chunshan

Achieving esterification of methacrylic acid and methanol under mild conditions is challenging but cost-effective. It is important to develop a catalyst with high catalytic activity and stable structure. Therefore, a novel solid acid catalyst (PVD-ILs) with high acid density (1.56 mmol/g), rich mesoporous structure and good dispersion of active sites was synthesized. The copolymer of 4-vinylbenzyl and divinylbenzene was used as skeleton structure. After the amino-functionalization by polyethyleneimine and quaternization by 1,3-propanesultone and trifluoromethanesulfonic acid, the catalyst was gained. These brilliant properties give the catalyst with high activity compared with other catalysts. In the optimal reaction condition, the conversion of methyl methacrylate reached 77.8%. Moreover, the kinetics of the esterification between methacrylic acid and methanol was investigated under the presence of PVD-ILs. The catalytic activity of PVD-ILs did not show a distinct decline after 4-time cycles. And the structure of spent catalyst did not exhibit a significant difference from the fresh catalyst, confirming the synthesized catalyst had good stability. Graphical Abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Chemistry Africa-A Journal of the Tunisian Chemical Society · 2023 · IF 2.6

Influence of ZnO Nanoparticle Size on Barrier Performance and Corrosion Protection of Poly(dimethylsiloxane)-Coated Q235 Steel in Chloride Environment: Bode and Computational Simulation Investigations

Arukalam Innocent O.,Uzochukwu Ikechukwu N.,Tüzün Burak,Dagdag O.,Oguzie Emeka E.

Ethylhexanoic acid-modified PDMS-ZnO nanocoatings containing varying dimensions of ZnO nanoparticles (30, 50 and 90 nm) were prepared. The main objective was to appraise the effect of varying dimensions of ZnO nanoparticles on the protective efficacy of ethylhexanoic acid-modified PDMS coating in aqueous solution of 3.5 wt% NaCl/ Pseudomonas aeruginosa . Barrier properties and anti-corrosion performance of the coatings were evaluated by electrochemical impedance spectroscopy (EIS). Computational simulation techniques [quantum chemical computation (QCC) via density functional theory (DFT) and molecular dynamics (MD) simulation] were employed to provide molecular/atomistic level information on the chemical molecules responsible for corrosion protection performance and their adsorption phenomena. EIS results showed that the coating containing 30 nm ZnO nanoparticles maintained high impedance values in the order of 10 9 magnitude throughout the immersion periods. The obtained results were validated by wettability, scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy results. The DFT calculations showed that PDMS and ethylhexanoic acid with energy gaps of 5.123 and 5.337 eV, respectively, are most responsible for the corrosion protection effect. The good adsorption of the coating containing 30 nm ZnO particles was validated by MD simulation result with adsorption energies (E ads ) of − 2.28 kcal/mol, suggesting it is most susceptible for hydrophilic interaction.

CAS / MDL: 1314-13-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。