JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Yang Sun,Fan Yang,Siyuan Sun,Kexin Wei,Ye Wang,Guang Ma,Junpu An,Junwei Yuan,Meitong Zhao,Jiahui Liu,Hongchen Liu,Yongfeng Li
Developing high-performance and low-cost electrodes for hydrogen and oxygen evolution reactions (HER and OER, respectively) represents a pivotal challenge in the field of water electrolysis. Herein, W doped NiFe LDH nanosheets (NiFe-W x /NF) were immobilized on nickel foam (NF) through one-step corrosion engineering, which induced the coexistence of α-Ni(OH) 2 and β-Ni(OH) 2 . The doping of large atomic radius W influenced the growth of crystal planes of Ni(OH) 2 , promoting the formation of α-Ni(OH) 2 , which results in large layer spaces and neatly arranged nanosheets structure. The optimized NiFe-W 0.5 /NF catalyst require potentials of only 69 to attain 10 mA/cm 2 for HER, and require overpotentials of 269 mV to reach 100 mA/cm 2 current density for OER, respectively. The W 6+ with high oxidation state can withdraw neighboring electrons from Ni, altering the adsorption energy of hydrogen intermediates, which improves the Volmer step and electrical conductivity in HER. And the large layer space of α-Ni(OH) 2 in NiFe-W 0.5 /NF can be contributed to accelerating the formation of high valence γ-NiOOH, which can accelerate OER kinetics. In addition, the NiFe-W 0.5 /NF catalyst also provides an overall water splitting activity of 780 mA/cm 2 current density at a cell voltage of only 1.90 V, and remains highly stable for over 70 h at 100 mA/cm 2 , which makes it a bifunctional efficient catalyst for water electrolysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Science China-Materials
·
2024
·
IF 6.8
Zhang Baichao,Cao Xuchuan,Suo Chao,Cui Jing,Duan Xiaochuan,Guo Shaohui,Zhang Xian-Ming
Utilizing plasmonic non-noble metal nanoparticles (NPs) for photocatalytic hydrogen evolution reaction is a significant step toward green energy production. However, optimizing the interface between non-noble metal NPs and semiconducting materials in metal-semiconductor composites remains challenging owing to the inevitable surface oxide layers of non-noble metal NPs because the surface oxide layers of non-noble metal NPs can suppress the transfer of photoinduced carriers, leading to poor photocatalytic performance. Herein, we propose a photoinduced interface activation strategy to reduce the number of oxide layers based on a dynamic charge-transfer mechanism under illumination conditions, with Bi NPs and a Ni-based metal-organic framework (MOF) selected as model materials. Under light illumination, the photoinduced charges and plasmonic hot electrons heavily pooled at the interface between the Bi NPs and Ni-MOF, resulting in the reduction of the oxide layer on the surface of Bi, thus attenuating its hindering effect on charge transfer. This phenomenon led to a dynamically enhanced carrier concentration in the Bi/Ni-MOF composite, with an outstanding photocatalytic hydrogen evolution rate of 5822 µmol g −1 h −1 achieved with the composite. The results of this study indicate that our strategy provides a new method for optimizing plasmonic non-noble metal Bi NPs with oxide layers.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry C
·
2025
·
IF 5.1
Yiran Sun,Sikai Dai,Yu Fan,Jiangyu Fang,Xingyue Zhou,Ruoqi Wang,Qixin Zhuang,Jun Qian,Peiyuan Zuo
The application of two-dimensional (2D) MXene nanomaterials in microwave absorption is severely limited due to their excessive conductive pathways caused by self-stacking and an inherent lack of magnetic loss. In this work, we developed length-tunable NPMO@MXene/Ni (PMNi) hybrids through dimensionality engineering and electrostatic self-assembly, converting the structure of MXene from 2D to one-dimensional (1D) configuration and loading them with magnetic nickel (Ni) nanosheets. The hollow, mesoporous structure of the aminofunctionalized periodic mesoporous organosilica (NPMO) matrix and the three-tier hierarchical structure of PMNi generated numerous heterogeneous interfaces, greatly enhancing interfacial polarization and dielectric loss capabilities. Furthermore, the overall electromagnetic parameters were optimized for impedance matching by regulating the NPMO microrod length. The experimental results and radar cross-section simulations revealed that all PMNi magnetic hybrids demonstrated impressive microwave absorption characteristics. Specifically, mainly depending on "2D-to-1D" dimensional reconstruction strategy, the PMNi-600 exhibited an impressive minimum reflection loss of -51.28 dB at a thickness of only 1.7 mm, with an effective absorption bandwidth of 5.16 GHz. This work presents a novel approach to enhance the microwave absorption performance of MXene-based materials through dimensional reconstruction strategy.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Xifei Yin,Yinghui Sun,Yanbin Zhang,Xiaolong Wang,Ying Li,Tong Xu,Jie Bai
Dry reforming of methane (DRM) is a chemical reaction with great potential to convert CH 4 and CO 2 into valuable syngas. However, catalyst deactivation due to sintering and coking is a major obstacle for practical applications. Here, we synthesized a hollow tubular Ni/La 2 O 3 -ES catalyst via electrospinning (ES) method that surpasses conventional Ni/La 2 O 3 catalysts in both activity and stability. The ES-driven architecture creates confinement-stabilized Ni nanoparticles with improved metal-support interaction and spatial uniformity, achieving 93 % CO 2 conversion and 85.0 % CH 4 conversion at 800 °C for 20 h of continuous operation, providing long-lasting performance with no accumulation of carbon deposition. The carbon removal ability is strengthened in the Ni/La 2 O 3 -ES catalyst as evidenced by the CH 4 -CO 2 -TPSR experiments. Ni/La 2 O 3 -ES catalyst prefer to produce more active intermediates b-HCOO* as indicated in in situ DRIFTS spectra. The b-HCOO* species served as the key reactive intermediate that facilitated both CO 2 activation and the oxidative transformation of CH 4 -derived carbonaceous intermediates on catalytic surface. Additionally, the catalyst prepared by electrospinning method promoted lattice oxygen release and oxygen vacancy formation, thereby exhibiting superior catalytic activity and stability.
✓ 已验证
产品关联
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
ZiJie Wang,Zheng Wang,Kai Xu,Lei Chen,ZiZeng Lin,YaLi Liu
Granular-activated carbon is a commonly used adsorbent in water treatment. It can be reused by regeneration when saturated, but there are limits to the number of regenerations in actual engineering. This study created a simple and economical treatment method allowing for the reuse of waste granular-activated carbon (WGAC) that approaches the regeneration limit. The adsorption kinetics, equilibrium, and thermodynamics of Ni(II) onto the treated waste granular-activated carbon (TWGAC) and the new granular-activated carbon (NGAC) were studied. The N 2 adsorption/desorption isotherms, zeta potential, SEM, energy-dispersive spectrometry and FTIR spectra were used to characterize and compare the NGAC and TWGAC. Analysis revealed that the structure of WGAC was severely damaged, but the adsorption capacity and adsorption mechanism after treatment were similar to those of NGAC. Experimental data showed that the pseudo-second-order kinetic model and the Freundlich isothermal model had high correlation coefficients (R 2 > 0.99). The maximum adsorption capacity of TWGAC and NGAC was 138.9 and 123.5 mg g –1 . Thermodynamic parameters, including the negative values ΔG, positive values ΔH, and positive value ΔS, indicated that the current adsorption processes of TWGAC and NGAC were feasible, spontaneous and endothermic. After three cycles, TWGAC’s removal rate for Ni(II) remained as high as 95.3%.
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2017
·Vol. 46
·期 32
·10620-10629
·
IF 4.029
Songsong Li,Dongsheng Dai,Lei Ge,Yangqin Gao,Changcun Han,Nan Xiao
Novel layer-like Ni(OH)2 co-catalyst-decorated ZnIn2S4 microsphere photocatalysts were synthesized for the first time via a facile in situ deposition method to boost the photocatalytic H2-production performance. The physical and optical properties of the as-prepared Ni(OH)2–ZnIn2S4 composite samples were characterized via X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffusion reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), and surface photovoltage spectroscopy (SPV). The results indicate that the photocatalytic H2 evolution activity of the ZnIn2S4 microspheres under visible light irradiation significantly enhances by introducing inexpensive Ni(OH)2 as a co-catalyst. The 5 mol% Ni(OH)2–ZnIn2S4 sample shows the highest H2-production rate of 8.35 mmol g−1 h−1, which is 18 times higher than that of pure ZnIn2S4. Moreover, photocatalytic activity of the Ni(OH)2–ZnIn2S4 sample remains stable even after 4 cycling photocatalytic experiments. In addition, a possible mechanism on the enhanced photocatalytic activity was proposed and verified by surface photovoltage spectroscopy.
✓ 已验证
DOI
高影响因子
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
·
2026
·
IF 6.7
Dexin Kong,Rui Shan,Shuxiao Wang,Huan Li,Haoran Yuan,Yong Chen
Converting plastic waste into hydrogen provides a promising route to simultaneously address environmental pollution and clean energy production. This study developed a Ni single-atom catalyst stabilized on an Al 2 O 3 /N-C composite support (Ni@Al 2 O 3 /N-C) for H 2 production from polypropylene (PP) via pyrolysis-catalytic reforming. The composite support integrates the high-temperature structural stability of Al 2 O 3 with the strong anchoring capability of N-doped carbon, enabling the formation of stable C-N-Ni active sites and effectively suppressing Ni aggregation under harsh reforming conditions. Under the optimal conditions (catalyst/PP = 1.25:1, water feed = 6 mL h −1 ), the catalyst achieved a gas yield of 127.59 mmol g −1 PP, a hydrogen yield of 84.14 mmol g −1 PP, and a hydrogen selectivity of 65.96%. The catalyst maintained good cyclic performance over 10 consecutive runs, with the H 2 yield decreasing from 84.14 to 69.39 mmol g −1 PP while the H 2 selectivity remained at 64.49% in the 10th cycle. XPS, HAADF-STEM, XRD, Raman, SEM, and TEM analyses confirmed that Ni remained atomically dispersed on the support after reaction, with no obvious nanoparticle agglomeration and only limited carbon nanotube formation. This work provides an effective support-engineering strategy for designing thermally stable single-atom catalysts for plastic reforming and other high-temperature catalytic processes.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Jiankun Li,Shang Wu,Quanlu Yang,Huize Zhang,Chenxu Zhu,Xiaoyi Meng,Xiaojun Yang,Qiong Su,Shuhe Kang,Juzhen Kang,Wei Lan
HS-FeNi-BNC is synthesized via B-bridging, with hollow porous carbon and Fe-B-Ni diatomic sites. • Fe-B-Ni bridge enables p-d hybridization to tune metal sites' electronic structures. • HS-FeNi-BNC delivers exceptional ORR/OER/HER electrocatalysis in alkaline media. • HS-FeNi-BNC-based ZABs operate from −10 to 60 °C with 92.9% Zn utilization efficiency. Rechargeable zinc-air batteries (ZABs) require efficient electrocatalysts to boost the sluggish oxygen reduction reaction (ORR)/ oxygen evolution reaction (OER) kinetics at the air cathode. However, designing high-activity catalysts faces considerable challenges due to spatial and electronic constraints. Herein, a boron-doped hollow spherical porous carbon (HS-FeNi-BNC) anchored with Fe-B-Ni diatomic sites is prepared via a facile B-bridging strategy, realizing the regulated construction of heteroatom doping and diatomic active sites. HS-FeNi-BNC possesses abundant micropores/mesopores, uniformly dispersed Fe Ni diatomic centers (0.27 nm spacing) with a Fe-B-Ni bridge structure, and topological carbon defects induced by B/N co-doping. HS-FeNi-BNC exhibits exceptional trifunctional electrocatalytic performance in alkaline electrolytes, with an ORR E 1/2 of 0.864 V, an OER overpotential of 308 mV and a hydrogen evolution reaction (HER) overpotential of 301 mV at 10 mA cm −2 . HS-FeNi-BNC-based ZABs achieve an outstanding wide-temperature operating range of −10 °C to 60 °C, a specific capacity of 761.51 mAh g −1 and a Zn utilization efficiency of 92.9%, outperforming Pt/C + RuO 2 -based ZABs. Density functional theory (DFT) calculations reveal that the Fe-B-Ni bridge structure triggers p-d orbital hybridization, regulating metal site electronic structures, optimizing reaction intermediate adsorption and accelerating interfacial electron transfer. This work advances the development of high-efficiency heteroatom-modified non-noble metal multifunctional catalysts. Download: Download high-res image (207KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2026
·
IF 5.7
Adila Abulimiti,Yudong Zhang,Yiyuan Hua,Yanjun Miu,Tong Zhou,Xuejing Zhang,Can Cui,Weiji Dai,Cuijiao Zhao,Saifang Huang
Mg/Zr/Nb tri-doping jointly stabilizes Ni-rich layered cathodes under harsh operating conditions. • Tri-doping reduces Li + /Ni 2+ mixing and stabilizes the transition-metal layer and oxygen framework. • MZN-NCM delivers excellent cycling stability at room temperature, high temperature, and high cutoff voltage. • Mg/Zr/Nb co-doping improves charge transfer and Li + diffusion, enhancing the durability of Ni-rich cathodes. Ni-rich layered cathode materials (LiNi x M 1-x O 2 , x ≥ 0.8) offer high capacity and high energy density, but their cycling stability severely suffers from Li + /Ni 2+ cation mixing, H2-H3 phase-transition strain, interfacial side reactions, and sluggish Li + transport, especially under harsh conditions such as elevated temperature and high cutoff voltage. In this work, a Mg/Zr/Nb tri-doping strategy is proposed to construct Li(Ni 0.9 Co 0.05 Mn 0.05 ) 0.97 Zr 0.01 Mg 0.01 Nb 0.01 O 2 (MZN-NCM) cathode for synergistic stabilization under different operating conditions. The results show that Mg/Zr/Nb co-doping regulates the Ni valence distribution, reduces Li + /Ni 2+ cation mixing, enhances the stability of the transition-metal layer and oxygen framework, and suppresses interfacial side reactions and CEI degradation during cycling. MZN-NCM retains 90.1% of its capacity after 100 cycles at 25 °C and 89.8% at 60 °C, compared with only 59.8% and 41.7% for Pristine-NCM, respectively. Under a high cutoff voltage of 4.5 V, MZN-NCM also maintains a higher capacity retention of 87.7% after 100 cycles. Moreover, kinetic and interfacial chemical analyses indicate that multielement doping improves both charge-transfer behavior and Li + diffusion, enabling a synergistic enhancement of structural stability, interfacial stability, and ion transport. This work demonstrates that Mg/Zr/Nb synergistic doping is an effective material-design strategy for extending the applicable operating conditions of Ni-rich cathodes.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 4.4
Li Xiaoguang,Chen Jia,Li Aoqi,Li Jing,Wang Mingyu,Li Liangsheng,Shangguan Enbo
A novel in situ self-sulfidation approach was devised to fabricate ZnO/ZnS/C ternary nanocomposites as highly stable anodes for alkaline Zn–Ni batteries. Zinc sulfate acted as a dual-purpose precursor, providing both zinc and sulfur, whereas acrylamide served as the carbon source and in situ reductant. In a single-step carbothermal pyrolysis at 800 °C, the carbon matrix converted sulfate ions to sulfide, facilitating the simultaneous generation of electrochemically active ZnO, a protective ZnS layer, and a conductive carbon network during a single thermal treatment. The optimized ZnO/ZnS/C-2 electrode exhibited a discharge capacity of 576.8 mAh g −1 after 600 cycles at 1 C and maintained 513.2 mAh g −1 at 15 C. Under identical conditions at 10C, the ZnO/ZnS/C-2 electrode delivered a capacity of 545.3 mAh g −1 , which is 41.5% higher than that of commercial ZnO (385.4 mAh g −1 ). Upon the current density reverting to 0.2 C, it regained 96.6% of its original capacity, indicating remarkable reversibility. Post-cycling scanning electron microscopy images validated the successful inhibition of zinc dendrite proliferation. The performance improvements arise from the synergistic combination of the protective ZnS layer, the interconnected conductive carbon framework, and the advantageous ZnO/ZnS heterointerface, which collectively boost structural stability and charge transfer kinetics.
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2026
·
IF 13.6
Jiangtong Li,Ziyu Ye,Chi Zhang,Chiu Shek Wong,Tai-Sing Wu,Xiang-Yi Yang,Yun-Liang Soo,Negar Irandoust,Ziyi Meng,Vincent C.-C. Wang,Ye Zhu,Molly Meng-Jung Li
Dry reforming of methane (DRM) demands catalysts that simultaneously resist coking and sintering at high temperature. Here, we show that sodium aluminate (NaAlO2) acts as a highly effective interfacial modifier, creating a functional Ni−NaAlO2 metal−support contact that couples reaction-relevant CO2 retention with robust Ni stabilization. Temperature-programmed desorption reveals that NaAlO2 retains CO2-derived species up to 700 °C, driven by the strong basicity of its ionic Na−Al−O lattice, while structural analysis confirms strong interfacial metal−support coupling that preserves the size of metallic Ni. In situ spectroscopy reveals a bifunctional perimeter pathway under DRM conditions, where these CO2-derived oxygen-containing species hosted on NaAlO2 efficiently oxidize CHx intermediates generated on adjacent metallic Ni sites. These coupled interfacial functions enable stable, near-coke-free DRM operation with suppressed Ni sintering for 110 h on stream, drastically outperforming a reference Ni/Al2O3 catalyst that deactivates via severe sintering, coking, and reactor blockage within 24 h. Crucially, NaAlO2 dissolves in water and undergoes reversible hydration/dehydration, enabling uniform post-synthetic deposition onto pre-formed Ni catalysts via a simple aqueous impregnation−drying step. We demonstrate that this modular interface incorporation successfully upgrades both a commercial Ni reforming catalyst and a reference Ni/Al2O3 catalyst without rebuilding the parent catalyst structures, significantly improving their coke and sintering resistance. Overall, this work establishes NaAlO2 as a deployable interfacial modifier for coupled CO2 handling and metal stabilization in practical reforming applications.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2026
·
IF 7.8
Bingshuo Li,Xinhang Lv,Tianhua Yang,Haijun Zhang,Xingping Kai,Rundong Li
Catalytic hydrodeoxygenation (HDO) is a promising strategy for upgrading phenolic bio-oil into cycloalkanes. Conventional catalysts often rely on strongly acidic supports, which tend to suffer from rapid deactivation. In this study, 4-ethylphenol was selected as a model compound derived from lignin bio-oil to investigate the effects of active sites on an inert support during the hydrogenation and deoxygenation of the phenolic group. Acid-site–support decoupling catalysts, denoted as Ni-HSiW/h-BN, were successfully prepared and were applied in the HDO of 4-ethylphenol to produce ethylcyclohexane. Using 0.5 g of 4-ethylphenol as the substrate and n-dodecane (30 mL) as solvent, the optimal reaction conditions were identified as a temperature of 300 °C, a reaction time of 3 h and the use of 15% Ni-HSiW 0.25 /h-BN catalyst. Under these conditions, complete conversion of 4-ethylphenol was achieved with 100% selectivity toward ethylcyclohexane. When the temperature was lowered to 180 °C and the reaction time reduced to 1 h using 15% Ni/h-BN, the main product shifted to ethylcyclohexanol with a selectivity of 94.4%. A reaction mechanism was proposed, indicating that the combination of Ni and HSiW synergistically enhances HDO efficiency.
✓ 已验证
产品关联
DOI
高影响因子