JOURNAL OF MATERIALS SCIENCE
·
2026
·Vol. 61
·期 22
·15756-15772
·
IF 4.4
Hu Jinming,Gao Yuxin,Jiang Yanfeng,Zhao Xinglong,Liu Lijia,Wang Yudan,Wang Guan,Wang Chao,Zhang Chunhong,Yang Guoxing
Polyhedral oligomeric silsesquioxane (POSS) combines the advantages of inorganic nanoparticles and organic flexible segments, enabling the enhancement of the comprehensive properties of epoxy resins. POSS grafted with organic groups can serve as a good toughening curing agent for epoxy resins. In this paper, D/A (polyetheramine D230/aniline) series and D/B (polyetheramine D230/n-butylamine) series co-grafted POSS toughening curing agents were prepared. A series of epoxy resins cured with different curing agents were further prepared. The influence of the structure of grafted small molecule amine and the ratio of polyetheramine/small molecule amine on the properties of cured epoxy resins was discussed. The research results indicated that cured epoxy resins exhibited excellent properties. The toughening effect of curing agent D/A4/OP is the best. Compared to epoxy resins cured with polyetheramine D230, the impact strength maximum increased from 46.3 to 78.2 kJ m⁻ 2 , an increase of 68.9%; the fracture toughness maximum increased from 15 to 24.8 kPa m 1 / 2 , an increase of 65.3%. The toughening curing agents combine the advantages of rigid POSS and flexible polyetheramine. By regulating the side chain structure, distribution, and grafting amount of grafted POSS, the toughness of epoxy resins has been significantly improved. This is due to the synergistic toughening effect of the three-dimensionally distributed flexible polyether segments and the rigid POSS particle structure within the co-grafted POSS. The epoxy resins cured with the toughening curing agents have great potential and applicability, with broad application prospects. Graphical The alternative text for this image may have been generated using AI.
✓ 已验证
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Xiaoting Ren,Bing Yan,Lewang Yuan,Dalong Zhang,Zong-Jie Guan,Yu Fang
Optimizing carrier dynamics to elevate photocatalytic efficiency represents a central goal in the design of photocatalysts; however, achieving this remains a daunting challenge within the research community. In this study, we have devised and synthesized four types of intramolecular heterojunctions (POM@MOFs), constructed by integrating polyoxometalates (POMs) with metal–organic frameworks (MOFs). Specifically, we utilized an organic linker featuring a photosensitive phenothiazine core with incrementally oxidized sulfur sites, and employed Zn/Cd as the metal nodes to create four analogous POM@MOF composites, designated as SO x -M ( x = 1, 2; M = Zn, Cd). Through strategic heterointerface engineering, we have achieved a synergistic improvement in both the generation and separation efficiency of charge carriers within these materials. Our results demonstrate that the SO 2 -M series, which incorporates phenothiazine in a more oxidized state (-SO 2 -), surpasses the SO-M series (-SO-) in terms of charge carrier generation and separation efficiency. Furthermore, within the SO 2 -Cd , the covalent bonds connecting the MOF and POM components significantly facilitate the separation and migration of photogenerated electrons. This collaborative regulatory mechanism enables SO 2 -Cd to exhibit outstanding photocatalytic performance. This research introduces a pioneering approach for the cooperative modulation of oxidation states and heterointerface interactions, offering a promising pathway for the development of highly efficient photocatalysts.
✓ 已验证
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Hongkun Wang,Hao Gu,Yixuan Zhang,Yang Wang,Bo Peng,Lei Zhang,Wenchao Zhan,Yifei Xu,Xianfen Wang,Zhonghua Zhang,Zhenyou Li
Titanium disulfide (TiS 2 ) is a promising layered cathode for sodium-ion batteries (SIBs), but suffers from rapid capacity fading, which was often ascribed to multi-step phase transitions. Herein, we demonstrated that solvent co‑intercalation that typically occurs at low Na + content plays a more decisive role in driving structural degradation by promoting lattice distortion and triggering layer delamination. By replacing the conventional solvent propylene carbonate with ethyl methyl carbonate (EMC), which is a linear carbonate with a lower dielectric constant and larger kinetic diameter, solvent uptake is significantly suppressed. Further improvement is achieved by introducing fluoroethylene carbonate (FEC) and increasing NaFSI concentration to 3 m in an EMC/FEC (9:1 v/v) blend. This formulation enables the formation of a uniform, thin cathode-electrolyte interphase, which is robust and rich in NaF that facilitates desolvation of Na + and further limits solvent co-intercalation. Consequently, the TiS 2 cathode delivers exceptional long-term cycling stability (88.9% capacity retention after 1200 cycles at 2000 mA g −1 ) and superior rate capability (75% capacity retention from 20 to 2000 mA g −1 ). Since solvent co-intercalation is a common issue in layered hosts during Na + intercalation, the insights and electrolyte design strategy presented here provide a generalizable approach to developing high-performance, durable cathodes for SIBs.
✓ 已验证
DOI
高影响因子
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
·
2026
·
IF 5.2
Ben Xu,Yue Wu,Xiao-Min Han,Zi-Yuan Liu,Yang-Yang Song,Ji-Yang Zhang,Tao Zhuang,Gui-Sen Zhang
Chronic pain affects more than 30% of people worldwide and represents a highly prevalent clinical problem. However, current analgesics are often limited by inadequate efficacy, serious adverse effects, and the need for frequent administration. Therefore, developing novel long-acting analgesics is crucial for the effective treatment of chronic pain. In this study, we synthesized four new co-prodrugs of non-steroidal anti-inflammatory drugs (NSAIDs) with the endogenous lipid palmitoylethanolamide (PEA), which were further prepared as nanocrystal (NC) formulations to achieve long-acting and enhanced antinociceptive effects. The chemical structures of co-prodrugs NSAIDs-PEA were characterized through HR-MS, and NMR spectroscopy. In mouse liver microsomal stability assays, these co-prodrugs were metabolized into two individual drugs. The NCs of co-prodrugs NSAIDs-PEA were prepared using the wet milling method and tween 80 as the only excipient. All prepared NCs were spherical and had a size between 100 and 200 nm, polydispersity index (PDI) ≤ 0.3 and Zeta potential values from −20 to −30 mV. In a rat model of chronic pain elicited by complete Freund's adjuvant (CFA), intramuscular administration of naproxen-palmitoylethanolamide (NAP-PEA) NCs produced a rapid onset of analgesia and sustained pain relief lasting up to 72 h. Moreover, NAP-PEA NCs had good biocompatibility and induced only a minor local inflammatory reaction, which gradually returned to normal within 5 days. These results indicated that NAP-PEA NCs provided a promising strategy for chronic pain treatment.
✓ 已验证
DOI
高影响因子
Journal of Energy Storage
·
2026
·
IF 10.7
Xinyu Cui,Peiqin Hong,Yang Jiao,Peng Hu,Haibo Fan,Feng Teng
Heterogeneous atomic doping is the mainstream way to enhance the electrochemical performance of porous carbon electrode materials. Herein, a three-dimensional honeycomb-like porous carbon material was synthesized by directly one-step carbonization-activation polyvinyl alcohol hydrogel method. In this study, a N, S co-doped porous carbon material was prepared by introducing thiourea during the hydrogel formation process. The as-synthesized product possesses a large specific surface area and a well-developed porous structure. Notably, the obtained N, S co-doped porous carbon delivers an excellent specific capacitance of 260.5 F g −1 at a current density of 1 A g −1 in a 6 M KOH electrolyte, along with outstanding cycling stability. These values are much higher than those of undoped porous carbon, single N-doped porous carbon, and single S-doped porous carbon. After 10,000 cycles, the material's specific capacitance retention remains stable, with a Coulombic efficiency approaching 100%. This work presents a facile and effective pathway for the electrode rational design of next-generation energy storage devices.
✓ 已验证
DOI
高影响因子
FOOD RESEARCH INTERNATIONAL
·
2026
·
IF 8.8
Yixia Zhou,Luqi Qin,Honglin Chen,Ziyi Chen,Jing Sun,Jia Yao,Bei Fan,Jiameng Liu
Probiotic fermentation is a viable strategy for simultaneously improving the bioactive compound profile and flavor characteristics of food matrices. Dendrobium officinale and a mixed-probiotic beverage ( L. plantarum : L. rhamnosus : L. reuteri = 5:1:4; 3.95% inoculum, 1:6.68 solid-liquid ratio, 37 °C, 82 h) were compared using HS-SPME-GC–MS with absolute quantification of key volatiles. Mixed-strain LAB fermentation significantly altered the volatile profile of D. officinale . This alteration was defined by an increase in pleasant aromatic compounds, such as linalool and benzyl alcohol, and fermentation-derived carbonyl compounds, concurrent with a decrease in solvent-like and alcoholic notes, including ethyl acetate and ethanol. Together, these chemical shifts form the basis for the more harmonious sensory perception reported after fermentation. It also decreased total sugars (64.00–15.16 mg/mL), phenolics (72.35–64.20 μg/mL) and flavonoids (106.85–84.57 μg/mL), accompanied by higher organic acid levels and sensory scores (58.02–68.45). Untargeted LC-MS metabolomics revealed that mixed-strain fermentation enhanced the hypoglycemic potential activity of D. officinale , as evidenced by increased α-GIR and α-AIR, along with improved protection of IR-HepG2 cells. This enhancement was associated with the depletion of readily fermentable sugars and a qualitative remodeling of the phenylpropanoid-flavonoid-isoflavonoid pathway. These changes were accompanied by coordinated shifts in starch and sucrose metabolism. The results indicate that mixed-probiotic fermentation enhances both flavor and bioactive constituents, providing a novel product format for this traditional D. officinale -based food.
✓ 已验证
DOI
PubMed
高影响因子
CARBON
·
2026
·
IF 12.7
He Wang,Liru Cui,Tiantian Ma,Zhaoxu Zhu,Wei Guo,Feng Zhang,Yanduo Liu
Biomass-derived carbon-based composites are widely recognized as prospective candidates for high-performance microwave absorbing materials (MAMs), leveraging synergistic electromagnetic loss mechanisms and charming structural effects. However, uneven distribution of heterogeneous components and complex preparation processes limit performance elevation and large-scale application. Herein, a novel “one-step gelation coupled with simultaneous pyrolysis” strategy is proposed to successfully prepare 3D porous Co/Mo 2 C/C aerogels using lotus root powder as carbon source. This strategy achieves in-situ reduction and carbonization of Co and Mo species, resulting in uniformly dispersed nanoparticles within carbon matrix. Mo 2 C nanoparticles serve as structural scaffolds to inhibit carbon framework collapse during pyrolysis, thus preserving 3D porous architecture. Sufficient heterogeneous interfaces among Mo 2 C, carbon, and Co notably enhance dielectric loss. Additionally, the introduced Co nanoparticles contribute magnetic loss and synergize with the porous structure to optimize impedance matching. By regulating the content of Mo 2 C, the optimized Co/Mo 2 C/C-2 demonstrates satisfactory microwave absorption performance. Its minimum reflection loss ( RL ) and effective absorption bandwidth ( EAB 10 ) can reach up to −64.5 dB and 4.8 GHz with a thickness of only 1.4 mm, along with a broad integrated EAB 10 of 14.7 GHz within a thickness range of 1.0 mm to 5.0 mm. Furthermore, the composite inherits bio-carbon's lightweight trait and exhibits decent hydrophobicity and thermal insulation, endowing it with adaptability and broad application potential in complex service environments. These merits make Co/Mo 2 C/C aerogels highly competitive for advanced electromagnetic protection and stealth applications in harsh and complex service environments.
✓ 已验证
DOI
高影响因子
Drug Delivery and Translational Research
·
2026
·
IF 6.9
Cao Ruijie,Zhou Rongwei,Wang Chuancui,Shen Meizhu,Yu Jiangyue,Xu Hao,Guo Zhong
Acute lung injury (ALI) is characterized by uncontrolled inflammation and oxidative stress, driven largely by macrophage dysregulation. Despite their anti-inflammatory potential, flavonoids like quercetin (Qu) are limited by poor solubility and systemic toxicity. To address these challenges, this study developed a “bioactive co-assembly” nanomicelle platform (Qu@PSA-VES/diT-VES) based on polysialic acid (PSA) and a novel dimerized taurine-vitamin E succinate (diT-VES). Molecular docking simulations demonstrated that quercetin (Qu) exhibits an exceptionally high binding affinity for the VES hydrophobic core. Furthermore, the incorporation of diT-VES significantly enhanced the colloidal stability of the micelles through strengthened non-covalent interactions, effectively preventing disassembly during physiological circulation. Hydrophobic interactions and hydrogen bonding were identified as the primary driving forces for micellar stability. The carrier leverages PSA to specifically target the overexpressed Siglec-1 receptor on the surface of inflammatory macrophages, thereby mediating receptor-dependent endocytosis. Within the acidic and enzyme-enriched lysosomal environment, the micelles undergo pH/enzyme dual-responsive dissociation, facilitating the escape of the drug from the lysosomal barrier and its subsequent diffusion into the cytoplasm for pharmacological action. Additionally, the carrier components VES and taurine provide antioxidant and mitochondrial protection, respectively, synergizing with Qu to significantly induce the reprogramming of M1 macrophages toward the M2 phenotype in vitro. In a murine ALI model, the system demonstrated superior lung-targeting ability, significantly reducing the levels of pro-inflammatory cytokines (TNF-α, IL-1β, and IL-6) in bronchoalveolar lavage fluid and alleviating pulmonary edema and neutrophil infiltration. Experimental results indicated that under a lethal ALI challenge, the 72-h survival rate of mice in the treatment group was significantly increased from 16.7% to 83.3%, while maintaining excellent in vivo biocompatibility. This integrated "targeting-stabilization-synergy" nanoplatform provides a promising translational strategy for the treatment of macrophage-driven inflammatory disorders.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Li Qiaozhen,Li Qianqian,Liu Siqin,Wu Lei,Liu Mingyang,Zhao Jincai,Zhang Yuchao
Inefficient charge separation and poor interfacial reaction selectivity constitute major barriers to semiconductor-driven photoelectrocatalytic synthesis of high-value-added chemicals. Herein, we find that the co-oxidation of polyols and NH 3 on four typical and unprotected photoanodes [i.e., BiVO 4 , α-Fe 2 O 3 , TiO 2 and WO 3 ] generates even higher photocurrent densities than those commonly used hole scavengers. Detailed research on BiVO 4 photoanodes shows that the co-oxidation process induces the in situ formation of Bi/V-rich surfaces and enables the interfacial charge transfer efficiency approaching 100%. The achieved photocurrent density of 7.3 mA cm −2 at 1.23 V RHE approaches the theoretical limit of BiVO 4 on the unprotected photoanodes, which delivers formamide production of 171.5 μmol cm −2 h −1 . By using an amplified flow photoelectrochemical cell, the photocurrent reaches 1.2A, producing formamide at the rate of 17.5 mmol h −1 and achieving the gram-scale synthesis. The co-oxidation method illustrates an efficient strategy for designing photoelectrochemical systems at ampere-level photocurrents.
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jiaqi Yang,Kexuan Gao,Yiran Chai,Nigel J.D. Graham,Li-an Hou,Yu Yang
The development of multifunctional catalytic membranes that concurrently enable rapid contaminant degradation, antifouling resistance, and long-term operational stability remains a critical challenge in advanced water treatment. Here, we describe the preparation and testing of a rationally engineered bimetallic CoCu catalyst, anchored onto graphitic carbon nitride (g-C 3 N 4 ) via a glucose-mediated cascade anchoring method (CoCu-CN), and immobilized on to an alumina ceramic membrane (CoCu-CN/M). Atomic-level characterizations revealed the coexistence of surface Co N 4 species and bulk Co Co coordination, and the electron-donating effect of Cu species stabilizes Co in an absolutely reduced state (Co 0 /Co-N 4 ). This bimetallic configuration optimized the peroxymonosulfate (PMS) adsorption configuration ( E ads = −3.05 eV) and facilitated O O oxygen bond cleavage ( I O O = 1.477 Å), thereby accelerating the generation of reactive oxygen species, including SO 4 − , O 2 − , and 1 O 2 . Consequently, the CoCu-CN system achieved complete degradation of a target pollutant carbamazepine (CBZ), with a reaction rate constant (k obs ) of 0.755 min −1 , corresponding to 158.9-fold and 3.23-fold enhancements compared to the monometallic Cu-CN and Co-CN systems, respectively. The CoCu-CN/M membrane demonstrated a high permeability (404.72 LMH/bar), sustained >98% CBZ removal over seven cycles, and exhibited strong antifouling performance. In surface water, the novel membrane maintained >95% degradation efficiency over 72 h of continuous operation, confirming its long-term stability. This study provides atomic-level insights into bimetallic catalytic activation and proposes an effective membrane-based solution for advanced water treatment.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2026
·Vol. 17
·期 1
·2333
·
IF 18.1
Xiao Tingjiao,Fang Zhen,Ran Nian,Liu Ronghui,Gao Yuxuan,Wu Jianbo,Liu Jianjun,Wang Hua,Lin Wen-Feng,Zhou Wei
Sluggish kinetics caused by 16-electron transfer hinders development of wide-temperature-range sodium-sulfur batteries. Here we report Sn-doped CoNiS multipods with an amorphous-crystalline interwoven structure. Employed as a positive electrode catalyst, the resulting sodium–sulfur battery exhibits a discharge capacity of 1320.8 mAh g −1 at 3 A g −1 after 1200 cycles at room temperature, together with stable and high-capacity electrochemical performance ranged from −20 to 50 °C. It has been evidenced that the amorphous/crystalline interfaces generated by Sn doping can adjust the microelectronic environment of Co and Ni atoms, optimize their adsorption energy toward sodium polysulfide intermediates through Co–S and Ni–S bonding, and thus decrease the energy barrier of polysulfide conversion. This interfacial regulation efficiently lowers the energy barrier of the rate-determining step and facilitates the overall reaction kinetics over a wide temperature range. This work provides an efficient amorphous/crystalline interface engineering strategy to develop high-performance catalysts.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yujie Wang,Jiaying Li,Zihan Gao,Tianbo Jia,Ning Yu,Xiang Cui,Danni Xun,Umirzakov Batokhodja,Chunyang Zhai,Shuying Gao,Hengcong Tao
The electrochemical CO 2 reduction reaction (CO 2 RR) towards CO is a promising strategy for addressing environmental carbon emission problems, but the sluggish kinetic of *COOH intermediate and the competing hydrogen evolution impede the reaction activity. Herein, a small-sized Cd Sb pyrochlore oxides (Cd 2 Sb 2 O 7 ) nanocatalyst is prepared via a competing crystalline transformation strategy, which mainly composes of linked building blocks Cd-hexahedrons ([CdO 8 ]) and Sb-octahedrons ([SbO 6 ]). Owing to the significant ionic radius disparity between Cd (0.95 Å) and Sb 5+ (0.60 Å), abundant structural oxygen vacancies and compressive lattice strain are generated in the Cd 2 Sb 2 O 7 . This unique structure induces a redistribution of surface charge between Cd and Sb and a downshift of the d-band center, which could generate positive effect for suppressing the hydrogen evolution reaction and facilitating *COOH formation. Supposition has been verified by in-situ Raman spectroscopy and serious electrochemical testing. As expected, the optimal electrocatalysts (3-SbPOs) exhibit great electrocatalytic performance for CO 2 RR to CO, achieving a high CO Faradaic efficiency (FE CO ) of ~98.0% at −1.1 V vs. RHE and maintaining stability over a 40-hour test, which are outperforming for most Cd-based electrocatalytic materials. This work provides a novel design principle for developing high-performance bimetal oxide-based electrocatalysts for CO 2 RR.
✓ 已验证
产品关联
DOI
高影响因子