JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Pengcheng Wang,Jiaxin Li,Xuanpan Xu,Zhanhong Peng,Yihui Song,Yuan Yao,Ting Zhu,Weibin Zhang,Qianjin Wang,Hong-En Wang,Chen Qing
Developing efficient electrocatalysts for the alkaline hydrogen evolution reaction (HER) remains challenging due to sluggish water dissociation and suboptimal hydrogen adsorption. Herein, we report an in-situ precursor-leaching-induced strategy for fabricating Co x Ni 1-x (OH) 2 solid solution nanorod arrays via complete Mo leaching from hydrothermally grown Co x Ni 1-x MoO 4 ·H 2 O on Ni-Co foam. This transformation preserves the one-dimensional architecture, yielding a Mo-free, binder-free electrode with exceptional HER activity, characterized by overpotentials of 38 mV and 208 mV at 10 and 50 mA cm -2 , respectively, and stability over 300 h at 100 mA cm -2 . Experimental and theoretical analyses reveal that adjacent Ni and Co sites synergistically optimize the adsorption thermodynamics of hydrogen intermediates and promote interfacial charge transfer, while Mo is fully removed as a sacrificial component that triggers the in-situ reconstruction into a Co–Ni hydroxide solid solution. This work provides a practical route to high-performance alkaline HER catalysts enabled by atomic-level Ni–Co electronic synergy.
✓ 已验证
产品关联
DOI
高影响因子
RADIATION PHYSICS AND CHEMISTRY
·
2026
·
IF 3.5
Mei Yang,Xin Chen,Xuezhu Sha,Yuhan Fan,Xizhen Zhang,Jinsu Zhang,Yongze Cao,Yichao Wang,Xiangping Li,Sai Xu,Hongquan Yu,Baojiu Chen
This work aims to explore the quantum cutting mechanisms and efficiency of Pr 3+ /Yb 3+ co-doped NaLu(WO 4 ) 2 phosphors synthesized via a high-temperature solid state reaction. To optimize Pr 3+ doping concentration, the spectral properties of Pr 3+ single-doped NaLu(WO 4 ) 2 phosphors were examined. The optimum Pr 3+ concentration was found to be 5 mol%, at which the emission intensity from the 3 P 0 level reaches a maximum. Moreover, spectroscopic and dynamic analyses further indicated that the concentration quenching of 3 P 0 and 1 G 4 levels occurs via electric dipole-dipole interaction between Pr 3+ ions. The luminescence mechanisms in NaLu(WO 4 ) 2 : 5 mol% Pr 3+ , x mol% Yb 3+ phosphors were elucidated through the dependence of the steady spectroscopic properties on the Yb 3+ concentration. It was found that the infrared emission of Yb 3+ originates via two distinct pathways: one involves two-step energy transfers from Pr 3+ in 3 P 0 and 1 G 4 to Yb 3+ , namely 3 P 0 + 2 F 7/2 → 1 G 4 + 2 F 5/2 and 1 G 4 + 2 F 7/2 → 3 H 4 + 2 F 5/2 , and the other arises from direct sensitization of Yb 3+ by Pr 3+ in 1 D 2 via one-step energy transfer 1 D 2 + 2 F 7/2 → 3 F 4 + 2 F 5/2 . In addition, the Pr 3+ itself could produce an infrared emission from 1 G 4 to 3 H 4 . Based on the confirmed luminescence mechanisms, the luminescence efficiencies of the Pr 3+ /Yb 3+ co-doped NaLu(WO 4 ) 2 phosphors were calculated by taking the corresponding energy transfer efficiencies, radiative transition efficiencies, and non-radiative transition efficiencies, and the factors influencing the total luminescence efficiency were analyzed.
✓ 已验证
产品关联
DOI
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2026
·
IF 3.6
Luyao Yang,Ning Shentu,Nanjie Liang,Yujing Wu,Toshikazu Miyoshi,Xin Zheng,Yongjin Li
The intrinsic low surface energy and weak polarity severely hinder the adhesion of polypropylene (PP) to metal substrates. Although grafting polar monomers onto the PP backbone improves interfacial adhesion, conventional reactive processing methods often suffer from low grafting efficiency, which limits adhesion performance. Herein, a bifunctionalization melt grafting strategy is proposed to simultaneously enhance grafting efficiency and interfacial adhesion by co-grafting glycidyl methacrylate (GMA) and ferulic acid (FA), a natural phenolic compound, onto the PP backbone via reactive processing. Specifically, FA dramatically increases the GMA grafting degree to 5.4% at 1.5 wt% loading, a value nearly sevenfold higher than that of the FA‑free counterpart. The FA-derived hydroxyl and carboxyl groups, together with the epoxy groups of GMA, establish strong physical and chemical interactions with aluminum (Al), as confirmed by x‑ray photoelectron spectroscopy. Consequently, the peel strength of the Al/PGF/Al laminated film reaches 2500 N/m, which is nearly 12 times higher than that of the FA‑free counterpart, with the interfacial failure shifted to a cohesive mode. This work demonstrates a sustainable and effective route to activate polyolefins for high‑performance metal adhesion through phenolic‑assisted interfacial design.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2026
·
IF 2.6
Siyu Sun,Yifan Zhang,Jun Wu,Rui Yan,Feng Zhang,Chen Wen
The selective electrocatalytic oxidation of glycerol (GOR) into high-value chemicals is crucial for sustainable biorefineries, yet achieving high selectivity, particularly for C1 products like formic acid, remains a significant challenge. Herein, we report the rational design and facile one-step hydrothermal synthesis of ZrO2@Co-MOF heterostructures, where ZrO2 nanoparticles act as core sites influencing Co-MOF growth. The optimized ZrO2@Co-MOF(0.11) catalyst exhibits unprecedented performance for GOR, achieving 98.7% selectivity and near-unity faradaic efficiency for formic acid production at industrially relevant current densities, alongside excellent long-term stability. Comprehensive electrochemical evaluations, ex situ characterization methods, and in situ/operando spectroscopic investigations reveal a pivotal innovation: the ZrO2 interface not only modulates the electronic structure of Co centers and tailors MOF morphology but, critically, directs and stabilizes the in situ electrochemical reconstruction of the Co-MOF into highly active CoOOH/Co(COO)2 species. Furthermore, theoretical calculations elucidate that this engineered interface significantly lowers the energy barrier for critical C–C bond cleavage (ΔG = 0.03 eV), thereby suppressing C3 intermediates and driving the reaction pathway selectively toward formic acid. This work unveils a powerful strategy in hetero-interfacial engineering of MOF-derived materials for precise and efficient biomass valorization.
✓ 已验证
产品关联
DOI
高影响因子
Acta Biomaterialia
·
2026
·
IF 10.4
Jiakun Guo,Jintao Huang,Yan Wang,Juan Sun,Shang Liu,Chao Deng,Jian Lu,Zhiyuan Zhong
Transarterial chemoembolization (TACE) is a primary treatment option for unresectable hepatocellular carcinoma (HCC). Its clinical efficacy is, however, challenged by hypoxic and immunosuppressive tumor microenvironment. Herein, we report that absorbable microspheres (Asphere) with sustained co-delivery of hypoxia-inducible factor 1 (HIF-1) inhibitor, acriflavine (ACF), effectively reverse tumor hypoxia and boost TACE therapy of advanced HCC. Interestingly, Asphere demonstrates nearly quantitative loading of both epirubicin (EPI) and ACF within 1 min, while achieving sustained release of the dual drugs over 8 weeks. EPI/ACF-loaded Aspheres (EA@Asphere) greatly inhibit hypoxia-associated proteins and augment immunogenic cell death in HCC cells under hypoxic conditions, which in turn triggers maturation of dendritic cells (DCs) and secretion of pro-inflammatory cytokines. In H22 murine hepatoma model, EA@Asphere markedly boosts DC maturation, CD8 + T cell infiltration, and macrophage polarization from M2 to M1, achieving complete tumor regression in 2 out of 7 mice. EA@Asphere further blocks tumor vasculature in orthotopic VX2 liver tumor in rabbits, alleviates hypoxia, and suppresses tumor progression and metastasis. Thus, Asphere co-delivering HIF-1 inhibitors holds significant translational potential to boost TACE therapy in advanced HCC. Statement of significance This work introduces an approach to enhance transarterial chemoembolization (TACE) for advanced hepatocellular carcinoma (HCC) by co-delivering HIF-1 inhibitor acriflavine (ACF) and epirubicin (EPI) via absorbable microspheres (Asphere). Asphere demonstrates swift dual drug loading, sustained 8-week release, and simultaneous reversal of hypoxia and immunosuppression, addressing critical challenges of current TACE therapy. In preclinical studies, EA@Asphere significantly suppresses hypoxia-associated protein expression, enhances immunogenic cell death, promotes dendritic cell maturation, and reprograms tumor microenvironment, achieving significant inhibition of the tumor progression and metastasis. These findings offer transformative potential to improve clinical outcomes in advanced HCC, holding broad interest for researchers and clinicians in oncology and drug delivery.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
BIOMATERIALS
·
2026
·
IF 13.6
Jiaqi Wang,Jingze Liu,Yuan Wei,Tong Wang,Yage Hu,Yao Xiong,Rifang Luo,Fanjun Zhang,Yunbing Wang
Implantable medical device-associated infections can significantly increase the mortality rate and medical costs of patients. The construction of coatings with antibacterial and antifouling functions is an effective way to prevent bacterial infections. In this study, we construct an antimicrobial coating by means of layer-by-layer self-assembly using the zwitterionic polymer PA (poly(2-(methacryloyloxy) ethyl) dimethyl-(3-sulfopropyl) ammonium hydroxide and the cationic polymer PQ (polyquaternium). Unlike conventional strong electrostatic system of anion-cationic polymers, zwitterionic polymers can engage in weaker electrostatic interactions with cationic polymers. This “weak electrostatic interaction” provides cationic groups with more “freedom”, thereby preserving their capacity to disrupt bacterial membranes. The resulting coating exhibits exceptional antibacterial performance, achieving a bactericidal efficiency exceeding 97.6% against S. aureus . Furthermore, such weak electrostatic interaction can also help retain the combination of charged groups and water molecules, facilitating the formation of a dense “hydrated protective layer” that endows the coating with outstanding antifouling performance and significantly reduces the formation of blood clots. In absorbable suture and intravascular catheter models, the coating demonstrates excellent bactericidal and antithrombotic properties. These findings not only offer a versatile surface modification strategy for implantable medical devices but also enhances the understanding of the interaction between zwitterionic polymers and cationic polymers.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Science
·
2026
·
IF 14.1
Jiaying Zhang,Junjie Huang,Siying Zhang,Yanjia Cui,Chao Kong,Zijian Peng,Huihui Jiang,Sirui Deng,Zhuoyao Chen,Caili Yang,Ketong He,Zhen Li,Yibing Song,Gongwei Wang,Lin Zhuang
Tandem catalysts represent a promising paradigm for synergistic electrochemical CO 2 reduction (CO 2 RR) to high-value multi-carbon (C 2 ) products, yet coordinate regulation of key intermediates to boost C 2 selectivity remains unclear. Herein, a dual-phase templating coupled with gas-phase reduction strategy is exploited to fabricate a series of CuAg@MSN tandem catalysts with tunable Cu/Ag mass ratios. A volcano-type relationship between catalyst composition and C 2 product selectivity is observed, with CuAg@MSN-3 (15 wt.% Ag, 40 wt.% Cu) delivering the maximum C 2 Faradaic efficiency (FE) of 75.4% at −1.4 V vs RHE. And a high FE of 63.5% and a large partial current density of 330 mA/cm −2 toward C 2 products on CuAg@MSN-3 at a cell voltage of 4.5 V in a membrane-electrode assembly (MEA). In situ infrared spectroscopy and density functional theory (DFT) calculations jointly corroborate that CO generated on Ag sites spontaneously spills over and becomes confined within the mesopores of the MSN framework, markedly promoting CO re-adsorption on adjacent Cu sites and elevating the * CO surface coverage. This intermediate regulation effectively enhances the reaction rate of C─C coupling and consequently boosts C 2 product selectivity. The present work exemplifies a rational, confinement-guided design of tandem catalysts for steering reaction intermediates toward desired multicarbon products.
✓ 已验证
DOI
PubMed
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.4
Fuquan Xiong,Jiamei Yang,Mingen He,Hang Wang,Fuxiang Chu
NPCS were prepared via solvent exchange, hydrothermal treatment and carbonization treatment. • The N and P contents in the NPCS were controlled by the doping amount and carbonization temperature. • The NPCS maintained perfect spherical morphology and good dispersion. • The NPCS-based electrode exhibited excellent electrochemical performance. Lignin-based carbon nanospheres have been considered as ideal electrode materials for supercapacitors because of regular morphology and high specific surface area. Heteroatom-induced defects on the carbon chain can resolve the poor hydrophilicity and surface functional group deficiency of pure carbon nanospheres, improving electrochemical performance. Herein, nitrogen and phosphorus co-doped lignin-based carbon nanospheres (NPCS) with different doping content were constructed by solvent exchange, hydrothermal treatment and carbonization treatment. The results showed that the NPCS could maintained perfect spherical morphology and good dispersion. When the ratio of covalent-bond stabilized lignin nanospheres to ammonium dihydrogen phosphate was 1:1 and the carbonization temperature was 700 ℃, the optimal specific surface area (89.8 m 2 g −1 ) and doping ratio of nitrogen and phosphorus (14 at%) were demonstrated in the NPCS. The obtained NPCS showed excellent capacitance storage capacity (312 F/g at 0.2 A/g) and significant cycle stability (93.7% capacitance retention after 10,000 cycles). The symmetric capacitor assembled based on NPCS had an energy density of 4.9 Wh /kg at the power density of 129.8 W/kg. This is mainly attributed to the fact that the NPCS has a high specific surface area and an enhanced affinity toward K ions. The study presents a novel approach to heteroatom co-doping in lignin-based carbon nanospheres, highlighting their potential for use in electrode materials. Download: Download high-res image (227KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2026
·
IF 2.6
Liezhi Cao,Qiang Gao,Xiaoming Zuo,Yong Kong,Haiying Chen
Iron-based metal organic framework (Fe-MOF) is first synthesized by using tetra(4-carboxyphenyl)-porphyrin (TCPP) as the organic building blocks, which is then co-encapsulated with doxorubicin (DOX) in the oxidized sodium alginate (OSA)/carboxymethyl chitosan (CMCS) hydrogels cross-linked through the Schiff base reaction. The imine bonds (–HC=N–) between OSA and CMCS can be hydrolyzed in the acidic tumor microenvironment (TME), resulting in the release of DOX and Fe-MOF. The Fe-MOF can be further decomposed by the acidic TME to release TCPP and Fe3+. Oxygen molecules are catalyzed to singlet oxygen (1O2) by the photosensitizer TCPP upon exposure to near infrared (NIR) light, and the generated 1O2 can bring about photodynamic therapy (PDT). Additionally, the released Fe3+ can be reduced to Fe2+ by glutathione (GSH), which can react with H2O2 in the TME through the Fenton reaction to generate hydroxyl radicals (·OH) for chemodynamic therapy (CDT). Due to the synergistic therapy of PDT, CDT and chemotherapy, the Fe-MOF/DOX/OSA/CMCS hydrogels exhibit significant cytotoxicity against murine breast cancer cell line 4T1.
✓ 已验证
DOI
高影响因子
Analytical Methods
·
2026
·
IF 3
Ma Juanjuan,Zhaozhou li,Huawei Niu,Wenfen Zhang
The development of sensitive, accurate methods for detecting amphetamine-type stimulants (ATS) has become increasingly urgent, driven by the pressing need to protect human health and environmental safety. However, achieving efficient, selective detection in complex sample matrices remains a major analytical challenge. Magnetic solid-phase extraction (MSPE) offers notable advantages over conventional methods (e.g., LLE, SPE, and DLLME), including shorter extraction times, simpler procedures, and more rapid separation. In this study, a double-shell Fe3O4@SiO2@5F composite was developed via the deposition of a fluorine- and nitrogen-doped polymer onto Fe3O4@SiO2. The characterization confirmed the successful preparation of the coating and showed that the composite material has an adsorption capacity superior to that of traditional materials. An MRM-based GC-MS/MS method was established, for the enrichment and quantification of six ATS, including AMP, MATM, PEA, MDA, MDMA and MDEA. This method exhibits good recoveries, with linear correlation coefficients (R2) ranging from 0.9974 to 0.9999.. The limits of detection (LODs) and quantification (LOQs) were 0.66-1.11 ng mL-1 and 1.98-3.30 ng mL-1, respectively. The adsorption mechanism, explored through theoretical calculations, was consistent with experimental data: kinetics followed the pseudo-second-order (PSO) model, while isotherms followed the Langmuir model. Furthermore, density functional theory (DFT) calculations demonstrated that the adsorption process was synergistically driven by π-π, C-H-π, and hydrogen-bonding interactions. The composite demonstrated excellent stability across ten consecutive extraction-desorption cycles. Moreover, its successful use in real environmental water and biological samples confirmed its practical value. This study underscores the significant potential of the developed composite for the reliable monitoring and screening of trace drugs.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2026
·
IF 5.5
Zhicheng Wang,Fengrui Zhang,Ming Huang,Zhifeng Qin,Xinghui Wang,Jingjing Xu,Ke Wang,Byoungwoo Kang,Xiaodong Wu
Propylene carbonate (PC) is a promising electrolyte solvent with a wide liquid-phase temperature range, which can improve the wide-temperature performance of lithium-ion batteries (LIBs). Unfortunately, PC easily co-intercalates into graphite (Gr) interlayers with Li+ and leads to the exfoliation of the Gr structure. Herein, we demonstrate that an anion-rich artificial solid electrolyte interphase (SEI) on the surface of Gr, constructed by the polymeric ionic liquid (PIL) solid polymer electrolyte (SPE), can significantly suppress co-intercalation of the PC solvent, so that the Gr electrode can adequately work in PC-based electrolytes. This is mainly owing to the PIL SPE layer, which provides a high local concentration of TFSI− anions and selectively excludes the solvent-separated ion pair (SSIP) configuration of Li+-PC from entering the graphite interface. Meanwhile, a robust anion-derived inner SEI layer can be formed on the Gr surface through the preferential decomposition of anions. Therefore, the PIL SPE layer can effectively achieve highly reversible lithiation/delithiation of the Gr electrode in a a PC-based electrolyte. Consequently, the Gr||LiNi0.5Co0.2Mn0.3O2 (NCM523) pouch cell with a a PC-based electrolyte exhibits a high capacity of 3060 mAh, an extremely high CE of ≈100%, and good cycling stability with 97.1% capacity retention after 200 cycles. Acceptable rate capability and good low-temperature performance at –20 °C are also achieved in this pouch cell.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 15
·1203
·
IF 3.2
Zhang Xiaoru,Luo Laima,Song Jing,Han Mingming,Sun Hongqian,Cao Lei,Wu Yucheng
A solvent-free strategy combining dry ball milling and calcination is developed to fabricate an Al-Y co-doped ZrO 2 (Al-YSZ) coating on LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes. Structural characterizations confirm Al-YSZ induces NCM811 lattice expansion (unit cell volume + 0.00026 nm 3 ) and reduces cation mixing ( I (003) / I (104) = 1.621). TEM shows a ~ 50 nm coating with intimate matrix contact. Electrochemically, it delivers 218.9 mAh/g at 0.1 C (21.7% higher than pristine), retains 161.5 mAh/g after 200 cycles at 1 C, and exhibits superior stability under 4.5 V (137.3 mAh/g after 200 cycles), 45 ℃ (64.5% retention), and 5 C (86.0% retention). Mechanisms involve enhanced interfacial stability, optimized Li + kinetics (diffusion coefficient 2.21 × 10 −12 cm 2 /s after cycling), and mitigated structural degradation. This scalable green strategy advances high-nickel cathode optimization.
✓ 已验证
DOI
高影响因子