JOURNAL OF LIGHTWAVE TECHNOLOGY
·
2026
·
IF 5.2
Zhiyong Yin
The simultaneous and specific detection of multiple heavy metal ions in complex environments remains a significant challenge for optical fiber sensors, primarily due to spectral crosstalk and temperature interference. To address this, we present a monolithically-integrated, dual-channel surface plasmon resonance (SPR) fiber sensor capable of crosstalk-compensated and temperature-compensated detection of Cu²⁺ and Ni²⁺. The sensor is fabricated by cascading two sensing regions on a single microstructured optical fiber (MOF), where a strategic combination of heterogeneous metallic films—a silver film for the Cu²⁺ channel and a gold film for the Ni²⁺ channel—creates two spectrally distinct resonance dips in the visible range. To overcome the limitation of specificity, ion-imprinted polymers (polyacrylic acid and chitosan) are functionalized onto the respective channels, creating highly selective recognition sites. Furthermore, an independent temperature-sensing probe, with its resonance strategically located in the near-infrared region, is incorporated into the optical path for real-time temperature monitoring, effectively eliminating thermal cross-sensitivity. Experimental results demonstrate that the sensor exhibits high sensitivity (up to 0.41 nm/μM for Cu²⁺ and 0.34 nm/μM for Ni²⁺ in the low concentration regime), a fast response time (20-30 s), and low detection limits. This work provides a compact and robust all-in-one sensing solution that paves the way for practical, multi-analyte environmental monitoring.
✓ 已验证
产品关联
DOI
高影响因子
LANGMUIR
·
2026
·
IF 4.4
Cong Xiang,Fan Xue,Shunzong Wu,Juan Wang,Chenyu Yang,Yike Huang,Xiangzi Li,Meifang Wang,Xiaomei Cheng
Histidine-rich proteins (His-proteins) are vital biomolecules with diverse physiological roles. However, their purification from complex biological samples remains challenging. Here, we successfully prepared Ni/NixPy composite nanospheres with different phosphating degrees, featuring surface-exposing Ni2+ properties for efficient separation and purification of His-proteins. The phosphated products exhibited a spherical morphology, reduced cytotoxicity, and good biocompatibility. The optimal Ni/NixPy demonstrated excellent adsorption and separation capacity for His-tagged bovine hemoglobin (BHb), which is attributed to their Ni2+ surface-exposing capability and magnetic properties, achieving a adsorption capacity of 2130.4 mg/g under the tested conditions. While the adsorption sites for His-proteins are enhanced, the separation process is simplified. SDS-PAGE analysis confirmed the selective adsorption of Ni/NixPy for His-proteins in a BSA/BHb mixed solution. The Ni/NixPy spheres demonstrated good stability and recyclability, maintaining an 85% adsorption efficiency after five cycles. In addition, His-proteins can be efficiently separated and purified from complex fetal bovine serum. Therefore, this work reports an effective surface-exposing Ni2+ approach to enhance the efficiency of protein separation and purification with the potential to expand applications in diagnostics and therapeutics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2026
·
IF 5.1
Ruohan Xu,Ming Liu,Tallat Munir,Shiyang Bai,Jihong Sun,Haoqian Guo,Zhongchao Sun,Xiaoyan Bai
This study explores the preparation of the Ni-based catalysts supported on clinoptilolite (CP) for dry reforming of methane (DRM) using three methods: impregnation, complex route, and one-pot synthesis. The impact of these strategies on Ni dispersion and catalytic performance was investigated. Triethylamine was utilized as a complexing agent to improve Ni dispersion, prevent catalyst sintering, and reduce carbon deposition. The physicochemical properties were characterized using X-ray diffraction patterns, Fourier transform infrared spectroscopy, Raman spectra, and X-ray photoelectron spectroscopy spectra, N 2 adsorption–desorption isotherms, scanning electron microscopy and transmission electron microscopy images, hydrogen temperature-programmed reduction and thermogravimetric analysis. The results indicate that the CP-TEA/4Ni catalyst prepared via the complex route exhibited a higher Ni content (2.84 wt%) and demonstrated the highest initial activity at 600 °C (44.5% CH 4 conversion, 43.4% CO 2 conversion). Conversely, the (3NiTEA)CP catalyst synthesized via the one-pot method confined Ni particles within the microporous structures of CP, significantly suppressing carbon deposition and Ni particle growth, and thereby ensuring exceptional stability (105 h at 600 °C). The amorphous and graphitic carbon deposition coexisted in the deactivated catalysts, whereas the I D /I G value of the deactivated CP/TEA-3Ni was higher. Furthermore, Grand Canonical Monte Carlo-Molecular Dynamics coupled simulations revealed that surface Ni clusters were conducive to enhancing CH 4 adsorption heat and facilitating CO 2 diffusion, which effectively inhibited carbon deposition. These findings underscore the role of synthetic strategies in designing high-performance Ni-based catalysts for DRM reaction, offering pathways to more cost-effective, stable, and efficient catalysts for industrial methane reforming and carbon emission reduction.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2026
·
IF 2.6
Xingbo Qi,Lei Ni,Ziyan He,Xu Sun,Hejie Lu,Haiqiang Li,Ruixi Meng,Maosen Fu,Xiao Ma
Cobalt-free, nickel-rich layered oxide cathode material LiNixMn1-xO2 (NM) has attracted much attention due to its high specific capacity and low cost. However, cobalt-free cathode materials have more serious problems such as Li/Ni disorder and structural degradation compared to ternary LiNixCOyMn1-x-yO2 (x ≥0.5, NCM) cathodes. To address these challenges, LiNi0.6Mn0.4O2 (NM64) and a series of Mo-doped Li(Ni0.6Mn0.4)(1-x)MoxO2 (x = 0, 0.01, 0.02, 0.03, 0.04, 0.05) cathode materials were designed and prepared by high-temperature solid-phase method, and the effect of Mo doping on the structure and electrochemical performance of NM64 cathodes was systematically investigated. Mo doping not only suppresses Li/Ni mixing and enlarges interlayer spacing but also effectively inhibits primary particle overgrowth, resulting in refined particle morphology that enhances structural stability and Li+ transport kinetics. Consequently, the Mo-doped NMM cathodes exhibit more stable interface with significantly suppressed side reactions. Li(Ni0.6Mn0.4)0.98Mo0.02O2 cathode exhibited superior capacity retention of 86.83% after 100 cycles at 1.0 C (at 25℃ and 2.8-4.3 V), surpassing the NM matrix by 8.98% and demonstrating the remarkable cycling stability improvement. This work elucidates the structural and interfacial stabilization mechanisms induced by high-valent Mo doping, providing an effective approach to developing high-performance Co-free layered oxide cathodes.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2026
·
IF 9.2
Hamza M. Haruna,Yanxiang He,Zhixiao Zhu,Hao Yang,Selvam Mathi,Guanhua Zhang,Zhongmin Wang,M. Sadeeq Balogun
Controlling phase evolution during nitridation is essential for creating active interfaces in multi-metal electrocatalysts. However, the nitridation pathways in complex systems such as Mo-Fe-Ni molybdates remain poorly defined. Herein, tuning the Fe contents in the Fe-Mo precursor directly governs ammonia activation and drives nitridation-induced reconstruction. Increasing Fe concentration promotes NH3 decomposition, shifting the product from an oxide-rich phase (N-doped MoO2-FeMoO4-NiMoO4-NiO, denoted N/MoO2-MoFeNi-O) to a nitride-dominated heterostructure comprising MoO2, Mo2N, FeN and Ni4N (N/MoO2-MoFeNi-N). The optmized N/MoO2-MoFeNi-N nitride-oxide interfaces enhance electrical conductivity, optimize oxygen-intermediate adsorption, and improve corrosion resistance. As a result, N/MoO2-MoFeNi-N exhibits superior oxygen evolution performance in both alkaline freshwater and seawater, requiring overpotentials of only 309/392 and 334/499 mV to reach 500 and 1000 mA cm-2, respectively. DFT calculations identify the MoO2@FeN interface is the most active site with the lowest energetic barrier for the potential-limiting step. The catalyst also demonstrates efficient oxygen reduction activity, enabling high-performance zinc-air batteries with open-circuit voltage of 1.33 V, peak power density of 84.2 mW cm-2, and stable cycling over 140 h. This work clarifies the role of Fe in directing nitridation pathways, providing a rational route to construct durable, interface-rich nitride-oxide architectures for advanced oxygen atalysis.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Fengli Wang,Zechu Deng,Lishuang Wei,Ning Liu,Chengna Dai,Biaohua Chen
One-step hydrothermal synthesis of cost-effective Ni/MoO 2 catalyst. • Kinetic model enables reliable reaction dynamics quantification. • Ni/MoO 2 shows exceptional HER activity with η 10 of 104 mV. • MoO 2 lowers H 2 O dissociation barrier, Ni promotes OH desorption. Facing the energy crisis and carbon neutrality demands, electrolytic green hydrogen is a key energy transition focus. This work developed a non-noble Ni/MoO 2 catalyst for alkaline hydrogen evolution reaction (HER), delivering 104 mV overpotential (10 mA cm −2 ) and 115.1 mV dec −1 Tafel slope. This is closely related to the Ni/MoO 2 heterostructure. MoO 2 acts as an efficient H 2 O dissociation active site (Δ G = 0.16 eV), while Ni nanoclusters facilitate OH* desorption, reducing Δ G OH* from 0.21 eV (sole MoO 2 site) to 0.13 eV (synergized by Ni nanocluster). Regarding the H* intermediate, it exhibits comparable Δ G H* values (0.34 eV on MoO 2 and 0.36 eV on Ni/MoO 2 ), indicating H* directly evolves into H 2 over MoO 2 . Furthermore, intrinsic reaction kinetics were systematically studied at 20–40 °C, and an intrinsic kinetic model was established. This model can effectively predict elementary reaction rates and provides key kinetic data for future anion exchange membrane water electrolyzers (AEMWEs) design. Download: Download high-res image (275KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2026
·
IF 8.3
Yujuan Chen,Yuhua Mo,Mengjiao Zhu,Yunzhi Han,Tao Liu,Wei Zhang,Zhenyu Chu,Xiaoming Ren,Wanqin Jin
MicroRNA-135a (miRNA-135a) is a crucial biomarker for the early diagnosis of breast cancer (BC), the leading malignancy among women. However, its sensitive and efficient detection remains challenging due to the time-consuming nature of conventional techniques and the extremely low abundance of miRNA-135a in biological samples. In this work, we developed an ultrasensitive electrochemical aptasensor based on nickel‑embedded nitrogen‑doped carbon nanotubes (Ni‑NCNTs) wrapped carbon fiber (CF) for the rapid detection of miRNA‑135a within only 15 min. The tendril‑like Ni‑NCNTs were grown in situ and uniformly around the CF surface via a Ni 2 + ‑induced controlled chemical vapor deposition process, serving as an effective nanoscale signal amplifier. This unique hierarchical architecture exhibits excellent electrocatalytic activity, rapid electron‑transfer capability, and abundant active sites for immobilizing capture DNA (cDNA), thereby enhancing the recognition and signal response to reverse‑transcribed DNA (rtDNA) corresponding to miRNA‑135a. Under optimized conditions, the aptasensor achieved an ultralow detection limit of 3.24 aM (3.24 ×10 −9 nM) with high reliability, excellent selectivity, and efficient performance in real‑sample analysis. The CF@Ni‑NCNTs based aptasensor demonstrates considerable potential to facilitate rapid, ultrasensitive early detection screening and warning of various cancers, offering a powerful analytical platform to support clinical diagnostics in diverse scenarios.
✓ 已验证
产品关联
DOI
高影响因子
Journal of CO2 Utilization
·
2026
·
IF 8.6
Shuai Hu,Xiaoxuan Zhu,Yan Li,Yu Zhang,Bin Du,Jianjun Su,Yan Zhu,Zhenfeng Wang,Yanming Wang,Gewen Yu,Jian Ding,Yuqing Wang,Xiaohui Guo
Take into consideration the backdrop of global energy crisis and rising carbon dioxide concentration in the atmosphere, to research and develop efficient catalysts for converting CO 2 into sustainable energy is crucial. Based on this background, this study employed the complexation combustion method to prepare CuNi nanoclusters (NCs) with varying atomic ratios and applied in catalytic hydrogenation of CO 2 to CO or methanol. Through systematic characterization techniques such as XRD, SEM, BET, in-situ XPS, EPR, and chemisorption, the crystal phase structure, morphological features, physico-chemical properties, and catalytic performance of the as-obtained catalysts were thoroughly analyzed. The results of activity measurements demonstrate that the electronic synergy between CuNi bimetals exerts a positive catalytic effect on CO 2 hydrogenation to methanol. Notably, the Cu 1 Ni 1 catalyst achieved the striking methanol selectivity (98.5%) while maintaining a higher conversion of CO 2 (11.4%). Specifically, thanks to the employment of acetic acid complexation together with the isolation and stabilization effects of Ni species, a considerable amount of metastable Cu + is detected in the obtained catalyst as evidenced by XRD and in-situ XPS, which synergistically interacts with Cu 0 and facilitates the redox cycling of Cu active sites for CO 2 hydrogenation. Besides, the CO 2 -TPD and EPR show that a higher concentration of oxygen defects and the resulting large number of basic sites with moderate strength greatly facilitate the adsorption of CO 2 and hydrogenation to methanol; however, the excessively sites with strong basicity which present on the surface of Cu 0 Ni 1 generate the strong adsorption of CO 2 molecules, making the reaction route turned to the reverse water gas shift which is conducive to the hydrogenation of CO 2 to CO. Thus, the bond strength between CO 2 and basic site could alternate the mechanism of catalytic reaction on supported copper based catalysts.
✓ 已验证
产品关联
DOI
高影响因子
Joule
·
2026
·
IF 37.1
Bosheng Zhao,Dongsheng Ren,Deqing Li,Hongkun Pan,Yi Guo,Qianfan Pei,Xinyu Rui,Dechang Wang,Jinli Liu,Feixiong He,Peng Huang,Tiening Tan,Gaolong Zhu,Jianfeng Hua,Xiang Liu,Languang Lu,Minggao Ouyang
All-solid-state batteries (ASSBs) incorporating Ni-rich cathodes and sulfide solid electrolytes are promising for next-generation energy storage. However, their performance is constrained by the inherent electrochemo-mechanical instability and sluggish Li + diffusion kinetics in the randomly oriented Ni-rich cathodes. Herein, we present a microstructure-tailored Ni-rich cathode with fast Li + diffusion layer through regulation of primary particle size and distribution. Comprehensive investigations demonstrate that this optimized Ni-rich cathode enables rapid Li + transport kinetics and effectively accommodates strain accumulation during cycling. Furthermore, an in situ -formed Li 2 CO 3 coating on the cathode surface provides robust passivation against sulfide electrolyte decomposition at the interface. Consequently, sulfide-based ASSBs employing this Ni-rich cathode exhibit a high reversible capacity of 233.8 mAh g −1 and remarkable capacity retention of 79% after 1,000 cycles at 1 C and 71% after 10,000 cycles at 5 C. This work provides an effective and scalable strategy for designing high-performance Ni-rich cathodes, paving the way for high-energy-density and long-lifespan ASSBs.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 2
·122011
·
IF 7.5
Di Jin,Yunpeng Zou,Yang Zhao,Shuai Chen,Shiwei Luo,Taotao Chen,Jinchuan Zhang,Jialin Chen,Jijie Li,Yuewen Mu,Wen-Yan Zan,Fengwei Zhang
Transition metal-nitrogen-carbon (M-N-C) catalysts show great promise for converting CO₂ into valuable fuels and chemicals via electroreduction (CO₂RR). Nonetheless, controversy remains regarding which specific MNₓ coordination structure in M-N-C catalysts governs CO₂RR performance. We synthesized a series of Ni-NOMC catalysts with high specific surface area and varying NiN₃-Pyr site loadings using SBA-15 as a template, employing a small molecule condensation and pyrolysis strategy. Aberration-corrected scanning transmission electron microscopy (AC-STEM) and X-ray absorption spectroscopy (XAS) confirmed the presence of atomically dispersed Ni sites coordinated by pyrrolic nitrogen (NiN₃-Pyr). The Ni-NOMC-3 catalyst, with a higher NiN 3 -Pyr loading, achieved a remarkable CO Faraday efficiency (FE CO ) of 99.6% at −0.57 V vs. the reversible hydrogen electrode (RHE), while maintaining FE CO > 99% across a broad potential window (−0.17 to −0.97 V vs. RHE). Moreover, the ordered mesoporous structure of this catalyst enhances mass transport properties and optimizes active site accessibility, enabling a high CO partial current density of 157 mA·cm⁻² in a flow cell system. Theoretical simulations further reveal that the NiN₃-Pyr coordination structure exhibits superior catalytic performance for CO₂RR-to-CO compared to other possible NiN x configurations.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Wei Deng,Mingxiu Jiang,Lingxin Meng,Jiawei Feng,Jiashuo Zhang
Polymer dielectrics play an indispensable role in electrostatic energy storage due to their merits of high voltage resistance, lightweight, excellent flexibility, and easy processability. However, the deterioration in dielectric reliability and energy loss at high temperatures limit their versatility for broader applications. Herein, Ni@Al2O3 NFs are fabricated by encapsulating different content of nickel (Ni) nanoparticles into alumina nanofibers (Al2O3 NFs) via the electrospinning technique and employed to simultaneously improve the dielectric constant and breakdown strength of poly(ether imide) (PEI). This is realized by the coupling action of the increased interfacial polarization, Coulomb blockade effect of Ni nanoparticles, and wide bandgap of Al2O3 NFs. Notably, the PEI nanocomposite films containing 0.50 vol % Ni@Al2O3 NFs exhibit an excellent discharge energy density (Ud) of 5.8 J/cm3 at 150 °C, 262% higher than that of pristine PEI (Ud = 1.6 J/cm3), accompanied by a high efficiency of 81.3%. This work provides a promising strategy to improve the high-temperature energy storage performance of polymer-based dielectrics by exerting the synergistic effect of fillers at ultralow content.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF CATALYSIS
·
2026
·
IF 6
Ning Zhu,Haiyun Huang,Jia Liu,Wenjie Zhang,Xinghua Zhang,Longlong Ma,Lungang Chen
The production of sustainable aviation fuels (SAF) via hydrodeoxygenation (HDO) of biomass-derived aldol-condensation intermediates has attracted extensive attention. In this work, a composite Nb 2 O 5 -γ-Al 2 O 3 supported Ni catalyst was designed to modify Ni reducibility and catalyst acidity for efficient HDO. We found that the formation of Nb-O-Al interfacial bonds effectively suppressed the generation of Ni-O-Al, significantly weakening the strong metal-support interaction (SMSI) inherent to γ-Al 2 O 3 and greatly enhancing the reducibility of Ni. As a result, the Ni 0 fraction increased from 27.01% on Ni/γ-Al 2 O 3 to 47.09% on 15Ni/N2A1. Meanwhile, the strong Lewis acidity associated with Nb 5+ provided crucial sites for C-O bond cleavage, while the intrinsic acidity and mesoporous structure of γ-Al 2 O 3 were preserved and further optimized within the composite support. TEM and CO-pulse measurements confirmed improved metal dispersion and reduced Ni particle size, collectively strengthening both hydrogenation and deoxygenation functions. The composite 15Ni/N2A1 catalyst achieved a high alkane yield of 79.6 wt% with initial reaction rate of 35.90 mmol·L −1 ·h −1 , in the HDO of the furfural-cyclopentanone aldol-condensation product, together with excellent substrate adaptability and cycling stability. Overall, the composite Nb 2 O 5 -γ-Al 2 O 3 enables synergistic regulation of Ni reducibility, medium and strong acidity, providing an effective design strategy for high-performance non-noble metal catalysts in SAF production by HDO.
✓ 已验证
DOI
高影响因子