CARBOHYDRATE POLYMERS
·
2019
·
IF 6.044
Xiao Chen,Jian Cui,Xuran Xu,Bianjing Sun,Lei Zhang,Wei Dong,Chuntao Chen,Dongping Sun
In recent decades, increased industrial activities have led to the release of various pollutants, such as toxic heavy metals, inorganic anions, and organics. It is imperative but challenging to develop an eco-friendly treatment technology with easy operation, low cost, and high efficiency. Here, we describe a design of magnetic purifier, which has biomass-based structure by blending attapulgite/chitosan (ATP/CS) composite with bacterial cellulose nanofibrils (BCNs). Compared to similar materials reported previously, our product exhibited efficient adsorption capacities towards various metal ions including Pb 2+ , Cu 2+ , and Cr 6+ , and anionic organic dyes including Congo red. The adsorption process could be well fitted by Langmuir isotherm and pseudo-second order equation. Additionally, the adsorption capacity only decreased less than 8% after five adsorption-desorption cycles. We expect our design will inspire more efforts to build a multifunctional water purifier with simple operation, and hopefully effectively remove pollutants from wastewater in future practical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2019
·
IF 6.044
Li Hao,Guanquan Lin,Jiajia Lian,Long Chen,Hongjun Zhou,Huayao Chen,Hua Xu,Xinhua Zhou
In order to further enhance hydrophilicity of zein and achieve nano-scale pesticide system, phosphorylated zein (P-Zein) was incorporated with graft copolymer CMC-g-PDMDAAC by electrostatic interaction , in which carboxymethyl cellulose (CMC) and diallyldimethylammonium chloride (DMDAAC) as monomers. P-Zein/CMC-g-PDMDAAC was applied to encapsulate model pesticide avermectin (AVM) via electrostatic interaction to achieve AVM@P-Zein/CMC-g-PDMDAAC nano-pesticides. The stability, drug loading, anti-ultraviolet, adhesion, sustained-release and toxicity of nano-pesticides presented considerable behavior confirmed via various characteristics. The results indicated that AVM@P-Zein/CMC-g-PDMDAAC had an average particle size of 360 nm, and possessed favorable dispersion performance and excellent anti-ultraviolet property compared to P-Zein. And comparatively, encapsulation efficiency increased up to 82.11%. In addition, adhesion performance of AVM@P-Zein/CMC-g-PDMDAAC on foliage also improved by about 20% compared to P-Zein. Also, AVM@P-Zein/CMC-g-PDMDAAC can intelligently control pesticide release by adjusting monomer ratio and pH values. More importantly, such nano-pesticide system presented no significant difference on toxicity in comparison with bare AVM .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Polymers
·
2019
·Vol. 11
·期 12
·1986
·
IF 3.164
Shaoxiang Lee,Yunna Lei,Dong Wang,Chunxu Li,Jiaji Cheng,Jiaping Wang,Wenqiao Meng,Meng Liu
ZIF-8 nanoparticle-doped polyvinyl alcohol (PVA)-S-MC films were prepared via casting method. The effect of different concentrations of ZIF-8 on the physical properties and structural characterization of the films were investigated. The results indicated that ZIF-8 could increase the water resistance and mechanical property of the membrane. Through FTIR, scanning electron microscope (SEM), atomic force microscope (AFM), and TGA analysis, it was found that ZIF-8 changed the phenomenon of macromolecule agglomeration and improved the thermal stability of the membrane. The breathable behavior of the film was also studied through oxygen permeability and water vapor permeability analysis. The result illustrated that the breathability of the film improved significantly by adding ZIF-8. The maximum reached when the weight ratio of ZIF-8 was 0.01 wt %. The property expands the application of PVA/starch blend film in the postharvest technology of fruits and vegetables.Keywords:PVA/starch;composite membrane;metal-organic frameworks
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2019
·
IF 6.044
Yongjian Xu,Yun Shi,Feng Lei,Lei Dai
Cellulose-based materials are widely used in the biomedical field. However, the lack of antibacterial activities of cellulose fibers inevitably causes bacterial infection damages. In this study, Schiff base was first introduced to endow the cellulose fibers good antibacterial property and copper ions were complexed with Schiff base to form a complex. The prepared complex greatly enhanced the antibacterial properties of the cellulose fibers. FT-IR, XRD, UV–vis and SEM-EDS results proved the successful synthesis of Schiff base and its copper (II) complex. The antibacterial tests indicated that the width of the inhibition zone of the as-prepared cellulose-based Schiff base-Cu (II) complex against E. coli and S. aureus increased by 472 % and 823 %, respectively, in comparison to the Schiff base ligand. This significant increase could be attributed to the incorporation of the copper ions (II). This Schiff base-Cu (II) complex containing cellulose-based antibacterial materials are expected to be widely used for biomedical application.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2019
·Vol. 55
·期 5
·2176-2185
·
IF 3.442
Ghorbani Marjan,Nezhad-Mokhtari Parinaz,Sohrabi Hessamaddin,Roshangar Leila
In the last years, chitosan (CS) nanofibers as one of the biodegradable biomaterials in nature for tissue engineering and related fields, including wound healing and cell–material interaction, have been widely used. For this purpose, we prepared the reinforced CS/nanocrystals cellulose-graft-poly( N -vinylcaprolactam) (CS/NCC-g-PVCL) nanofibers via the electrospinning technique. Fabricated nanofibers were characterized and studied for their structural, morphological, thermal stability, as well as mechanical and hydrophilic properties. Uniform nanofibers were achieved, and NCC-g-PVCL contents were partially embedded into CS nanofibers, as revealed in SEM analyses. Incorporation of NCC-g-PVCL contents (0.5, 2.5, and 5 wt%) enhanced the average fiber diameter of the obtained nanofibers from 100 nm (neat CS) to ∼ 350 nm [CS/NCC-g-PVCL (5 wt%)] and improved the nanofibers thermal stability. Additionally, among the CS/NCC-g-PVCL nanocomposite fibers, those loaded with 5 wt% NCC-g-PVCL had the best mechanical properties. The water contact angle of nanocomposite nanofibers increased with elevation of the weight content of NCC-g-PVCL. Cell culture results showed that the prepared nanofibers had better cytocompatibility and proliferation than neat CS nanofibers. The results proposed that the developed CS/NCC-g-PVCL nanocomposite nanofibers were promising as new biomaterials to be applied in the area of skin tissue engineering.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2019
·
IF 5.383
Xiaofang Zhang,Hong Li,Wei Zhang,Zhenjia Huang,Chi Pong Tsui,Canhui Lu,Chengen He,Yingkui Yang
Carbon aerogels are suffering from moderate specific capacitance and inferior energy density for the as-fabricated electric double-layer capacitors. Meanwhile, such aerogels are limited by mechanical brittleness and traditional process of high-cost templates and unsustainable precursors. Herein mechanically-robust and compressible carbon aerogels were readily fabricated by low-temperature lyophilization of the frozen aqueous suspension of bamboo cellulose nanofibers in liquid nitrogen followed by high-temperature pyrolysis . Free-standing carbon aerogels were further coated through in-situ oxidative polymerization of pyrrole , producing homogeneous core-sheath carbon aerogel/polypyrrole (PPy@CA) composites. The symmetrical supercapacitor using the PPy@CA electrodes delivers a specific capacitance of 268.5 F g −1 at 0.5 A g −1 and an energy density of 23.8 Wh Kg −1 at the power density of 450.4 W kg −1 . At an elevated current density of 10 A g −1 , the energy density remains as high as 19.6 Wh kg −1 at the highest power density of 8018.2 W kg −1 . Moreover, the supercapacitor retains 88% of its initial capacitance after running 10,000 cycles at 10 A g −1 . These excellent performances for PPy@CA are attributable to their electrically-conductive 3D carbon frameworks and interconnective porous channels capable of efficient diffusion of electrolyte ions, fast transport of electrons, and preserving structural stability. Such active nanocomposites are currently pursued as supercapacitor electrodes due to the synergistic effect between high power density of CAs and high energy density of pseudo-capacitive PPy.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Xiaoxiao Sun,Chao Liu,A.M. Omer,Wuhuan Lu,Shuxing Zhang,Xun Jiang,Hongjie Wu,Di Yu,Xiao-kun Ouyang
To develop relatively green and ecofriendly smart vehicles for colon-specific drug delivery, carboxymethyl cellulose (CMC) and chitosan (CS) pH-sensitive biopolymers were used in this study. To overcome the weaknesses of CMC carriers, such as poor mechanical performance and an explosive drug release, zinc oxide (ZnO) nanoparticles were incorporated into CMC beads and then coated with a CS layer via a self-assembly technique to form core–shell polyelectrolyte complexes. An anticancer drug, 5-fluorouracil (5-FU), used as a model drug, was loaded into ZnO/CMC/CS bio-nanocomposite beads. Fourier transform infrared spectroscopy , scanning and transmission electron microscopy , and thermogravimetric analysis were used to characterize the chemical structure, morphological changes, and thermal properties of the developed drug carrier, respectively. By studying their swelling and in vitro 5-FU release profiles under simulated gastrointestinal conditions, the pH sensitivity of the developed bio-nanocomposite hydrogel beads could be investigated. The obtained beads with reduced porosity could effectively encapsulate 5-FU and showed self-sustained release behavior depending on the concentrations of CMC, CS, and ZnO nanoparticles. The developed beads also demonstrated a capacity for biodegradation. The results indicated that the ZnO/CMC/CS bio-nanocomposite beads exhibited pH-sensitivity and could be applied efficiently as biodegradable carriers for colon-specific 5-FU delivery.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CELLULOSE
·
2019
·Vol. 26
·期 13
·8059-8071
·
IF 3.917
Xie Congxia,Qu Li,Yu Hailong,Yu Fengli,Yuan Bing,Yu Shitao,Nie Shuangxi
Abstract Ruthenium (Ru) nanoparticles synthesized using hydroxyethyl cellulose (HEC-Ru) were used to hydrogenate α-pinene in an aqueous medium. The results showed that HEC had a good dispersion effect on Ru nanoparticles and most of the particle sizes were ranged from 4 to 6 nm. The micelles formed with HEC appeared to act as “microreactors” in which the Ru nanoparticles had good stability and uniform distribution. In addition, α-pinene was loaded into the HEC micelles through hydrophobic interaction, resulting in good contact with Ru nanoparticles. Thereby, HEC-Ru nanoparticles significantly improved the hydrogenation of α-pinene, and 99.6% of α-pinene conversion and 98.6% of cis-pinane selectivity were obtained. Compared with the Pd/C, Ru/H 2 O, and HEC-Ru/ethanol catalyst systems, the HEC-Ru/H 2 O system had the maximum α-pinene conversion. In addition, considerable α-pinene conversion could be obtained after 10 times reuse with no fresh addition. Graphic abstract
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Xichan He,Keyong Tang,Xiumin Li,Fang Wang,Jie Liu,Fangfang Zou,Mengyuan Yang,Meixuan Li
Inspired by the mechanism of bone formation, a porous collagen-carboxymethyl cellulose/hydroxyapatite (Col-CMC/HA) composite was designed and fabricated using a biomimetic template of Col and CMC protein-polysaccharide bi-molecules. The morphology, composition and physical properties of Col-CMC/HA composites were characterized systematically. It was found that the nano-HA homogenously distributed on the surface of Col-CMC bi-templates while the composite presented 3D porous structure with pore size from 100 μm to 300 μm. The porosities of composites were located at the range of 71%–85%. Besides, the compressive strength of composites was highly depended on the ratio of Col to CMC in the organic template. The optimized composite in respect to physical properties showed a compressive strength as high as 7.06 MPa, quite close to that of natural bone. The high relative growth rate of wild-type mouse embryonic fibroblasts cells was found for the composite, indicating a good biocompatibility. The organic-inorganic composite also behaved good in collagenase resistance and could be biodegraded in 8 weeks, with about 50% of initial weight left at the ratio of Col to CMC of 1:9. The results demonstrated that the Col-CMC/HA composite by bi-molecular template method was a rational and safe method to prepare biomaterials with tunable properties.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2019
·
IF 6.97
Mei-Li Song,Hou-Yong Yu,Lu-Min Chen,Jia-Ying Zhu,Yan-Yan Wang,Ju-Ming Yao,Zhuanyong Zou,Kam Chiu Tam
A simple multibranch strategy was employed to increase the carboxyl contents on the cellulose nanocrystal (CNC) surface. The effects of various sequential grafting of ascorbic acid or citric acid on the morphology, microstructure, thermal stability, dye adsorption capability (methylene blue), and coagulation–flocculation capacity (model kaolin suspension) of the functionalized CNCs were investigated. Cellulose nanocrystals with multicarboxyl groups (CNC-g-AA-g-CA) showed better thermal stability (Tmax = 359.3 °C), and possessed the highest carboxylic groups of 4.073 mmol/g, which led to a high absolute ζ potential value up to 47.7 mV. Furthermore, the CNC-g-AA-g-CA exhibited excellent coagulation–flocculation capability to kaolin suspension with a turbidity removal rate of 91.07% and good cationic dye (methylene blue) removal rate of 87.8%, indicating that the CNC-g-AA-g-CA can be used as excellent adsorbent and efficient flocculants. In addition, CNC-g-AA-g-CA have good stabilizing effects on soybean oil/water Pickering emulsions, and the resultant Pickering emulsion volume can remain for 30 days or longer.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2019
·
IF 4.784
Shan Lu,Wenbin Liu,Yabo Wang,Yongkui Zhang,Panyu Li,Diyong Jiang,Cuiting Fang,Yonghong Li
Adsorbents from sustainable precursors are highly desirable for practical applications. In this study, carboxymethyl cellulose (CMC) and humic acid (HA) were adopted to fabricate a composite immobilized on precipitates of calcium hydroxide (PCH) and ferric hydroxide (PFH). The as-obtained adsorbent, denoted as HA-CMC/PMH (PCH and PFH were referred to as PMH), was analyzed by infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy and thermo gravimetric analysis. When applying for a typical organic pollutant of methylene blue (MB) removal from aqueous solution, a high adsorption capacity of 666.67 mg/g was achieved over HA-CMC/PMH. The adsorption mechanisms of MB involved ion exchanging and π–π interactions, this adsorption process mainly occurred on both anionic and aromatic groups. Adsorption behavior analysis indicated that Langmuir isotherm model and pseudo-second order kinetic model fitted experimental data well, suggesting a mono-layer adsorption of MB onto the adsorbent. Further thermodynamic analysis proved that the adsorption of MB onto HA-CMC/PMH was an exothermal spontaneous process. The developed adsorbent is also reusable with 79.93% of adsorption capacity remaining in the fifth recycle runs. Therefore, the adsorbent of HA-CMC/PMH is suggested to be a promising candidate for adsorption applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CELLULOSE
·
2019
·Vol. 26
·期 9
·5305-5319
·
IF 3.917
Bai Liangjiu,Jiang Xinyan,Sun Zhixiang,Pei Zhaoxia,Ma Anyao,Wang Wenxiang,Chen Hou,Yang Huawei,Yang Lixia,Wei Donglei
Abstract Self-healing hydrogels with excellent toughness and mechanical strength are particularly desirable for practical application. In this paper, green and environmentally friendly cellulose nanocrystals (CNCs) were successfully modified on the surface via metal-free photoinduced electron transfer atom transfer radical polymerization (PET-ATRP). Surface-initiated PET-ATRP was achieved by using 4-vinylpyridine (4VP) as functional monomer, 10-phenylphenothiazine (Ph-PTZ) as photocatalyst and ultraviolet light (365 nm) as light source, respectively. The prepared P4VP-CNCs hybrid materials (CNCs@P4VP) were used as green reinforcement to obtain self-healing nanocomposite hydrogels by electrostatic interactions. As a result, the nanocomposite hydrogels displayed outstanding mechanical (6.6 MPa at a strain of 921.6%) and self-healing (85.9% after repairing 6 h) properties. This work provides a promising green method for designing novel self-healing nanocomposite hydrogels with high strength. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子