Water
·
2019
·Vol. 11
·期 12
·2639
·
IF 2.524
Chi Wang,Zhian Ying,Ming Ma,Mingxin Huo,Wu Yang
The utilization of reclaimed water is a reliable and sustainable approach to enhance water supply in water-deficient cities. However, the presence of micro-organic pollutants (MPs) in reclaimed water has potential adverse effects on aquatic ecosystems and human health. In this study, we investigated the occurrence of 12 target MPs in the influent and reclaimed water collected from a local wastewater treatment plant, and the ultraviolet (UV)–chlorine process was applied to analyze its ability to remove MPs. The results showed that all 12 MPs were detected in both the influent and the reclaimed water, with the concentrations ranging from 25.5 to 238 ng/L and 8.6 to 42.5 ng/L, respectively. Over 52% of all the target MPs were readily degraded by the UV–chlorine process, and the removal efficiency was 7.7% to 64.2% higher than the corresponding removal efficiency by chlorination or UV irradiation only. The degradation efficiency increased with the increasing initial chlorine concentration. The pH value had a slight influence on the MP degradation and exhibited different trends for different MPs. The formation of known disinfectant byproducts (DBPs) during the UV–chlorine process was 33.8% to 68.4% of that in the chlorination process, but the DBPs’ formation potentials were 1.3 to 2.2 times higher. The toxicity assay indicated that UV–chlorine can effectively reduce the toxicity of reclaimed water.Keywords:MPs;UV–chlorine process;disinfectant byproducts;toxicity
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2019
·
IF 7.65
Dong Wen,Wentao Li,Jinrong Lv,Zhimin Qiang,Mengkai Li
This study investigated methylene blue (MB) degradation by the vacuum-ultraviolet/ultraviolet/persulfate (VUV/UV/PS) process using a mini-fluidic VUV/UV photoreaction system. Results show that MB degradation by the VUV/UV/PS process was significantly higher than that of the conventional UV/PS process, as the VUV photolysis of H 2 O and PS generated more reactive oxygen species (ROSs). HO • and SO 4 •− , identified as the main ROSs, were mostly consumed by dissolved organic carbon and Cl ‒ in real waters, respectively. Additionally, the impacts of solution pH and the concentrations of PS, humic acid, and inorganic ions (HCO 3 ‒ , Cl ‒ , NO 3 ‒ , SO 4 2‒ , Fe(II), and Fe(III)) were systematically evaluated. The solution pH significantly affected the photon absorption distributions, as well as the contributions of photolysis and oxidation to MB degradation, resulting in different variations in the degradation rate constant and total organic carbon removal ratio with increasing solution pH. At all tested pH levels (3.0–11.0), particularly under acidic conditions, HO and SO 4 − were two predominant contributors to MB degradation, while VUV and UV photolysis contributed more when the solution pH increased. This study provides a highly efficient process for organic pollutant removal, which could be applied in water treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF PHARMACEUTICS
·
2019
·
IF 4.213
Xin Jin,Jianping Zhou,Zhenhai Zhang,Huixia Lv
Synergistic combination therapy involving the integration of chemotherapeutics and chemosensitizers into micelles has demonstrated great potential for tumor-specific location release. Here, the natural product betulinic acid (BA) and chemical drug lonidamine (LN) were used as chemosensitizers in combination with doxorubicin (DOX) for ovarian cancer treatment. We designed pH-sensitive peptide derivatives and constructed an all-in-one multifunctional multidrug pH-sensitive targeting delivery system for the synergistic co-delivery of DOX and BA (or LN). The combination of DOX and BA was found to elicit better therapeutic effects and lower cardiotoxicity than the DOX and LN combination in Skvo3 cells. Further, loading DOX/BA into the present micellar systems enabled burst release at the tumor location, leading to enhanced anti-tumor effects and reduced off-target effects. More importantly, DOX/BA micelles elicited fewer adverse effects on cardiac function and leukocyte counts in Skvo3 subcutaneous xenograft models. These features suggest that the designed micelles represent a promising multifunctional strategy for the efficient treatment of ovarian cancer.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MACROMOLECULAR CHEMISTRY AND PHYSICS
·
2019
·Vol. 220
·期 23
·1900399
·
IF 2.622
Shoukang Du,Xiaojin Chen,Xiaofei Chen,Shengke Li,Guoliang Yuan,Tianle Zhou,Jianliang Li,Yang Jia,Dangsheng Xiong,Huaping Tan
Wound dressings with pH-sensitive properties, stable mechanical performance, and antibacterial properties have great potential for clinical applications. Herein, drug-loaded microgels via Schiff-base reaction between carboxymethyl chitosan and oxidized carboxymethyl cellulose are fabricated. Then they are embedded in hydrogels to form a hydrogel-microgels composite (Gel/MGs). The gelation time, morphologies, swelling ratio, weight loss ratio, mechanical properties, pH-sensitive drug release profiles, and antibacterial activities are examined. Adding microgels endows the hydrogels with more stable properties, enhanced mechanical performance, and drug release sensitivity to both acid and alkali in vitro. Gel/MGs dressings show a steady mass after 6 h and even maintain its 95.4% initial mass after 14 days in pH 7.4. In pH 9.5, Gel/MGs dressings also show a higher cumulative release of silver sulfadiazine than that in pH 7.4 and pH 5.5. Gel/MGs/AgSD dressings demonstrate desirable antibacterial properties, which may ensure their potential application in wound dressing.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Jiaojie He,Yuhong Xu,Wei Wang,Bo Hu,Zijie Wang,Xin Yang,Yu Wang,Liwei Yang
A series of hierarchical micro/nano Ce-based composites were derived from Ce-MOF via thermal treatment in N 2 atmosphere. Different from conventional complete decomposed materials, forming cerium oxide in air, Ce-MOF that calcinated in N 2 at lower temperatures (400 °C or 500 °C) showed a partial thermal decomposition with high percent content of Ce(III). Even though the complete decomposed products held higher surface areas, the partial decomposed samples exhibited extremely higher phosphate uptake, with working capacity 2–4 times higher than that of ceria. The results implied a predominant effect of different valence states on phosphate removal by Ce-based materials, in which Ce(III) species were demonstrated playing the major role to form binding with phosphate. The maximum adsorption capacity (189.4 mg/g) was achieved by Ce-MOF-500(S) with wide applicable scope of pH ranging from 2 to 12 and great selectivity for phosphate in the presence of competing anions. Remarkably, Ce-MOF-500(S) described obvious enhanced phosphate adsorption ability under alkaline condition. This was due to the fact that the hydrolyzed Ce(III) species brought more active sites in the form of hydroxyl groups for ligand exchange with phosphate. Furthermore, based on the analysis of FTIR, XPS, XRD and zeta potential, electrostatic attraction, ligand exchange and surface precipitation were confirmed as the main adsorption mechanisms for partial decomposed samples, while electrostatic attraction was the main mechanism for complete decomposed samples.
✓ 已验证
产品关联
DOI
高影响因子
ACS Biomaterials Science & Engineering
·
2019
·
IF 4.511
Quan Wang,Dongqin Lei,Fan Chen,Yuanwei Chen,Xianglin Luo
Although smart polymer micelles able to respond to the tumor acid microenvironment are potential anticancer drug carriers, fruitful clinical application of these carriers is inadequate. For the purpose of finding the origin of the unsatisfactory therapeutic efficacy of pH-sensitive drug carriers with tertiary amine groups, we newly designed and synthesized poly{α-[4-(diethylamino)methyl-1,2,3-triazol]-caprolactone-co-caprolactone}-b-poly(2-methacryloyloxyethyl phosphorylcholine) (PDCL-PMPC), a biomimetic phosphorylcholine polymer with pH-ensitive groups. PDCL-PMPC self-assembles into small and uniform micelles as its counterpart poly(caprolactone)-b-poly(2-methacryloyloxyethyl phosphorylcholine) (PCL-PMPC) without pH-sensitive groups. The in vitro and in vivo properties of PDCL-PMPC and PCL-PMPC micelles are investigated in detail. PDCL-PMPC micelles display obvious pH sensitivity by micelle change and fast drug release at pH 5, but the insensitive micelles do not. The internalization of PDCL-PMPC micelles by tumor cells is stronger than that of PCL-PMPC micelles. However, in comparison with the insensitive micelles, the pH-sensitive micelles present much shorter blood circulation time in pharmacokinetics and demonstrate worse accumulation in the tumor site in vivo study. As a result, DOX loaded PCL-PMPC micelles demonstrate much better antitumor efficiency than pH-sensitive micelles. Furthermore, DOX loaded PCL-PMPC micelles show similar therapeutic efficacy to DOX·HCl but with considerably lower side effects.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Polymers
·
2019
·Vol. 11
·期 3
·511
·
IF 3.164
Jingjie Feng,Weiqiu Wen,Yong-Guang Jia,Sa Liu,Jianwei Guo
One of the most famous anticancer drugs, paclitaxel (PTX), has often been used in drug controlled-release studies. The polymers derived from bio-compound bile acids and degradable poly(ε-caprolactone) (PCL) form a reservoir and have been used as a drug delivery system with great advantages. Herein, we grafted poly(N,N-diethylaminoethyl methacrylate) and poly(poly(ethylene glycol) methyl ether methacrylate) into the bile acid-derived three-armed macroinitiator CA-(PCL)3, resulting in the amphiphilic block copolymers CA-(PCL-b-PDEAEMA-b-PPEGMA)3. These pH-responsive three-armed block copolymers self-assembled into micelles in aqueous solution and PTX was encapsulated into the micellar core to form PTX-loaded micelles with a drug loading of 29.92 wt %. The micelles were stable in PBS at pH 7.4 and showed a pH-triggered release behavior of PTX under acidic environments, in which 55% of PTX was released at pH 5.0 in 80 h. These cholic acid-based functionalized three-armed block polymers present good biocompatibility, showing great potential for drug controlled-release.Keywords:cholic acid;pH-sensitive;PTX;drug delivery
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Soft Matter
·
2019
·Vol. 15
·期 27
·5529-5536
·
IF 3.399
Han Jia,Xu Leng,Peng Lian,Yugui Han,Qiuxia Wang,Shaoyan Wang,Tunan Sun,Yipu Liang,Pan Huang,Kaihe Lv
Additional HCl can facilely control the dynamic noncovalent interaction between anionic surfactant sodium dodecyl benzene sulfonate (SDBS) and additional organic matter, 4,4′-oxydianiline (ODA), at the water/oil interface. At low HCl concentration (ODA/HCl molar ratio (r) = 1 : 1.5, [ODA] = 250 mg L−1), the ODA+ ions effectively enhanced the SDBS ability to reduce the water/oil interfacial tension (IFT) by about two orders of magnitude, while the (SDBS)2/ODA2+ gemini-like surfactants could be constructed at a relatively high HCl concentration (r = 1 : 4, [ODA] = 250 mg L−1), which could largely reduce the IFT to 1.19 × 10−3 mN m−1. Molecular simulation was employed to explore the interfacial activity of ODAn+ (ODA+/ODA2+) ions and the SDBS/ODAn+ interaction. The control experiments used another three surfactants to verify the proposed model. The pH-switchable gradual protonation of amino groups in ODA molecules determined the SDBS/ODA interfacial assembly, which was responsible for the reversal of IFT variations and the related emulsion behaviors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMOSPHERE
·
2019
·
IF 5.108
Meng Li,Dong Wang,Xiaoduo Liu,Jingmei Sun
Quinones are becoming an essential tool for refractory organics treatment, while their quantification may be not well-considered. In this paper, two kinds of potential errors in quantification were evaluated in multiple pH conditions. They were derived from the coexistence of oxidized/reduced quinone species (Type I) and pH-sensitive feature (Type II), respectively. These errors would remarkably influence the accuracy of quantification while they haven't been emphasized. Thus, to elaborate the relationship between the two types of errors and the absorbance or pH conditions, three typical quinones [Anthraquinone-1-sulfonate (α-AQS), anthraquinone-2,6-disulfonate (AQDS) and lawsone] were selected and their acid dissociation coefficients (p K a) as well as UV–Vis spectra were determined. Results revealed that, for Type I, the relative error (RE) of α-AQS concentration would exceed the limit (5%) when reduced α-AQS was below 48% of total α-AQS. Similar results were found for lawsone. However, the RE can be eliminated by the equation established in this paper. For Type II, the pH-sensitive feature was related to the p K a values of quinones. Absorbances of α-AQS and lawsone would change remarkably with pH variation. Therefore, a model for correction was established. Analog data showed high consistency with experimental data [ r = 0.995 ( n = 25, p < 0.01) and r = 0.997 ( n = 36, p < 0.01), for lawsone and α-AQS respectively]. Especially, the determination of AQDS concentrations was noticed to be pH-independent at 437 nm under pH 4.00 to 9.18 conditions. Based on these features, a comprehensive data solution was proposed for handling these errors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Xingdong Shi,Yitao Li,Zhi Zhang,Lei Sun,Yazhou Peng
The appearance of large amounts of antibiotics in drinking water and wastewater treatment plants has attracted extensive interest because of the potential resultant environmental and biological risks. Although the Fe(II)/peroxymonosulfate (PMS) system provides a feasible method for antibiotic degradation, the narrow pH range in which it operates and the resultant iron precipitation limit its use. In this study, protocatechuic acid (PCA) was introduced into the Fe(II)/PMS system to improve the system performance. Ciprofloxacin (CIP) was used as the probe reagent. Compared with the Fe(II)/PMS system, the Fe(II)/PCA/PMS system performed better for CIP degradation. This enhanced degradation was attributed mainly to the reduction and chelating ability of the PCA, which enhanced radical generation by accelerating the transformation from Fe(III) to Fe(II) and by forming the PCA-Fe chelate. The Fe(II)/PCA/PMS system also showed a superior degradation ability, even under alkaline conditions, because the PCA-Fe chelate protected iron from precipitation and released hydrogen ions continuously in the process. The electron paramagnetic resonance and alcohol-quenching tests indicated that sulfate and hydroxyl radicals existed in this system and two main CIP degradation pathways were proposed from the liquid chromatography-mass spectrometry results. This work aims to provide new ideas for refractory organics treatment.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Lian Zhang,Yue Zhang,Xuyan Gao,Chunhua Xu
Recent studies showed that Fe(II) acts as the major electron donor when sulfidated zero-valent iron (S-ZVI) is used for reductive removal of pollutants. However, few studies have focused on the utilization efficiency and regeneration rate of Fe(II). In this work, the dynamic interaction between pH and S-ZVI for Cr(VI) removal and Fe(II) production was investigated at several pH levels. It was found that the maximum utilization efficiency and regeneration rate of Fe(II) was obtained at pH 5, which is consistent with the Cr(VI) removal by S-ZVI. To further study the role of Fe(II) in Cr(VI) reduction, an innovative binary correlation analysis between aqueous Cr(VI) and Fe(II) was applied with the addition of 1,10-phenanthroline as a way to control Fe(II) availability for Cr(VI) reduction. The analysis revealed that the Cr(VI) sequestration was initially controlled by Fe 0 /FeS and then by Fe(II), which accounts for the majority of the Cr(VI) sequestration. Additionally, the effects of several operational parameters (e.g., S/Fe ratio, S-ZVI dosage and initial concentration of Cr(VI)) on Cr(VI) removal were also evaluated and the results indicated that the removal of Cr(VI) exhibited a bimodal pattern with increasing S/Fe ratio, but followed a unimodal pattern with increase of S-ZVI dosage and chromium concentration. This study sheds additional insight into the dynamic interaction between pH and Fe(II), which is significant for further improving the efficiency of Fe(II) on contaminants.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2019
·
IF 4.084
Yini Fang,Ting Zhang,Yudong Wu,Yuanjian Liu,Jibiao Guan,Xiangheng Du,Lina Wang,Ming Zhang
High purity H 2 formed by electrochemical water splitting is profound potential green energy. Exploiting advanced electrocatalysts for hydrogen evolution reaction (HER) in both acidic and base environment is of critical significance. Herein, we report a novel hybrid comprising stacked cobalt tungsten carbides nanocrystals on N-doping carbon matrix (Co 6 W 6 C–N@CNFs) as a superb HER catalyst over the entire pH range via facile electrospinning and CVD method. On account of its ultrathin size and the strong synergetic interaction between bimetals , coupled with the superior conductivity of N-doping CNFs , Co 6 W 6 C–N@CNFs presents superior catalytic properties , with low overpotentials of 86 and 116 mV at η 10 and small Tafel slopes of 85 and 101 mV dec −1 in acidic and alkali, respectively, as well as outstanding long-term stability, rivalling its potential to be used intensively in water electrolysis technologies.
✓ 已验证
产品关联
DOI
高影响因子