Nature Sustainability
·
2021
·Vol. 4
·期 7
·618-626
·
IF 19.346
Chen Yao,Xu Mengjiao,Wen Jieya,Wan Yu,Zhao Qingfei,Cao Xia,Ding Yong,Wang Zhong Lin,Li Hexing,Bian Zhenfeng
Precious metals such as gold and platinum are valued materials for a variety of important applications, but their scarcity poses a risk of supply disruption. Recycling precious metals from waste provides a promising solution; however, conventional metallurgical methods bear high environmental costs and energy consumption. Here, we report a photocatalytic process that enables one to selectively retrieve seven precious metals—silver (Ag), gold (Au), palladium (Pd), platinum (Pt), rhodium (Rh), ruthenium (Ru) and iridium (Ir)—from waste circuit boards, ternary automotive catalysts and ores. The whole process does not involve strong acids or bases or toxic cyanide, but needs only light and photocatalysts such as titanium dioxide (TiO 2 ). More than 99% of the targeted elements in the waste sources can be dissolved and the precious metals recovered after a simple reducing reaction that shows a high purity (≥98%). By demonstrating success at the kilogram scale and showing that the catalysts can be reused more than 100 times, we suggest that this approach might be industry compatible. This research opens up a new path in the development of sustainable technologies for recycling the Earth’s resources and contributing to a circular economy.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2021
·Vol. 413
·期 11
·3005-3015
·
IF 4.157
Mou Xiaoxuan,Li Xiaoshui,Qin Shibin,Li Huan,Qi Shihua
Exploring commercial and inexpensive sorbents for extraction of organic pollutants is still an active area of research. Ultrahigh molecular weight polyethylene sieve plate (UMPESP) is a commercially available, low-cost, and porous frit, which has been widely used in solid-phase extraction cartridges to fix the filling materials. In this work, UMPESP was investigated for the extraction of polycyclic aromatic hydrocarbons (PAHs) from water samples. The desorption and sorption efficiencies of UMPESP were first evaluated and compared with two previously reported sorbents, low-density polyethylene plastic pellet (LDPEP) and silicone rod (SR). The comparative results showed that quantitative desorption of analytes from UMPESP, which could be easily achieved with 2 × 1.5 mL n -hexane, was more effective than that of LDPEP (>6 × 1.5 mL n -hexane) and comparable to that of SR. Additionally, shorter equilibrium time was rendered by UMPESP (shaking for 120 min) compared with SR (>480 min), due to the porous structure and larger surface area of the former. Different parameters that affect the extraction efficiency, including organic modifier, ionic strength, and pH value, were then studied. The optimized method coupled with gas chromatography–mass spectrometry afforded good linearity in a concentration range of 10–5000 ng L −1 (except acenaphthene in the range of 25–5000 ng L −1 ) with coefficients of determination ranging from 0.9957 to 0.9995 and relative standard deviations below 13.8%. The limits of detection and quantification were 0.04–3.35 ng L −1 and 0.13–11.16 ng L −1 , respectively. Finally, the method was successfully applied to determine PAHs in real water samples, and the results showed no statistically significant difference with the concentrations derived from liquid–liquid extraction. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2021
·Vol. 23
·期 3
·1-11
·
IF 2.253
Lou Xue,Yao Lianfei,Wang Liangyu,Chi Xiaochun,Wang Wenyan,Sui Ning,Zhang Hanzhuang,Xu Wen,Pan Lingyun,Zhou Qiang,Wang Yinghui
2D transition metal dichalcogenides (TMDCs) nanocrystals and related semiconductor–metal heterostructures are promising new materials for efficient opto-electrical conversion because of their unique physical and chemical properties. The design and optimization of such materials require the understanding of exciton and charge carrier dynamics. The illumination-dependent carrier dynamics of CdS/MoS 2 heterostructure nanocrystals (CdS/MoS 2 HNCs) film is investigated by employing the voltage-current test, in which the CdS nanocrystals (NCs) film is used as a reference. The photocurrent performance of carriers in the CdS/MoS 2 HNCs is 70 times higher than that in CdS NC film, owing to the excellent interfacial hole transfer from the CdS component to the monolayer MoS 2 in CdS/MoS 2 HNCs, which effectively reduces the bulk and surface charger recombination. It means that the remaining electron in CdS component after hole transfer plays an important role in the final photocurrent performance. The annealing effect also plays a positive role in the photocurrent performance of nanocrystal film for CdS/MoS 2 HNC and CdS NC film. In addition, the transient absorption test is also used to exclude the possibility of interfacial electron transfer. The final results suggest that the construction of nano-heterojunction can affect the carrier dynamics of nanomaterials and enhance light responsiveness, which is conductive to the design and application of photovoltaic devices in the future.
✓ 已验证
产品关联
DOI
高影响因子
Scientific Reports
·
2021
·Vol. 11
·期 1
·1-11
·
IF 4.38
Gao Yihan,Li Dian,Ru Jiexiong,Yang Muyun,Lu Lehua,Lu Li,Wu Jinlu,Huang Zhonghui,Xie Yan,Gao Naiping
A mathematical model based on heat and mass transfer processes in the porous wick of electronic cigarettes was established to describe the atomization of e-liquids according to max liquid temperature, vaporization rate and thermal efficiency in a single puff. Dominant capillary-evaporation effects were defined in the model to account for the effects of electrical power, e-liquid composition and porosity of the wick material on atomization and energy transmission processes. Liquid temperature, vaporization rate, and thermal efficiency were predicted using the mathematical model in 64 groups, varying with electrical power, e-liquid composition and wick porosity. Experimental studies were carried out using a scaled-model test bench to validate the model’s prediction. A higher PG/VG ratio in the e-liquid promoted energy transfer for vaporization, and the e-liquid temperature was comparatively reduced at a relatively high power, which was helpful to avoid atomizer overheating. Compared with the other factors, wick porosity affected the thermal efficiency more significantly. The vaporization rate increased with a higher wick porosity in a certain range. The modelling results suggested that a greater wick porosity and a higher PG ratio in e-liquids helped to improve the overall thermal efficiency.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2021
·Vol. 32
·期 10
·13305-13322
·
IF 2.478
Gu Yufen,Guo Bobo
Here, the novel Ag 2 MoO 4 /Bi 2 WO 6 (AMO/BWO) heterojunction composite photocatalysts were synthesized based on the combination (co-precipitation method + hydrothermal method) XRD, XPS, SEM, TEM, UV–Vis DR spectroscopy, PL spectroscopy, FTIR spectroscopy, as well as EIS analyses were employed to characterize the photocatalysts, and photocurrent response was utilized to confirme the formation of Z-type heterojunction. The generation and transfer of electron/holes in the AMO/BWO heterojunctions excited by simulated sunlight were analyzed. Under simulated sunlight, the photocatalytic performance of AMO/BWO composites were studied by degradation of organic pollutants. The experimental results show that the 30 wt% AMO@BWO is the best photocatalytic composite material among all samples and the degradation rate reached 98.6%. Due to the prolonging of lifetime of the photoexcited electrons in the CB of AMO and holes in the VB of BWO, these carriers are more effective to participate in photodegradation reactions. An electron/hole transfer mechanism of the Z-scheme heterojunctions is proposed to illustrate the enhanced photodegradation performance of the AMO/BWO composite samples.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2021
·Vol. 28
·期 5
·1315-1324
·
IF 2.496
Cai Qiang,Yue Xiaoyang,Dong Wen-Sheng
Bimetallic modified Fe–Sn/Beta was synthesized and examined as a solid acid catalyst for the transformation of glucose into methyl lactate in methanol. The catalysts were characterized by a combined characterization techniques i.e. X-ray fluorescence spectroscopy, N 2 physisorption, powder X-ray diffraction, X-ray photoelectron spectroscopy, NH 3 temperature-programmed desorption, and pyridine adsorption Fourier transform infrared spectroscopy. A high yield of methyl lactate of 67% was achieved upon conversion of 0.3 g glucose in 24 g methanol over 0.15 g catalyst at 220 ℃ under 2 MPa N 2 for 6 h. The recyclability of the catalyst was also investigated, and the conversion of glucose remained constant; conversely, the yield of methyl lactate decreased slightly in five catalytic runs. The excellent catalytic performance of Fe–Sn/Beta was attributed to the presence of large amounts of Lewis acid sites. Besides, the rich mesoporosity in Fe–Sn/Beta improved mass transfer rates in the conversion of glucose to alkyl lactates.
✓ 已验证
产品关联
DOI
高影响因子
Nano Research
·
2021
·Vol. 15
·期 1
·446-451
·
IF 8.897
Yu Yongsheng,He Lin,Xu Junjie,Li Jiaming,Jiang Sida,Han Guanghui,Jiang Baojiang,Lei Wenjuan,Yang Weiwei,Hou Yanglong
The ordered Pt-based intermetallic nanoparticles (NPs) with small size show superior magnetic or catalytic properties, but the synthesis of these NPs still remains a great challenge due to the requirement of high temperature annealing for the formation of the ordered phase, which usually leads to sintering of the NPs. Here, we report a simple approach to directly synthesize monodisperse ordered L1 0 -FePt NPs with average size 10.7 nm without further annealing or doping the third metal atoms, in which hexadecyltrimethylammonium chloride (CTAC) was found to be the key inducing agent for the thermodynamic growth of the Fe and Pt atoms into the ordered intermetallic structure in the synthetic process. In particular, 10.7 nm L1 0 -FePt NPs synthesized by the proper amount of CTAC show a coercivity of 3.15 kOe and saturation magnetization of 45 emu/g at room temperature. The current CTAC-assisted synthetic strategy makes it possible to deeply understand the formation of the ordered Pt-based intermetallic NP in solution phase synthesis.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2021
·Vol. 188
·期 2
·1-10
·
IF 5.833
Zhou Xi,Wang Shuangling,Zhang Cong,Lin Yulong,Lv Jie,Hu Shuyang,Zhang Shanshan,Li Meng
A sensitive and rapid colorimetric biosensor has been developed for determination of amyloid-β peptide (Aβ) and study of amyloidogenesis based on the high peroxidase-like activity of porous bimetallic ZnO-Co 3 O 4 nanocages (NCs). Due to the high binding ability of Aβ monomer to ZnO-Co 3 O 4 NCs, the catalytic activity of ZnO-Co 3 O 4 NCs can be significantly suppressed by Aβ monomer. This finding forms the basis for a colorimetric assay for Aβ monomer detection. The detection limit for Aβ monomer is 3.5 nM with a linear range of 5 to 150 nM ( R 2 = 0.997). The system was successfully applied to the determination of Aβ monomer in rat cerebrospinal fluid. Critically, the different inhibition effects of monomeric and aggregated Aβ species on the catalytic activity of ZnO-Co 3 O 4 NCs enabled the sensor to be used for tracking the dynamic progress of Aβ aggregation and screening Aβ inhibitors. Compared with the commonly used thioflavin T fluorescence assay, this method provided higher sensitivity to the formation of Aβ oligomer at the very early assembly stage. Our assay shows potential application in early diagnosis and therapy of Alzheimer's disease (AD).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ANTIBIOTICS
·
2021
·Vol. 74
·期 5
·330-336
·
IF 2.649
Lan Sugui,Li Zhirong,Su Aiqiu,Peng Yanhong,Liao Yanke,Liu Xuemei,Tan Qiang
The purpose of this study was focused on the mechanisms of the cross-resistance to tetracycline (TET), piperacillin Sodium (PIP), and gentamicin (GEN) in Staphylococcus aureus (SA) mediated by Rhizoma Coptidis extracts (RCE). The selected strains were exposed continuously to RCE at the sublethal concentrations for 12 days, respectively. The susceptibility change of the drug-exposed strains was determined by analysis of the minimum inhibitory concentration. The 16S rDNA sequencing method was used to identify the RCE-exposed strain. Then the expression of resistant genes in the selected isolates was analyzed by transcriptome sequencing. The results indicated that RCE could trigger the preferential cross-resistance to TET, PIP, and GEN in SA. The correlative resistant genes to the three kinds of antibiotics were upregulated in the RCE-exposed strain, and the mRNA levels of the resistant genes determined by RT-qPCR were consistent with those from the transcriptome analysis. It was suggested from these results that the antibacterial Traditional Chinese Medicines might be a significant factor of causing the bacterial antibiotic-resistance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nano-Micro Letters
·
2021
·Vol. 13
·期 1
·1-14
·
IF 16.419
Su Die,Pei Yi,Liu Li,Liu Zhixiao,Liu Junfang,Yang Min,Wen Jiaxing,Dai Jing,Deng Huiqiu,Cao Guozhong
The unique wire-in-wire structure endows TiO 2 /C nanofibers film with superior mechanical flexibility.
The wire-in-wire TiO 2 /C nanofibers (TiO 2 ww/CN) film shows outstanding electrochemical performances as free-standing anodes for Li/K-ion batteries and full cells.
The TiO 2 ww/CN film shows an extremely high pseudocapacitance contribution ratio in K-ion batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
BIOPROCESS AND BIOSYSTEMS ENGINEERING
·
2021
·Vol. 44
·期 8
·1781-1792
·
IF 3.21
Jin Li-Qun,Chen Xian-Xiao,Jin Yi-Ting,Shentu Jun-Kang,Liu Zhi-Qiang,Zheng Yu-Guo
To improve the operational stability of glucose isomerase in E. coli TEGI-W139F/V186T, the immobilized cells were prepared with modified diatomite as a carrier and 74.1% activity of free cells was recovered after immobilization. Results showed that the immobilized cells still retained 86.2% of the initial transformational activity after intermittent reused 40 cycles and the yield of D-fructose reached above 42% yield at 60 °C. Moreover, the immobilized cells were employed in the continuous production of High Fructose Corn Syrup (HFCS) in a recirculating packed bed reactor for 603 h at a constant flow rate. It showed that the immobilized cells exhibited good operational stability and the yield of D-fructose retained above 42% within 603 h. The space–time yield of high fructose corn syrup reached 3.84 kg L −1 day −1 . The investigation provided an efficient immobilization method for recombinant cells expressing glucose isomerase with higher stability, and the immobilized cells are a promising biocatalyst for HFCS production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CELLULOSE
·
2021
·Vol. 28
·期 8
·5123-5134
·
IF 5.044
Shen Yanqin,Yao Yijun,Wang Zhongliang,Wu Hailiang
A series of hydroxypropylated starch (HPS) that can be dissolved in water at 60–65 °C was obtained via two-step method in water system from corn starch. The structure and property of the HPS and its gelatinization temperature were characterized by Fourier transform infrared spectrometer, nuclear magnetic resonance spectroscopy ( 1 H NMR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and transmission electron microscope (TEM). It was concluded that hydroxypropyl mainly bonded on the hydroxyl group at C 2 position from glucose residue of starch in the form of C–O–C, and the substitution level at C 6 position was slightly higher than that at C 3 position, as well as the crystallinity of starch decreased from 52.41% to 29.4% due to the introduction of hydroxypropyl and was confirmed by XRD. At the same time, the grooves on the surface of starch granules were observed by SEM. The above-mentioned two synergies promoted the permeation and transmission of water molecules in the starch microstructure. Moreover, the gelatinization temperatures and enthalpy of synthetic HPS were lower than those of raw corn starch, as further confirmed by DSC. This caused the HPS with a molar substitution greater than 0.1 to be soluble in water at 65 °C, and its dissolution state was similar to that of HPS at 95 °C (transmittance above 55%), as well as exhibited high slurry stability. Interestingly, compared with the raw starch, the HPS film showed excellent tensile strength and elongation at the relative humidity of 65%, which could be attributed to the hydrophilic ether bond and the flexible alkyl chain bonded on the structure of starch. This study will provide a new way for the preparation of high performance starch size for sizing yarn at medium–low temperature. Graphic abstract
✓ 已验证
产品关联
DOI
高影响因子