Science of Advanced Materials
·
2019
·Vol. 11
·期 3
·418-424
·
IF 1.158
Lv Yao,Huang Shifei,Zhao Yufeng
The N-B-F tridoping 3D hierarchical porous graphitized carbon network is produced by a one-step synthesis using chitosan as a precursor. The N-B-F tridoping 3D hierarchical porous graphitized carbon network is rich of nitrogen, boron and fluorine hetero atoms and exhibited relatively
high specific capacitance value of 316 F g–1 in 6 M KOH at a current density of 20.0 A g–1. As well as good cycling stability with capacitance retention of 100% over 10000 cycles, and good rate performance (90.3% capacity retention from 0.5 A g–1
to 20.0 A g–1). When used as supercapacitor electrode, the all carbon symmetric supercapacitor based on N-B-F tridoping 3D hierarchical porous graphitized carbon network delivers a high energy density of 23.87 Wh kg–1, outperforming the state-of-the-art carbon
material.
✓ 已验证
DOI
高影响因子
Nano Energy
·
2019
·
IF 15.548
Mingzhen Hou,Yongting Qiu,Guanfusheng Yan,Jinming Wang,Da Zhan,Xiang Liu,Jingchang Gao,Linfei Lai
N -doped hollow carbon nanospheres (NHCS) with mesoporous carbon shells is selected as nanoreactors and encapsulated with few-layered MoS 2 nanosheets to monitor its electrochemical properties and structural conversion in long-term cycling. Mesoporous walls of NHCS can facilitate electrolyte penetration and provide conductive shells for superior mass diffusion and charge transfer. When serving as SIB anodes, MoS 2 @NHCS has a capacity value of 371 mAh g -1 at 1 A g -1 with a capacity retention of 94.9% after 100 cycles which is higher than powder form MoS 2 and is among the highest values of earlier reported MoS 2 electrodes. The origin of gradual capacity decay of MoS 2 @NHCS anodes in-between 50 to 150 cycles has been investigated. Transmission electron microscopy and ex-situ X-ray diffraction have shown significant morphology change of space-confined MoS 2 and the production of MoO 3 together with oxygen-deficient MoO x after continuous charge/discharge test. After long-term cycle test of MoS 2 @NHCS, the ratios of Mo 6+ and Mo 5+ increased significantly with the decreasing of Mo 4+ ratio, while the sulfur from MoS 2 transformed from S 2− to SO 4 2− . This work highlight the phase transformation and composition change of MoS 2 for MoS 2 -based anode in long-duration charge/discharge tests.
✓ 已验证
DOI
高影响因子
ACS Omega
·
2019
·
IF 2.584
Lili Geng,Jianjun Gong,Guilong Qiao,Songshou Ye,Jinbao Zheng,Nuowei Zhang,Binghui Chen
Pt(NH3)4(NO3)2, Pt(NH3)4(Ac)2, (NH4)2PtCl4, and H2PtCl6 were used to prepare Pt/SAPO-11 catalysts to investigate the effect of Pt precursors on the hydroisomerization of n-dodecane. The catalyst derived from Pt(NH3)4(NO3)2 displays the best hydroisomerization activity and selectivity among these precursors. The hydroisomerization conversion of n-dodecane is affected by the platinum particle size, platinum dispersion, the location of platinum, and the valence state of platinum. The selectivity of n-dodecane is determined by the number of Brønsted acid sites and Pt crystal planes. These conclusions are verified by combining transmission electron microscopy, high-resolution transmission electron microscopy, hydrogen temperature programmed reduction, NH3-temperature programmed desorption, and Py-IR studies. The catalyst prepared with Pt(NH3)4(NO3)2 as the precursor exhibits the smallest platinum particle size and the highest platinum dispersion. Most of the platinum particles are supported on the external surface of SAPO-11 with the Pt(111) crystal face. Such a catalyst also possesses a suitable number of Brønsted acid sites and then displays the best catalytic performance. Obviously, the use of various precursors for the Pt-based catalyst can significantly affect the performance of Pt/SAPO-11 for the hydroisomerization of n-dodecane.
✓ 已验证
DOI
高影响因子
Advanced Electronic Materials
·
2021
·Vol. 7
·期 3
·2001003
·
IF 7.295
Zuoxiang Xie,Kai Feng,Yan Xiong,Xu Chen,Yudong Liang,Kamran Abid,Ling Xu
In recent years, organic–inorganic hybrid halide perovskite materials have been found to have low thermal conductivity and a large Seebeck effect, giving them great potential for thermoelectric applications. More stable single crystals make this possible. In this work, high-quality MAPbI 3 single crystals are prepared using a modified solvent engineering method, and their trap density is as low as 2.5 × 10 9 cm −3 . It is noticed that the reaction between the crystal a metal electrode causes different degrees of doping effect along the vertical direction, leading to an increase in the intrinsic P-type with Au metal, and forming N-type semiconductor characteristics with Ag metal. A high Seebeck voltage thermoelectric module is obtained by combining the perovskite single crystal with different conductive characteristics. After device optimization, the thermoelectric potential of the champion module reaches a high voltage of 337 mV at 115 °C, the maximum output power with load reaches about 30 nW, and the theoretical maximum power reaches 65 nW. It is hoped that this research can promote the development of low thermal conductivity perovskite materials in the thermoelectric field.
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 23
·8142-8154
·
IF 4
You-Hui Zhao,Hai-Yan Li,David James Young,Xiangqian Cao,Da-Liang Zhu,Zhi-Gang Ren,Hong-Xi Li
Earth-abundant copper(I) coordination complexes of an imine-phosphine and a diimine have been developed as visible-light photocatalysts. Reaction of [Cu(MeCN)4]BF4 with hetero-bidentate phosphinopyrazole (phpz) ligand R1R2C3HN2PPh3 (R1 = R2 = H (1a); R1 = H, R2 = Me (1b); R1 = H, R2 = Ph (1c); R1 = R2 = Me (1d)) and 2,9-dimethyl-1,10-phenanthroline (dmp) gave four heteroleptic bis-chelate Cu(I) complexes [Cu(dmp)(R1R2C3HN2PPh3)]BF4 (R1 = R2 = H (2a); R1 = H, R2 = Me (2b); R1 = H, R2 = Ph (2c); R1 = R2 = Me (2d)) with distorted tetrahedral geometries. Complexes 2a–2d exhibited broad absorption in the visible spectrum and could facilitate photochemical intermolecular atom-transfer radical addition reactions of CBr4, or CCl3Br, CHI3 to styrenes in yields up to 91% and with a broad substrate scope. The absorption, emission, redox potential and photocatalytic activity were dependent on the substituents on the phpz ligand. Mechanistic studies supported an atom-transfer radical addition (ATRA) mechanism.
✓ 已验证
DOI
高影响因子
FUEL
·
2022
·
IF 8.035
Yi-Ming Gu,Ya-Hui Wang,Sheng-Sheng Zhao,Hong-Jun Fan,Xiao-Wei Liu,Zhiping Lai,Shu-Dong Wang
Carbon capture from flue gases is one of the crucial routines for reducing current CO 2 emissions and mitigating the greenhouse effect. Metal-organic frameworks (MOFs) have received a lot of interest as efficient solid adsorbents for CO 2 /N 2 separation in flue gas treatment. However, many MOF materials are susceptible to the presence of water vapor, which has a significant impact on their adsorption efficacy and moisture stability. Here in this work, we reported two pillar-layered Zn-MOFs with N -donors, i.e., Zn 2 (TRZ) 2 (Fuma) and Zn 2 (TRZ) 2 (BDC), which demonstrated high CO 2 uptakes (3.92 and 1.52 mmol/g) and CO 2 /N 2 (132 and 20.5) adsorption selectivities at 298 K and 101 kPa, among the best comprehensive results reported by far. After seven days of exposure to a 100 % RH environment, it was found that, the Zn-N pillar contributes to the robust structure of MOFs . Furthermore, in-depth theoretical calculations indicated the guest-framework interactions, and dynamic sorption tests confirmed high working capacities (2.78 and 1.14 mmol/g), sufficient water stability and remarkable cycling performance of the studied MOFs under humid ambient conditions. We believe this work provides a routine to prepare robust and promising candidates to address the challenge in carbon capture under humid conditions.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2018
·
IF 4.439
Yue-E Miao,Jiajie Yan,Yue Ouyang,Hengyi Lu,Feili Lai,Yue Wu,Tianxi Liu
The bio-inspired hierarchical “grape cluster” superstructure provides an effective integration of one-dimensional carbon nanofibers (CNF) with isolated carbonaceous nanoparticles into three-dimensional (3D) conductive frameworks for efficient electron and mass transfer. Herein, a 3D N-doped porous carbon electrocatalyst consisting of carbon nanofibers with grape-like N-doped hollow carbon particles (CNF@NC) has been prepared through a simple electrospinning strategy combined with in-situ growth and carbonization processes. Such a bio-inspired hierarchically organized conductive network largely facilitates both the mass diffusion and electron transfer during the oxygen reduction reactions (ORR). Therefore, the metal-free CNF@NC catalyst demonstrates superior catalytic activity with an absolute four-electron transfer mechanism, strong methanol tolerance and good long-term stability towards ORR in alkaline media.
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Shiying Lin,Lanlan Mo,Feijun Wang,Ziqiang Shao
Heteroatom doping is a significant modification of carbon materials for electrodes in storage device and co-doping has synergistic improvement effect. This work reports a N/O co-doped porous carbon (CPK800) from crosslinking sodium carboxymethyl cellulose and poly (m-phenylene diamine). The material characterization reveals its large specific surface area of 1501.3 m 2 g −1 with optimum micro- and mesopore distribution, partially graphitized carbon and high N, O concentration. This carbon has 3D interconnected porous structure and internal conducting network providing rapid ion and electron transportation. Take these advantages, it exhibits high capacitance of 358 F/g at 1 A g −1 , an excellent rate retention of 70.8% at a high current density of 20 A g −1 , and superior cyclic stability of 97.8% capacitance retention after 10,000 cycles at 10 A g −1 as an electrode material in 3 M KOH electrolyte. Moreover, the assembled symmetric supercapacitor device (CPK800//CPK800) delivers a high energy density of 11.5 Wh kg −1 at a power density of 326.8 W kg −1 and still have energy density of 8.9 Wh kg −1 at a very high power density of 6.8 kW kg −1 . The well-developed structure and outstanding electrochemical performance demonstrate the promising potential of CPK800 as electrode material for advanced energy storage devices.
✓ 已验证
DOI
高影响因子
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
·
2022
·
IF 6.76
Guangjian Peng,Yahao Hu,Guijing Dou,Yiheng Sun,Yong Huan,Sung Hoon Kang,Zhongyu Piao
Microencapsulated phase change materials (MPCMs) are often mixed with matrix materials to form phase change composites for energy storage. Typically, MPCMs are easily debonded from the matrix or ruptured, thereby weakening the mechanical properties of composites. This paper aims to simultaneously improve the rupture strength of microcapsules and the bonding strength between microcapsules and matrix to enhance the mechanical properties of composites. The titanium dioxide (TiO 2 ) nanoparticles modified by a silane coupling agent (KH560) were doped into the melamine formaldehyde (MF) shell, forming n-octadecane@MF/TiO 2 hybrid shell MPCMs (HS-MPCMs). The doping of modified TiO 2 nanoparticles reduced supercooling and improved the thermal stability of microcapsules. Compared with MF microcapsules, the rupture strength of HS-MPCMs was increased by an average of 30.4%. The modified TiO 2 nanoparticles also built covalent bonds between microcapsule shell and matrix, which led to better microcapsule/epoxy interface bonding. Thus, the HS-MPCMs/epoxy composites performed higher tensile strength than the unmodified composites. Specifically, the tensile strength of composites was improved by an average of 17.2% at the microcapsule content of 10 wt.% with the aid of the MF/TiO 2 hybrid shell. The reinforced MPCMs/epoxy composites are expected to be used as anti-icing coatings in the aerospace field.
✓ 已验证
DOI
高影响因子
Chemistry-An Asian Journal
·
2017
·Vol. 12
·期 23
·3039-3045
·
IF 4.083
Yan Sun,Tao Wang,Ang Li,Ling Zhang,Qisheng Huo,Zhen-An Qiao
Graphical A simple and straightforward route is reported to knit benzene heterocycles to synthesize a series of hierarchical porous polymers with high surface area and abundant N sites. The N-doped porous polymers can effectively stabilize ultra-small Pd nanoparticles for solvent-free catalysis. Hierarchical porous polymers with more than one pore size distributions can effectively support noble metal catalysts and circumvent the limitation of the diffusion of the reactants, and thus exhibit both excellent catalytic activity and superior diffusive properties. Herein, we report a simple one-step Friedel–Crafts reaction to knit a series of benzene heterocycle monomers, such as indane, indoline, indole and tetrahydronaphthalene to obtain hierarchical porous polymers with high surface areas and/or abundant N sites. These polymers can be directly used to immobilize Pd ions, and stabilize Pd nanoparticles during the thermal reduction process to obtain Pd/polymer catalysts. In particular, indoline- and indole-based polymers with high N content up to 7 wt % exhibit outstanding ability to stabilize uniform ultrasmall Pd nanoparticles. The obtained Pd-polymers exhibit excellent catalytic activity in the solvent-free oxidation of benzyl alcohol with O 2 .
✓ 已验证
DOI
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2024
·
IF 5.7
Yong Wang,Ziyuan Wang,Huifen Yu,Haidong Teng,Jianping Wu,Jiaqi Xu,Lirong Yang
Lipase from Rhizopus oryzae (ROL) exhibits remarkable sn-1,3 stereoselectivity and catalytic activity, but its poor thermostability limits its applications in the production of 1,3-dioleoyl-2-palmitoyl glycerol (OPO, a high-quality substitute for human milk fat). In this work, a semirational method was proposed to engineer the thermostability and catalytic activity of 4M (ROL mutant in our previous study). First, a computer-aided design is performed using 4M as a template, and N-glycosylation mutants are then recombinantly expressed and screened in Pichia pastoris, the optimal mutant N227 exhibited a half-life of 298.8 h at 45 °C, which is 7.23-folds longer than that of 4M. Its catalytic activity also reached 1043.80 ± 61.98 U/mg, representing a 29.2% increase compared to 4M (808.02 ± 47.02 U/mg). Molecular dynamics simulations of N227 suggested that the introduction of glycan enhanced the protein rigidity, while the strong hydrogen bonds formed between the glycan and the protein stabilized the lipase structure, thereby improving its thermostability. The acidolysis reaction between oleic acid (OA) and glycerol tripalmitate (PPP) was successfully carried out using immobilized N227, achieving a molar conversion rate of 90.2% for PPP. This engineering strategy guides the modification of lipases, while the glycomutants obtained in this study have potential applications in the biosynthesis of OPO.
✓ 已验证
DOI
PubMed
高影响因子
Nano-Micro Letters
·
2020
·Vol. 12
·期 1
·1-12
·
IF 12.264
Wei Feng,He Xiaojun,Ma Lianbo,Zhang Hanfang,Xiao Nan,Qiu Jieshan
A green low-cost route without the acid washing step is used to prepare the N,O-codoped egg-box-like carbons.
The obtained carbons possess moderate N, O contents and tuned transfer channels with three-dimensional (3D) egg-box-like structures.
The fabricated electrode exhibits high areal capacitance and long-term cycle stability.
✓ 已验证
DOI
高影响因子