COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Li Guo,Zijie Liu,Junshan He,Yanzhong Wang
Three-dimensional Ni-TDA@rGO composite aerogels were synthesized by a one-step solvothermal method. • The interconnected porous rGO conductive network enhances the electrical conductivity of Ni-TDA. • Ni-TDA@rGO-20 has a specific capacitance of 117.36 mAh g⁻¹ at 0.5 A g −1 . Designing high-conductivity and structurally stable MOF composites with abundant accessible active sites still faces great challenges. Herein, Ni-TDA@rGO composite aerogels are prepared via a simple one-pot solvothermal method. The introduced rGO constructs a continuous 3D conductive network to accelerate charge transport, and the hierarchical porous structure ensures full electrolyte contact and sufficient exposure of electroactive sites. The obtained electrode delivers a high specific capacity of 117.36 mAh g⁻¹ at 0.5 A g⁻¹. The assembled asymmetric supercapacitor achieves an energy density of 31.6 Wh kg⁻¹ at 795 W kg⁻¹, and retains 90% capacity after 10000 cycles. The outstanding electrochemical performance is attributed to the synergistic effect of rGO, which effectively prevents MOF aggregation and greatly accelerates electron and ion diffusion. This work offers a feasible strategy for developing advanced electrode materials, and MOF-based composites possess broad application prospects in high-efficiency energy storage devices. Download: Download high-res image (217KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CRYSTENGCOMM
·
2026
·
IF 2.4
Jicong Lin,Yushu Dai,Jintao Xu,Mengjie Xu,Xieming Xu,Hao Lu,Shaofan Wu,Shuaihua Wang
LiLuF4 microcrystalline scintillation materials possess several advantages, including high chemical stability, simplified fabrication processes, and tunable emission wavelengths. These materials demonstrate significant potential in fields such as X-ray imaging, biodiagnostics, photodynamic therapy, advanced anti-counterfeiting, and thermally activated delayed imaging. However, the relatively weak radioluminescence intensity of single rare-earth-doped LiLuF4 crystals has constrained their practical applications. In this work, Ni2+ co-doped LiLuF4:Tb microcrystalline scintillators are synthesized via a hydrothermal method. The incorporation of heterovalent Ni2+ ions effectively enhanced both the radioluminescence and thermoluminescence intensities of LiLuF4 microcrystals. After doping with 3 mol% Ni2+ ions, the radioluminescence intensity increased by 125.34%. The X-ray detection limit of LiLuF4:Tb,Ni reaches 3.7966 nGy s−1, which is considerably lower than the medical imaging requirement of 5.5 μGy s−1. Furthermore, a large-area flexible composite scintillation film of dimensions 80 mm × 145 mm was prepared to achieve high-spatial-resolution X-ray imaging of 25 LP mm−1@20% MTF, indicating that heterovalent-doped fluoride scintillators possess exceptional application potential.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE ENERGY INSTITUTE
·
2026
·
IF 6.5
Weixin Xu,Shuomei Wang,Songze Wang,Wenqi Sang,Chen Fan,Sicong Tian,Zongguo Wen,Lujia Han
Thermochemical conversion of lignocellulosic biomass into syngas contributes to renewable hydrogen and carbon utilization, advancing the development of carbon-neutral energy solutions. However, the current biomass gasification process suffers from high energy consumption due to the need for excessive steam input. In this study, a series of CeO 2 -supported Ni catalysts with tailored oxygen vacancy concentrations was prepared by doping Gd, Zr, and La as promoters into the support, aiming to enable the catalytic self-reforming of real biomass volatiles without exogenous steam. Comprehensive characterization techniques, including electron paramagnetic resonance (EPR), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), revealed the critical role of surface oxygen vacancy concentration in determining the catalytic activity. The optimized 10Ni/CeLaO 2 catalyst achieved a total crude syngas yield of 15.4 mmol·g straw −1 at 700 °C, which is 70.4% higher than the non-catalytic system and 20.1% higher than undoped 10Ni/CeO 2 . Moreover, it also exhibits excellent stability with 87.3% oxygen vacancy retention and minimal carbon deposition (0.09 g g H2 −1 ) after reaction. This study provides key insights into the potential of employing oxygen vacancy engineering for efficient biomass thermochemical conversion without exogenous steam input.
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·
IF 7.6
Tao Wang,Qiudi Zhang,Xupeng Zhu,Yasi Wang,Mengjie Zheng,Jing Wang,Wenbo Liu,Yahui Wang,Xiaojun Pan,Huimin Shi
Transition-metal-based catalysts with asymmetric coordination structures are promising candidates for industrial oxygen evolution reactions. However, the large-scale synthesis of catalysts with precisely constructed asymmetric coordination structures is still challenging. Herein, we developed an industry-compatible roll-to-roll combustion technology to synthesize NiFc–MOFs with reasonably constructed asymmetric Fe–O–Ni coordination. Owing to the modulated electronic spin states, regulated adsorption configurations of oxygen-containing intermediates, and charge redistribution, the as-prepared NiFc–MOF achieved ultralow overpotentials of 196 mV and 257 mV at η10 and η1000, respectively. The long-term stability evaluation of catalysts in a three-electrode system demonstrates excellent durability of 2000 h at 2 A cm–2. Further, the assembled anion exchange membrane water electrolyzer (AEMWE, NiFc–MOF||R–Ni) operated at a current density of 1 A cm–2 achieved high overall water splitting with a low cell voltage of merely 2 V and maintained outstanding durability for over 500 h under ambient atmosphere. More importantly, the NiFc–MOF maintained high stability for over 250 h at 1 A cm–2 in simulated seawater. This study offers a reliable pathway to the large-scale synthesis of low-cost NiFe-based catalysts for ampere-level oxygen evolution in both pure and seawater.
✓ 已验证
DOI
高影响因子
Journal of Cleaner Production
·
2026
·
IF 10.7
Zheng Zhang,Ying Yang,Jiayi Zhang,Yunyi Zhang,Xiaohan Jin,Xiaoqi Zhang,Luna Niu,He Liu,Aijun Guo
The escalating crisis of global plastic pollution underscores an urgent need for truly sustainable and closed-loop technological solutions. While chemical recycling presents a promising route, its current reliance on fossil-derived hydrogen fundamentally undermines the process's environmental rationale. Herein, an innovative cascade catalytic system is introduced that directly addresses this challenge by employing the water-gas shift reaction (WGSR) as an in-situ hydrogen source. This integrated strategy enables the efficient conversion of polypropylene (PP) waste into high-value liquid fuels (C 5 -C 22 ). The process is driven by a rationally designed bifunctional catalyst, Ni-Fe 3 O 4 /USY. The reducible Fe 3 O 4 continuously generates active hydrogen species through the WGSR, while Ni finely tunes the redox properties required for CO activation. Concurrently, the acidic sites of the USY zeolite facilitate the selective cleavage of C-C bonds in the polymer chain. The results show that the well-designed tandem reaction achieves >99% conversion of post-consumer PP waste and a remarkably high liquid fuel yield of 83.2% under relatively mild conditions (340 °C). This study establishes a green and intensified pathway for plastic valorization, fundamentally circumventing the dependency on external fossil-based hydrogen and paving the way for more sustainable chemical recycling paradigms.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2026
·
IF 19.7
Muhammad Rafiq,Sami Ur Rahman,Wenjuan Xu,Shehna Farooq,Jiangyan Dang,Muhammad Saad,Omme Habiba Abbasi,Adel Al-Salihy,Wenliang Li,Jingping Zhang
Fe@CoP-NSs/CP is synthesized and shows superior OER activity (272 mV at 10 mA cm⁻²). • DFT reveals Fe doping optimizes the d -band center (-1.92 eV) and adsorption energetics of Fe@CoP-NSs/CP. • DHS-OPM on Fe-Co sites of Fe@CoP-NSs/CP achieves a low overpotential of 0.35 V, outperforming AEM. • Fe@CoP-NSs/CP exhibits excellent stability over 30 h tested by chronoamperometry. • Machine learning identifies TM-OOH* and RDS as key predictors of catalytic efficiency (ROC-AUC up to 0.99). The oxygen evolution reaction (OER) remains a critical bottleneck for efficient oxygen production via water splitting due to its sluggish kinetics and high overpotential. Herein, we systematically investigated the OER mechanism on 3d transition metal-doped (Iron, Nickle, and Manganese) and pristine cobalt phosphide nanosheet carbon paper supported (Fe@CoP-NSs/CP, Ni@CoP-NSs/CP, Mn@CoP-NSs/CP, and CoP-NSs/CP) through a density functional theory (DFT) and experimental approach. The DFT calculations reveal that doping modulates the electronic structure of Fe@CoP-NSs/CP among the investigated systems exhibiting a d-band center closest to the Fermi level (-1.92 eV), leading to optimized adsorption energetics for key intermediates. Mechanistic mapping identifies the Dual Hetero-Site Oxide Path Mechanism (DHS-OPM) as the dominant pathway. In this mechanism, Fe-Co bimetallic sites achieve a remarkably low overpotential of 0.35 V, significantly outperforming the Adsorbate Evolution Mechanism (AEM). Experimentally, Fe@CoP-NSs/CP shows superior OER activity with an overpotential of 272 mV at 10 mA cm −2 and a Tafel slope of 47.4 mV dec −1 , with excellent stability over 30 h. Furthermore, supervised machine learning identifies TM-OOH* and rate-determining step (RDS) energies as the key predictors of catalytic efficiency, achieving ROC-AUC values up to 0.99. This work establishes a DFT-driven mechanistic framework, demonstrating that Fe@CoP-NSs/CP provides a highly efficient and durable pathway for OER. Download: Download high-res image (185KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Lixin Wang,Renjie Ji,Chunge Wang,Fanbo Meng,Zhongwu Luo,Mengran Wang,Hui Jin,Shijie Yang,Shi’an Zhao,Dahao Han,Yongjie Cheng,Tianyu Liu,Jianmin Ma,Yonghong Liu
To address the limited activity and durability of oxygen evolution reaction (OER) electrocatalysts, we present an integrated in situ strategy for constructing a three-dimensional Ni-Co dendritic electrode matrix coupled with a surface amorphous Ni-Co-Fe layered double hydroxide (LDH) catalytic layer. A Ni-Co dendritic matrix (NCDEM) with enhanced electrolyte accessibility and mass transport properties is first fabricated via jet electrodeposition, followed by the in situ hydrothermal growth of Ni-Co-Fe LDH nanosheets to construct a Ni-Co-Fe dendritic electrode (NCFDE). The introduction of NaBO₂ during the hydrothermal process regulates surface etching kinetics and the Fe³ ⁺ coordination environment, promoting uniform nanosheet growth and triggering the crystalline-to-amorphous transition of the LDH structure. The amorphous LDH layer increases the accessible active surface area, facilitates the formation of reconstructed NiOOH active species during OER, and enhances structural stability during prolonged electrochemical operation. The optimized B2-NCFDE exhibits outstanding OER performance in 1 M KOH, requiring an overpotential of only 215.34 mV to achieve 100 mA cm⁻², with a Tafel slope of 38.29 mV dec⁻¹ and stable operation at 500 mA cm⁻² for 2000 h. Furthermore, the B2-NCFDE||B2-NCFDE electrolyzer achieves 100 mA cm⁻² at a cell voltage of 1.822 V and demonstrates excellent durability for overall water splitting. This work provides a scalable strategy that integrates electrode architecture engineering with amorphous LDH regulation for efficient and durable hydrogen production.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 9.2
Youcheng Xiao,Zihan Huo,Long Yuan,Tianmin He,Hong Chen,Di Bao,Xiaotian Yang
Proton-conducting fuel cells (PCFCs) operate at reduced temperatures and exhibit broad fuel adaptability. The development of triple-conducting cathodes has been demonstrated as an effective approach to enhance electrochemical performance. Nowadays, the low-cost iron-based BaFeO 3- δ perovskite has attracted attention due to its favorable mixed conductivity and ORR activity, yet intrinsic lattice distortion impedes ion transport and limits its practical application in PCFC. Herein, a series of Y/Ni co-doped cobalt-free BaFe 0.9- x Y 0.1 Ni x O 3- δ perovskites are systematically designed and investigated as novel triple-conducting (H + /O 2− /e − ) PCFC cathodes via synergistic cation co-doping. Among the prepared samples, BFYNi 0.15 exhibits an enriched concentration of oxygen vacancies, enhanced hydration capacity, and superior triple conductivity, delivering a low polarization resistance of 0.41 Ω cm 2 in humid air at 700 °C. When coupled with a BaZr 0.4 Ce 0.4 Y 0.15 Zn 0.05 O 3- δ electrolyte, the corresponding single cell achieves a peak power density of 548 mW cm −2 at 700 °C and maintains stable operation.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2026
·
IF 3.9
Bao Zien,Ren Xiaohong,Rong Zeming
The selective upgrading of lignin-derived compounds into
high-value
chemicals remains a critical challenge. In this study, a series of
Ni-based catalysts supported on Hβ zeolite and modified with
secondary metals (Zn, Fe, and Cu) were synthesized and systematically
evaluated for the catalytic conversion of 4-propylguaiacol in aqueous
phase under hydrogen-free conditions. Among the catalysts studied
at 220 ° C for 2 h, Ni/Hβ delivered a conversion of 36.1%
and a phenolic selectivity of 89.6%. By comparison, NiZn/Hβ
exhibited the highest catalytic activity, achieving a conversion of
82.9% with a selectivity of 96.5%, indicating the promotional effect
of Zn incorporation. NiFe/Hβ showed a moderate conversion of
45.5% but maintained a high phenolic selectivity of 97.6%. However,
NiCu/Hβ showed almost no catalytic activity, with a conversion
of only 2.0%. Structural characterization by XRD, XPS, N 2 physisorption, H 2 -TPR, SEM, and TEM revealed that the
introduction of Zn significantly improved the dispersion of Ni species
and reduced Ni crystallite size, thereby increasing the number of
accessible active sites. In contrast, Fe incorporation altered the
catalyst structure and reduced catalytic activity, while Cu addition
induced metal aggregation and markedly suppressed catalytic performance.
The results indicate that appropriate second-metal modification can
effectively regulate the metal dispersion, microstructure, and metal–support
interactions in Ni/Hβ catalysts, thereby influencing the hydrogen
activation ability and the cleavage of Ar–CO 3 bonds.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2026
·Vol. 32
·期 8
·8731-8740
·
IF 3.4
Xiu Xuezheng,Chen Wenxue,Zhang Yanjia,Han Lina,Tan Haotian,Gao Yuqian,Wang Jinlin,Gao Hongfu,Li Yanan,Zeng Xiaoyuan
The recovery and reuse of metals from electronic waste for catalyst preparation represents a promising strategy for addressing both energy crises and environmental pollution. In this study, nickel and cobalt were extracted from spent lithium-ion battery powder using a deep eutectic solvent, and the leachate was directly converted into an oxygen evolution reaction (OER) catalyst through electrodeposition without intermediate purification steps. The catalyst structure and electrochemical performance were systematically characterized. TEM/EDS confirmed the uniform distribution of nickel-cobalt alloy nanoparticles on carbon paper. Electrochemical measurements in 1 M potassium hydroxide electrolyte demonstrated that the optimized Ni x Co y (ox)(H 2 O) 2 /CP catalyst achieved overpotentials of 328 mV, 353 mV, and 375 mV at current densities of 10 mA cm⁻ 2 , respectively. The best-performing sample, Ni 5 Co 5 (ox)(H 2 O) 2 /CP-(-50)-30, exhibited catalytic activity approaching that of RuO 2 on the same substrate (303 mV overpotential), indicating significant potential for water splitting applications. Furthermore, the catalyst maintained 97% of its initial current density after 80 h of continuous OER operation, demonstrating excellent long-term stability. Graphical abstract
✓ 已验证
DOI
高影响因子
POWDER TECHNOLOGY
·
2025
·
IF 4.6
Junlei Wang,Shilong Li,Wen Du,Yunfei Xu,Jinyu Li,Kun Wang
The conventional co-precipitation wet chemical method for preparing LiNi x Co y Mn 1-x-y O 2 (NCM) cathode materials for lithium-ion batteries starts with the synthesis of Ni-Co-Mn hydroxide precursors, which are then calcined at high temperatures and thermally decomposed into oxides , followed solid-state reacting with lithium sources to obtain the NCM cathode materials. However, this hydroxide precursor route has several drawbacks, including multiple processing steps, pollution from strong bases, significant generation of liquid waste, and high energy consumption. In the current study, the Ni-Co-Mn oxide precursor route is explored via flame-assisted spray pyrolysis (FASP), which offers prompt reaction time, very few steps, and equipment without producing liquid wastes. Specifically, two types of oxide precursors, NiCoMnO 4 and Ni 0.8 Co 0.1 Mn 0.1 O 1.1 , were synthesized by FASP utilizing the co-flow diffusion flame burner system, which were subsequently mixed with cost-effective lithium carbonate (Li 2 CO 3 ) and subjected to calcination , resulting in the preparation of two types ternary NCM cathode materials, NCM111 and NCM811. Characterization results demonstrate that NiCoMnO 4 features a spherical mesoporous structure with a smooth surface, and a spinel-dominated composite oxide structure, whereas Ni 0.8 Co 0.1 Mn 0.1 O 1.1 exhibits a rough particle surface with a predominant rock salt phase NiO structure. Electrochemical test results show that NCM111 and NCM811 cathode materials exhibited excellent cycling stability, showing capacity retention of 88.5 % and 87.1 %, respectively, after 100 cycles, outperforming that of commercial counterparts and conventional synthesis approaches documented in literature. Thus, the Ni-Co-Mn oxide precursor route via FASP establishes a viable approach for preparing ternary NCM cathode materials
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2025
·Vol. 16
·期 1
·1-12
·
IF 15.7
Luo Jiayao,Guo Bangjun,Li Nana,Huang Qianjin,Wang Jingjing,Fu Yongzhu,Jia Linan,Zhang Xi,Hou Junbo,Zhu Jinhui,Zhuang Xiaodong
Coating Ni-rich layered oxide positive electrodes is essential to improve their electrochemical performance in sulfide-based all-solid-state Li batteries, but achieving cost-effective, high-performance positive electrodes remains challenging. In this work, we apply a thin (~3 nm) conductive binary Li borate glass coating (0.5Li 2 O·0.5B 2 O 3 ) onto single-crystal LiNi 0.8 Co 0.1 Mn 0.1 O 2 using a simple dry process and heating. This coated positive electrode delivers 209 mAh g −1 specific capacity at a specific current of 20 mA g −1 with 79.7% initial Coulombic efficiency, retains 87.8% capacity after 1000 cycles at a specific current of 200 mA g −1 , and achieves 14.6 mAh cm −2 areal capacity. Pouch cells with this positive electrode reach 383 Wh kg −1 specific energy, and sustain 300 cycles at a specific current of 66.67 mA g −1 . Various characterizations reveal that this coating can enhance Li-ion transport, stabilize the positive electrode lattice, and strengthen the interface between positive electrode and sulfide electrolyte. Here we show that conductive glass coatings enable high-voltage positive electrodes with high stability and specific energy in all-solid-state batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子